姓名梁小平
导师资质硕士生导师
职称教授
职务
所在系无机材料系
最高学位及获取院校博士 天津大学
办公电话
手机**
邮箱tjpulxp@tjpu.edu.cn
通信地址及邮编天津工业大学材料学院300387
办公地址材料学院B428
教育背景及工作经历教育背景及工作经历教育背景

1993年毕业于鞍山钢铁学院化工系，获学士学位；

2001年毕业于鞍山科技大学材料学院，获硕士学位；<?XML:NAMESPACE PREFIX = O />

2003年毕业于天津大学材料学院，获博士学位。

工作经历

1993-1995年 青海省西宁钢厂，助工

1995-1998年 辽宁鞍山市玻璃厂，技术员

2004-2006年 天津大学机械学院博士后

2003.8-至今 天津工业大学材料科学与工程学院，教授、硕士研究生导师

2004年 英国 Leeds of University 访问学者

2011年 美国Arizona State University访问学者
研究领域研究领域1. 陶瓷材料：氧化物工程陶瓷、纳-微米陶瓷粉体、陶瓷膜、陶瓷纤维、高级耐火材料等。

2. 材料表面工程：化学镀、溶胶凝胶法、电镀、化学气相沉积、磁控溅射等。

3. 新能源材料与环境材料：电催化材料、长余辉发光材料、电致发光材料、LOW-E玻璃、气体分离材料、锂离子电池、太阳能电池等。
讲授课程本科：材料科学基础、材料制备工艺与设计、特种陶瓷、无机非金属材料工艺、大型综合实验等；研究生：材料结构与性能、材料表面工程、功能陶瓷
主要承担项目主要承担项目主持和参与完成了国家863资助项目2项，国家自然科学基金资助1项，中国博士后科学基金资助项目1项，天津市自然科学基金重点项目1项，天津市人才发展基金1项，天津市人事局优秀博士后赴欧考察项目1项，天津市教委资助项目1项，天津工业大学博士资助项目1项，天津工业大学教改项目1项，企业委托项目5项。

目前在研的课题有：




1. 广东省肇庆高新区科技计划项目：基于空调压缩机滚动活塞的高耐磨绝热复合涂层的研制<?XML:NAMESPACE PREFIX = O />

2. 国家中小企业创新基金：新型UV光致发光防伪油墨的研制

3. 企业委托项目：电致变色玻璃的研究 4. 企业委托项目：磁控溅射氧化锆薄膜的研究

5. 企业委托项目：玻璃丝网印刷用发光釉的研制

6. 天津工业大学学位与研究生教育改革研究项目：研究生课程《材料结构与性能》的教学改革探索与实践
作品、成就及荣誉专著
1. 梁小平，耐火材料英汉小辞典，化学工业出版社，2008

2. 严峻爱，梁小平等，智能建筑，北京大学出版社，2005

3. 张季梅，梁小平，有机化合物波普分析，纺织工业出版社，2013




论文




1. Wang R T, Liang, X P*and Peng Y(2010)，A novel method for the synthesis of nano-sized MgAl2O4spinel ceramic powders,Journal of Ceramic Processing Research ,11(2):L 173-175 (SCI)

2. Lu Q, Liang X P*, Wang G H(2010), Effects of Low Temperature Degradation on Friction and Wear Properties of 3Y-TZP Ceramics, Tribology, 1: 18-21（EI）

3. Fan X W, Liang X P*(2009), Preparation of nano-TiO2 powder by polyacrylamide gel method, Proceedings of SPIE, The International Society for Optical Engineering, 2nd International Conference on Smart Materials and Nanotechnology in Engineering (EI)

3. Liu L, Liang X P*and Li Q Z (2010), Study on the Slurry for Alumina Foam Ceramic, Bulletin of the Chinese Ceramic Society, 29(2): 288-291 (in Chinese)

4. Fan X W, Liang X P*, Huai X G and Li J X(2010) , Effect of the grain size on the wear resistance of Al2O3dispersed Y-TZP ceramics，Journal of Ceramic Processing Research ,11(3): 328-330 (SCI)

5. Shi W Y, He B Q, Ding J C, Li J X*, Yan F and Liang X P（2010）, Preparation and characterization of the organic-inorganic hybrid membrane for biodiesel production, Bioresour Technol, 101(5): 1501-1505 (SCI)

6. Feng Y H, He B Q,Cao YH, Li J X*, Liu M, Yan F and Liang X P(2010), Biodiesel production using cation-exchange resin as heterogeneous catalyst, Bioresour Technol, 101(5): 1518-1521 (SCI)

7. Ou J W, Li S H, Liang X P*, Wang F Z and Li S Y(2010), Study on fractal morphology of crystallizati0n of NaCl dilute solution, Physics Experimentation, 30(3): 39-41 (in Chinese)

8. Wang R T, Liang, X P*and Peng Y(2009)，Investigation on preparation of nano Mg-Al hydrotalcite and its flame retardancy to polyurethane，Journal of Functional Materials, 40(12): 58-61 (in Chinese)(EI)

9. Wang, R T, Liang, X P,*Peng Y(2009)，Effect of the reaction temperature on nanocry stallites MgAl2O4spinel ceramic precursor,Journal of Ceramic Processing Research , 10(6): 780-782 (SCI)

10. Bai X, Jia T*, Cheng B W, Zhao H L and Liang X P(2009), The Influence of the Binders on Compaction of Glass Batch, Bulletin of the Chinese Ceramic Society, 28(3): 585-588 (in Chinese)

11. Liang X P*, Wang X H, and Xin S B(2008),Wear Properties of Y-TZP Ceramics Dispersed with Second Phase Particles,Key Engineering Materials, 368-372: 744-747(EI)

12. Wang X H, Liang X P*and Xin S B(2008), Preparation of Silicon Dioxide Fiber via Sol-Gel Process,Key Engineering Materials,368-372: 794-796(EI)

13. Xin S B, Liang X P*and Wang X H(2008), Wear Properties of Basalt Fibers Reinforced Composites,Key Engineering Materials,368-372: 1011-1012(EI)

14. Lu Q, Liang X P*and Wang G H(2008), Research about the Wear Transition Mechanism of Zirconia Ceramic, Bulletin of the Chinese Ceramic Society, 27(4): 772-776 (in Chinese)

15. Wang G H, Liang X P*, Lu Q and Gu Y F(2008), The Influence of Boric Acid Content on Luminescent Properties of SrAl2O4, Spectroscopy and Spectral Analysis 28(5): 1020-1022 (in Chinese) (EI)

16. Wang G H, Liang X P*, Shi Y T and Lu Q (2008), Research Status of High Dielectric Constant Microwave Dielectric Ceramics, Bulletin of the Chinese Ceramic Society, 27(2): 312-317 (in Chinese)

17. Fan X W, Liang X P*and Gao Y Y (2007), Preparation and properties study of UV agent of nano-TiO2-CeO2composite powder, Journal of Functional Materials, 38(A08): 3105-3107 (in Chinese)

18. Liang X P,*Dou S J, Qu D L and Zhang X P(2007) ,Study on alumina buildup-resistant performance of MgAION liner material of submerged entry nozzle, Journal of Functional Materials, 38(A08): 3285-3287 (in Chinese)

19. Wang X H, Liang X P*and Wang R T(2007), The preparation and characterization of magnesium-aluminium hydrotalcite by liquid coprecipitation method, Journal of Functional Materials, 38(A07): 2803-2804 (in Chinese)

20. Liang X P*, Wang X H, Yue X M and Cheng B W(2007), Effect of feeding sequence on the preparation of Mg,Al-hydrotalcite, Journal of Functional Materials, 38(A07): 2805-2806(in Chinese)

21. Wang G H, Liang X P*, Lu Q and Gu Y F(2007), Study on long persistence phosphor of Eu2＋, Dy3＋co-doped alkaline earth aluminates, Journal of Functional Materials, 38(A01): 132-134 (in Chinese)

22. Chen L H, Liang X P*, Xin S B and Wang X H(2007), The XRD analysis of nano-TiO2made by sol-gel method, Foshan Ceramics, 17(5): 12-13 (in Chinese)

23. Liang X P*and Anne Nevill(2007), The Bio-tribological Properties of Al2O3Strengthened Y-TZP Ceramic316LStainless Steel Pairs under Different Lubricant, Lubrication Engineering, 32(3): 67-69 (in Chinese)

24. Liang X P*and Anne Nevill(2007), Preparation and wet erosive wear characteristics of porous Al2O3ceramics, Key Engineering Materials,336 -338: 2458-2461 (EI)

25. Liang X P*, Lu Q, Wang G H and Yang Z F(2007), Effect of Porous 0n the Friction and W ear of Zirconia Matrix Ceramics, Lubrication Engineering, 32(9): 39-41 (in Chinese)

26. Liang X P*and Anne Nevill(2007), Effect of Surface Roughness on the Bio-tribological Properties of Al2O3Strengthened Y-TZP Ceramic-316LStainless Steel Pairs, Lubrication Engineering, 32(2): 51-53 (in Chinese)

27. Liang X P*, Yang Z F, Jin Z G and Yuan Q M (2006), Effect of Load on Wear Properties of Alumina Strengthen Y-TZP Ceramic, Tribology, 26(1): 60-63 (in Chinese) (EI)

28. Zhao S H, Liang X P*, Wang X H, Xin S B and Yang Z F(2006), Study on W ear Properties of 3 Y-TZP Ceramic under Water Lubrication, Lubrication Engineering, 31(5): 103-105 (in Chinese) (EI)

29. Xin S B, Liang X P*, Xu X W and Wang X H(2006), FTIR Sudy on V2 Defect in Fast Neutron Irradiated CZSi, Bulletin of the Chinese Ceramic Society, 25(5): 155-157 (in Chinese)

30 Liang X P*, Wang X H and Xin S B(2006), Ultraviolet spectrum of nanometer zinc oxide prepared by sol-gel process, Rare Metal Materials and Engineering , 35(z3):506-507 (SCI)

31. Liang X P*, Wang X H and Xin S B(2006), Comparison of characteristics of sol-gel and precipitation synthesis of nanosized ZnO powders, Rare Metal Materials and Engineering , 35(z3): 567-569 (SCI)

32. Wang X H, Liang X P*,and Xin S B(2006), Study of Microwave Absorbing Properties of Nanometer Fe-Al Solid Solution, Rare Metal Materials and Engineering , 35(z3): 533-34 (SCI)

33. Liang X P*, Yang Z F and Yuan Q M(2005), Effect of microstructure on the wear risistance of alumina dispersed Y2O3-ZrO2ceramic, Key Engineering Materials, 280- 283：1069-1073 (SCI)

34. Liang X P*, Jin Z G, Zhu C H and Hu Z H(2005), Effect of pore-making agent on properties of porous alumina ceramic, Journal of Tianjin Polytechnic University, 25(3): 17-19 (in Chinese)

35. Zhao S H, Yang Z F, Liang X P*and Jin Z G (2005), Wear Properties of 3 Y-TZP／(Mg,Y)-PSZ Ceramic Pair under Dry Conditions, Lubrication Engineering, 30(7): 96-98 (in Chinese) (EI)

36.Liang X P*, Yang Z F and Yuan Q M(2004), Friction and Wear Behavior of Rod-Like Mullite Dispersed Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics, Tribology, 24(4): 193-196 (in Chinese) (EI)

37. Liang X P*, Yang Z F, Zhao S H and Yuan Q M (2004), Study on the Effect of Abrasive Particles on the Wear Properties of Alumina Reinforced Y-TZP Composite, Lubrication Engineering, 29(3):18-21 (in Chinese) (EI)

39. Qu D L, Sun J L*, Hong R Y, Zhu S J and Liang X P(2004), Effect of Aluminum titanate on properties of MgAION compound material, Energy For Metallurgical Industry, 23(5): 51-53 (in Chinese)

40.Qu D L, Sun J L*, Hong R Y, Zhu S J and Liang X P(2004), Research on anti-A1203adhesion of MgAlON-Al203-Ti02compound material, Energy For Metallurgical Industry, 23(4): 49-51 (in Chinese)

41.Liang X P*, Yang Z F, Li J Y, Yuan Q M and Liu Z F (2004), Effect of Y2O3Adding Method On Abrasive Wear of Al2O3/Y-TZP Ceramics, Journal of Synthetic Crystals, 33(4)：601-604

42 Liang X P*, Yang Z F, Liu Z F, Yuan Q M, Li J Y and Gao H(2003), Study on the Abrasive Wear of Rubber Materials-Zirconia Toughened Ceramics, Lubrication Engineering, 28(3): (in Chinese) (EI)

43. Liang X P*, Yang Z F, Jin Z G, Zhao S H and Yuan Q M (2004), Effect of Microstructure on Milling Abrasive Wear of Al2O3/Y-TZP Composites, Lubrication Engineering, 29(7): 11-13(in Chinese) (EI)

44. Liang X P*, Yang Z F, Li J Y, Yuan Q M, Liu Z F, Liu J C and Gao H(2003), Comparative Study of Microstructures and Abrasive Wear-resistance of Two Y-TZP/Al203Ceramics, Tribology, 23(4): 296-300 (in Chinese) (EI)

45. Li X H*, Yuan Q M, Yang Z F and Liang X P(2003), Mechanical Properties of Laminated Y-TZP Ceramics Containing A1203, Bulletin of the Chinese Ceramic Society, 22(3): 82-84 (in Chinese)

46.Liang X P*, Yang Z F, Yuan Q M, Guo R S and Li X H (2003), Research Development of Speciality on Y-TZP, Bulletin of the Chinese Ceramic, 22(3): 62-67 (in Chinese)

47.Liang X P*and Zhao S H (2003), Application of Engineering Ceramics in Abrasion Resistant of the Converter Dedust Fan, Advanced Ceramics, 24(2)31-36 (in Chinese)

48. Liang X P*, Yang Z F Zhao S H and Yuan Q M(2002), Study on the Surface Temperature of Y-TZP Ceramic Under Dry Friction, Rare Metal Materials and Engineering, 31(6):857-860 (in Chinese)(SCI)

49. Liang X P*, Yang Z F and Yuan Q M (2001), Applications of Rare Earth Oxides in Structural Ceramic Materials, Journal of Rare Earths, 19(z): 49-52 (in Chinese)




部分会议论文




Y H Cao,F Yan, J X Li and X P Liang, Structural and composing analysis of waste lubricant oil purified by a membrane process, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

FAN X W , LIANG X P*, Wang R T and Li J X, Preparation and properties study of Nanometer Titanium Dioxide, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

FAN X W, LIANG X P*, Wang R T and Li J X, Development of the sorbent on the regeneration of used lubricating oil, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

4. WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Effect of Reaction Temperature on Mg-Al Hydrotalcite Nanocrystalline, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Effect of pH Value on Preparation of UV Agent of ZnO Nanoparticles, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, reparation and Characterization of Mg-Al Hydrotalcite Nanoparticles, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Preparation of Ultrafine Mg-Al Spinel Powders by Polyacrylamide Gel Method, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

Feng Yan,Ming Huo, Daogeng Wu, Jianxin Li,* Benqiao He,Xiaoping Liang, Recovery of phytosterols from waste residue of Soybean oil deodorizer distillate, Challenges in Environmental Science and Engineering(CESE-2009),Townsville,Australia,14-17 July 2009. (oral) (ISBN978-0-9805-5866-1) p49.

Wenying Shi, Benqiao He, Jianxin Li *, Xiaoping Liang, Feng Yan, Preparation and characterization of the Organic-Inorganic Hybrid Membrane for Biodiesel Production, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(oral)(ISBN978-0- 9805-5866-1) p56.

Rongtao Wang, Xiaoping Liang﹡, Jianxin Li, Benqiao He, Ying Peng, Preparation and Characterization of Mg-Al Hydrotalcite for Biodiesel Synthesis, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(poster)(ISBN978- 0-9805-5866-1) p83.

Yuhe Cao, Feng Yan, Jianxin Li*, Xiaoping Liang,Benqiao He, Used Lubricating Oil Recycling Using a Membrane Filtration: Efficiency, Structural and Composing Analysis, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(poster)(ISBN978- 0-9805-5866-1) p83.

Yaohui Feng, Yuhe Cao, Jianxin Li*，Benqiao He, Feng Yan, Xiaoping Liang, Biodiesel production using cation-exchange resins, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(oral)

12. Liang X P, Jin Z G, Bian D C and Su D M,An investigation of the scratch and the corrosion behaviours of sol-gel SiO2 films on glass substrate,16th International Corrosion Congress, Beijing, 19-24, September, 2005(oral)

13. Zhao S H, Liang X P, Jin Z G and Li W D,Comparison of corrosion and wear behaviour of Al2O3coating without and with dispersing aluminium powder in alumina sol,16th International Corrosion Congress,Beijing, 19-24, September, 2005




专利




[1] 梁小平，王光辉，陆青，一种高孔隙率氧化铝多孔陶瓷的制备方法.授权专利号：**7.X，

[2] 梁小平，王化平，王家丹，刘建，任素娥，李冬梅，左蕊，李建新.一种氧化铝／石英玻璃复合纤维的制备方法.专利号：**2.1

[3] 梁小平，王化平，刘建，李冬梅，左蕊，毛新钰，刘凯，李建新.一种氧化铝纤维的溶胶凝胶制备方法.专利号：**4.7

[4] 梁小平，王化平，刘建，李冬梅，左蕊，毛新钰，刘凯，李建新.一种氧化铝-氧化锆复合纤维的溶胶凝胶制备方法.专利号：**2.8

[5] 梁小平，刘建，王化平，任素娥，李冬梅，左蕊，李建新.一种锂离子电池正极材料镍钴锰酸锂LiNixCoyMn1-x-yO2的制备方法.专利号：**6.4

[6] 梁小平，左蕊，王化平，李冬梅，李建新，王虹，何本桥，严峰.一种用于洗发水的防晒保湿剂的制备.专利号：**9.X

[7] 梁小平，任素娥，王化平，刘建，刘磊，李建新，王虹.一种用于酚醛塑料槽筒表面改性的制备方法.专利号：**3.8

[8] 梁小平，任素娥，刘建，王化平，李建新，王虹，何本桥.一种非损伤液氮测定多孔陶瓷材料气孔率的方法.专利号：**0.5

[9]梁小平，任素娥，刘建，王化平，李冬梅，左蕊，李建新，一种可用于高温CO2气体分离的LSCF/碳酸盐双相膜的制备方法,专利号：**8.3

[10] 梁小平，任素娥，刘建，王化平，李建新，王虹，何本桥，一种陶瓷/熔盐双相复合气体分离膜的制备方法，专利号：**7.9

[11] 梁小平，任素娥，刘建，李冬梅，李建新，王虹，何本桥，一种无损多孔陶瓷材料气孔率的液氮测定方法，专利号：**0.5




获奖


1. 2001年 获辽宁省科技进步一等奖

2. 2002年 获天津大学优秀学生干部

3. 2007年 指导本科生获第九届“挑战杯”天津市大学生课外学术科技作品竞赛二等奖

4. 2007年 获天津市教委教改论文优秀奖

5. 2009年 获天津工业大学优秀教师

6. 2010年 获天津工业大学研究生学位论文优秀指导教师

7. 2011年 获天津工业大学第九届学生科技作品竞赛优秀指导教师

8. 2012年 获天津工业大学优秀教师

9. 2013年 获天津市科技进步三等奖



社会兼职天津市硅酸盐学会生态环境功能材料专业委员会委员，天津工业大学材料学院工会副主席，天津工业大学教代会代表，天津工业大学党代会代表，Asia-Pacific Journal of Chem. Eng.、西安交通大学学报、金属学报、纺织学报等国内外刊物的审稿人
<?XML:NAMESPACE PREFIX = O />

2003年毕业于天津大学材料学院，获博士学位。

工作经历

1993-1995年 青海省西宁钢厂，助工

1995-1998年 辽宁鞍山市玻璃厂，技术员

2004-2006年 天津大学机械学院博士后

2003.8-至今 天津工业大学材料科学与工程学院，教授、硕士研究生导师

2004年 英国 Leeds of University 访问学者

2011年 美国Arizona State University访问学者
研究领域 调用标识：{$channel[t_research]}}
研究领域1. 陶瓷材料：氧化物工程陶瓷、纳-微米陶瓷粉体、陶瓷膜、陶瓷纤维、高级耐火材料等。

2. 材料表面工程：化学镀、溶胶凝胶法、电镀、化学气相沉积、磁控溅射等。

3. 新能源材料与环境材料：电催化材料、长余辉发光材料、电致发光材料、LOW-E玻璃、气体分离材料、锂离子电池、太阳能电池等。
讲授课程 调用标识：{$channel[t_teaching]}}
本科：材料科学基础、材料制备工艺与设计、特种陶瓷、无机非金属材料工艺、大型综合实验等；研究生：材料结构与性能、材料表面工程、功能陶瓷
主要承担项目 调用标识：{$channel[t_project]}}
主要承担项目主持和参与完成了国家863资助项目2项，国家自然科学基金资助1项，中国博士后科学基金资助项目1项，天津市自然科学基金重点项目1项，天津市人才发展基金1项，天津市人事局优秀博士后赴欧考察项目1项，天津市教委资助项目1项，天津工业大学博士资助项目1项，天津工业大学教改项目1项，企业委托项目5项。

目前在研的课题有：




1. 广东省肇庆高新区科技计划项目：基于空调压缩机滚动活塞的高耐磨绝热复合涂层的研制<?XML:NAMESPACE PREFIX = O />

2. 国家中小企业创新基金：新型UV光致发光防伪油墨的研制

3. 企业委托项目：电致变色玻璃的研究 4. 企业委托项目：磁控溅射氧化锆薄膜的研究

5. 企业委托项目：玻璃丝网印刷用发光釉的研制

6. 天津工业大学学位与研究生教育改革研究项目：研究生课程《材料结构与性能》的教学改革探索与实践
作品,成就及荣誉 调用标识：{$channel[t_achievement]}}
专著
1. 梁小平，耐火材料英汉小辞典，化学工业出版社，2008

2. 严峻爱，梁小平等，智能建筑，北京大学出版社，2005

3. 张季梅，梁小平，有机化合物波普分析，纺织工业出版社，2013




论文




1. Wang R T, Liang, X P*and Peng Y(2010)，A novel method for the synthesis of nano-sized MgAl2O4spinel ceramic powders,Journal of Ceramic Processing Research ,11(2):L 173-175 (SCI)

2. Lu Q, Liang X P*, Wang G H(2010), Effects of Low Temperature Degradation on Friction and Wear Properties of 3Y-TZP Ceramics, Tribology, 1: 18-21（EI）

3. Fan X W, Liang X P*(2009), Preparation of nano-TiO2 powder by polyacrylamide gel method, Proceedings of SPIE, The International Society for Optical Engineering, 2nd International Conference on Smart Materials and Nanotechnology in Engineering (EI)

3. Liu L, Liang X P*and Li Q Z (2010), Study on the Slurry for Alumina Foam Ceramic, Bulletin of the Chinese Ceramic Society, 29(2): 288-291 (in Chinese)

4. Fan X W, Liang X P*, Huai X G and Li J X(2010) , Effect of the grain size on the wear resistance of Al2O3dispersed Y-TZP ceramics，Journal of Ceramic Processing Research ,11(3): 328-330 (SCI)

5. Shi W Y, He B Q, Ding J C, Li J X*, Yan F and Liang X P（2010）, Preparation and characterization of the organic-inorganic hybrid membrane for biodiesel production, Bioresour Technol, 101(5): 1501-1505 (SCI)

6. Feng Y H, He B Q,Cao YH, Li J X*, Liu M, Yan F and Liang X P(2010), Biodiesel production using cation-exchange resin as heterogeneous catalyst, Bioresour Technol, 101(5): 1518-1521 (SCI)

7. Ou J W, Li S H, Liang X P*, Wang F Z and Li S Y(2010), Study on fractal morphology of crystallizati0n of NaCl dilute solution, Physics Experimentation, 30(3): 39-41 (in Chinese)

8. Wang R T, Liang, X P*and Peng Y(2009)，Investigation on preparation of nano Mg-Al hydrotalcite and its flame retardancy to polyurethane，Journal of Functional Materials, 40(12): 58-61 (in Chinese)(EI)

9. Wang, R T, Liang, X P,*Peng Y(2009)，Effect of the reaction temperature on nanocry stallites MgAl2O4spinel ceramic precursor,Journal of Ceramic Processing Research , 10(6): 780-782 (SCI)

10. Bai X, Jia T*, Cheng B W, Zhao H L and Liang X P(2009), The Influence of the Binders on Compaction of Glass Batch, Bulletin of the Chinese Ceramic Society, 28(3): 585-588 (in Chinese)

11. Liang X P*, Wang X H, and Xin S B(2008),Wear Properties of Y-TZP Ceramics Dispersed with Second Phase Particles,Key Engineering Materials, 368-372: 744-747(EI)

12. Wang X H, Liang X P*and Xin S B(2008), Preparation of Silicon Dioxide Fiber via Sol-Gel Process,Key Engineering Materials,368-372: 794-796(EI)

13. Xin S B, Liang X P*and Wang X H(2008), Wear Properties of Basalt Fibers Reinforced Composites,Key Engineering Materials,368-372: 1011-1012(EI)

14. Lu Q, Liang X P*and Wang G H(2008), Research about the Wear Transition Mechanism of Zirconia Ceramic, Bulletin of the Chinese Ceramic Society, 27(4): 772-776 (in Chinese)

15. Wang G H, Liang X P*, Lu Q and Gu Y F(2008), The Influence of Boric Acid Content on Luminescent Properties of SrAl2O4, Spectroscopy and Spectral Analysis 28(5): 1020-1022 (in Chinese) (EI)

16. Wang G H, Liang X P*, Shi Y T and Lu Q (2008), Research Status of High Dielectric Constant Microwave Dielectric Ceramics, Bulletin of the Chinese Ceramic Society, 27(2): 312-317 (in Chinese)

17. Fan X W, Liang X P*and Gao Y Y (2007), Preparation and properties study of UV agent of nano-TiO2-CeO2composite powder, Journal of Functional Materials, 38(A08): 3105-3107 (in Chinese)

18. Liang X P,*Dou S J, Qu D L and Zhang X P(2007) ,Study on alumina buildup-resistant performance of MgAION liner material of submerged entry nozzle, Journal of Functional Materials, 38(A08): 3285-3287 (in Chinese)

19. Wang X H, Liang X P*and Wang R T(2007), The preparation and characterization of magnesium-aluminium hydrotalcite by liquid coprecipitation method, Journal of Functional Materials, 38(A07): 2803-2804 (in Chinese)

20. Liang X P*, Wang X H, Yue X M and Cheng B W(2007), Effect of feeding sequence on the preparation of Mg,Al-hydrotalcite, Journal of Functional Materials, 38(A07): 2805-2806(in Chinese)

21. Wang G H, Liang X P*, Lu Q and Gu Y F(2007), Study on long persistence phosphor of Eu2＋, Dy3＋co-doped alkaline earth aluminates, Journal of Functional Materials, 38(A01): 132-134 (in Chinese)

22. Chen L H, Liang X P*, Xin S B and Wang X H(2007), The XRD analysis of nano-TiO2made by sol-gel method, Foshan Ceramics, 17(5): 12-13 (in Chinese)

23. Liang X P*and Anne Nevill(2007), The Bio-tribological Properties of Al2O3Strengthened Y-TZP Ceramic316LStainless Steel Pairs under Different Lubricant, Lubrication Engineering, 32(3): 67-69 (in Chinese)

24. Liang X P*and Anne Nevill(2007), Preparation and wet erosive wear characteristics of porous Al2O3ceramics, Key Engineering Materials,336 -338: 2458-2461 (EI)

25. Liang X P*, Lu Q, Wang G H and Yang Z F(2007), Effect of Porous 0n the Friction and W ear of Zirconia Matrix Ceramics, Lubrication Engineering, 32(9): 39-41 (in Chinese)

26. Liang X P*and Anne Nevill(2007), Effect of Surface Roughness on the Bio-tribological Properties of Al2O3Strengthened Y-TZP Ceramic-316LStainless Steel Pairs, Lubrication Engineering, 32(2): 51-53 (in Chinese)

27. Liang X P*, Yang Z F, Jin Z G and Yuan Q M (2006), Effect of Load on Wear Properties of Alumina Strengthen Y-TZP Ceramic, Tribology, 26(1): 60-63 (in Chinese) (EI)

28. Zhao S H, Liang X P*, Wang X H, Xin S B and Yang Z F(2006), Study on W ear Properties of 3 Y-TZP Ceramic under Water Lubrication, Lubrication Engineering, 31(5): 103-105 (in Chinese) (EI)

29. Xin S B, Liang X P*, Xu X W and Wang X H(2006), FTIR Sudy on V2 Defect in Fast Neutron Irradiated CZSi, Bulletin of the Chinese Ceramic Society, 25(5): 155-157 (in Chinese)

30 Liang X P*, Wang X H and Xin S B(2006), Ultraviolet spectrum of nanometer zinc oxide prepared by sol-gel process, Rare Metal Materials and Engineering , 35(z3):506-507 (SCI)

31. Liang X P*, Wang X H and Xin S B(2006), Comparison of characteristics of sol-gel and precipitation synthesis of nanosized ZnO powders, Rare Metal Materials and Engineering , 35(z3): 567-569 (SCI)

32. Wang X H, Liang X P*,and Xin S B(2006), Study of Microwave Absorbing Properties of Nanometer Fe-Al Solid Solution, Rare Metal Materials and Engineering , 35(z3): 533-34 (SCI)

33. Liang X P*, Yang Z F and Yuan Q M(2005), Effect of microstructure on the wear risistance of alumina dispersed Y2O3-ZrO2ceramic, Key Engineering Materials, 280- 283：1069-1073 (SCI)

34. Liang X P*, Jin Z G, Zhu C H and Hu Z H(2005), Effect of pore-making agent on properties of porous alumina ceramic, Journal of Tianjin Polytechnic University, 25(3): 17-19 (in Chinese)

35. Zhao S H, Yang Z F, Liang X P*and Jin Z G (2005), Wear Properties of 3 Y-TZP／(Mg,Y)-PSZ Ceramic Pair under Dry Conditions, Lubrication Engineering, 30(7): 96-98 (in Chinese) (EI)

36.Liang X P*, Yang Z F and Yuan Q M(2004), Friction and Wear Behavior of Rod-Like Mullite Dispersed Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics, Tribology, 24(4): 193-196 (in Chinese) (EI)

37. Liang X P*, Yang Z F, Zhao S H and Yuan Q M (2004), Study on the Effect of Abrasive Particles on the Wear Properties of Alumina Reinforced Y-TZP Composite, Lubrication Engineering, 29(3):18-21 (in Chinese) (EI)

39. Qu D L, Sun J L*, Hong R Y, Zhu S J and Liang X P(2004), Effect of Aluminum titanate on properties of MgAION compound material, Energy For Metallurgical Industry, 23(5): 51-53 (in Chinese)

40.Qu D L, Sun J L*, Hong R Y, Zhu S J and Liang X P(2004), Research on anti-A1203adhesion of MgAlON-Al203-Ti02compound material, Energy For Metallurgical Industry, 23(4): 49-51 (in Chinese)

41.Liang X P*, Yang Z F, Li J Y, Yuan Q M and Liu Z F (2004), Effect of Y2O3Adding Method On Abrasive Wear of Al2O3/Y-TZP Ceramics, Journal of Synthetic Crystals, 33(4)：601-604

42 Liang X P*, Yang Z F, Liu Z F, Yuan Q M, Li J Y and Gao H(2003), Study on the Abrasive Wear of Rubber Materials-Zirconia Toughened Ceramics, Lubrication Engineering, 28(3): (in Chinese) (EI)

43. Liang X P*, Yang Z F, Jin Z G, Zhao S H and Yuan Q M (2004), Effect of Microstructure on Milling Abrasive Wear of Al2O3/Y-TZP Composites, Lubrication Engineering, 29(7): 11-13(in Chinese) (EI)

44. Liang X P*, Yang Z F, Li J Y, Yuan Q M, Liu Z F, Liu J C and Gao H(2003), Comparative Study of Microstructures and Abrasive Wear-resistance of Two Y-TZP/Al203Ceramics, Tribology, 23(4): 296-300 (in Chinese) (EI)

45. Li X H*, Yuan Q M, Yang Z F and Liang X P(2003), Mechanical Properties of Laminated Y-TZP Ceramics Containing A1203, Bulletin of the Chinese Ceramic Society, 22(3): 82-84 (in Chinese)

46.Liang X P*, Yang Z F, Yuan Q M, Guo R S and Li X H (2003), Research Development of Speciality on Y-TZP, Bulletin of the Chinese Ceramic, 22(3): 62-67 (in Chinese)

47.Liang X P*and Zhao S H (2003), Application of Engineering Ceramics in Abrasion Resistant of the Converter Dedust Fan, Advanced Ceramics, 24(2)31-36 (in Chinese)

48. Liang X P*, Yang Z F Zhao S H and Yuan Q M(2002), Study on the Surface Temperature of Y-TZP Ceramic Under Dry Friction, Rare Metal Materials and Engineering, 31(6):857-860 (in Chinese)(SCI)

49. Liang X P*, Yang Z F and Yuan Q M (2001), Applications of Rare Earth Oxides in Structural Ceramic Materials, Journal of Rare Earths, 19(z): 49-52 (in Chinese)




部分会议论文




Y H Cao,F Yan, J X Li and X P Liang, Structural and composing analysis of waste lubricant oil purified by a membrane process, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

FAN X W , LIANG X P*, Wang R T and Li J X, Preparation and properties study of Nanometer Titanium Dioxide, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

FAN X W, LIANG X P*, Wang R T and Li J X, Development of the sorbent on the regeneration of used lubricating oil, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

4. WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Effect of Reaction Temperature on Mg-Al Hydrotalcite Nanocrystalline, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Effect of pH Value on Preparation of UV Agent of ZnO Nanoparticles, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, reparation and Characterization of Mg-Al Hydrotalcite Nanoparticles, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

WANG R T, LIANG X P*, Fan X W, Peng Y and Li J X, Preparation of Ultrafine Mg-Al Spinel Powders by Polyacrylamide Gel Method, the 12th Asian Pacific Conference of Chemical Engineering Congress, Dalian China,Aug. 4-6, 2008

Feng Yan,Ming Huo, Daogeng Wu, Jianxin Li,* Benqiao He,Xiaoping Liang, Recovery of phytosterols from waste residue of Soybean oil deodorizer distillate, Challenges in Environmental Science and Engineering(CESE-2009),Townsville,Australia,14-17 July 2009. (oral) (ISBN978-0-9805-5866-1) p49.

Wenying Shi, Benqiao He, Jianxin Li *, Xiaoping Liang, Feng Yan, Preparation and characterization of the Organic-Inorganic Hybrid Membrane for Biodiesel Production, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(oral)(ISBN978-0- 9805-5866-1) p56.

Rongtao Wang, Xiaoping Liang﹡, Jianxin Li, Benqiao He, Ying Peng, Preparation and Characterization of Mg-Al Hydrotalcite for Biodiesel Synthesis, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(poster)(ISBN978- 0-9805-5866-1) p83.

Yuhe Cao, Feng Yan, Jianxin Li*, Xiaoping Liang,Benqiao He, Used Lubricating Oil Recycling Using a Membrane Filtration: Efficiency, Structural and Composing Analysis, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(poster)(ISBN978- 0-9805-5866-1) p83.

Yaohui Feng, Yuhe Cao, Jianxin Li*，Benqiao He, Feng Yan, Xiaoping Liang, Biodiesel production using cation-exchange resins, Challenges in Environmental Science and Engineering（CESE-2009），Townsville,Australia,14-17 July 2009.(oral)

12. Liang X P, Jin Z G, Bian D C and Su D M,An investigation of the scratch and the corrosion behaviours of sol-gel SiO2 films on glass substrate,16th International Corrosion Congress, Beijing, 19-24, September, 2005(oral)

13. Zhao S H, Liang X P, Jin Z G and Li W D,Comparison of corrosion and wear behaviour of Al2O3coating without and with dispersing aluminium powder in alumina sol,16th International Corrosion Congress,Beijing, 19-24, September, 2005




专利




[1] 梁小平，王光辉，陆青，一种高孔隙率氧化铝多孔陶瓷的制备方法.授权专利号：**7.X，

[2] 梁小平，王化平，王家丹，刘建，任素娥，李冬梅，左蕊，李建新.一种氧化铝／石英玻璃复合纤维的制备方法.专利号：**2.1

[3] 梁小平，王化平，刘建，李冬梅，左蕊，毛新钰，刘凯，李建新.一种氧化铝纤维的溶胶凝胶制备方法.专利号：**4.7

[4] 梁小平，王化平，刘建，李冬梅，左蕊，毛新钰，刘凯，李建新.一种氧化铝-氧化锆复合纤维的溶胶凝胶制备方法.专利号：**2.8

[5] 梁小平，刘建，王化平，任素娥，李冬梅，左蕊，李建新.一种锂离子电池正极材料镍钴锰酸锂LiNixCoyMn1-x-yO2的制备方法.专利号：**6.4

[6] 梁小平，左蕊，王化平，李冬梅，李建新，王虹，何本桥，严峰.一种用于洗发水的防晒保湿剂的制备.专利号：**9.X

[7] 梁小平，任素娥，王化平，刘建，刘磊，李建新，王虹.一种用于酚醛塑料槽筒表面改性的制备方法.专利号：**3.8

[8] 梁小平，任素娥，刘建，王化平，李建新，王虹，何本桥.一种非损伤液氮测定多孔陶瓷材料气孔率的方法.专利号：**0.5

[9]梁小平，任素娥，刘建，王化平，李冬梅，左蕊，李建新，一种可用于高温CO2气体分离的LSCF/碳酸盐双相膜的制备方法,专利号：**8.3

[10] 梁小平，任素娥，刘建，王化平，李建新，王虹，何本桥，一种陶瓷/熔盐双相复合气体分离膜的制备方法，专利号：**7.9

[11] 梁小平，任素娥，刘建，李冬梅，李建新，王虹，何本桥，一种无损多孔陶瓷材料气孔率的液氮测定方法，专利号：**0.5




获奖


1. 2001年 获辽宁省科技进步一等奖

2. 2002年 获天津大学优秀学生干部

3. 2007年 指导本科生获第九届“挑战杯”天津市大学生课外学术科技作品竞赛二等奖

4. 2007年 获天津市教委教改论文优秀奖

5. 2009年 获天津工业大学优秀教师

6. 2010年 获天津工业大学研究生学位论文优秀指导教师

7. 2011年 获天津工业大学第九届学生科技作品竞赛优秀指导教师

8. 2012年 获天津工业大学优秀教师

9. 2013年 获天津市科技进步三等奖



社会兼职 调用标识：{$channel[t_parttime]}}
天津市硅酸盐学会生态环境功能材料专业委员会委员，天津工业大学材料学院工会副主席，天津工业大学教代会代表，天津工业大学党代会代表，Asia-Pacific Journal of Chem. Eng.、西安交通大学学报、金属学报、纺织学报等国内外刊物的审稿人
-->