二维码（扫一下试试看！） | | 基于J积分分析固体火箭发动机药柱界面裂纹的稳定性 | | Stability Analysis of the Interfacial Debonded Crack in Solid Rocket Motor Grain with the J Integral | | 投稿时间：2014-06-06 | | DOI：10.15918/j.tbit1001-0645.2018.02.003 | | 中文关键词:固体火箭发动机有限元方法奇异界面裂纹单元3维J积分 | | English Keywords:solid rocket motorfinite element methodsingular interfacial crack element3-D J-integral | | 基金项目:国家部委预研支撑项目（40403）. | | | 摘要点击次数:718 | | 全文下载次数:406 | | 中文摘要: | | 为探讨某型固体火箭发动机药柱前端壳体/绝热层、绝热层/包覆层、包覆层/推进剂界面裂纹在点火发射时的稳定性，采用3维黏弹性有限元方法，通过在3维J积分柱面内脱黏裂纹尖端上构建奇异界面裂纹单元的方法提高计算精度，分别计算随着界面裂纹沿界面扩展不同深度的J积分，根据J积分随脱黏裂纹深度与位置的变化规律探讨脱黏裂纹的稳定性.结果表明，发动机点火发射时，对应发动机前翼槽结构的各界面裂纹J积分值为全局最大，并且各界面裂纹的J积分值随着脱黏深度的增加呈单调增长趋势，即当界面裂纹脱黏深度到达一定的深度后将失稳扩展. | | English Summary: | | In order to investigate the stability of the case/insulation,insulation/cladding,cladding/propellant interfacial cracks in the solid rocket motor (SRM) grain when it was lunched,the three-dimension viscoelastic finite element models of the SRM with interfacial cracks were established.The singular interfacial crack elements were included in the 3-D J-integral loop surface to improve the calculation precision.The three-dimension singular interfacial crack elements at the tips of debonded cracks were established to simulate the crack propagation along the bonded interface.Along the interfacial crack propagation,the J-integral of the interfacial crack tips variation with the debonded length and position were calculated to prejudge its stability.The results show that the maximal J-integral value of the interfacial cracks is located in the position where corresponds to the fore slot of SRM grain.And the J-integral value of the interfacial cracks is monotony increasing with the debonded length.Then the interfacial cracks should be expanded instability at a certain debonded depth. | | 查看全文查看/发表评论下载PDF阅读器 | |
汪怡平,郭承奇,王涛,黎帅,姚云龙.基于自由变形技术的Ahmed模型气动减阻优化[J].北京理工大学学报（自然科学版）,2018,38(3):221~228.WANGYi-ping,GUOCheng-qi,WANGTao,LIShuai,YAOYun-long.AerodynamicDragRedu ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21孙崔源,薛里,孟海利,付天杰,康永全.几种典型爆破振动控制技术的试验研究[J].北京理工大学学报（自然科学版）,2018,38(4):359~363,370.SUNCui-yuan,XUELi,MENGHai-li,FUTian-jie,KANGYong-quan.ExperimentalResea ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21王登峰,蔡珂芳,张帅,马明辉.基于激光拼焊技术的汽车B柱结构优化设计[J].北京理工大学学报（自然科学版）,2018,38(7):691~697,708.WANGDeng-feng,CAIKe-fang,ZHANGShuai,MAMing-hui.StructureDesignofAutomotiv ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21范世鹏,祁琪,路坤锋,吴广,李伶.基于改进人工势场法的巡航导弹自主避障技术[J].北京理工大学学报（自然科学版）,2018,38(8):828~834.FANShi-peng,QIQi,LUKun-feng,WUGuang,LILing.AutonomousCollisionAvoidanceTec ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21邵楠,步志超,李柏,陈玉宝.清远连州CINRAD/SA-D型业务试验双偏振天气雷达技术评估[J].北京理工大学学报（自然科学版）,2018,38(9):953~958.SHAONan,BUZhi-chao,LIBai,CHENYu-bao.TheTechnologyEvaluationofS-Ban ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21邱忠超,张卫民,高玄怡,张瑞蕾.基于PSO-LSSVM的疲劳裂纹漏磁定量识别技术[J].北京理工大学学报（自然科学版）,2018,38(11):1101~1104,1140.QIUZhong-chao,ZHANGWei-min,GAOXuan-yi,ZHANGRui-lei.Quantitative ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21.北京理工大学学报2018年总目次（第38卷）[J].北京理工大学学报（自然科学版）,2018,38(12):1321~1338..[J].TransactionsofBeijingInstituteofTechnology,2018,38(12):1321-1338.二维码（扫一下试试看！）北京理 ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21刘静,侯宇,苏婷慧,张庆,邵毅敏.基于模块化设计的特种车辆减振降噪技术研究[J].北京理工大学学报（自然科学版）,2018,38(S1):38~43.LIUJing,HOUYu,SUTing-hui,ZHANGQing,SHAOYi-min.StudyonVibrationControlandNoi ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21黄文彬,丁晓喜,杜明刚,邵毅敏.机械传动系统的智能感知技术[J].北京理工大学学报（自然科学版）,2018,38(S1):33~37.HUANGWen-bin,DINGXiao-xi,DUMing-gang,SHAOYi-min.IntelligentSensingTechnologyforMech ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21刘勇.轮毂电机驱动多轴越野车辆总体技术探讨[J].北京理工大学学报（自然科学版）,2018,38(S1):55~58.LIUYong.TheStudyonGeneralTechnologyofIn-WheelMotorDriveMultiaxisOff-RoadVehicle[J].Transact ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21
| |
