相册


基本信息 The basic information
姓名: 刘郁丽

学院: 材料学院


学历: 博士研究生毕业

学位: 工学博士


职称: 教授

职务:


学科: 材料科学与工程-材料加工工程





工作经历 Work Experience
刘郁丽 教授，博士生导师。 一直从事先进材料精确塑性成形技术及计算机仿真方面的研究工作。1986.7-1988.8在太原科技大学任教，1991年6月至今在西北工业大学材料学院任教。2004年西北工业大学教授，2005年博士生导师。博士学位论文被评为陕西省优秀博士学位论文。曾获西北工业大学优秀青年教师称号。参编高等学校试用教材“冲模图册”（机械工业出版社），担任《中国材料工程大典》《板料冲压成形》篇的主编之一，参与《锻压手册》第2、3版的修订工作。



教育经历 Education Experience
1982.09-1986.07 西安交通大学 机械工程系 塑性成形工艺与设备专业 学士
1988.09-1991.06 西安交通大学 机械工程系 塑性成形工艺与设备专业 硕士
1996.09-2001.04 西北工业大学 材料学院 材料加工成专业 博士



教育教学 Education And Teaching
一直主讲本科生“冲压工艺学”和“材料成形工艺”课程。
主讲硕士生“弹塑性力学”和“材料加工技术”课程。
主讲博士生“金属塑性变形的物理基础”课程。



科学研究 Scientific Research
近年来，主要从事以薄壁异形截面管绕弯精确成形和复杂叶片精锻成形为代表的先进加工工艺理论、建模仿真与优化方面的研究工作。主持国家自然科学基金、高校博士点基金和航空科学基金等项目的研究工作。在国内外重要学术期刊发表学术论文150余篇，其中SCI收录90余篇，EI收录100余篇。



学术文献 Academic Literature
1.抽芯对H96薄壁矩形波导管绕弯成形回弹的影响,2013,21(1),56-61 ,DOI:, ISSN:1005-0299
2.B550CL高强钢轮辐拉深冲孔变形及损伤,2015,22(6),58 ,DOI:, ISSN:1007-2012
3.Deformation behaviors of double-ridged rectangular H96 tube in rotary draw bending under different mandrel types,SPRINGER LONDON LTD,2016,82(9-12),1569-1580 ,DOI:10.1007/s00170-015-7468-5, ISSN:0268-3768
4.Effect of Geometry Parameters on Cross-Sectional Distortion of Thin-Walled Rectangular Tube in Rotary-Draw Bending Process,TRANS TECH PUBLICATIONS LTD,2011,189-193,2784-2787 ,DOI:10.4028/www.scientific.net/AMR.189-193.2784, ISSN:1022-6680
5.Multi-scale Through-process Modeling and Simulation in Precision Forming of Complex Components of Difficult-to-deform Material,AMER INST PHYSICS,2013,1532,150-157 ,DOI:10.1063/1.**, ISSN:0094-243X
6.TC4叶片精锻过程中摩擦对模具应力及温度场的影响,2010,20(z1),452-456 ,DOI:, ISSN:1004-0609
7.叶片精锻三维有限元反向模拟脱模准则的确定,2006,(2),18-23 ,DOI:10.3969/j.issn.1001-196X.2006.02.005, ISSN:1001-196X
8.Experimental study of the deformation laws of hemispherical parts in the compound-forming process,ELSEVIER SCIENCE SA,1998,74(1-3),190-194 ,DOI:10.1016/S0924-0136(97)00267-7, ISSN:0924-0136
9.Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation,ELSEVIER SCIENCE SA,2008,197(1-3),255-260 ,DOI:10.1016/j.jmatprotec.2007.06.031, ISSN:0924-0136
10.Cross-sectional distortion behaviors of thin-walled rectangular tube in rotary-draw bending process,ELSEVIER SCIENCE BV,2010,20(3),484-489 ,DOI:10.1016/S1003-6326(09)60166-7, ISSN:1003-6326
11.Analysis of wrinkling limit of rotary-draw bending process for thin-walled rectangular tube,ELSEVIER SCIENCE SA,2010,210(9),1224-1231 ,DOI:10.1016/j.jmatprotec.2010.03.009, ISSN:0924-0136
12.Effect of clearance on wrinkling of thin-walled rectangular tube in rotary draw bending process,SPRINGER LONDON LTD,2010,50(1-4),85-92 ,DOI:10.1007/s00170-009-2508-7, ISSN:0268-3768
13.Experimental study on cross-section distortion of thin-walled rectangular 3A21 aluminium alloy tube by rotary draw bending,INDERSCIENCE ENTERPRISES LTD,2011,42(1-2),110-120 ,DOI:10.1504/IJMPT.2011.044888, ISSN:0268-1900
14.Development and application of the material constitutive model in springback prediction of cold-bending,ELSEVIER SCI LTD,2012,42,245-258 ,DOI:10.1016/j.matdes.2012.05.043, ISSN:0261-3069
15.Springback Prediction Model Considering the Variable Young's Modulus for the Bending Rectangular 3A21 Tube,SPRINGER,2013,22(1),9-16 ,DOI:10.1007/s11665-012-0227-y, ISSN:1059-9495
16.Improvement of the accuracy and the computational efficiency of the springback prediction model for the rotary-draw bending of rectangular H96 tube,PERGAMON-ELSEVIER SCIENCE LTD,2013,66,224-232 ,DOI:10.1016/j.ijmecsci.2012.11.012, ISSN:0020-7403
17.Springback prediction for rotary-draw bending of rectangular H96 tube based on isotropic, mixed and Yoshida-Uemori two-surface hardening models,ELSEVIER SCI LTD,2013,47,200-209 ,DOI:10.1016/j.matdes.2012.12.018, ISSN:0261-3069
18.Relations between the stress components and cross-sectional distortion of thin-walled rectangular waveguide tube in rotary draw bending process,SPRINGER LONDON LTD,2013,68(1-4),651-662 ,DOI:10.1007/s00170-013-4786-3, ISSN:0268-3768
19.Experimental study on the effect of dies on wall thickness distribution in NC bending of thin-walled rectangular 3A21 aluminum alloy tube,SPRINGER LONDON LTD,2013,68(5-8),1867-1874 ,DOI:10.1007/s00170-013-4983-0, ISSN:0268-3768
20.An analytical model for the collapsing deformation of thin-walled rectangular tube in rotary draw bending,SPRINGER LONDON LTD,2013,69(1-4),627-636 ,DOI:10.1007/s00170-013-5042-6, ISSN:0268-3768
21.Comparison between the effects of PVC mandrel and mandrel-cores die on the forming quality of bending rectangular H96 tube,PERGAMON-ELSEVIER SCIENCE LTD,2013,76,132-143 ,DOI:10.1016/j.ijmecsci.2013.09.011, ISSN:0020-7403
22.Prediction of forming limit based on cross-sectional distortion for rotary draw bending of H96 brass double-ridged rectangular tube,SPRINGER LONDON LTD,2014,71(5-8),1445-1454 ,DOI:10.1007/s00170-013-5552-2, ISSN:0268-3768
23.Experimental and FE Simulation Study on Cross-Section Distortion of Rectangular Tube under Multi-Die Constraints in Rotary Draw Bending Process,KOREAN SOC PRECISION ENG,2014,15(4),633-641 ,DOI:10.1007/s12541-014-0381-2, ISSN:2234-7593
24.Research on cross-sectional deformation of double-ridged rectangular tube during H-typed rotary draw bending process,SPRINGER LONDON LTD,2014,73(9-12),1789-1798 ,DOI:10.1007/s00170-014-5968-3, ISSN:0268-3768
25.Global sensitivity analysis and coupling effects of forming parameters on wall thinning and cross-sectional distortion of rotary draw bending of thin-walled rectangular tube with small bending radius,SPRINGER LONDON LTD,2014,74(5-8),581-589 ,DOI:10.1007/s00170-014-6014-1, ISSN:0268-3768
26.Effect of mandrel-cores on springback and sectional deformation of rectangular H96 tube NC bending,SPRINGER LONDON LTD,2015,78(1-4),351-360 ,DOI:10.1007/s00170-014-6657-y, ISSN:0268-3768
27.Optimal design of process parameters of rotary-draw bending process for thin-walled rectangular tube of aluminum alloy,SAGE PUBLICATIONS LTD,2014,228(11),1442-1448 ,DOI:10.1177/8518, ISSN:0954-4054
28.H96黄铜双脊矩形管绕弯应力演变规律,2015,(10),1209-1212,1224 ,DOI:, ISSN:2095-2783
29.Effects of geometrical parameters on wrinkling of thin-walled rectangular aluminum alloy wave-guide tubes in rotary-draw bending,ELSEVIER SCIENCE INC,2013,26(1),242-248 ,DOI:10.1016/j.cja.2012.12.003, ISSN:1000-9361
30.采用Bézier曲面生成叶片锻造三维有限元模拟的模具网格,2000,18(1),87-89 ,DOI:10.3969/j.issn.1000-2758.2000.01.021, ISSN:1000-2758
31.工艺参数对薄壁矩形管绕弯成形失稳起皱影响的显著性分析,2010,39(13),77-80 ,DOI:10.3969/j.issn.1001-3814.2010.13.026, ISSN:1001-3814
32.带阻尼台叶片精锻过程卸载冷却对形状偏差的影响,2011,30(12),2111-2115 ,DOI:, ISSN:1003-8728
33.铝合金薄壁矩形管绕弯成形起皱极限的预测,2011,34(1),47-52 ,DOI:, ISSN:1000-582X
34.H96黄铜薄壁矩形管绕弯回弹和截面畸变对工艺参数的敏感性,2012,22(9),2233-2240 ,DOI:, ISSN:1003-6326
35.H96黄铜双脊矩形波导管绕弯截面变形特征研究,2013,33(6),13-19 ,DOI:10.3969/j.issn.1005-5053.2013.6.003, ISSN:1005-5053
36.单榫头叶片锻造过程应力应变场的三维有限元分析,2002,20(1),137-140 ,DOI:10.3969/j.issn.1000-2758.2002.01.033, ISSN:1000-2758
37.叶片精锻三维刚粘塑性有限元模拟系统的研究,2003,21(1),106-109 ,DOI:10.3969/j.issn.1000-2758.2003.01.027, ISSN:1000-2758
38.单榫头叶片锻造过程成形缺陷分析,2003,22(2),283-284,288 ,DOI:10.3321/j.issn:1003-8728.2003.02.037, ISSN:1003-8728
39.带阻尼台叶片多向模锻过程场量分布规律研究,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(2),159-163 ,DOI:, ISSN:1005-0299
40.Research on distribution laws of wall thickness of aluminum alloy thin-walled rectangular tube in rotary-draw bending process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(SUPPL. 1),1-4 ,DOI:, ISSN:**
41.单榫头叶片叶身精锻成形规律,Editorial Office of Chinese Journal of Mechanical Engineering,2002,38(6),111-114 ,DOI:10.3321/j.issn:0577-6686.2002.06.024, ISSN:0577-6686
42.摩擦对叶片精锻预成形毛坯放置位置影响规律的研究,Editorial Office of Chinese Journal of Mechanical Engineering,2003,39(1),97-100 ,DOI:10.3321/j.issn:0577-6686.2003.01.021, ISSN:0577-6686
43.芯棒对铝合金矩形管绕弯回弹作用的数值模拟,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(1),38-43 ,DOI:, ISSN:1005-0299
44.芯模参数对3A21矩形管绕弯截面变形的影响研究,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(6),97-102 ,DOI:, ISSN:1005-0299
45.间隙对薄壁矩形管绕弯成形截面畸变影响的研究,China Mechanical Engineering Magazine Office, Wuchang, 430070, China,2008,19(16),1972-1975 ,DOI:10.3321/j.issn:1004-132X.2008.16.019, ISSN:1004-132X
46.金属塑性成形三维有限元模拟过程中修正触模节点位置的一种新方法,Beijing Res Inst Mech Electr Technol, Beijing, China,2000,7(2),62-65 ,DOI:10.3969/j.issn.1007-2012.2000.02.017, ISSN:1007-2012
47.压块对H96矩形管绕弯成形回弹与截面变形的作用,Central South University of Technology,2014,24(1),104-114 ,DOI:, ISSN:1004-0609
48.基于多场耦合分析的TC4叶片精锻成形的微观组织模拟,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(4),64-68 ,DOI:10.3969/j.issn.1007-2012.2007.04.014, ISSN:1007-2012
49.薄壁矩形管弯曲过程截面畸变的三维有限元分析,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(3),72-75 ,DOI:10.3969/j.issn.1007-2012.2007.03.018, ISSN:1007-2012
50.上模压下速度对带阻尼台叶片精锻影响的研究,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2007,15(6),792-796 ,DOI:10.3969/j.issn.1005-0299.2007.06.014, ISSN:1005-0299
51.材料参数对3A21矩形管弯曲回弹的敏感性分析,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2011,19(5),1-5 ,DOI:, ISSN:1005-0299
52.H96黄铜薄壁矩形管绕弯回弹和截面畸变对工艺参数的敏感性,ELSEVIER SCIENCE BV,2012,22(9),2233-2240 ,DOI:10.1016/S1003-6326(11)61454-4, ISSN:1003-6326
53.Research on precision forging law of complicated blade by using 3D FE simulation and physical modeling,TRANS TECH PUBLICATIONS LTD,2004,471-472,839-843 ,DOI:, ISSN:0255-5476
54.B550CL高强钢轮辐反拉深-翻边复合成形损伤开裂研究,2014,,119-123 ,DOI:, ISSN:
55.铝合金薄壁矩形管绕弯成形壁厚分布规律研究,2010,,1-4 ,DOI:, ISSN:
56.Wrinkling limit prediction of rotary-draw bending process for thin-walled rectangular aluminum alloy tube,Editorial Board of Journal of Chongqing University, 174 Shazhengjie, Shapingba District, Chongqing, 400030, China,2011,34(1),47-52 ,DOI:, ISSN:**X
57.Effects of process parameters on the temperature field in Ti-6Al-4V alloy blade precision forging process,Chinese Society of Metals,2006,22(4),473-477 ,DOI:, ISSN:**
58.3-D FEM analysis of section distortion in bending process of the thin-walled rectangular tube,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(3),72-75 ,DOI:, ISSN:**
59.Microstructure simulation of TC4 blade precision forging process based on multiple field coupling analysis,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(4),64-68 ,DOI:, ISSN:**
60.Influence of the upper die velocity on the precision forging process of the blade with a damper platform,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2007,15(6),792-796 ,DOI:, ISSN:**
61.Sensitivity analysis of material parameters on spring-back of 3A21 aluminum alloy rectangular tube in the bending process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2011,19(5),1-5 ,DOI:, ISSN:**
62.Establishment of springback prediction model for the rotary-draw bending of thin-walled rectangular tube considering variation of young?s modulus,World Scientific Publishing Co. Pte. Ltd, 5 Toh Tuck Link, Singapore, 596224, Singapore,2011,,188-194 ,DOI:, ISSN:45
63.轻量化材料与构件精确塑性成形先进技术研究进展,2008,,835-841 ,DOI:, ISSN:
64.有限元反向模拟的新算法,2006,,1981-1984 ,DOI:, ISSN:
65.芯棒伸出量对薄壁矩形管弯曲失稳起皱影响的数值模拟,2006,,35-37,66 ,DOI:, ISSN:
66.TC4合金带阻尼台叶片精锻过程微观组织演变规律,2008,,339-342 ,DOI:, ISSN:
67.基于有限元数值模拟的叶片精锻工艺参数优化,0,,208-211 ,DOI:, ISSN:
68.薄壁矩形管弯曲过程截面畸变的三维有限元分析,2006,,140-143 ,DOI:, ISSN:
69.A new method to accurately describe cross-section distortion in rotary draw bending process of thin-walled rectangular tube,Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany,2012,117-119,1839-1842 ,DOI:10.4028/www.scientific.net/AMM.117-119.1839, ISSN:04
70.Influence of friction on cross-sectional distortion in rotary draw bending process of thin-walled rectangular tube,Hanrimwon Publishing Co., 206-3 Ojang-dong, Jung-gu,, Seoul, 100-310, Korea, Republic of,2008,,1034-1040 ,DOI:, ISSN:25
71.Visualization method of 3D finite element simulation based on AutoCAD,Sci Publ House,1999,(6),9-11, 27 ,DOI:, ISSN:**X
72.Field-variable distribution laws of the blade with a damper platform during multi-directional forging process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(2),159-163 ,DOI:, ISSN:**
73.Advances in control of unequal deformation by locally loading and theories related to precision plastic forming,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(2),6-14 ,DOI:, ISSN:**
74.Influence of loading mode on the multi-directional forging of the blade with a damper platform,Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China,2012,1,346-349 ,DOI:, ISSN:90
75.TC4叶片精锻过程中摩擦对模具应力及温度场的影响,2010,,452-456 ,DOI:, ISSN:
76.Research on distribution laws of wall thickness of aluminum alloy thin-walled rectangular tube in rotary-draw bending process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(SUPPL. 1),1-4 ,DOI:, ISSN:**
77.Impact of pressure die on springback and section deformation of rotary-draw bending of rectangular H96 tube,Central South University of Technology,2014,24(1),104-114 ,DOI:, ISSN:**
78.New method of modifying the node touching on the die during 3-D FEM simulation of the metal plastic forming,Beijing Res Inst Mech Electr Technol, Beijing, China,2000,7(2),62-65 ,DOI:, ISSN:**
79.Research on the influence of friction on setting position of preform billet in precision forging process of blade,Editorial Office of Chinese Journal of Mechanical Engineering,2003,39(1),97-100 ,DOI:, ISSN:**
80.Forming laws of blade body in precision forging process of blade with a tenon,Editorial Office of Chinese Journal of Mechanical Engineering,2002,38(6),111-114 ,DOI:, ISSN:**
81.On improving visualization of forging process with 3D FEM mesh,NPU, Xi''an, China,1998,16(4),641-644 ,DOI:, ISSN:**
82.CAD of blade forging die,1998,10(5),446-449 ,DOI:, ISSN:**
83.General software for pre-processing of three-dimensional FEM,1998,17(2),323-324, 328 ,DOI:, ISSN:**
84.Effect of clearance on cross section distortion of thin-walled rectangular tube in rotary draw bending process,China Mechanical Engineering Magazine Office, Wuchang, 430070, China,2008,19(16),1972-1975 ,DOI:, ISSN:**X
85.Influence of mandrel parameters on cross-section deformation of 3A21 rectangular tube in rotary-draw bending process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(6),97-102 ,DOI:, ISSN:**
86.Prediction of grain size for blade precision forging process under thermo-mechanical coupling,Chinese Society of Metals,2003,19(SUPPL.),156-158 ,DOI:, ISSN:**
87.Method of obtaining deformation information by tracing deformation from sections for 3D FE simulation,Chinese Society of Metals,2003,19(SUPPL.),65-68 ,DOI:, ISSN:**
88.Numerical simulation of effects of mandrel on spring-back of aluminum alloy rectangular tube in rotary-draw bending process,Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(1),38-43 ,DOI:, ISSN:**
89.Development of 3D FE simulation system 3D-PFS for metal plastic forming process,Harbin Institute of Technology,2005,13(4),402-406 ,DOI:, ISSN:**
90.Novel algorithm for backward simulation using FEM,China Mechanical Engineering Magazine Office, Wuchang, China,2006,17(19),1981-1983 ,DOI:, ISSN:**X
91.Research on influence of temperature on a precision forging process of blade with a tenon,Chinese Academy of Sciences,2005,18(6),749-755 ,DOI:, ISSN:**
92.不同材料芯模对双脊矩形管绕弯截面变形的影响,2013,,439-442 ,DOI:, ISSN:
93.单榫头叶片精锻过程温度场的三维热力耦合有限元模拟,2002,,435-439 ,DOI:, ISSN:
94.Wrinkling limit prediction of rotary-draw bending process for thin-walled rectangular aluminum alloy tube,Editorial Board of Journal of Chongqing University, 174 Shazhengjie, Shapingba District, Chongqing, 400030, China,2011,34(1),47-52 ,DOI:, ISSN:
95.Numerical simulation of influence of mandrel on wrinkling in bending of thin-walled rectangular tube,China Mechanical Engineering Magazine Office, Wuchang, China,2006,17(SUPPL.),35-37 ,DOI:, ISSN:**X
96.Impact of pressure die on springback and section deformation of rotary-draw bending of rectangular H96 tube,Central South University of Technology,2014,24(1),104-114 ,DOI:, ISSN:
97.A study on mandrel role in rotary draw bending of rectangular tube,INDERSCIENCE ENTERPRISES LTD,2015,50(1),65-79 ,DOI:10.1504/IJMPT.2015.066867, ISSN:0268-1900
98.H96薄壁矩形管绕弯回弹过程的应力应变分析,2011,,119-122 ,DOI:, ISSN:
99.Implementation of 3d backward simulation for preform design with uniform deformation in net-shape forging of blade of titanium alloy,Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2012,41(4),640-644 ,DOI:, ISSN:**X
100.Influence of processing parameters on microstructure evolution during blade precision forging process of titanium alloy,Rare Metals Materials and Engineering Press, Xi''an, China,2005,34(5),781-785 ,DOI:, ISSN:**X
101.Investigation in 3D-CTM software for simulating precision forging process of aero-engine blade,Shanghai Jiao Tong University,2005,39(1),1-5 ,DOI:, ISSN:**
102.Deformation characteristic of the precision forging of a blade with a damper platform using 3D FEM analysis,ELSEVIER SCIENCE SA,2004,150(3),290-299 ,DOI:10.1016/j.matprotec.2004.02.062, ISSN:0924-0136
103.A method of obtaining deformation information by tracing deformation from sections for 3D FE simulation,JOURNAL MATER SCI TECHNOL,2003,19,65-68 ,DOI:, ISSN:1005-0302
104.Prediction of grain size for blade precision forging process under thermo-mechanical coupling,JOURNAL MATER SCI TECHNOL,2003,19,156-158 ,DOI:, ISSN:1005-0302
105.A study of the influence of the friction conditions on the forging process of a blade with a tenon,ELSEVIER SCIENCE SA,2002,123(1),42-46 ,DOI:10.1016/S0924-0136(02)00042-0, ISSN:0924-0136
106.A 3D rigid-viscoplastic FEM simulation of the isothermal precision forging of a blade with a damper platform,ELSEVIER SCIENCE SA,2002,122(1),45-50 ,DOI:10.1016/S0924-0136(02)00032-8, ISSN:0924-0136
107.A 3D rigid-viscoplastic FEM simulation of compressor blade isothermal forging,ELSEVIER SCIENCE SA,2001,117(1-2),56-61 ,DOI:10.1016/S0924-0136(01)01111-6, ISSN:0924-0136
108.Physical modeling of the forging of a blade with a zdamper platform using plasticine,ELSEVIER SCIENCE SA,2001,117(1-2),62-65 ,DOI:10.1016/S0924-0136(01)01109-8, ISSN:0924-0136
109.A coordination model of the in-plane bending of strip metal under unequal compression,ELSEVIER SCIENCE SA,2001,114(2),103-108 ,DOI:10.1016/S0924-0136(01)00739-7, ISSN:0924-0136
110.Experimental study of the tube axial compression forming process with free dieless deformation,ELSEVIER SCIENCE SA,2000,105(1-2),191-195 ,DOI:, ISSN:0924-0136
111.Physical modeling of blade forging,ELSEVIER SCIENCE SA,2000,99(1-3),141-144 ,DOI:10.1016/S0924-0136(99)00406-9, ISSN:0924-0136
112.Research on a new remeshing method for the 3D FEM simulation of blade forging,ELSEVIER SCIENCE SA,1999,94(2-3),231-234 ,DOI:10.1016/S0924-0136(99)00100-4, ISSN:0924-0136
113.SUPERPLASTIC DEFORMATION OF DURALUMIN LY12CZ UNDER AN ELECTRIC-FIELD,ELSEVIER SCIENCE SA LAUSANNE,1994,40(3-4),385-393 ,DOI:10.1016/0924-0136(94)90463-4, ISSN:0924-0136
114.金属塑性成形三维有限元模拟软件3D - PFS的开发,Harbin Institute of Technology,2005,13(4),402-406 ,DOI:10.3969/j.issn.1005-0299.2005.04.019, ISSN:1005-0299
115.复杂变形过程刚粘塑性有限元模拟的快速算法,2003,21(2),148-151 ,DOI:10.3969/j.issn.1000-2758.2003.02.007, ISSN:1000-2758
116.波前法在大型塑性成形有限元模拟中的应用,2002,20(4),620-624 ,DOI:10.3969/j.issn.1000-2758.2002.04.025, ISSN:1000-2758
117.H96薄壁矩形管绕弯回弹过程的应力应变分析,2012,37(1),146-149 ,DOI:10.3969/j.issn.1000-3940.2012.01.036, ISSN:1000-3940
118.铝合金薄壁矩形管绕弯成形起皱极限的预测,Editorial Board of Journal of Chongqing University, 174 Shazhengjie, Shapingba District, Chongqing, 400030, China,2011,34(1),47-52 ,DOI:, ISSN:1000-582X
119.薄壁管轴压精密成形过程中的无模约束自由变形特征,2000,18(4),653-656 ,DOI:10.3969/j.issn.1000-2758.2000.04.035, ISSN:1000-2758
120.局部加载控制不均匀变形与精确塑性成形研究进展 ,Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(2),6-14 ,DOI:, ISSN:1007-2012
121.材料参数对矩形管绕弯截面变形的影响,2009,38(13),1-4,7 ,DOI:10.3969/j.issn.1001-3814.2009.13.001, ISSN:1001-3814
122.有限元反向模拟的新算法,China Mechanical Engineering Magazine Office, Wuchang, China,2006,17(19),1981-1984 ,DOI:10.3321/j.issn:1004-132X.2006.19.001, ISSN:1004-132X
123.叶片精锻过程数值模拟结果动态彩色云图的实现方法,2005,24(9),1131-1134 ,DOI:10.3321/j.issn:1003-8728.2005.09.032, ISSN:1003-8728
124.热锻成形过程微观组织模拟技术的研究现状,2005,24(5),533-535 ,DOI:10.3321/j.issn:1003-8728.2005.05.008, ISSN:1003-8728
125.单榫头叶片精锻三维热力耦合有限元模拟,2005,24(2),135-138 ,DOI:10.3321/j.issn:1003-8728.2005.02.003, ISSN:1003-8728
126.塑性成形过程反向模拟技术的研究现状与发展趋势,2004,23(10),1219-1222 ,DOI:10.3321/j.issn:1003-8728.2004.10.026, ISSN:1003-8728
127.带阻尼台叶片精锻过程温度场分布规律研究,2007,(5),25-29 ,DOI:10.3969/j.issn.1001-196X.2007.05.007, ISSN:1001-196X
128.带阻尼台叶片多向模锻过程温度分布研究,2010,02(4),48-51 ,DOI:10.3969/j.issn.1674-6457.2010.04.011, ISSN:1674-6457
129.单榫头叶片精锻成形规律三维热力耦合有限元模拟研究,2005,(2),55-58 ,DOI:10.3969/j.issn.1001-196X.2005.02.016, ISSN:1001-196X
130.一种具有友好用户界面的专用有限元软件的开发方法,2001,37(3),121-123 ,DOI:10.3321/j.issn:1002-8331.2001.03.041, ISSN:1002-8331
131.On unequal plastic deformation and new precision forming technologies,HARBIN INSTITUTE TECHNOLOGY PUBLISHERS,2004,,179-184 ,DOI:, ISSN:
132.叶片精锻成形规律的三维有限元分析,2001, ,DOI:, ISSN:
133.硬铝LY12CZ在强电场中超塑变形时的最佳条件,1994,12(2),149 ,DOI:, ISSN:1000-2758
134.钛合金压气机盘等温锻模具的有限元分析及优化设计,1995,(中国北京),4 ,DOI:, ISSN:
135.适用于三维有限元网格显示的逐步消隐法,NPU, Xi'an, China,1998,16(4),641 ,DOI:, ISSN:1000-2758
136.三维有限元模拟等值线生成的新方法,2000,(01),38-40 ,DOI:, ISSN:61-1113/TH
137.航空叶片的精锻工艺与模拟技术,1999,(06),1-3+8 ,DOI:, ISSN:1001-196X
138.一种基于AutoCAD的三维有限元模拟可视化方法,Sci Publ House,1999,(06),9-11+27 ,DOI:, ISSN:1001-196X
139.芯棒伸出量对薄壁矩形管弯曲失稳起皱影响的数值模拟,2006,(S1),35-37+66 ,DOI:, ISSN:1004-132X
140.一种用于双脊矩形管绕弯成形的柔性叉形芯模,2014, ,DOI:, ISSN:
141.一种新型高强钢轮辐拉深冲孔复合工序的数值模拟方法,2014, ,DOI:, ISSN:
142.薄壁矩形管复合绕弯成形模具,2014, ,DOI:, ISSN:
143.H96黄铜薄壁矩形管绕弯回弹和截面畸变对工艺参数的敏感性(英文),ELSEVIER SCIENCE BV,2012,22(09),2233-2240 ,DOI:10.1016/S1003-6326(11)61454-4, ISSN:1003-6326
144.一种弯曲柔性芯模,2012, ,DOI:, ISSN:
145.一种用于薄壁矩形管弯曲的柔性芯模,2012, ,DOI:, ISSN:
146.Some advanced plastic processing technologies and their numerical simulation,ELSEVIER SCIENCE SA,2004,151(1-3),63-69 ,DOI:10.1016/j.jmatprotec.2004.04.015, ISSN:0924-0136
147.一种用于薄壁矩形管绕弯成形的整体式柔性芯模,2015, ,DOI:, ISSN:
148.Plastic Deformation Characteristics Analysis in Rotary-draw Bending Process of Thin-walled Rectangular Tube,TRANS TECH PUBLICATIONS LTD,2010,97-101,320-323 ,DOI:10.4028/www.scientific.net/AMR.97-101.320, ISSN:1022-6680
149.Experimental Research on Strain Distribution Characteristics of Thin-walled Rectangular Tube in Rotary-draw Bending,TRANS TECH PUBLICATIONS LTD,2011,139-141,502-505 ,DOI:10.4028/www.scientific.net/AMR.139-141.502, ISSN:1022-6680
150.Side Wrinkling Characteristics in Rotary-Draw Bending Process of Thin-walled Rectangular 3A21 Tube,TRANS TECH PUBLICATIONS LTD,2012,697-698,356-360 ,DOI:10.4028/www.scientific.net/MSF.697-698.356, ISSN:0255-5476
151.Influence of preformed billet on the multi-directional forging of the blade with a damper platform,World Scientific Publishing Co. Pte. Ltd, 5 Toh Tuck Link, Singapore, 596224, Singapore,2011,,336-341 ,DOI:, ISSN:45
152.Three-dimensional finite-elements modeling and simulation of rotary-draw bending process for thin-walled rectangular tube,ELSEVIER SCIENCE SA,2009,499(1-2),257-261 ,DOI:10.1016/j.msea.2007.11.127, ISSN:0921-5093
153.Effects of friction on precision forging process of blade with a damper platform,TRANS TECH PUBLICATIONS LTD,2007,561-565(PART 2),831-834 ,DOI:, ISSN:0255-5476
154.Analysis of splitting spinning force by the principal stress method,ELSEVIER SCIENCE SA,2008,201(1-3),267-272 ,DOI:10.1016/j.jmatprotec.2007.11.181, ISSN:0924-0136
155.面向钛合金叶片精锻变形均匀预成形设计的三维有限元反向模拟,NORTHWEST INST NONFERROUS METAL RESEARCH,2012,41(4),640-644 ,DOI:10.3969/j.issn.1002-185X.2012.04.017, ISSN:1002-185X
156.Effects of process parameters on the temperature field in Ti-6Al-4V alloy blade precision forging process,JOURNAL MATER SCI TECHNOL,2006,22(4),473-477 ,DOI:, ISSN:1005-0302
157.Backward tracing simulation of precision forging process for blade based on 3D FEM,ALLERTON PRESS INC,2006,16(,1),S639-S644 ,DOI:10.1016/S1003-6326(06)60269-0, ISSN:1003-6326
158.工艺参数对钛合金叶片精锻中微观组织的影响,NORTHWEST INST NONFERROUS METAL RESEARCH,2005,34(5),781-785 ,DOI:10.3321/j.issn:1002-185X.2005.05.028, ISSN:1002-185X
159.基于有限元数值模拟的叶片精锻工艺参数优化,2005,(中国太原),208-211 ,DOI:, ISSN:
160.叶片精锻三维刚粘塑性热力耦合有限元模拟系统,Shanghai Jiao Tong University,2005,39(1),1-5 ,DOI:10.3321/j.issn:1006-2467.2005.01.001, ISSN:1006-2467
161.芯模对双脊矩形管绕弯成形截面畸变的影响,2014,22(3),46-53 ,DOI:, ISSN:1005-0299
162.不同圆角过渡的3A21铝合金矩形管弯曲壁厚变化与损伤研究,2013,33(2),66-73 ,DOI:10.3969/j.issn.1005-5053.2013.2.012, ISSN:1005-5053
163.Some advances in plastic forming technologies of titanium alloys,ELSEVIER SCIENCE BV,2014,81,44-53 ,DOI:10.1016/j.proeng.2014.09.127, ISSN:1877-7058
164.B550CL高强钢轮辐反拉深-翻边复合成形损伤开裂研究,2015,23(3),71-75 ,DOI:10.11951/j.issn.1005-0299.**, ISSN:1005-0299
165.模具约束条件对H96黄铜双脊矩形管E弯截面变形的影响,AAAS Press of Chinese Society of Aeronautics and Astronautics,2015,36(4),1320-1329 ,DOI:10.7527/S1000-6893.2014.0113, ISSN:1000-6893
166.面向叶片精锻过程的三维有限元模拟,1999,(S1),87-90+95 ,DOI:, ISSN:1005-0299
167.单榫头叶片精锻过程温度场的三维热力耦合有限元模拟,2002,(中国北京),435-439 ,DOI:, ISSN:
168.TC4叶片精锻过程中摩擦对模具应力及温度场的影响,2010,(中国上海),452-456 ,DOI:, ISSN:
169.H96薄壁矩形管绕弯回弹过程的应力应变分析,2011,(中国重庆),119-122 ,DOI:, ISSN:



English Version