彭良明
单位：近代力学系
地址：安徽省合肥市中国科技大学西校区
邮编：230026
电话：+86-
个人主页： http://mech.ustc.edu.cn/szdw/szml/js/201007/t**_23920.html
实验室介绍：


个人简历 Personal resume


彭良明：男, 1970年8月生。中国科学技术大学近代力学系教授、博士生导师。1993年获大连理工大学材料科学与工程学士学位，1998年获大连理工大学结构力学博士学位。1998. 10-2002.10先后在日本国立长冈技术科学大学、日本精细陶瓷研究中心和韩国浦项科技大学从事博士后和访问研究，2002年底年被聘为中国科学技术大学近代力学系副教授，2007年底晋升为教授。1998年获日本文部省奖学金，2000年获日本科学技术厅研究基金 (STA Fellow), 2007年入选教育部 “新世纪优秀人才支持计划”，获中国科技大学＂王宽诚育才奖＂一等奖。 曾负责和参加国家自然科学基金项目各1项; 承担教育部 “新世纪优秀人才支持计划”,总装XXX工程基础理论XXX项目探索研究等项目,与多家研究生产单位建立了合作研究关系。目前在研国家自然科学基金1项，航天科技集团公司五院西安分院委托项目在研2项。迄今在国际学术期刊发表SCI收录论文70余篇，论著被他人引用700余次。本人不定期被多家国内外核心权威期刊如Composites Science and Technology,Journal of the American Ceramic Society, Journal of Materials Research,Intermetallics,Philosophical Magazine,Materials Research Bulletin,Surface and Coatings Technology,Materials Science and Engineering A,Journal of Composite Materials,Journal of Materials Science,Powder Metallurgy, Eurasian Chemico-Technological Journal,Journal of Materials Science & Technology, Current Applied Physics等杂志主编邀请作为审稿人(Peer-reviewer)。目前的主要研究方向:(1) 先进结构材料(新型多元陶瓷及其复合材料、C/C复合材料、超高温合金、非晶合金及其复合材料)的优化设计、制备及其力学行为(2) 新型热电转换材料的研制及其热电传输特性研究(3) 多元高熵合金设计、制备、微结构调控及其变形行为(4) 高温形状记忆合金制备、微结构调控及其功能特性实验室设备条件:(1) 拥有比较完备的材料制备设备包括制粉、球磨、成型和真空热压烧结炉、真空电磁感应悬浮熔炼炉等(2) 多功能高温试验机(3) 工程与材料测试中心拥有完备的材料性能测试与微结构表征设备包括MTS、环境扫描电镜、透射与高分辨电镜、纳米压痕仪等


研究方向 Research direction


1、材料成型与微结构控制
2、新型纳米热电转换材料热电传输特性
3、高熵合金与高温形状记忆合金



招生信息 Enrollment information


要求:(1)本科专业-固体力学/金属材料/无机非金属材料/复合材料/材料加工工程; (2) 以硕博连读和直博生为主.


论文专著 The monograph Researcher ID


1)Mechanical properties of ceramic-metal composites by pressure infiltration of metal into porous ceramics - Materials Science and Engineering A - 2004 -
2)Processing and mechanical behavior of laminated titanium-titanium tri-aluminide (Ti-Al3Ti) composites - Materials Science and Engineering A - 2005 -
3)Synthesis and microstructure characterization of Ti-Al3Ti metal-intermetallic laminate (MIL) composites - Scripta Materialia - 2005 -
4)High strength and high fracture toughness ceramic-iron aluminide (Fe3Al) composites - Materials Letters - 2006 -
5)Microstructure, and mechanical properties of in situ TiAl-based multiphase composites - Metallurgical and Materials Transactions A - 2006 -
6)Synthesis and microstructural characterization of aluminum borate whiskers - Ceramics International - 2006 -
7)Processing and mechanical properties of multiphase composites based on Mo-Si-Al-C system - Journal of Alloys and Compounds - 2006 -
8)Fabrication and mechanical properties of microalloyed and ceramic particulate reinforced NiAl-based alloys - Journal of Alloys and Compounds - 2007 -
9)Preparation and properties of ternary Ti3AlC2 and its composites from Ti-Al-C powder mixtures with ceramic particulates - Journal of the American Ceramic Society - 2007 -
10)Investigation of multi-phase intermetallic matrix composites (IMC) based on Al-Mo-Zr-Co system - Intermetallics - 2007 -
11)Multi-phase aluminide-based composites—fabrication, microstructure and properties - Composites Science and Technology - 2007 -
12)Fabrication and properties of Ti3AlC2 particulates reinforced copper composites - Scripta materialia - 2007 -
13)Microstructural and mechanical characterization of Nb-based in situ composites from Nb-Si-Ti ternary system - Acta materialia - 2007 -
14)Ultra-high temperature Mo-Si-B alloys—synthesis, microstructural and mechanical characterization - Materials Letters - 2008 -
15)Synthesis and mchanical properties of niobium aluminide-based composites - Materials Science and Engineering A - 2008 -
16)Tensile properties and high temperature creep behavior of micro-alloyed Ti-Ti3Al-Nb alloys by directional solidification - Materials Science and Engineering A - 2010 -
17)Microstructural and high temperature deformation characterization of Ti-45Al-3Nb-(Cr, Mn, Mo, Sc) alloy - Materials Science and Engineering A - 2010 -
18)ZrB2/SiC composite parts in oxyacetylenic torch tests: experimental and computational assessment of chemical, thermal and mechanical behavior - Materials Science and Engineering A - 2011 -
19)Properties of Ti3XC2 (X=Al, Si) with plasma sprayed ZrO2 thermal barrier coatings - Acta Metallurgica Sinica - 2011 -
20)Solvothermal synthesis and growth mechanism of Ag and Sb co-doped PbTe heterogeneous thermoelectric nanorods and nanocubes - Materials Chemistry and Physics - 2012 -
21)Effects of surface structure and Ag-Sb nanodots on electronic properties of PbTe (100) facets from first-principles calculations - Scripta materialia - 2012 -
22)Microstructural Characterization and Mechanical Properties of an Al0.5CoCrFeCuNi High-entropy Alloy in As-cast and Heat-treated/quenched Conditions - Materials Science and Engineering A - 2013 -
23)Effect of Annealing on Thermoelectric Properties of Eutectic PbTe-Sb2Te3 Composite with Self-assembled Lamellae Structure - Intermetallics - 2013 -
24)First Principles Investigation of Dual Substitutional Impurity-induced Electronic Structural Modulation of PbTe on Cationic and Anionic Sites - Acta Materialia - 2013 -
25)Hydrothermal Synthesis of ZrW2O8 Nanorods and its Application in Cu/ZrW2O8 Composites with Controllable Thermal Expansion Coefficients - Materials & Design - 2013 -
26)Microstructure and Strengthening Mechanism of a Thermomechanically Treated Mg-10Gd-3Y-1Sn-0.5Zr Alloy - Materials Science and Engineering A - 2013 -