高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
研究方向: 新型材料力学性能；微电子封装可靠性；化工过程装备流场分析与模拟

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
研究方向: 新型材料力学性能；微电子封装可靠性；化工过程装备流场分析与模拟

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
讲授课程: 化工信息学

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
学术兼职: 　

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
学术成就: "金属材料的多轴低周疲劳寿命预测" 获2002年天津市自然科学三等奖（第3完成人）。
"多轴非比例载荷下金属材料低周疲劳研究"获2003年教育部自然科学二等奖（第7完成人）。

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
科研项目: 作为骨干, 参与1项国家基金重点项目和3项国家基金面上项目, 参与1 项863 课题；作为负责人, 主持1项国家基金面上项目, 1项天津市支撑重点基金项目, 2项天津市面上基础研究项目, 负责横向课题8项，参与横向课题多项。

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
论著专利: 近年发表的论文：
[1] Fan Li, Lilan Gao, Hong Gao*, Themechanical properties and modeling of creep behavior of UHMWPE/nano-HAcomposites, Journal of Materials Engineering and Performance, 2017.
[2]Gang Chen, Jiana Ren, Yun Cui, Hong Gao*,Xu Chen, Pseudoelastic and corrosion behaviors of Mg ZEK100 alloy under cyclicloading, Int. J Fatigue, 2017, 103:466-477. (SCI: FE1MR)
[3]HongGao , Yongkai Wang , Bo Song*, Wenguo Zhang, Resistance analysis andfatigue life of COG assemblies under thermal cycle aging, IEEE TransactionsonDeviceandMaterialsReliability.2017,17(2):463-471 (SCI: EX5OX)
[4] Hong Gao, Wenbo Ye, Zhe Zhang,Lilan Gao，Ratcheting behavior of ZEK100 magnesium alloy withvarious loading conditions and different immersing time, Journal of MaterialsResearch. 2017, 32(11):2143-2152. (SCI: EY1ZN)
[5]Li-Lan Gao, Chaolei Wei, ChunQiu Zhang, HongGao, Yang Nan, Xizheng Zhang, Quasi-static and ratcheting propertiesof trabecular bone under uniaxial and cyclic compression, Materials Science andEngineering C, 2017, 77:1050-1059.
[6] Fan Li , Wenguo Zhang , LilanGao, Hong Gao *, The coupled effects of salt-spraycorrosion, electrical current and mechanical load on the electrical and fatigueproperties of COG assembly, Microelectronics Reliability. 2016, 66:92-97. (SCI: EF7KR )
[7] Hong Gao , Meng Zhang ,Jian-Jun Xia , Bo Song* , Yong-Kai Wang , Time and surfactant types dependent model of foamsbased on the Herschel–Bulkley model , Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2016, 509:203-213. (SCI: DY9RE)
[8] Xin Yuan, Dunji Yu,Li-Lan Gao, Hong Gao*, Xu Chen, Effectof phosphate-buffered-solution corrosion on the ratcheting-fatigue behavior ofa duplex Mg-Li-Al alloy, Journal of Materials Engineering and Performance, 2016,25(5):1802-1810. (SCI: DK0BL)
[9]Hong Gao ,Meng Zhang , Jin Zhao, Lilan Gao*, Mingshuo Li, In vitro and in vivodegradationand mechanical properties ofZEK100 magnesium alloy coated with alginate, chitosan and mechano-growth factor , Materials Science and Engineering C, 2016,63: 450-461. ( SCI: DK4UW)
[10] HongGao , Wenguo Zhang , Zhe Zhang, Lilan Gao,Gang Chen, Study onfatigue life and electrical property of COG assembly underthermal-electric-mechanical coupled loads, Microelectronics Reliability.2016, 56:148-154. (SCI: DC8DN)
[11]Li-Lan Gao, Xiao-Yi Qin, Chun-Qiu Zhang, Hong Gao, Hong-Yu Ge , Xi-Zheng Zhang ,Ratcheting behavior of articularcartilage under cyclic unconfined compression , Materials Science andEngineering C, 2015,57:371-377.

[12]Lilan Gao,Hong Gao, Xu Chen*, Recent advances in mechanical properties of anisotropic conductive adhesive film for microelectronic packaging, Soldering & Surface Mount Technology. 2015, 27(4): 164-177.
[13] Hong Gao, Jianhua Ma, Lilan Gao, Dunji Yu, Jinsheng Sun*, Thermal cycling agingeffects on the ratcheting behavior of anisotropic conductive film, Soldering & Surface Mount Technology. 2015, 27(4): 185-194. (SCI: CQ4OG)
[14]Gang Chen*, Ling-tao Lu, Yun Cui, Rui-si Xing,Hong Gao, Xu Chen, Ratcheting and low-cycle fatigue characterizations of extruded AZ31B Mg alloy with and without corrosive environment, Int. J Fatigue, 2015, 80:364-371.
[15] Peng Wu,Hong Gao,Jinsheng Sun*, Yulan Ji, Fan Wang, Chunmei Gong, Characterization of Biomass Adsorbent ZSG-1 through Isopropanol and Water Azeotrope Dehydration. Chemical Engineering Communications, 2015, 202(2): 252-259. (SCI: AP7TN/ EI: 20**1)
[16] Jin Zhao, Lilan Gao, HongGao*, Xin Yuan, Xu Chen, Biodegradable behaviour and fatigue life of ZEK100magnesium alloy in simulated physiological environment, Fatigue & FractureEngineering Materials & Structure. 2015,38(8):904-913(SCI: CL9YP /EI:20**7）
[17] Wenguo Zhang, Jianhua Ma, Lilan Gao, Zhe Zhang,Hong Gao*, Fatigue life and resistance analysis of COG assemblies under hygrothermal aging, Microelectronics Reliability. 2015,55(3-4):623-629. (SCI: CD2PC/ EI:20**6 )
[18] Hong Gao, Dong Zhang, Lilan Gao, The coupling effect oftemperature, electric current and stress on the adhesion and electricalproperties of COG assembly, Microelectronics Reliability. 2014,54(8):1603-1612. (SCI:AO6OC / EI:20**2
[19] JinshengSun; Leilei Dai; Ming Shi; Hong Gao*;Xijia Cao; Guangxin Liu, Further optimization to a parallel double-effectorganosilicon distillation scheme through exergy analysis, Energy, 2014,69:370-377. (SCI: AJ7CZ/ EI:20**2)
[20] Hong Gao, Jian Ma, Li-Lan Gao et al, A Study on the Fatigue Behaviorof Anisotropic Conductive Adhesive Film, IEEE TransactionsonDeviceandMaterialsReliability.2014,14(2):681-688. (SCI: AI8CG / EI:20**5 )
[21]Wenjuan Xu ,Hong Gao *, LiLan Gao , Jianhua Ma, Xu Chen, Uniaxial time-dependent ratcheting behavior of bronze filled polytetrafluoroethylene at room and high temperature, Polymer Engineering and Science,2014, 54(7):1571-1578.(SCI: AJ4TJ / EI:20**0)
[22]Hong Gao, Jianhua Ma, LilanGao, Fatigue and resistance analysis of COG modules using electro-mechanical coupling method， Microelectronics Reliability，2014, 54：816-824. (SCI: AG2YN / EI:20**8)
[23] Jinsheng Sun, Xubo Luo, Shuo jiang, Wenping Wang, Hao Lv, Pei Wang, Hong Gao*, CFD hydrodynamic analysis of a cross orthogonal fixedvalve tray, Chemical Engineering & Technology，2014,37:3383-391. ( SCI: AB7XZ / EI: 20**7)
[24] Jinsheng Sun, Wenping Wang, Pei Wang, Hao Lv, Xubo Luo, Hong Gao*, Biosorptive Distillations to Purify Isopropanol: Improvements Over the Current Process in Terms of Energy Consumption and Exergy, Asia-Pacific Journal of Chemical Engineering, 2014,9:293-302. ( SCI: AE9EC/EI: 20**9)
[25] Dong Zhang, Hong Gao*, LilanGao, Jianhua Ma, Uniaxial ratcheting behavior of hygrothermal aging anisotropic conductive adhesive film, Polymer Testing, 2013, 32:1545-1550( SCI: 282AY / EI:20**2)
[26] Jinsheng Sun, Wenping Wang, Pei Wang, Hao Lv, Xubo Luo, Hong Gao*, Comparison ofalcohol-water azeotropes dehydration by compound starch-based adsorbent and its regeneration, Adsorption Science & Technology, 2013,31(9):829-843.( SCI:280FR/20**5)
[27] Jinsheng Sun, Fan Wang, Tingting Ma, Hong Gao*, Peng Wu, Lili Liu, Energy and exergy analysis of a five-column methanol distillation scheme, Energy , 2012,45(1): 696-703. (SCI: 074ZR)
[28] Wenjuan Xu, Hong Gao*, Lilan Gao et al,Tensile ratcheting behaviors of bronze powder filled polytetrafluoroethylene,Front. Chem. Sci. Eng., 2013, 7(1):103-109.
[29] Jinsheng Sun, Fan Wang, Tingting Ma, Hong Gao*, Yanzhen Liu, Fang Cai, Exergy analysis of a parallel double-effect organosilicon monomer distillationscheme, Energy, 2012,47(1):498-504. (SCI: 012NR)
[30] Jian Ma, Hong Gao*, Xu Chen, Uniaxial ratcheting behavior of anisotropic conductive adhesive film at elevated temperature, Polymer Testing, 2011,30:571-577.( SCI: 788UX )
[31]Hong Gao, Xu Chen, Effect of axial ratcheting deformation on torsional low cycle fatigue life of lead-free solder Sn-3.5Ag，Int. J Fatigue, 2009, 31:276-283 (SCI: 454VI ) .
[32]Gong, Chunmei; Gao, Hong; Wu, Peng; Sun, Jinsheng; Li, Jing，Hybrid distillation-biomass adsorption process for isopropanolwater azeotrope separation. Asia-Pacific Journal of Chemical Engineering, 2013, 8(1):77-84. ( SCI: 091XV)
[33] Sichao Fu, Hong Gao, Gang Chen, Lilan Gao, Xu Chen,Deterioration of mechanical properties for pre-corroded in simulated physiological environment, Materials Science and Engineering A, 2014,593:153-162.( SCI: AB0ST/ EI:20**0)
[34] Li-Lan Gao, Xu Chen, Hong Gao, Shear strength of anisotropic conductive adhesive joints under hygrothermal aging and thermal cycling,International Journal of Adhesion & Adhesives.2012,33:75-79.(SCI:890HH)
[35] Li-Lan Gao, Xu Chen, Hong Gao, Mechanical properties of anisotropic conductive adhesive film under hygrothermal aging and thermal cycling, Journal of Electronic Materials, 2012, 41(7) :2001~2009. (SCI:950NB )
[36] Peng Wu, Hong Gao, Jinsheng Sun, Tingting Ma et al, Biosorptive Dehydration of Tert-butyl Alcohol Using a Starch-based Adsorbent: Characterization and Thermodynamics. Bioresource Technology, 2012, 107(3):437-443.( SCI:910ES)
[37] Cui, Yue, Gao, Hong, Sun, Jinsheng; Wang, Yanhong; Chen, Xu; Jiang, Shuo, Numerical simulation of gas–solid flow in a conveying vessel, Powder Technology, v 226, p34-42, August 2012. (SCI:972DE)
[38] Shuo Jiang, Hong Gao, Jinsheng Sun, Yanhong Wang et al, Modeling fixed triangular valve tray4hydraulics using computational fluid dynamics, Chemical Engineering and Processing: Process Intensification, 2012, 57(2):74-84. (SCI: 918TT)
[39] Li-Lan Gao, Lei Wang, Hong Gao,Gang Chen, Xu Chen, Fatigue life evaluation of anisotropic conductive adhesive film joints under mechanical and hygrothemal loads, Microelectronics Reliability, Microelectronics Reliability, 2011,51:1393-1397. ( SCI: 797EF)
[40] Yulan Ji, Hong Gao, Jinsheng Sun, Fang Cai, Experimental probation on the binding kinetics and thermodynamics of Au(III) onto Bacillus subtilis, Chemical Engineering Journal, 2011, 172(1):122-128. (SCI: 827OW)
[41] Yue Liu, Hong Gao, Jinsheng Sun, Yanhong Wang et al, Novel packing enhanced distillation separation of isoamyl alcohol isomer: Experimental and Pilot Scale Study, AICHE JOURNAL, 2011, 57(11):3037-3041. ( SCI: 835VE)
[42] Jian Ma, Hong Gao, Xu Chen, Preparation of composite conductive microspheres used in anisotropic conductive adhesive films, Advanced Materials Research, Vols.194-196,(2011) pp643-647. ( EI:917)
[43] Yue Cui, Hong Gao, Jinsheng Sun, Xu Chen, Hydrodynamics simulation of gas-solid flow field in conveyingvessel, Advanced Materials Research, Vols.236-238,(2011) pp1528-1531. ( EI:133)
[44] Li-Lan Gao, Xu Chen, Hong Gao, Shu-Bao Zhang, Description of Nonlinear Viscoelastic Behavior and Creep Rupture Time of Anisotropic Conductive Film, Materials Science and Engineering A, 2010,527:5115-5121.( SCI: 623QH)
[45] Youliang Guan, Xu Chen, Feng-qin Li, Hong Gao, Study on the curing process and shearing tests of die attachment by Ag-epoxy, International Journal of Adhesion & Adhesives, 2010,30(2):80-88. (SCI: 549TW)
[46] Yanhong Wang, Hong Gao, Jinsheng Sun et al., Selective Reinforced Competitive Biosorption of Ag (I) and Cu (II) on Magnetospirillum Gryphiswaldense, Desalination, 2011, 270:258-263.( SCI:737QS)
[47] Wang Yanhong, Gong Chunmei, Sun Jinsheng, Gao Hong et al, Separation of ethanol/water azeotrope using compound starch-based adsorbents. Bioresource Technology,2010, 101(15): 6170-6176. (SCI:601CP)
[48] Liubing Wang, Hong Gao, Xu Chen, Residual Stress Analysis in Curing Process of COG Module, 2nd International Conference on Advances in Product Development and Reliability, Advanced Materials Research Vols,118-120 (2010) pp 434-438. ( EI: 737)
[49] Li-Lan Gao, Xu Chen, Hong Gao, Creep-Recovery Behaviors of Anisotropic Conductive Adhesive FilmWith Temperature and Hygrothermal Aging, Advanced Materials Research Vols,509 (2010) pp 16-21.
[50] Ning Bai, Xu Chen, Hong Gao, Simulation of uniaxial tensile properties for lead-free solders with modified Anand model，Materials and Design，2009, 30:122-128. (SCI: 391PK )
[51] Yun-Hui Mei, Xu Chen, Hong Gao, Hygrothermal effects on the tensile properties of anisotropic conductive films, Journal of ELECTRONIC MATERIALS, 2009, 38(11):2415-2426. (SCI: 504RL)
[52] Li-Lan Gao, Xu Chen, Shu-Bao Zhang, Hong Gao, Mechanical properties of anisotropic conductive film with strain rate and temperature, Materials Science and Engineering A, 2009, 513–514 :216–221. (SCI: 452YP)
授权发明专利：
1. 各向异性导电胶膜用复合导电粒子及制备方法,申请号8.0，公告号 A ，授权公告号B（第1发明人）。
2. 一种混合戊烷同分异构体精细分离的双效精馏方法及其系统，申请号8.0，公告号，授权公告号B（第2发明人）；
3. 复合式气体分布器，申请号6.1，公告号，授权公告号B（第2发明人）；
4. 催化裂化装置下游分离系统提高液化气收率的方法，申请号5.7，公告号，授权公告号B（第3发明人）；
5. 焦化吸收稳定节能工艺，申请号7.6，公告号，授权公告号B（第3发明人）；
6. 甲醇双效精馏高弹性组合工艺及其系统，申请号8.4，公告号，授权公告号B（第3发明人）；
7. 一种碳五馏分萃取溶剂的变压汽提方法，申请号1.6，公告号，授权公告号B（第2发明人）；
8. 节能节水型有机硅单体精馏方法，申请号0.8，公告号，授权公告号B（第3发明人）。
9. 一种对分离了双烯烃的碳五抽余原料进行深加工的方法，申请号.1，公告号A，授权公告号B（第3发明人）。
10. 大型甲醇多效精馏节能装置及甲醇多效精馏节能工艺，申请号.5，公告号A，授权公告号 B（第4发明人）。

---

高　红现任职称/职务：研究员
通讯地址：天津大学化工学院过程装备与控制工程系
电子邮箱：hgao@tju.edu.cn
办公电话：
合作交流: 2011.9-2012.9 在美国橡树岭国家实验室，访问****。