我的相册




基本信息 The basic information
姓名: 杨艳慧

学院: 材料学院


学历: 博士研究生毕业

学位: 博士


职称: 副教授

职务:


学科: 材料科学与工程-材料加工工程


邮箱: yangyh@nwpu.edu.cn








我的相册


工作经历 Work Experience
2017-05至今, 西北工业大学, 材料学院, 副教授
2017-11至2018-10, 英国 帝国理工学院, 访问****
2011-01至2017-04, 西北工业大学, 材料学院, 讲师







我的相册


教育经历 Education Experience
1998-2002，西安建筑科技大学，金属压力加工，学士
2003-2006，西北工业大学，材料加工工程，硕士
2005-2010，西北工业大学，材料加工工程，博士





我的相册


荣誉获奖 Awards Information
2019.12，获国家科学技术进步二等奖
2013.12，获省部级科技进步一等奖
2011.12，获无锡市科技进步一等奖










我的相册


科学研究 Scientific Research
(1)残余应力精确计量及调控技术
(2)超细晶/纳米晶大尺寸块体材料制备
(3)难变形材料塑性变形组织均匀性调控、工艺设计及参数优化
(4)粉末高温合金热成形过程非金属夹杂控制技术







我的相册


学术成果 Academic Achievements
发表论文共41篇，已授权专利23项，软件著作权2项，航空标准1项。







我的相册


学术文献 Academic Literature
1.GH4169合金非均匀组织在加热过程中的演化机理,Chinese Academy of Sciences,2016,52(6),707-716 ,DOI:10.11900/0412.1961.2015.00551, ISSN:0412-1961
2.Optimization on cooperative feed strategy for radial-axial ring rolling process of Inco718 alloy by RSM and FEM,Chinese Journal of Aeronautics,2016,29(3),831-842 ,DOI:10.1016/j.cja.2016.03.001, ISSN:**
3.Effects of blank dimension on forming characteristics during conical-section ring rolling of Inco718 alloy,Springer-Verlag London Ltd,2016,84(9-12),2707-2718 ,DOI:10.1007/s00170-015-7839-y, ISSN:**
4.Effect of Grain Size Distribution on Processing Maps for Isothermal Compression of Inconel 718 Superalloy,Springer New York LLC,2016,25(2),677-686 ,DOI:10.1007/s11665-016-1887-9, ISSN:**
5.Characterization of hot deformation behavior of Udimet720Li superalloy using processing map,TRANS TECH PUBLICATIONS LTD,2014,887-888,1161-1168 ,DOI:10.4028/www.scientific.net/AMR.887-888.1161, ISSN:1022-6680
6.用有限元法预测大型整体锻件中流线分布,2012,(3),111-116 ,DOI:10.3969/j.issn.1001-196X.2012.03.025, ISSN:1001-196X
7.GH738合金在不同变形条件下的再结晶过程,2012,(3),103-107 ,DOI:10.3969/j.issn.1001-196X.2012.03.023, ISSN:1001-196X
8.Influence of cooling conditions in casting Cu-Ni alloy based on numerical simulation,JOURNAL WUHAN UNIV TECHNOLOGY,2010,25(1),68-72 ,DOI:10.1007/s11595-010-1068-x, ISSN:1000-2413
9.应用基于FEM和响应面法预成形设计提高航空锻件变形均匀性(英文),ELSEVIER SCIENCE INC,2010,23(02),260-267 ,DOI:10.1016/S1000-9361(09)60214-4, ISSN:1000-9361
10.TC11钛合金的流变行为及其半经验本构模型,2015,(22),2648-2652 ,DOI:10.3969/j.issn.2095-2783.2015.22.015, ISSN:2095-2783
11.GH706合金流变曲线特性及本构关系,2013,42(20),1-5 ,DOI:, ISSN:1001-3814
12.铸态GH706合金的热变形行为研究,2015,40(9),117-124 ,DOI:10.13330/j.issn.1000-3940.2015.09.023, ISSN:1000-3940
13.应用基于Taguchi方法建立的损失函数评价TC11整体叶盘锻件内组织均匀性,NORTHWEST INST NONFERROUS METAL RESEARCH,2011,40(4),565-570 ,DOI:, ISSN:1002-185X
14.对击锤上GH4169合金盘件锻造过程数值模拟,2011,40(17),102-105 ,DOI:10.3969/j.issn.1001-3814.2011.17.033, ISSN:1001-3814
15.TC11钛合金整体叶盘锻件组织均匀性评价方法,Chinese Journal of Aeronautics, 37 Xueyuan Road, Beijing, 100191, China,2012,32(1),25-29 ,DOI:10.3969/j.issn.1005-5053.2012.1.006, ISSN:1005-5053
16.FGH96合金包覆挤压过程数值模拟,2013,33(1),21-27 ,DOI:10.3969/j.issn.1005-5053.2013.1.004, ISSN:1005-5053
17.基于热加工图的钛合金整体叶盘锻造工艺优化方法,2013,42(13),71-75 ,DOI:, ISSN:1001-3814
18.GH_4169合金加热过程中delta 相形态和晶粒尺寸的演化规律,2013,42(24),114 ,DOI:, ISSN:1001-3814
19.GH4169合金、TC4合金环件残余应力的测试,2014,43(24),47-49 ,DOI:, ISSN:1001-3814
20.等温锻造过程中Ti-1023合金的本构关系,2005,0(6),1-3 ,DOI:, ISSN:1001-3814
21.离合器式螺旋压力机打击特性和锻造过程数值模拟,AAAS Press of Chinese Society of Aeronautics and, P.O. Box 399, Beijing, China,2009,30(7),1346-1352 ,DOI:10.3321/j.issn:1000-6893.2009.07.027, ISSN:1000-6893
22.应用基于FEM的预成形最优化方法提高锻件变形均匀性,AAAS Press of Chinese Society of Aeronautics and Astronautics,2005,26(6),764-767 ,DOI:10.3321/j.issn:1000-6893.2005.06.021, ISSN:1000-6893
23.Working characteristics and numerical simulation of forging process for clutch screw press,AAAS Press of Chinese Society of Aeronautics and, P.O. Box 399, Beijing, China,2009,30(7),1346-1352 ,DOI:, ISSN:**
24.Multi-objective preform optimization using RSM,Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2009,38(6),1019-1024 ,DOI:, ISSN:**X
25.A method optimizing the forging process of Titanium alloy blisk based on the processing map,Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland,2014,904,262-268 ,DOI:10.4028/www.scientific.net/AMR.904.262, ISSN:60
26.Effects of the cooling rate on the solidification microstructure of Cu-Ni alloy,Trans Tech Publications Ltd, Laubisrutistr.24, Stafa-Zuerich, CH-8712, Switzerland,2010,658,444-447 ,DOI:10.4028/www.scientific.net/MSF.658.444, ISSN:42
27.Microstructure homogeneity evaluation for TC11 blisk forging using loss function based on Taguchi method,Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2011,40(4),565-570 ,DOI:, ISSN:**X
28.Constitutive Relationship of IN718 Alloy for Thermoviscoplastic and Microstructure Evolution Coupled Analysis,Chinese Academy of Sciences, 72 Wenhua Road, Shenyang, 110015, China,2007,20(5),373-379 ,DOI:10.1016/S1006-7191(07)60052-0, ISSN:**
29.Improving the deformation uniformity within forgings by applying preformed optimization based on FEM,AAAS Press of Chinese Society of Aeronautics and Astronautics,2005,26(6),764-767 ,DOI:, ISSN:**
30.Study on hot deformation behavior of cast-and-homogenized superalloy GH706,Trans Tech Publications Ltd,2015,816,648-654 ,DOI:10.4028/www.scientific.net/MSF.816.648, ISSN:59
31.钛合金叶片精锻工艺的RSM优化方法,2009,38(15),80-84 ,DOI:10.3969/j.issn.1001-3814.2009.15.025, ISSN:1001-3814
32.一种钢质多孔复合棒材制备方法,2014, ,DOI:, ISSN:
33.复杂框梁整体成形的坯料设计与评价方法,2014,43(23),123-127 ,DOI:, ISSN:1001-3814
34.一种大高径比斜L形环件的生产方法,2015, ,DOI:, ISSN:
35.一种非对称模具及脱模方法,2015, ,DOI:, ISSN:
36.GH4169合金锻件晶粒度分析及预测方法,2015, ,DOI:, ISSN:
37.GH4169合金锻件晶粒度与锻造热力参数关系的建立方法,2015, ,DOI:, ISSN:
38.基于响应面法(RSM)的锻造预成形多目标优化设计,NORTHWEST INST NONFERROUS METAL RESEARCH,2009,38(6),1019-1024 ,DOI:10.3321/j.issn:1002-185X.2009.06.018, ISSN:1002-185X
39.大型GH4169合金铸锭开坯过程的数值模拟,NORTHWEST INST NONFERROUS METAL RESEARCH,2007,36(12),2094-2098 ,DOI:10.3321/j.issn:1002-185x.2007.12.006, ISSN:1002-185X





我的相册


团队信息 Team Information