李卫东，Weidong Li

出生年月
1977.6
籍贯
四川省青神县

职称
副教授，博士生导师
学历
博士

电话

办公室
新主楼B421

系别
飞行器制造工程系
职务
无

电子信箱
space@buaa.edu.cn
传真


个人主页
http://shi.buaa.edu.cn/lwd/zh_CN/index.htm

◆学习经历

1996.09-2000.07 北京航空航天大学 机械工程及自动化学院 学士
2000.09-2002.07 北京航空航天大学 机械工程及自动化学院 提前攻博
2002.09-2007.05 北京航空航天大学 机械工程及自动化学院 博士

◆工作经历

2009.06-至今 北京航空航天大学机械工程及自动化学院飞行器制造工程系讲师，副教授
2014.02-2015.02 University of Toronto, Department of Material Science and Engineer, 公派访问
2007.05-2009.06 北京航空航天大学机械工程及自动化学院机械工程博士后

◆研究领域

l 航空制造智能工艺及仿真建模
面向航空薄壁构件精确成形制造，研究数控成形工艺设计、变形协调、缺陷控制、工艺建模、工艺优化与软件开发，建立了航空数字化制造和仿真技术体系，开发了一系列智能工艺软件系统，应用到多个型号飞机研制与生产。

l 航空整体结构件精确成形与形性协同
针对飞机和发动机整体结构件成形精度和性能质量要求高的需求，揭示航空整体结构件多约束耦合变形协调机制，重点解决变形缺陷预测与精确调控、空心结构设计-超塑成形一体化等难题，实现整体结构件形性协同制造。


◆荣誉及奖励

2006年，国防科学技术进步二等奖
2009年，北京航空航天大学“蓝天新秀”
2010年，四川省科技进步三等奖
2018年，北京航空航天大学教学成果一等奖

◆开授课程

《流体传动》（本科生）
《Hydrodynamics and Hydraulics》（国际学生）
《Special Design》（国际学生）
《有限元分析软件应用实验》（研究生）

◆教学及科研成果

1代表性科研项目
（1）201801-202012，球形高筋壁板渐进模压变形缺陷调控与加载路径优化，国家自然科学基金，负责
（2）201707-201711，喷丸成形工艺设计系统开发，中航工业科技攻关，负责
（3）201603-201708，基于XX的蒙皮拉形工艺设计系统开发及应用，中航工业科技攻关，负责
（4）201508-201708，整体壁板喷丸工艺几何信息分析软件系统，中航工业科技攻关，负责
（5）201602-201604，空心结构超塑成形-冷却过程数值模拟研究，中航工业科技攻关，负责
（6）201508-201712，时效成形性能测试及回弹模型设计，中航工业科技攻关，负责
（7）201307-201412，民用飞机平尾壁板时效成形建模仿真与参数优化，中国商飞创新基金，负责
（8）201302-201412，C919客机蒙皮拉形精确制造技术研究，中航工业科技攻关，负责
（9）201101-201212，蠕变时效成形过程有限元模拟技术研究，工信部民机专项子课题，负责
（10）201101-201312，网格高筋整体壁板压弯成形建模仿真与路径优化技术研究，国家自然科学基金，负责
2代表性期刊论文
(1)Lixia Ma, Weidong Li^*, Min Wan et al. Constitutive modeling and processing map for hot deformation of Ti-15Mo-3Al-2.7Nb-0.2Si. Journal of Alloys and Compounds, 2019, 808.
(2) Weidong Li, Lixia Ma, Min Wan et al. Modeling and simulation of machining distortion of pre-bent aluminum alloy plate, Journal of Materials Processing Technology, 2018, 258:189-199.
(3) Weidong Li, Lixia Ma, Peng Peng et al. Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint, Materials Science & Engineering A, 2018, 717: 124-133.
(4) Weidong Li, Bao Meng*, Chu Wang et al. Effect of pre-forming and pressure path on deformation behavior in multi-pass hydrodynamic deep drawing process. International Journal of Mechanical Sciences, 2017, 121: 171-180.
(5) Jingwen Peng, Weidong Li*, Min Wan et al. Investigation on three-roller cylindrical bending of 2060-T8 Al-Li alloy plate for aircraft fuselage skin components, International Journal of Material Forming, 2018, 11(2):269-278.
(6) Fei Gao, Weidong Li*, Bao Meng et al. Rheological law and constitutive model for superplastic deformation of Ti-6Al-4V. Journal of Alloys and Compounds, 2017, 701: 177-185.
(7) Hua Luo, Weidong Li*, Chao Li et al. Investigation of creep-age forming of aluminum lithium alloy stiffened panel with complex structures and variable curvature. International Journal of Advanced Manufacturing Technology, 2017, 91:3265–3271.
(8) Lang Xu, Weidong Li*, Xiufeng Wang et al. Plastic deformation behavior in laser bending of elastic pre-loaded metal plate, International Journal of Advanced Manufacturing Technology, 2017, 90(9), 3397-3406.
(9) Qiang Jia, Wei Guo, Weidong Li*, Peng Peng, Ying Zhu, Guisheng Zou, Yun Peng, Zhiling Tian, Experimental and numerical study on local mechanical properties and failure analysis of laser welded DP980 steels, Materials Science and Engineering: A, 2017, 680: 378-387.
(10) Qiang Jia, Wei Guo, Weidong Li*, Ying Zhu, Peng Peng, Guisheng Zou, Microstructure and tensile behavior of fiber laser-welded blanks of DP600 and DP980 steels, Journal of Materials Processing Technology, 2016, 236: 73-83.
(11) Jingwen Peng, Weidong Li*, Jinquan Han et al. Kinetic locus design for longitudinal stretch forming of aircraft skin components. International Journal of Advanced Manufacturing Technology, 2016, 86(9-12): 3571-3582.

◆学术与社会服务
无


Curriculum Vitae (CV)

Weidong Li（Dr）
Associate Professor, PhD Supervisor
Email:latho@buaa.edu.cn, Tel:+86-

Area of Specialization
Intelligent modelling and process planning for sheet metal forming of aeronautics manufacturing; Precision forming and coordination of shape and performance for aeronautics structures

Professinal Experiences
2009.06-Present, School of Mechanical Engineering and Automation, Beihang University
2014.2-2015.2, Visiting Scholar, Department of Material Science and Engineering, University of Toronto
2007.05-2009.05, Post doctor, Mechanical Engineer, Beihang University

Education
2000.09-2007.05, Ph.D, Mechanical Engineering, Beihang University
1996.09-2000.07, Bachelor, Mechanical Engineering, Beihang University

Courses Lectured
Hydraulics and Pneumatics (Undergraduate students)
Hydrodynamics and Hydraulics (International undergraduate students)
Special Design (International undergraduate students)
Practice Application with ABAQUS (Graduate students)

Recent Publications
(1)Lixia Ma, Weidong Li^*, Min Wan et al. Constitutive modeling and processing map for hot deformation of Ti-15Mo-3Al-2.7Nb-0.2Si. Journal of Alloys and Compounds, 2019, 808.
(2) Weidong Li, Lixia Ma, Min Wan et al. Modeling and simulation of machining distortion of pre-bent aluminum alloy plate, Journal of Materials Processing Technology, 2018, 258:189-199.
(3) Weidong Li, Lixia Ma, Peng Peng et al. Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint, Materials Science & Engineering A, 2018, 717: 124-133.
(4) Weidong Li, Bao Meng*, Chu Wang et al. Effect of pre-forming and pressure path on deformation behavior in multi-pass hydrodynamic deep drawing process. International Journal of Mechanical Sciences, 2017, 121: 171-180.
(5) Jingwen Peng, Weidong Li*, Min Wan et al. Investigation on three-roller cylindrical bending of 2060-T8 Al-Li alloy plate for aircraft fuselage skin components, International Journal of Material Forming, 2018, 11(2):269-278.
(6)Fei Gao, Weidong Li*, Bao Meng et al. Rheological law and constitutive model for superplastic deformation of Ti-6Al-4V. Journal of Alloys and Compounds, 2017, 701: 177-185.
(7) Hua Luo, Weidong Li*, Chao Li et al. Investigation of creep-age forming of aluminum lithium alloy stiffened panel with complex structures and variable curvature. International Journal of Advanced Manufacturing Technology, 2017, 91:3265–3271.
(8) Lang Xu, Weidong Li*, Xiufeng Wang et al. Plastic deformation behavior in laser bending of elastic pre-loaded metal plate, International Journal of Advanced Manufacturing Technology, 2017, 90(9), 3397-3406.
(9) Qiang Jia, Wei Guo, Weidong Li*, Peng Peng, Ying Zhu, Guisheng Zou, Yun Peng, Zhiling Tian, Experimental and numerical study on local mechanical properties and failure analysis of laser welded DP980 steels, Materials Science and Engineering: A, 2017, 680: 378-387.
(10) Qiang Jia, Wei Guo, Weidong Li*, Ying Zhu, Peng Peng, Guisheng Zou, Microstructure and tensile behavior of fiber laser-welded blanks of DP600 and DP980 steels, Journal of Materials Processing Technology, 2016, 236: 73-83.
(11) Jingwen Peng, Weidong Li*, Jinquan Han et al. Kinetic locus design for longitudinal stretch forming of aircraft skin components. International Journal of Advanced Manufacturing Technology, 2016, 86(9-12): 3571-3582.