李虎林
副研究员
Email: lhl666@sjtu.edu.cn

基本信息
荣耀奖励
著作教材
论文作品
主讲课程
科研项目
基本信息
荣耀奖励
著作教材
论文作品
主讲课程
科研项目
李虎林，工学博士，副研究员，博士生导师。主持工信部、科工局及各大军工集团科研项目10余项，研究内容涵盖航空、航天、舰船及陆基装甲车等多个领域。近年来发表SCI/EI/国际会议及其它学术论文30余篇，申请发明专利20余项，其中授权发明专利7项，制定国家标准1项。主要研究方向：智能装备设计及服役性能评价、智能轴承设计及寿命预测。


GB∕T 38068-2019 船用高速柴油机重载滑动轴承
1)HuLinLi*, ZhongWei Yin, Yanzhen Wang, A studyon the wear behavior of tin-based journal bearing under different workingconditions, Industrial Lubrication and Tribology, 2019, DOI:10.1108/ILT-04-2019-0123. (SCI&EI)
2)Hulin Li*, Jingshu Cao, Studyon the tribological properties of bearing alloys under oil lubrication, Mechanical EngineersPart C Journal of Mechanical Engineering Science, 2020, DOI: 10.1177/2168. (SCI&EI)
3)HuLinLi,ZhongWeiYin*,DanJiang,LiYongJin, YanFeng Qu, A study of the static/kinetic friction behavior ofPTFE-based fabric composites, Tribology Transaction, 2018(6):122-132, (SCI&EI)
4)HuLinLi,ZhongWeiYin*,DanJiang,LiYongJin, Tribological behavior of hybrid PTFE/Kevlar fabric composites with differentweave densities, Industrial Lubrication and Tribology, 2016, (68):278-286.(SCI&EI)
5)HuLinLi,FanPei Zeng, ZhongWei Yin*, Dan Jiang, YaJun Huo, A study on the tribologicalbehavior of hybrid PTFE/Kevlar fabric composites filled with nano-SiC and/orsubmicron-WS2 fillers, Polymer composites, 2016,37 (7) :172-178. (SCI&EI)
6)HuLin Li, ZhongWei Yin,DanJiang, LiYong Jin, YuQing Cui, A study of the tribological behavior of transferfilms of PTFE composites formed under different loads, speeds and morphologiesof the counterface, Wear, 2015(328-329):17–27.(SCI&EI)
7)HuLinLi,ZhongWei Yin, Dan Jiang, YaJun Huo, YuQing Cui, Tribological behavior of hybridPTFE/Kevlar fabric composites with nano-Si3N4 and submicron size WS2 fillers,Tribology International, 2014(80):172-178.(SCI&EI)
8)HulinLi*, Yanzhen Wang, NingZhong, Yonghong Chen and Zhongwei Yin. Study on the performance of journalbearings in different lubricants by CFD and FSI method with thermal effect andcavitation. MATECWeb of Conferences, 2018(249)03006. (EI)
9)HulinLi*,YanzhenWang,Zhongwei Yin, Study on the ultimate load carrying capacity ofjournal bearings with different materials and surface treating processes, 6th International Conference on Mechanical,2019(689). (EI)
10)HuLinLi,ZhongWei Yin*, Dan Jiang, LiYong Jin, YuQing Cui, Jun Cao, Tribologicalbehavior of PTFE based single layer and double layer fabric composites. WITTransactions on The Built Environment, Vol 166, 2016 WIT Press.
11)NingDing,HulinLi*,ZhongweiYin,NingZhong,Journalbearing seizure degradation assessment and remaining useful life prediction based on long short-term memoryneural network, Measurement,2020, https://doi.org/10.1016/j.measurement.2020.108215. (SCI&EI)
12)YanzhenWang, Zhongwei Yin, Hulin Li,Gengyuan Gao, Xiuli Zhang. Friction and wear characteristics of ultrahighmolecular weight polyethylene (UHMWPE) composites containing glass fibers andcarbon fibers under dry and water-lubricated conditions[J]. Wear (SCI&EI). 2017(380–381): 42-51.
13)J. Cao,Z.W. Yin, H.L. Lin, etc,Tribological studies of soft and hard alternated composite coatings withdifferent layer thicknesses, Tribology International, 2017(110):326-332. (SCI&EI).
14)J. Cao,Z.W. Yin, H.L. Li, etc, Tribologicaland Mechanical Properties of Ti2AlC Coating at Room Temperature and 800 ℃，CeramicsInternational, 2018 (1):1046-1051(SCI&EI).
15)J.Cao, Z.W. Yin, H.L. Li, etc, Designand analysis of a self-lubricating nuclear joint bearing above 320°C，IndustrialLubrication and Tribology, 2017(69):95-104 (SCI&EI)
16)Yu Q C, Zhong W Y, HuL L. Influence of tension in T300/epoxy prepreg winding process on theperformance of the bearing composites[J]. Journal of Reinforced Plastics &Composites, 2017, 36(15). (SCI&EI)
17)QinDong, ZhongweiYin,HulinLi,XiaoyunZhang,DanJiang,NingZhong.Effectsof Ag micro-addition on structure and mechanical properties of Sn-11Sb-6CuBabbitt[J]. Materials Science and Engineering: A. 2018(722): 225-230, (SCI&EI).
18)Qin Dong, Zhongwei Yin?, Hulin Li, Gengyuan Gao, Ning Zhong, Yonghong Chen, Simulation and experimental verification of fatigue strength evaluation of journalbearing bush, Engineering Failure Analysis, 2020,109. (SCI&EI)
19)J. Cao, Z.W. Yin, H.L.Li, etc, Research progresses and suggestions of manufacturing technologiesof engine bearing bushes. IOP Conference Series: Materials Science andEngineering, 2017 (1): 012005 (EI)
20)YanzhenWang, Zhongwie Yin, Hulin Li, GengyuanGao. Tribological behaviors of UHMWPE composites with different counter surfacemorphologies. IOP Conference Series: Materials Science and Engineering.2017, 272(1): 012022. (EI)
21)Liu, WH ; Cao, J He, T; Gao, GY; Li, HL; Yin, ZW .Optimum cutting depth andspacing of road header picks-a numerical simulation using a three-dimensionalcracking method, TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICALENGINEERING,2019,43(3), 366-375. (SCI&EI)
22)陈永红,钟宁,尹忠慰,李虎林,董琴. 微量元素Cd对锡基轴承合金SnSb11Cu6组织与力学性能的影响, 中国有色金属学报，2019(029)1226-1232 (EI)
23)霍亚军，尹忠慰，李虎林，曲艳峰，基于ABAQUS的关节轴承径向受载试验的热力耦合分析，轴承，2015.02.03，1：7-11
24)李虎林;夏成明;杨震春;付朝晖, 泵内部流场的三维数值仿真,机械设计与制造, 2009(9)201-202.
25)李虎林，陈威，于安民，高宏,基于ANSYS参数化语言的压力容器优化设计, 机械工程与自动化,2007(2)56-58.
26)李虎林，易湘斌,产品开发中的多软件联合仿真技术, 机械设计与制造, 2008(4)55-56.
27)李虎林,杨震春,付朝晖,推进剂在轨自动补加技术研究, 中国航天，2012, 12：36-39
28)刘宇飞，尹忠慰，蒋丹，李虎林，霍亚军，黏接压力对PTFE/Kevlar双层织物摩擦磨损性能的影响，东华大学学报(自然科学版)，2015.11.07，41（4）：433-437
29)金李勇，尹忠慰，蒋丹，李虎林，17-4PH不锈钢表面草酸盐膜润滑性能的影响因素，东华大学学报自然科学版，2016.10.27，42（4）：496-499
30)阎树田，易湘斌，李虎林，面向敏捷化可重构制造系统的产品分类方,机械设计与制造, 2008(4)178-180.
31)易湘斌，王富强，李虎林,一种可重构机床机械系统模块设计, 机械与电子,2007(12)19-22.
32)孙猛,李虎林，船用高速柴油机重载滑动轴承关键技术指标验证分析研究，船舶标准化与质量，2019，3，6-11.


1）2016-2020工信部高技术船舶科研项目船用低速机工程（一期）项目课题“船用低速机轴瓦研制”子课题，负责人
2）2018-2021科工局项目“XX可靠性及关键工艺技术研究”子课题，负责人
3）2019-2020北方发动机研究所科研项目“主轴瓦和连杆瓦部件旋转试验机改造”，负责人
4）2017-2018武汉理工大学“滑动轴承磨损故障模拟试验台设计”，负责人
5）2017-2019重点实验室基金“GTF发动机齿轮箱系统动态优化技术与验证”，负责人
6）2019-2020重点实验室基金“滑动轴承压力分布与油膜厚度分析”，负责人
7）2017-2018庆安集团有限公司“关节轴承摩擦特性技术研究”，负责人
8）2017-2019中国船舶工业综合技术经济研究院“船用高速柴油机重载滑动轴承试验验证”，负责人
9）2006-2009 航天科技集团三院“XX弹翼展开装置研制”，负责人
10）2009-2012 航天科技集团三院“XX尾翼展开装置研制”，负责人
11）2017-2018明阳科技股份有限公司“充压变形式轴承外圈内衬粘结方法”，负责人
12）2013-2015国家863项目子课题“关节轴承自润滑衬垫预浸技术研究”，主要完成人
13）2013-2015 航天科技基金项目“热球窝管用碳/碳复合材料减摩技术研究”，主要完成人
14）2004-2006 科工局可靠性增长课题“**表面张力管理装置可靠性增长”，主要完成人
15）2019-2022国家自然科学基金面上项目“基于双粗糙面热弹塑性接触摩擦与局部润滑退化的低副抗胶合性能研究”，技术骨干