二维码（扫一下试试看！） | | 铝合金PLC效应与声发射特性的实验研究 | | Experimental Study on PLC Effect and Acoustic Emission Characteristics of Aluminum Alloy | | 投稿时间：2018-12-10 | | DOI：10.15918/j.tbit1001-0645.2019.10.002 | | 中文关键词:6063铝合金退火PLC效应声发射波形 | | English Keywords:6063 aluminum alloyannealingPLC effectacoustic emissionwaveform | | 基金项目:国家自然科学基金资助项目（11572049） | | | 摘要点击次数:692 | | 全文下载次数:352 | | 中文摘要: | | 考虑退火温度和应变率对6063铝合金力学性能的影响，采用材料试验机和声发射测试系统对铝合金PLC效应和声发射特性开展实验研究，获得了不同应变率下材料的应力-应变曲线和不同退火温度下声发射参数的变化规律.结果表明，2×10-3，2×10-4，2×10-5s-1应变率加载时，6063铝合金的应力应变曲线表现出明显的PLC现象，降低加载应变率，PLC现象增强，并出现了从A型到C型的转化；加载应变率为2×10-4s-1时，PLC效应的临界应变随退火温度的升高而降低；由于细观结构上可动位错密度的增加，屈服阶段试件中产生的声发射振铃计数急剧增加，达到峰值；进入到塑性强化阶段，声发射活动减弱；弹性变形阶段和塑性强化阶段产生突发型信号，而屈服阶段为连续型信号，与试件的均匀变形以及剪切变形带的形成与传播相关. | | English Summary: | | Considering the influence of annealing temperature and strain rate on the mechanical properties of 6063 aluminum alloy, the PLC effect and acoustic emission characteristics of aluminum alloy were experimentally studied by material testing machine and acoustic emission testing system. The stress-strain curves of materials under different strain rates and the variation of acoustic emission parameters at different annealing temperatures were obtained. The results show that the stress-strain curves of 6063 aluminum alloy exhibit obvious PLC phenomenon when loaded at strain rates of 2×10-3, 2×10-4 and 2×10-5 s-1. When the strain rate is reduced, the PLC phenomenon is enhanced, and the conversion from type A to type C occurs. The critical strain of the PLC effect decreases with the increasing annealing temperature at 2×10-4 s-1. With the increase of the dynamic dislocation density on the mesostructure, the acoustic emission ringing count increases sharply and reaches the peak value in the yield stage. The acoustic emission activity is weakened in the plastic hardening stage. The burst type signal is generated in the elastic stage and the plastic strengthening stage, while the continuous signal is generated in the yield stage, which is related to the uniform deformation of the specimen and the formation and propagation of the shear deformation zone. | | 查看全文查看/发表评论下载PDF阅读器 | |
郭磊,邢立华,袁倩,葛方俊.干式生化分析仪机载环境力学适应性技术研究[J].北京理工大学学报（自然科学版）,2019,39(10):1045~1050.GUOLei,XINGLi-hua,YUANQian,GEFang-jun.ResearchonMechanicalEnvironmentAdapt ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21李维浩,姚世明,李蔚清,苏智勇.面向AR沙盘异地协同标绘的动作重构技术[J].北京理工大学学报（自然科学版）,2019,39(12):1298~1303,1320.LIWei-hao,YAOShi-ming,LIWei-qing,SUZhi-yong.AMotionReconstructionTec ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21.北京理工大学学报2019年总目次（第39卷）[J].北京理工大学学报（自然科学版）,2019,39(12):1321~1338..[J].TransactionsofBeijingInstituteofTechnology,2019,39(12):1321-1338.二维码（扫一下试试看！）北京理 ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21张志广,李宁,包云肽,张阳天.基于小波变换的离子迁移谱信号处理技术[J].北京理工大学学报（自然科学版）,2019,39(S1):164~167.ZHANGZhi-Guang,LINing,BAOYun-Tai,ZHANGYang-Tian.SignalProcessingTechnologyfor ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21汪怡平,郭承奇,王涛,黎帅,姚云龙.基于自由变形技术的Ahmed模型气动减阻优化[J].北京理工大学学报（自然科学版）,2018,38(3):221~228.WANGYi-ping,GUOCheng-qi,WANGTao,LIShuai,YAOYun-long.AerodynamicDragRedu ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21孙崔源,薛里,孟海利,付天杰,康永全.几种典型爆破振动控制技术的试验研究[J].北京理工大学学报（自然科学版）,2018,38(4):359~363,370.SUNCui-yuan,XUELi,MENGHai-li,FUTian-jie,KANGYong-quan.ExperimentalResea ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21王登峰,蔡珂芳,张帅,马明辉.基于激光拼焊技术的汽车B柱结构优化设计[J].北京理工大学学报（自然科学版）,2018,38(7):691~697,708.WANGDeng-feng,CAIKe-fang,ZHANGShuai,MAMing-hui.StructureDesignofAutomotiv ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21范世鹏,祁琪,路坤锋,吴广,李伶.基于改进人工势场法的巡航导弹自主避障技术[J].北京理工大学学报（自然科学版）,2018,38(8):828~834.FANShi-peng,QIQi,LUKun-feng,WUGuang,LILing.AutonomousCollisionAvoidanceTec ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21邵楠,步志超,李柏,陈玉宝.清远连州CINRAD/SA-D型业务试验双偏振天气雷达技术评估[J].北京理工大学学报（自然科学版）,2018,38(9):953~958.SHAONan,BUZhi-chao,LIBai,CHENYu-bao.TheTechnologyEvaluationofS-Ban ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21邱忠超,张卫民,高玄怡,张瑞蕾.基于PSO-LSSVM的疲劳裂纹漏磁定量识别技术[J].北京理工大学学报（自然科学版）,2018,38(11):1101~1104,1140.QIUZhong-chao,ZHANGWei-min,GAOXuan-yi,ZHANGRui-lei.Quantitative ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21
| |
