乔爱科

乔爱科，1967年生，博士，教授。1992年至今任北京工业大学教师。主要从事生物医学工程、生物力学、CAD/CAE/CFD方面的教学和科研工作。主持和参加的科研项目包括国家自然科学基金项目共约20余项。发表论文250余篇，其中50篇被SCI收录，90余篇被EI收录，20余篇被ISTP收录。1999年12月获得国家机械局科技进步奖三等奖(第4成员)。2005年2月获得北京市科学技术奖二等奖(第2成员)。获得专利20项，软件著作权23项。编写高等学校教材3部。参与讲授的课程于2005年获得国家精品课程。2005年入选北京市优秀人才培养资助计划。
教育背景：
1985.8~1989.7 华北电力学院机械系，本科生，专业：机械制造工艺
1989.8~1992.3 北京工业大学基础部，研究生，研究方向：机械CAD
1996.8~2000.6 北京工业大学数理学院，博士生，研究方向：流体力学
工作背景：
1992.4~1999.6 北京工业大学基础部
1999.7~2007.2 北京工业大学机电学院
2007.3~ 北京工业大学生命科学与生物工程学院
2002.6~2004.5 汕头大学，在职博士后
2003.9~2005.2 日本北陆先端科学技术大学院大学，访问
主要科研项目：
(1)基于超声和CT影像的冠脉血流储备分数无创计算方法研究，国家自然科学基金(**)，2018.1-2021.12，项目负责人
(2)可降解锌合金支架的支撑性能及结构优化研究，北京市教委科技计划重点项目暨北京市自然科学基金B类项目(KZ7),2017.1.1-2019.12.31，项目负责人
(3)The sensitity analysis andmulti-objective optimization of the biodegradable zinc alloy stent. CollaborativeResearch Project, Institute of Fluid Science, Tohoku University (J17I105). 2017.3-2018.3，项目负责人
(4)大动脉调转术改进几何构型对主动脉瓣关闭不全影响的生物力学机理和手术规划研究，国家自然科学基金(**)，2015.1-2018.12，项目负责人
(5)椎动脉支架再狭窄的血流动力学仿真和实验研究，国家自然科学基金(**)，2012.1-2015.12，项目负责人
(6)颅内动脉瘤新型裸支架的血流动力学研究，国家自然科学基金(**)，2010.1-2012.12，项目负责人
(7)旁路搭桥转流术治疗DeBakey III型主动脉夹层的数值模拟研究，国家自然科学基金(**)，2008.1-2010.12，项目负责人
(8)动脉瘤支架流阻的计算和实验研究，北京市自然科学基金(**)，2009.1-2011.12 ，项目负责人
(9)动脉瘤支架治疗新技术的血流动力学研究，北京市自然科学基金(**)，2006.1-2008.12，项目负责人
主要论文：
(1)Fu W, Xia Q, YanR, Qiao A(*). NumericalInvestigations of the Mechanical Properties of Braided Vascular Stents. Bio-MedicalMaterials and Engineering. 2018;29 (1): 81–94. DOI 10.3233/BME-171714
(2)Cui X, Ren Q,Li G, Li Z, Qiao A(*). Influence ofthe Realistic Artery Geometry Parameters on a Coronary Stent Fatigue Life. InternationalJournal of Computational Methods, https://doi.org/10.1142/ S02**069
(3)Fu W, Qiao A(*). PressureIncrease after Stent Intervention Treatment for an Aneurysm Accompanied by aStenosis. International Journal of Computational Methods, https://doi.org/10.1142/S02**100
(4)Qiao A(*),Song X, Peng K, Du G, Li G, ChenZ. Validity of CAVI measurements for diagnosing hypertension in middle-aged andelderly patients and correlations of these measurements with relevant factors. Technologyand Health Care. 2017; 25 (S): S125–S134.
(5)Fu W, ChengG, Yan R, Qiao A(*). Numerical Investigations ofthe Flexibility of Intravascular Braided Stent. Journal of Mechanics inMedicine & Biology, 2017; 17(4): **.
(6)Han Y, Yang Q, Yang Z, Xia J, Su T, Jin L(*),Qiao A(*), Yu J. Computational fluid dynamics simulation of hemodynamic alterations in sigmoidsinus diverticulum and ipsilateral upstream sinus stenosis after stentimplantation in patients with pulsatile tinnitus. World Neurosurg. 2017 Jul 8.pii: S1878-8750(17)31076-8. doi: 10.1016/j.wneu.2017.06.168.
(7)Li H, Wei Y, Wang X, Liu T, Gu J, Li Z, Wang M,Zhao D, Qiao A, Liu Y, Zhu B.Multi-objective Optimizations of Biodegradable Polymer Stent Structure andStent Micro-injection Molding Process. Polymers. 2017, 9, 20;doi:10.3390/polym**
(8)Ma Y, Liu H, Hou Y, Qiao A, Hou Y, Yang Q, Guo Q. Instantaneous Wave-Free Ratio Derivedfrom Coronary Computed Tomography Angiography in Evaluation of Ischemia-CausingCoronary Stenosis: Feasibility and Initial Clinical Research. Medicine. 2017; 96(4):e5979.doi: 10.1097/ MD.5979
(9)Li H, Liu T, Wang M, Zhao D, Qiao A, Wang X, Gu J, Li Z, Zhu B. Design optimization of stent and its dilatation balloonusing kriging surrogate model. BioMedical Engineering Online, 2017; 16(1). DOI:10.1186/s12938-016-0307-6
(10)Song X, Li G, Qiao A (*), Chen Z. Association of Simultaneously MeasuredFour-limb Blood Pressures with Cardiovascular Function: a Cross-sectional Study.BioMedical Engineering OnLine. 2016, 15(Suppl 2):147, DOI 10.1186/s12938-016-0266-y
(11)Gu Z, Pan Y, Qiao A (*), Hu X, Dong N, Li X, Liu Y,Shang D. Numerical simulation of closure performance for neo-aortic valve forarterial switch operation. BioMedical Engineering OnLine. 2016 , 15(Suppl 2):150, DOI: 10.1186/s12938-016-0264-0
(12)Ren X, Fu Y, Qiao A (*). Influence of bifurcation diameter and angle on thevertebral artery origin stenosis: a simulation study of hemodynamics. Journalof Mechanics in Medicine and Biology. 2016; 16(6): ** (1-18).
(13)Qiao A(*), Dai X, Niu J and Jiao J. Hemodynamics in stented vertebralartery ostial stenosis based on computational fluid dynamics simulations. ComputerMethods in Biomechanics and Biomedical Engineering. 2015; DIO: 10.1080/**.2015.**
(14)BergP, RoloffC, ……, QiaoA, et al. The Computational Fluid Dynamics Rupture Challenge 2013–Phase II:Variability of Hemodynamic Simulations in Two Intracranial Aneurysms. Journalof Biomechanical Engineering. 2015;137(12),121008 (1-13) DOI:10.1115/1.**.
(15)Morsi Y, Hellevik L, Qiao A, Vayalappil M C, Tu J and Yang W. Cardiovascularhaemodynamics: Advancement of numerical and experimental diagnostic tools. Advancesin Mechanical Engineering.1–3, 2015. DOI: 10.1177/**81243
(16)Lu J, Duan W, Qiao A(*). Finite element analysis of mechanics of neovessels withintraplaque hemorrhage in carotid atherosclerosis. BioMedical EngineeringOnLine, 2015, 14(Suppl 1):S3 (1-11). doi:10.1186/1475-925X-14-S1-S3
(17)Fu Y, Qiao A(*),Jin L(*), The influence of hemodynamics onthe ulceration plaques of carotid artery stenosis. J. Mech. Med. Biol. 2015;15(1):**-1~14. DOI: 10.1142/S02**086
(18)Qiao A(*), Pan Y, Dong N. Fluid-Structure Interaction Simulation of Aortic Valve Closurewith Various Sinotubular Junction and Sinus Diameters. Annuals of BiomedicalEngineering. 2015; 43(6): 1363-1369. DOI: 10.1007/s10439-014-1120-7
(19)Cito S, Geers AJ, ArroyoMP, Palero VR, Pallarés J, Vernet A, Blasco J, Román L. San , Fu W , Qiao A, Janiga G, Miura Y, Ohta M, MendinaM, and Usera G. Accuracy and Reproducibility of Patient-Specific HemodynamicsModels of Stented Intracranial Aneurysms: Report on the Virtual IntracranialStenting Challenge 2011. Annals of Biomedical Engineering. 2015; 43(1): 154-167
(20)Qiao A(*), Pan Y, Dong N. Modeling study of aorticroot for Ross procedure: a structural finite element analysis. Journal ofHeart Valve Disease. 2014;23(6):683-687
(21)Qiao A (*), Yin W, Chu B. Numerical simulation of fluid–structureinteraction in bypassed DeBakey III aortic dissection. Computer Methods inBiomechanics and Biomedical Engineering. 2015; 18(11):1173-1180, DOI:10.1080/**.2014.881806
(22)Qiao A(*), Han H, Ohta M, and Qian Y. Computational Simulations in theCardiovascular System. The Scientific World Journal. Volume. 2014, http://dx.doi.org/10.1155/2014/421061
(23)Li Y, Anzai H, Nakayama T, Shimizu Y, Miura Y, Qiao A(*), Ohta M.Simulation of hemodynamics in artery with aneurysm and stenosis with differentgeometric configuration. Journal of Biomechanical Science and Engineering. 2014;9(1):13-0123(1-11)DOI: 10.1299/jbse.2014jbse0003
(24)Qiao A(*), Zhang Z. Numerical simulation of vertebral artery stenosis treatedwith different stents. J Biomech Eng. 2014; 136(4):041007-041007-9. DIO:10.1115/1.**
(25)Qiao A(*), Zeng K. Numericalsimulation of hemodynamics in intracranial saccular aneurysm treated with anovel stent. Neurological Research, 2013; 35(7): 701-708.
(26)Niu J, Qiao A(*), Jiao L.Hemodynamic analysis of stent expansion ratio for the vertebral artery ostium stenosisintervention. Journal of Mechanics in Medicine and Biology.2013;13(4):**~1-11.
(27)Steinman DA. (*), …, Qiao A,et al. Variability of CFD Solutions for Pressure and Flow in a Giant Aneurysm:The SBC2012 CFD Challenge. Journal of Biomechanical Engineering, 2013; 135(2):021015,1-13.
(28)Qiao A(*), Nan Q, Liu Y,Chang Y. Can interventional ablation be applied to the treatment of arterialaneurysm? Med Hypotheses, 2013;80 (4):373-375.
(29)Fu W, Qiao A(*). Fluid structure interaction ofpatient specific internal carotid aneurysms: a comparison with solid stressmodels. 6th World Congress on Biomechanics. Singapore, 1 - 6 August 2010
(30)Fu W, GuZ, Meng X, Chu B, QiaoA(*).Numerical simulationof hemodynamics in stented internal carotid aneurysm based on patient-specific model. Journal of Biomechanics. 2010;43(7):1337-1342
(31)Sui Y,Ma B, Chu B, QiaoA(*). Optimization of Anastomotic Configuration in CABG Surgery. CommunNumer Meth Engng. 2009; 25(11):1097–1106.
(32)Qiao A,Liu Y. Medical application oriented blood flow simulation. ClinicalBiomechanics, 2008; 23(SUPLL.1): S130-S136
(33)Qiao A,Liu Y. Numerical study of hemodynamics comparison between small and largefemoral bypass grafts. Commun Numer Meth Engng. 2008; 24(11):1067-1078.
(34)Qiao A,Gu Z, Meng X. Simulation of hemodynamics in bypassed aortic dissection. 2ndInternational Conference on Bioinformatics and Biomedical Engineering, iCBBE2008, 2008, p 1851-1854
(35)Qiao A,Ma Z, Fu P, Zhang H, Guan J. Research and development of print qualityinspection system of biochips. 2nd International Conference on Bioinformaticsand Biomedical Engineering, iCBBE 2008, 2008, p 1644-1647
(36)Qiao A, Matsuzawa T.Hemodynamic simulation in a novel design for femoral bypass grafts.Biorheology. 2007;44(2):103-124
(37)Qiao A, Liu Y, Guo Z. Wallshear stresses in small and large 2-way bypass grafts. Medical Engineering& Physics, 2006; 28(3): 251-258
(38)Qiao A, Liu Y. Influence of graft-host diameter ratioon the hemodynamics of CABG. Bio-medical Materials and Engineering. 2006;16(3): 189-201
(39)Qiao A, Liu Y, Li S, Zhao H. Numerical simulation of physiological bloodflow in 2-way coronary artery bypass grafts. Journal of Biological Physics,2005; 31(2): 161-182
(40)Qiao AK, Guo XL, Wu SG, Zeng YJ, Xu XH. Numerical study of nonlinearpulsatile flow in S-shaped curved arteries. Medical Engineering & Physics,2004; 26: 545-552
(41)Qiao AK, Zeng YJ, XuXH. Numerical simulations of stenosed femoral artery with symmetric 2-waybypass graft. Bio-Medical Materials and Engineering, 2004; 14(2), 167-174
主要论著：
(1)乔爱科主编，《机械CAD软件开发实用技术教程》，机械工业出版社，2008年7月出版。
(2)刘莹、吴宗泽主编，乔爱科参编。《机械设计教程》，机械工业出版社，2008年7月第二版。国家教育部普通高等教育“十一五”国家级规划教材。
(3)万小利、高志主编，乔爱科参编。《计算机辅助机械设计》，机械工业出版社，2003年3月出版。
主要发明专利：
(1)乔爱科，吴萍。基于脉搏波的血液粘度无创检测方法。1.X
(2)乔爱科，顾兆勇，贯建春，孟宪龙，张宏斌。一种血管内裸支架。0.1
(3)乔爱科，潘友联。一种充液型笼球式主动脉瓣支架系统。4.8
(4)乔爱科，潘友联。用于主动脉瓣叶游离缘悬浮手术的瓣叶成形器械。6.0
(5)乔爱科，卢金秋。一种不均匀厚度的双刀片切割球囊。0.8
(6)乔爱科，潘友联。一种聚合物人工主动脉瓣膜。6.X
(7)乔爱科，刘有军，任庆帅。沿真实牙弓轨迹扫描的数字化牙科曲面断层全景X光机。.2
(8)乔爱科，王俊杰，葛长森。一种放射性粒子介入治疗肿瘤的手术机器人系统及操作方法。2.4
(9)乔爱科，崔新阳，任庆帅。一种用于放射性粒子支架内装配的装置及装配方法。7.1
(10)乔爱科，崔新阳，彭坤，任庆帅。带环向支撑条的血管支架。5.0
主要软件著作权：
(1)乔爱科，陈为彩，顾兆勇，孟宪龙，张宏斌。血流动力学有限元后处理软件，2008SRBJ1425
(2)司慧琳，丁金立，柴霖娟，张宏斌，乔爱科。ANSYS结果后处理软件。2010SRBJ2324
(3)乔爱科，杜国伟。人体脉搏波信号和血压数值采集的实时监测系统的软件。2014SR116216
(4)乔爱科，杜国伟，宋晓瑞，彭坤，李高阳。人体四肢血压脉搏的实时监测系统。2015SR089203
获奖情况：
(1)1998年9月，北京工业大学优秀青年骨干教师称号。
(2)1999年12月，国家机械局科技进步奖三等奖(第4成员, 获奖项目“矿用汽车CAD系统”，**)。
(3)2004年12月，北京市科学技术奖二等奖(第2成员，获奖项目“生物力学对器官和组织研究”，2004基-2-006)。
研究兴趣：
生物医学工程，CAD/CAE/CFD，计算机软件应用与开发。专长：心脑血管疾病的血流动力学数值模拟和医疗器械研发。
社会兼职：
北京生物医学工程学会生物力学专业委员会委员；中国生物医学工程学会生物力学分会高级会员；中国生物物理学会生物力学和生物流变学专业委员会高级会员；美国机械工程师学会(ASME)会员；美国生物医学工程学会(BMES)会员；世界华人生物医学工程协会(WACBE)会员。《医用生物力学》、《北京生物医学工程》、《生物物理学》、《北京工业大学学报》、《International Scholarly ResearchNotices》、《Advances inBiomechanics & Applications》、《SM Journal of Engineering Sciences》、《Archives of Clinical Hypertension》、《Insights in Biomedical Engineering》、《International Journal of Biomedical Engineering and Clinical Science》、《SRL Biomedical Engineering & BiomedicalScience》、《SRLClinical & Experimental Hypertension》、《Journal_of_Integrated_Technology》、《Heighpubs Journal of Nursing Care and Practice》、《Chronicle Journal of Surgery》、《Trends in Hypertension andNephrology》、《GSL Journalof Cardiovascular Diseases》、《Global Scientific Journal of Nephrology & Hypertension》、《CurrentUpdates in Cardiovascular Diseases & Treatment》等国内外学术期刊编委。70余份国际、国内学术期刊的审稿人。国家自然科学基金、科技部国家重点研发计划、教育部留学回国人员科研启动基金等项目评审专家。
国际交流：
与日本、美国、澳大利亚、爱尔兰等国的高校有多年的学术交流与合作经验。
招生学科和方向：0831生物医学工程 - 02心血管医学工程及医疗装备，招生学术型硕士和工学博士；085230 生物医学工程（专业学位）- 02心血管医学工程及医疗装备，招生专业型硕士。
通信地址：北京市朝阳区平乐园100号，北京工业大学生命科学与生物工程学院生物医学工程系，100124
Email：qak@bjut.edu.cn;AQiao@hotmail.com