郑诚功
上海交通大学生物医学工程学院讲席教授(2020.02.01-)，曾获聘北京航空航天大学****及台湾阳明大学特聘讲座教授。目前担任世界华人生物医学工程学会候任会长, 新创期刊Medicine in Novel Technology andDevices执行主编, Medical Engineering and Physics，医用生物力学等期刊副主编与编委，也曾经担任世界华裔骨科学会会长及国际SCI期刊Journal of Orthopaedic Surgery andResearch主编等学术职务。郑教授的研究成果主要在骨科生物力学与骨科器材的创新研发及转化，郑教授曾获颁美国生物医学工程学院会士(2017), 美国爱我华大学工程学院杰出校友奖(2016)，中华医学会骨科分会海外杰出贡献奖 (2016)等奖项。

研究方向
骨骼肌肉系统生物力学研究，骨科植入物研发，康复医疗创新技术研究
代表性论文专著
1. Wang H, Zhang M,Cheng CK(2020). Changing the diameter of the bone tunnel ismore effective than changing the tunnel shape for restoring joint functionalityafterACL reconstruction. Frontiers in Bioengineering and Biotechnology,(SCI) DOI: 10.3389/fbioe.2020.00173
2. Wang H, Zhang M, Cheng CK (2020). A novel protection liner to improvegraft-tunnel interaction following anterior cruciate ligament reconstruction: afinite element analysis. Journal of Orthopaedic Surgery and Research,(SCI) DOI: 10.1186/s13018-020-01755-x
3. Wong PJ, SongSM, Tsai PH, Nien YY, Jang SC J, Cheng CK, Chen CH (2020). Relationship between theSurface Roughness of Biodegradable Mg-Based BulkMetallic Glass and the Osteogenetic Ability of MG63Osteoblast-Like Cells. Materials. 2020, 13: 1188. (SCI)
4. Cao XY, Chen C, Tian N, Dong X, Xu LJ, Cheng CK (2020). Long-term study on the osteogeneticcapability and mechanical behavior of a new resorbable biocomposite anchor in acanine model, Journal of Orthopaedic Translation, 21(2020): 81-90. (SCI)
5. Cao XY, Fang N,Tian N, Dong X, Cheng CK (2020). Influences ofUnidirectional Stretching Process on Mechanical Properties of Absorbable Patchfor Rotator Cuff Repair. Journal of MedicalBiomechanics, 2020, 35, 1: 27-34.
6. Wang HZ, Zhang B, Cheng CK (2019).Stiffness and shape of the ACL graft affects tunnel enlargement and graft wear. KneeSurgery, Sports Traumatology, Arthroscopy. (SCI)DOI:10.1007/s00167-019-05772-0
7.Cheng CK, Wang XH, Luan YC, Zhang NZ,Liu BL, Ma XY, Nie MD(2019).Challenges of pre-clinicaltesting in orthopedic implant development. Medical Engineering & Physics,72(2019):49-54.(SCI)
8. Wang HZ, Kang HJ, Yao J, ChengCK, Woo Savio L.-Y. (2019). Evaluation of a magnesium ring device formechanical augmentation of a ruptured ACL: Finite element analysis. Clinical biomechanics, 68(2019):122-127. (SCI)
9. Liu Y, Chen HJ, Zhang B, Liu XQ, Xiao J, Cheng CK(2019). A single-component and hemi-hip prosthesisfollowed up for 43 years-a case report. Medicine, 2019, 98:8(SCI)
10. Cao XY, Tian N, Dong X, ChengCK (2019). Implant Coating Manufactured by Micro-Arc Oxidation and DipCoating in Resorbable Polylactide for Antimicrobial Applications inOrthopedics. Coatings. 2019, 9(5):284. (SCI)
11. Cao XY, Tian N, Dong X, ChengCK (2019). Polylactide Composite Pins Reinforced with BioresorbableContinuous Glass Fibers Demonstrating Bone-like Apatite Formation and SpiralDelamination Degradation. Polymers. 2019. 11(5), 812. (SCI)
12.Wong CC, Wong PC, Tsai PH, Jang SC, ChengCK, Chen HH, Chen CH(2019). Biocompatibility and Osteogenic Capacity ofMg-Zn-Ca Bulk Metallic Glass for Rabbit Tendon-Bone Interference Fixation. InternationalJournal of Molecular Sciences, 2019,20(9): 2191. (SCI)
13.Fang CH, Cheng CK, QuTB, Zhang JH, Zhang B, Hua Q, Yan SG(2019). “The posterolateral corner-lockedtechnique is applicable in a Chinese population regarding the tibial componentrotation alignment in Total Knee Arthroplasty”. The Journal of Knee Surgery,2019(SCI).DOI: 10.1055/s-
14.Wang XH, Dong X, Zhu BZ, Lei J, Jin ZM, Suguro Toru, Cheng CK (2019). “A preclinicalmethod for evaluating the kinematics of knee prostheses”. Medical Engineering & Physics,66(2019): 84-90. (SCI)
15.Wang XH, Li H, Dong X, Zhao F, ChengCK (2019). “Comparisonof ISO 14243-1 to ASTM F3141 in terms of wearing of knee prostheses”. ClinicalBiomechanics, 63(2019):34-40. (SCI)
16. Wei ZY, Zhang GQ, Qi XZ, Wang HZ, Zhang M, Ma XS, Yao J, Cheng CK.(2019) ” Morphological Feature of the FittingCurves of Proximal Femoral Canal in Adults with Developmental Dysplasia of theHip” Journal of Medical Biomechanics, 2019,34(4): 417-424.
17.Ma XH, Yao J, Wang HZ, Qi XZ, Wei ZY, Liu BL, Zhang M, Cheng CK.(2019) “ Finite Element Analysis onDifferent Geometric Shapes of Tibial Component Pegs in Unicompartmental KneeArthroplasty”. Journal of Medical Biomechanics,2019, 34(2):186-192.
18.Zhang M, Sarah Junaid, Thomas Gregory, Ulrich Hansen, Cheng CK (2019). “Effect of baseplate positioning onfixation of reverse total shoulder arthroplasty”. Clinical Biomechanics, 62(2019):15-22.(SCI)
19. Kuang-Ta Yao, Hung-Chan Kao, Cheng CK, Hsu-Wei Fang, Chang-Hung Huang, Ming-Lun Hsu(2019).“Mechanical performance of conical implant-abutment connections under different cyclic loading conditions.” Journalof the Mechanical Behavior of Biomedical Materials, 90(2019):426-432. (SCI)
20. Wang XH, Song DY, Dong X, SuguroT, Cheng CK. (2019) “Motiontype and knee articular conformity influenced mid-flexion stability of a singleradius knee prosthesis”. Knee Surgery, Sports Traumatology,Arthroscopy, 27(5), 1595-1603. (SCI)

联系方式
邮箱地址：ckcheng2020@sjtu.edu.cn
办公地址：徐汇校区教三楼MED-X研究院201室
网址：https://www.researchgate.net/profile/Cheng-Kung_Cheng