研究领域或方向
研究方向一：热障涂层
研究方向二：环境障涂层
研究方向三：焊接结构强度
工作经历
2020.02-至今，助理教授，西安交通大学，材料科学与工程学院
教育经历
2012.09-2019.12，博士（硕博连读），西安交通大学，材料科学与工程学院
2008.09-2012.06，学士，佳木斯大学，材料科学与工程学院
学术成果
[1] Wei ZY, Cai HN, Li CJ. Comprehensive dynamic failure mechanism of thermal barrier coatings based on a novel crack propagation and TGO growth coupling model[J]. Ceramics International, 2018, 44 (18): 22556-22566.
[2] Wei ZY, Cai HN, Tahir A, et al. Stress states in plasma-sprayed thermal barrier coatings upon temperature cycling: Combined effects of creep, plastic deformation, and TGO growth[J]. Ceramics International, 2019, 45 (16): 19829-19844.
[3] Wei ZY, Cai HN, Feng RX, et al. The combined effect of creep and TGO growth on the cracking driving force in a plasma-sprayed thermal barrier system[J]. Journal of Thermal Spray Technology, 2019, 28 (5): 1000-1016.
[4] Wei ZY, Cai HN, Feng RX, et al. Dynamic crack growth mechanism and lifetime assessment in plasma sprayed thermal barrier system upon temperature cycling[J]. Ceramics International, 2019, 45 (12): 14896-14907.
[5] Wei ZY, Cheng B, Wang J, et al. Extend the thermal cyclic lifetime of La2Zr2O7/YSZ DCL TBCs by reducing modulus design on a toughening ceramic surface[J]. Surface & Coatings Technology, 2019, 374: 134-143.
[6] Wei ZY, Wang LS, Cai HN, et al. Dominant effect of oriented 2D pores on heat flux in lamellar structured thermal barrier coatings[J]. Ceramics International, 2019, 45 (14): 17029-17039.
[7] Wei ZY, Cai HN. Stress states and crack behavior in plasma sprayed TBCs based on a novel lamellar structure model with real interface morphology[J]. Ceramics International, 2019, 45 (14): 16948-16962.
[8] Wei ZY, Cai HN, Meng GH, et al. An innovative model coupling TGO growth and crack propagation for the failure assessment of lamellar structured thermal barrier coatings[J]. Ceramics International, 2020, 45 (2): 1532-1544.
[9] Wei ZY, Cai HN. Comprehensive effects of TGO growth on the stress characteristic and delamination mechanism in lamellar structured thermal barrier coatings[J]. Ceramics International, 2020, 45 (2): 2220-2237.
[10] Cheng B, Wei ZY, Chen L, et al. Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings[J]. Journal of European Ceramic Society, 2018, 38 (16): 5482-5488.
[11] Wang LS, Wei ZY, Cheng B, et al. Gradient stiffening induced interfacial cracking and strain tolerant design in thermal barrier coatings[J]. Ceramics International, 2020, 45 (2): 2355-2364.
[12] Zhang WW, Wei ZY, Zhang LY, et al. Low-thermal-conductivity thermal barrier coatings with a multi-scale pore design and sintering resistance following thermal exposure[J]. Rare Metals, 2020, DOI: 10.1007/s12598-020-01393-6.
[13] Adnan T, Li GR, Wei ZY, et al. Improving adhesive strength of WC-CoCr coating with novel bimodal roughening substrate: Finite element modeling[J]. Ceramics International, 2020, 46 (8): 10481-10489.