删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

非公路车辆簧载质量实时估计

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
非公路车辆簧载质量实时估计
Real-Time Sprung Mass Estimation for Off-Road Vehicles
投稿时间:2016-05-12
DOI:10.15918/j.tbit1001-0645.2017.12.013
中文关键词:簧载质量估计|递推最小二乘法|油气弹簧|整车模型
English Keywords:sprung mass estimation|recursive least squares|hydro-pneumatic spring|full vehicle model
基金项目:
作者单位E-mail
郑戍华北京理工大学 自动化学院, 北京 100081
曹鑫磊北京理工大学 自动化学院, 北京 100081
王向周北京理工大学 自动化学院, 北京 100081wangxiangzhou@263.net
摘要点击次数:748
全文下载次数:1205
中文摘要:
针对非公路车辆簧载质量估计问题,提出了一种采用油气弹簧气压测量与车体在线姿态测量相结合进行实时簧载质量估计的方法.建立了基于单筒式油气弹簧的整车7自由度振动模型,利用带遗忘因子的递推最小二乘估计方法对簧载质量进行估计,并以D级道路作为仿真激励进行了仿真实验.研究了递推最小二乘估计中遗忘因子、滤波器参数及车速等因素对质量估计性能的影响,结果表明所提出的质量估计方法具有良好的准确性和实时性.
English Summary:
In order to estimate the sprung mass for the off-road vehicle in real time, an estimation method was proposed based on measuring the air pressure of the hydro-pneumatic air chamber and vehicle attitude. Based on the established seven-degree of freedom nonlinear full vehicle model with single tube hydro-pneumatic spring, the simulation was carried out by using the recursive least square estimation method with forgetting factor on the D-level road excitation. The influence of vehicle speed, filtering parameter and recursive least squares forgetting factor on the estimation performance was investigated. And the simulation results show that, the proposed method can provide the estimation with high accuracy and short response time.
查看全文查看/发表评论下载PDF阅读器
相关话题/质量 北京理工大学 北京 自动化 车辆