删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

椭圆截面弹体侵彻混凝土阻力特性研究

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
椭圆截面弹体侵彻混凝土阻力特性研究
Study on the Resistance Characteristics of Elliptical Cross-Section Projectile Penetrating Concrete
投稿时间:2018-08-28
DOI:10.15918/j.tbit1001-0645.2019.02.005
中文关键词:异构型弹体椭圆截面混凝土侵彻阻力特性
English Keywords:heterogeneous projectileelliptical cross sectionconcrete penetrationresistance characteristics
基金项目:国家自然科学基金资助项目(11390362,11572048);装备预研领域基金资助项目(61406570101)
作者单位E-mail
刘子豪北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
武海军北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081wuhj@bit.edu.cn
高旭东南京理工大学 机械工程学院, 江苏, 南京 210094
皮爱国北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
黄风雷北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
摘要点击次数:722
全文下载次数:320
中文摘要:
为研究椭圆截面异构型弹体侵彻混凝土过程中的弹体头部受力特性,开展圆形及等截面积不同长短轴之比的椭圆截面弹体侵彻混凝土过程数值模拟计算,对不同弹体侵彻过程中头部表面所受法向应力与法向速度关系进行了分析.获得了不同长短轴之比情况下的椭圆截面弹体头部表面所受法向应力与法向侵彻速度、单元所在位置角度之间的关系表达式,并进一步得到了椭圆截面弹体侵深计算公式.结果表明:与等截面积的圆形截面弹体相比,在相同法向速度情况下,椭圆截面弹体表面所受法向应力大小随着头部表面单元位置到椭圆中心距离的增大而增大;在侵彻速度相同时,弹体侵深随着截面长短轴之比的增大而增大.
English Summary:
In order to study the stress characteristics of projectile head during the process of penetrating concrete with elliptical cross-section heterogeneous projectile, numerical simulation of circular and equal cross-sectional area of the elliptical cross-section projectile penetrating concrete process was carried out, and the relationship between the normal stress and the normal velocity on the head surface during the penetration of different projectiles was analyzed. The relationship between the normal stress and the normal penetration velocity of the elliptical cross-section projectile's head surface at different ratios of the major axis to the minor axis and the position of the element was obtained, and the elliptic cross-section body penetration calculation formula was also obtained. The results show that compared with the same cross-sectional area of the circular cross-section projectile, and at the same normal velocity, the normal stress of elliptical cross-section projectile surface increases with the distance from the element of the head to the center of the ellipse. At the same penetration velocity, the penetration depth of the projectile increases with the ratio of the major axis to the minor axis of the cross section.
查看全文查看/发表评论下载PDF阅读器
相关话题/北京理工大学 北京 实验室 技术 科学