性别：女
职务/职称：副教授
所属学科专业：材料成型及控制工程
是否硕导：是 是否博导：否
院内任职：机电材料与成型系党支部组织委员
联系方式：
邮箱：houjuan@usst.edu.cn
个人主页：http://clxy.usst.edu.cn/3602/list.htm
一、主要学习与工作经历
· 2018-至今: 上海理工大学材料科学与工程学院，副教授
· 2016-2018: 通用电气（中国）研究开发中心有限公司，高级材料工程师
· 2013-2016: 中科院上海应用物理研究所，副研究员
· 2011-2013：中科院金属研究所，助理研究员
· 2010-2011：日本东北大学，博士后
· 2005-2010：中科院金属研究所，硕博连读
二、主要科研工作与成绩
二、主要科研工作与成绩
从事金属增材制造方向的研究工作，包括不锈钢、铝合金、高温合金等多种金属材料的打印工艺、性能调控、后处理制度以及相关材料标准的建立。主持和参加国家自然科学基金、中科院先导专项、973计划等项目，在国内外SCI期刊发表论文20余篇。
主要科研项目：
1. 2021.01-2024.12 3D打印堆内构件不锈钢组织调控及其对服役性能影响机制，国家自然科学基金面上项目，主持。
2. 2019.02-2022.05 CR929飞机铝合金激光熔覆成型3D打印件材料规范建立试验件制造，中国商飞上海飞机设计院，主持。
3. 2019.06-2021.12 燃油喷嘴增材制造工艺优化研究，国防科工局，参研单位负责人，主持。
4. 2020.05~2020.10 3D打印堆芯过滤组件成形技术及测试，苏州三峰激光科技/中广核工程公司，主持。
5. 2020.02-2020.10 PBF成型滤网的成型与检测，中广核工程公司，主持。
6. 2016.01—2019.12 Cr离子变价对镍基合金氟盐腐蚀行为的影响及机理研究，国家自然科学基金青年基金项目，主持。
7. 2016.01—2016.12 中国科学院战略性先导科技专项，“未来先进核裂变能—钍基熔盐堆核能系统材料腐蚀性能评价与测试”子课题，主持。
代表性论文：
1. Juan Hou, Binbin Dai, Ying Li, Jianguang Zhao, Zhuoer Chen, Dong Pan, Yuman Zhu, Kai Zhang, Aijun Huang, Helium bubble nucleation in Laser Powder Bed Fusion processed 304L stainless steel, Journal of Nuclear Materials, 2020, 542: 152443.
2. Juan Hou, Wei Chen, Zhuoer Chen, Kai Zhang, Aijun Huang, Microstructure, tensile properties and mechanical anistropy of selective laser melted 304L stainless steel, Journal of Materials Science and Technology, 2020, 48: 63-71.
3. Jianguang Zhao, Juan Hou, Liang Chen, Binbin Dai, Xiaojing Xiong, Lei Tan, Kai Zhang*, Aijun Huang, Evaluating impact performance of a selective laser melted 304L stainless steel with weak texture, Materials Today Communications, 2020, 25: 101299.
4. Min Liu, Juan Hou*, Fenfen Han, Renduo Liu, Xingtai Zhou, Effects of He ion irradiation on the corrosion performance of alloy GH3535 welded joint in molten FLiNaK, Corrosion Science, 2019, 146: 172-178.
5. Juan Hou, Fenfen Han, Xiangxi Ye, Bin Leng, Min Liu, Yanling Lu, Xingtai Zhou,Effect of Surface Decarburization on Corrosion Behavior of GH3535 Alloy in Molten Fluoride Salts, Acta Metallurgica Sinica, 2019, 32: 401-412.
6. Yasheng Zhu, Jie Qiu,Juan Hou*, Wenguan Liu, Huaican Chen, Hua Ai, Guojun Yu, Jianqiang Wang, Xingtai Zhou, Effects of SO42- ions on the corrosion of GH3535 weld joint in FLiNaK molten salt, Journal of Nuclear Materials, 2017, 492: 122-127.
7. Juan Hou, Guojun Yu, Chaoliu Zeng, Hua Ai, Ruobing Xie, Yanjun Chen, Xingtai Zhou, Leidong Xie, Jianqiang Wang, Effects of exposing duration on corrosion performance in weld joint of Ni-Mo-Cr alloy in FLiNaK motel salt, Journal of Fluorine Chemistry, 2016, 191: 110-119.
8. Yasheng Zhu, Juan Hou*; Guojun Yu, Jie Qiu, Shuangjian Chen, Xingtai Zhou, Effects of exposing temperature on corrosion performance of weld joint of a Ni-Mo-Cr alloy, Journal of Fluorine Chemistry, 2016, 182: 69-75.
9. Qunjia Peng, Juan Hou, Yoichi Takeda, Tetsuo Shoji, Effect of chemical composition on grain boundary microchemistry and stress corrosion cracking in Alloy 182 Corrosion Science, 2013, 67: 91-99.
10.J. Hou, J.Q. Wang, W. Ke, E.H. Han, Effect of Mono tension and Biaxial Tension on Microstructure and Stress Corrosion Cracking of Alloy 690TT, Materials Science Engineering A, 2008, 518: 19-26.
11.J. Hou, Q.J. Peng, K. Sakaguchi, Y. Takeda, J. Kuniya, T. Shoji, Effect of hydrogen in Inconel Alloy 600 on corrosion in high temperature oxygenated water, Corrosion Science, 2010, 52: 1098-1101.
12.J. Hou, T. Shoji, Z.P. Lu, Q.J. Peng, J.Q. Wang, E-H. Han, W. Ke, Residual strain measurement and grain boundary characterization in the heat-affected zone of a weld joint between Alloy 690TT and Alloy 52, Journal of Nuclear Materials, 2010, 397: 109-115.
13. J. Hou, Q. J. Peng, Y. Takeda, J. Kuniya, T. Shoji, J.Q.Wang, E. H. Han, W. Ke, Microstructure and stress corrosion cracking of the fusion boundary region in an alloy 182-A533B low alloy steel dissimilar weld joint, Corrosion Science, 2010, 52: 3949-3954.
14. J. Hou, Q. J. Peng, Y. Takeda, J. Kuniya, T. Shoji, J.Q.Wang, E. H. Han, W. Ke, Microstructure and mechanical property of the fusion boundary region in an Alloy 182-low alloy steel dissimilar weld joint, Journal of Material Science, 2010, 45: 5332-5338.
15. J. Hou, Q.J. Peng, Z.P. Lu, T. Shoji, J.Q. Wang, E-H. Han, W. Ke, Effects of cold working degrees on grain boundary characters and strain concentration at grain boundaries in Alloy 600, Corrosion Science, 2011, 53: 1137-1142.
16. J. Hou, Q.J. Peng, T. Shoji, J.Q. Wang, E-H. Han, W. Ke, Effects of cold working path on strain concentration, grain boundary microstructure and stress corrosion cracking in Alloy 600, Corrosion Science, 2011, 53: 2956-2962.
17. Q.J. Peng, J. Hou, K. Sakaguchi, Y. Takeda, T. Shoji, Effect of hydrogen on corrosion of Inconel Alloy 600 in high temperature hydrogenated waster, Electrochimica Acta, 2011, 56: 8375-8386.
