姜庆伟 副教授 博士

Email: jqw6@163.com

云南省昆明市一二一大街文昌路68号昆明理工大学材料科学与工程学院



教育背景 (Education)

2008.09 - 2011.10 (博士)

东北大学材料物理与化学研究所攻读博士学位，博士导师为李晓武教授, 材料物理与化学专业

2006.09 - 2008.07

东北大学材料物理与化学研究所攻读硕士学位，博士导师为李晓武教授, 材料物理与化学专业



工作经历 (Work Experience)

2012.07 – 2014.08 云南昆钢钢制品有限公司 云南昆钢新型复合材料开发有限公司副总经理(挂职)

2013.08 – 至今 昆明理工大学，材料科学与工程学院，副教授（破格）

2011.11 – 至今 昆明理工大学，材料科学与工程学院，教师



在研项目(Research Projects)

1. (主持) 超细晶纯铝、铁、钛的宽温域变形稳定性研究 国家自然科学基金（青年科学基金项目） 2013-01-01~2015-12-31

2. (主持) 热处理对超细晶材料变形及损伤行为的影响 云南省科学技术厅 (人才引进) 2012-01-15~2014-12-15



代表性文章 (Selected Publications)

1. Jiang, Q. W., Li, X.W.，Chao，Y. S.: Effect of pre-annealing treatment on the compressive deformation and damage behavior of ultrafine-grained copper. Mater. Sci. Eng. A, 546 (2012) 59-67.

2. 姜庆伟，刘印，王尧，晁月盛，李小武，“超细晶铜在退火或高温变形条件下微观结构的不稳定性研究”，金属学报，45(7) (2009), 873-879.

3. Jiang, Q.W., Wang, Y., Wu, Y. and Li, X. W., Effect of ECAP on the High-Temperature Compressive Deformation Bebavior of LY12 Aluminum Alloys. Mater. Technol., 27 (1) (2012), 58-61.

4. Jiang, Q.W., Xiao, L. and Li, X.W., A Comparison of Temperature-Dependent Compressive Deformation Features of Ultrafine-Grained Ti and Cu Produced by ECAP. Mater. Sci. Forum, 682(2011), 41-45.

5. Li, X.W., Jiang, Q.W., Liu Y. and Wang, Y. Effect of Strain Rate on the High-Temperature Compressive Deformation Behavior of Ultrafine-Grained Copper. Inter. J. Mod. Phys. B, 23 (2009), No. 6-7, 1758-1763.

6. Li, X.W., Jiang, Q.W., Wu, Y., Wang, Y. and Umakoshi, Y. Stress-Amplitude-Dependent Deformation Characteristics and Microstructures of Cyclically Stressed Ultrafine-Grained Copper. Adv. Eng. Mater., 10(2008), 720-726.

7. Wang, Y., Jiang , Q. W. *, Wu, Y. and Li, X. W. Comparison of High-Temperature Compressive Deformation Characteristics of Differently Processed LY12 Aluminum Alloys. Mater. Sci, Forum, 667-669（2011）, 845-849.

8. Yu, Z.Y., Jiang, Q.W. and Li, X.W. Temperature-Dependent Plastic Deformation and Damage Behavior of Ultrafine-Grained Copper under Uniaxial Compression. Phys. Stat. Sol. (a), 205, No. 10(2008), 2417-2421.

9. 李小武，姜庆伟，刘印，“超细晶铜的高温循环变形及损伤行为”，粉末冶金材料科学与工程，14(1)(2009)，17-20.



学术会议

1. Li, X.W.^*（导师）, Jiang, Q.W., Liu, Y., Wang, Y., Wu, S.D., Yasuda, H.Y. and Umakoshi, Y. (2008): An Overview of Temperature-Dependent Plastic Deformation and Damage Behavior of Ultrafine-Grained Copper under Uniaxial Compression and Fatigue Loads. The 5^th International Conference on Advanced Materials and Processing (Invited Lecture, 大会分会特邀报告), (held Sept. 2-5, 2008, Harbin, P.R. China).

2. 李小武^*（导师），姜庆伟，刘印，(2007)“超细晶铜的高温循环形变及损伤行为”，第四届海内外中华青年材料科学技术研讨会暨第十一届全国青年材料科学技术研讨会(大会分会特邀报告)，中国重庆，2007年10月。

3. Jiang, Q.W., Xiao, L. and Li, X.W.^* （导师）(2009): A Comparison of Temperature-Dependent Compressive Deformation Features of Ultrafine-Grained Ti and Cu Produced by ECAP. 2009中国材料研讨会（L分会场：纳米金属材料与塑性变形），中国苏州，2009年10月14-17日。（出席会议并做口头报告)

4. 姜庆伟，王尧，李小武^*（导师），(2008)“超细晶铜的高周和低周疲劳行为的比较”，(第十四届全国疲劳与断裂学术会议，中国井冈山，2008年10月20-22日) 结构强度研究，10月增刊，p. 208-211. (该报告论文被本次大会评为优秀论文一等奖)



Ass. Prof. Dr. Qingwei Jiang

School of Materials Science and Engineering, Kunming University of Science and Technology, 650093 Kunming, China

Email: jqw6@163.com



Education

2008.09 - 2011.10 (Ph.D.)

Institute of Materials Physics and Chemistry, Northeastern University.

Ph.D. advisor: Professor Xiaowu Li

Majored in Materials Physics and Chemistry.



Work Experience

2012.08 – 2014.09, as a Deputy General Manager at Yunnan KISC (Kunming Iron & Steel Holding Co., Ltd.) Yunnan Kungang New Composite Materials Development Co., Ltd.

2013.08 – present, as an Ass. Prof. at College of Materials Science and Engineering, Kunming University of Science and Technology

2011.11 – present, as a teacher at College of Materials Science and Engineering, Kunming University of Science and Technology

2012.08 – 2014.09, as a Deputy General Manager at Yunnan KISC (Kunming Iron & Steel Holding Co., Ltd.) Yunnan Kungang New Composite Materials Development Co., Ltd.

2013.08 – present, as an Ass. Prof. at College of Materials Science and Engineering, Kunming University of Science and Technology

2011.11 – present, as a teacher at College of Materials Science and Engineering, Kunming University of Science and Technology