学 科材料加工工程

出生年月1979-04
最高学位博士
专业技术职称副教授
博/硕导硕导
政治面貌党员
办公电话**
电子信箱liyuxin@nuc.edu.cn
李玉新，男，博士，副教授，硕士生导师，2003年7年吉林大学材料科学与工程学院金属材料与热处理专业本科毕业，获学士学位，同年考取本学院材料学专业研究生， 2008年7月获博士学位并获得吉林大学优秀博士毕业生荣誉称号。同年到中北大学材料科学与工程学院任教，现任国际科技期刊《Chemical Engineering Journal》、《Journal of Alloys and Compounds》 和《Materials and Design》审稿专家。主要从事自蔓延高温合成和快速成型（3D打印技术）方面研究，取得了大量的研究成果，先后在国内外权威刊物上发表第一作者SCI和EI收录论文30余篇。申请国家发明专利5项，授权3项，出版专著1部，教材1部，近年来先后主持和作为主要成员参与国家自然科学基金、国家青年科学基金、教育部优秀人才资助计划项目和国防科工委军品配套项目、山西省青年科学基金和山西省高等学校科技项目多项。

发表的主要SCI收录论文：

[1]Effect of Ti/Si ratio on the products of laser igniting self-propagating high-temperature synthesis in Cu–Ti–Si system，Journal of Alloys and Compounds, 2013,548:245-248.

[2] Effect of Al₂O₃content on the laser ignited self-propagating high-temperature synthesis reaction of Al₂O₃-Ti-C system for fabricating TiC-Al₂O₃composites,International Journal of Refractory Metals and Hard Materials, 2012,34: 53-56. (SCI)

[3] The microstructural evolution of Ti2SnC from Sn-Ti-C system by Self-propagating high-temperature synthesis (SHS),Int. Journal of Refractory Metals and Hard Materials 2011,29:51-754 (SCI).

[4] Effect of C/Ti ratio on self-propagating high-temperature synthesis reaction of Sn–Ti–C system for fabricating Ti2SnC ternary compounds,Journal of Alloys and Compounds2011,509:L328-L330 (SCI).

[5] Effect of powder particle size on laser induced self-propagating high temperature synthesis reaction in Al–Ti–C system,Powder Metallurgy.2011,54: 113-117 (SCI).

[6] Effect of Sn on the Laser Ignited Self-propagating High-temperature Synthesis Reaction of Al–Ti–C System.Materials Science and Technology, 2010,26: 745-749 (SCI).

[7] Effect of Sn on the Laser Ignited Self-propagating High-temperature Synthesis Reaction of Al–Ti–C System,Materials Science and Technology.2010,26: 745-749.(SCI)

[8] Effect of TiC content on Ni/TiC composites by direct laser fabrication,Materials and Design,2009, 30:1409-1412 (SCI).

[9]Effect of process parameter on the combustion temperature of laser-induced self-propagating high-temperature synthesized Al/TiC composites,Journal of Materials Processing Technology, 2009,209: 2564-2569 (SCI).

[10]Effect of Ni contents on the microstructure and mechanical properties of TiC–Ni cermets obtained by direct laser fabrication,International Journal of Refractory Metals and Hard Materials. 2009,27: 552-555(SCI).

[11]Study of Ni₃Al/TiC composites by laser ignited self-propagating high-temperature synthesis (LISHS),Chemical Engineering Journal,2008, 140: 621-625 (SCI).

[12] Thermodynamicand lattice calculation of TiC_x produced from Al-Ti-C powders by laser igniting self-propagating high-temperature synthesis,Materials science and engineering A,2007,485: 235-239 (SCI).

[13] Effect of C/Ti ratio on the laser ignited self-propagating high-temperature synthesis reaction of Al–Ti–C system for fabricating TiC/Al composites,Materials letters,2007, 61:4366-4369 (SCI).

[14]Dissolution-precipitation mechanism of Laser igniting self-propagating high-temperature synthesis of Al/TiC composite,Advanced engineering materials,2007, 9: 689-694 (SCI).

授权的国家发明专利：

(1) 激光诱导自蔓延高温合成TiC粉体的方法，专利号：ZL**4.1。

(2) 一种镁离子电池正极的制备方法,专利号： ZL**3.5。

(3 )基于聚碳酸酯粉末的激光烧结快速成型材料，专利号：ZL**4.3。

主持和参与的课题：

(1) 国家自然科学基金“覆膜钼粉激光快速成型件高温烧结与熔渗机理研究”。 (2) 国家自然科学基金“碳纳米颗粒荧光发射高效可调机制的研究”。 (3) 教育部新世纪优秀人才支持项目“金属零件选区激光熔化技术”。 (4) 山西省青年科学基金：“激光诱导自蔓延高温合成法制备Al/TiC复合材料”。 (5) 山西省高校科研项目：“Al-C-Ti系粉末材料激光点火自蔓延烧结及产物的研究”。