删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

一种7R冗余机械臂的容错空间优化

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
一种7R冗余机械臂的容错空间优化
Optimizationof Fault-Tolerant Workspace for 7R Redundant Manipulator
投稿时间:2016-06-06
DOI:10.15918/j.tbit1001-0645.2017.09.009
中文关键词:冗余机械臂容错空间转换比锁定角范围
English Keywords:redundant manipulatorfault-tolerant workspaceconversion ratiolocking range
基金项目:国家部委预研项目(870102056)
作者单位E-mail
付铁北京理工大学 机械与车辆学院, 北京 100081
朱朝辉北京理工大学 机械与车辆学院, 北京 100081julian_nash@126.com
丁洪生北京理工大学 机械与车辆学院, 北京 100081
张庆东北京理工大学 机械与车辆学院, 北京 100081
摘要点击次数:450
全文下载次数:742
中文摘要:
以一种双偏置7R冗余机械臂为研究对象,探讨其单关节容错空间的优化问题.针对容错空间体积的变化规律,考虑容错空间与工作空间的关系,引入转换比的概念,通过选取合适的关节锁定角范围对机械臂的容错空间进行了优化.研究结果表明,在两种不同的锁定角范围取值方式下,随着锁定角的增大,转换比均呈现先上升后下降的规律.同时,最高转换比对应的锁定角亦得到确定.
English Summary:
Optimization of fault-tolerant workspace for a 7R redundant manipulator in the condition of single-joint locking was studied systematically. Firstly, the concept of conversion ratio was introduced based on the change rule of the fault-tolerant workspace volume and the relationship consideration between fault-tolerant workspace and locking workspace. And then the redundant manipulator's fault-tolerant workspace was optimized by determining suitable joint's locking range. The study results show conversion ratio increases initially and decreases afterwards as the locking angle increases by two kinds of value method. Meanwhile, the locking angle of highest conversion ratio is also determined.
查看全文查看/发表评论下载PDF阅读器
相关话题/机械 空间 北京 车辆 北京理工大学