姓名： 陈军
职称： 长聘教授
博导/硕导： 博导
所属二级机构： 塑性成形技术与装备研究院
通讯地址： 上海市华山路1954号
邮编： 200030
E-mail： jun_chen@sjtu.edu.cn
联系电话： +86-

从事专业： 塑性加工
学习与工作简历： 1986.9-1993.7 山东工业大学材料科学与工程系 本科、硕士
1993.9-1996.7 上海交通大学塑性成形工程系 博士
1996.8-1998.4 上海交通大学塑性成形工程系 讲师
1998.4-1999.4 美国密歇根大学 访问****
1999.4-2004.8 上海交通大学塑性成形工程系 副教授
2004.9-2004.12 上海交通大学塑性成形工程系 教授，2004.10起任模具CAD国家工程研究中心副主任
2004.12-2011.4 上海交通大学塑性成形工程系 教授、博导，期间，2006.7-2011.4任上海交通大学塑性成形工程系副主任
2011.4- 今 上海交通大学材料学院塑性成形技术与装备研究院 教授、博导
2011.4- 2015.5 上海交通大学材料学院塑性成形技术与装备研究院 副院长
2015.5- 今 上海交通大学材料学院塑性成形技术与装备研究院 院长

研究方向一 轻质高强薄板塑性成形与数控渐进成形
研究方向二 塑性成形力学模型与数值仿真、设计优化
研究情况 先后主持国家自然科学基金联合基金重点项目和面上项目、973课题、863项目、国家科技重大专子课题、GF基础科研项目子课题、科工局材料专项子课题、国家重点研发计划项目子课题、上海市科委项目、上海市教委项目和上海市经信委项目，以及中国航发集团、中国航天科技集团、宝钢集团和上汽集团下属单位与福特汽车公司等企业资助课题40多项。在轻质高强薄板（先进高强度钢、钛合金、铝合金）冷/热成形和数控柔性渐进成形、塑性成形力学模型及其多物理场数值仿真、智能设计与设计优化方面取得了具有学术创新性和工业应用价值的系列研究成果，发表学术论文250多篇，其中SCI论文110多篇。申请国家发明专利40多项（其中授权26项），软件著作权授权10项；主编和参编中英文著作、手册等10部。
讲授主要课程 本科生课程：现代模具数字化设计与制造技术；博士生课程：塑性成形过程仿真理论与系统分析
教学研究
代表性论文、论著 [1] Zhidong Chang, Jun Chen*. Analytical model and experimental validation of surface roughness for incremental sheet metal forming parts, International Journal of Machine Tools and Manufacture, 146 (2019) 103453
[2] Zhidong Chang, Jun Chen*. Mechanism of the twisting in incremental sheet forming process, Journal of Materials Processing Technology, 276 (2020) 116396
[3] Renhao Wu, Qi Hu, Meng Li, Sheng Cai, Jun Chen*. Evaluation of the forming limit of incremental sheet forming based on ductile damage, Journal of Materials Processing Technology, 2019, Article in press
[4] Zhiheng Wang, Sheng Cai, Jun Chen*. Experimental investigations on friction stir assisted single point incremental forming of low-ductility aluminum alloy sheet for higher formability with reasonable surface quality, Journal of Materials Processing Technology, 2019, Article in press
[5] Xifeng Li, Xin Chen, Baoyong Li, Nannan Chen, Jun Chen*. Grain refinement mechanism of Ti-55 titanium alloy by hydrogenation and dehydrogenation treatment, Materials Characterization, 157 (2019) 109919
[6] Zhidong Chang, Meng Li Ming Li, Jun Chen*. Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes, 2019, International Journal of Machine Tools and Manufacture 140: 62-76
[7] Qi Hu, Li Zhang, Qiubao Ouyang, Xifeng Li, Xinhai Zhu, Jun Chen*. Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach,2018, International Journal of Plasticity,103:143-167
[8] Qi Hu, Xifeng Li, Jun Chen*. New robust algorithms for Marciniak-Kuczynski model to calculate the forming limit diagrams, 2018, International Journal of Mechanical Sciences, 148: 293-306
[9] Huan Zhang, Zixuan Zhang, Huaqing Ren, Jian Cao, Jun Chen*. Deformation mechanics and failure mode in stretch and shrink flanging by double-sided incremental forming, 2018, International Journal of Mechanical Sciences, 144: 216-222
[10] Xifeng Li, Nanan Chen, H Wu, Jun Chen*, F Qu. Low-temperature superplastic gas bulging of Ti-55 alloy by hydrogen addition, 2018, International Journal of Hydrogen Energy, 43(27): 12455-12459
[11] Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under non-associated flow rule, 2018, European Journal of Mechanics, A/Solids, 67: 45-57
[12] Qi Hu, Xifeng Li, Xianhong Han, Heng Li, Jun Chen*. A normalized stress invariant-based yield criterion: modeling and validation, 2017, International Journal of Plasticity 99: 248-273
[13] Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under nonassociated flow rule, 2018, European Journal of Mechanics A/Solids 67: 45-57
[14] Xianhong Han, Yaoyao Zhong, Shulin Tan, Yanan Ding, Jun Chen*. Microstructure and performance evaluations on Q&P hot stamping parts of several UHSS sheet metals, Science China Technological Sciences, 2017, doi: 10.1007/s11431-016-9111-y
[15] Qi Hu, Xifeng Li, Xianhong Han, Jun Chen*. A new shear and tension based ductile fracture criterion: modeling and validation, 2017, European Journal of Mechanics A/Solids, 66: 370-386
[16] Xifeng Li, Nannan Chen, Jun Chen*, Qiongfeng Mei, Li Wan, CL Jia, H Liu. Superplastic deformation behavior of Ti-55 alloy without and with 0.1wt%H addition, Materials Science & Engineering A, 2017
[17] Xifeng Li, Jun Jiang, Shen Wang, Jun Chen*,YQ Wang. Effect of hydrogen on the microstructure and superplasticity of Ti-55 alloy, International Journal of Hydrogen Energy, 2017 (42): 6338-6349
[18] Tingting Cao, Bin Lu, Hengan Ou, Hui Long, Jun Chen*. Investigation on a new hole-flanging approach by incremental sheet forming though a featured tool. International journal of Machine Tools and Manufacture, 2016, 110:1-17
[19] Xiangyu Yu, Jun Chen*, Jieshi Chen. Interaction effect of cracks and anisotropic influence on degradation of edge stretchability in hole-expansion of advanced high-strength steel, International Journal of Mechanical Sciences, 2016(105):348-359
[20] Bin Lu Yang Fang, Dongkai Xu, Jun Chen*, Sheng Ai, Hui Long, Hengan Ou, Jian Cao. Investigation of material deformation mechanism in double side incremental sheet forming. International Journal of Machine Tools and Manufacture, 2015 (93): 37-48
[21] Jun Chen*, Yuzhong Xiao, Wei Ding, Xinhai Zhu. Describing the non-saturating cyclic hardening behavior with a newly developed kinematic hardening model and its application in springback prediction of DP sheet metals, Journal of Materials Processing Technology 215 (2015): 151 - 158
[22] Feifei Zhang, Xifeng Li, Yongchao Xu, Jun Chen*, Jieshi Chen, Gang Liu, Shijian Yuan. Simulating sheet metal double-sided hydroforming by using thick shell element, Journal of Materials Processing Technology, 2015, 221: 13-20
[23] Bin Lu, Yang Fang, Dongkai Xu, Jun Chen*, Hengan Ou, NH Moser, Jian Cao. Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool International Journal of Machine Tools and Manufacture, 2014, (85): 14-29
[24] Feifei Zhang, Jieshi Chen, Jun Chen*, Xinhai Zhu. Forming limit model evaluation for anisotropic sheet metal under through-thickness normal stress, International Journal of Mechanical Sciences, 2014, 89: 40-46
[25] Yang Fang, Bin Lu, Jun Chen*, Dongkai Xu, Hengan Ou. Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming. Journal of Materials Processing Technology 2014, (214): 1503-1515
[26] Dongkai Xu, Weichao Wu, Rajav Malhotra, Jun Chen, Bin Lu, Jian Cao. Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming. International Journal of Machine Tools and Manufacture, 2013,73: 37-46
[27] Yuzhong Xiao, Jun Chen*, Xinhai Zhu, Jian Cao. Modified maximum mechanical dissipation principle for rate-independent metal plasticity, ASME Journal of Applied Mechanics, 80(061020-1), 2013
[28] Bin Lu, Jun Chen*, Hengan Ou, Jian Cao. Feature-based tool path generation approach for incremental sheet forming process. Journal of Materials Processing Technology, 2013, 213(7):1221-1233
[29] Yuzhong Xiao, Jun Chen*, Jian Cao. A generalized thermodynamic approach for modeling nonlinear hardening behaviors. International Journal of Plasticity, 2012, 38: 102-122
[30] Feifei Zhang, Jun Chen*, Jieshi Chen, Jian Lu, Gang Liu, Shijian Yuan. Overview on constitutive modeling for hydroforming with the existence of through-thickness normal stress. Journal of Materials Processing Technology, 2012, 212(11): 2228-2237
[31] Haibo Li, Jun Chen*, Jimmy Yang. Experimental and numerical investigation of laminated steel sheet in V-bending process considering nonlinear visco-elasticity of polymer layer. Journal of Materials Processing Technology, 2012, 212(1): 36-45
[32] Dongkai Xu, Jun Chen*, Yucheng Tang, Jian Cao. Topology optimization of die weight reduction for high-strength sheet metal stamping. International Journal of Mechanical Sciences, 2012, 59(1): 73-82

毕业博士生数 11人（导师）、19人（付导师）
毕业硕士生数 56人
参加学术团体、任何职务 华中科技大学材料成形与模具技术国家重点实验室 学术委员会委员
山东省高校机械装备设计与仿真重点实验室 学术委员会副主任
中国模具工业协会经济技术信息委员会 副主任委员
中国机械工程学会塑性工程分会 常务理事
上海市模具行业协会 副会长
Journal of Materials Processing Technology 编委
Proceedings of iMeche, Part B: Journal of Engineering Manufacture, Associate Editor
上海交通大学学报、塑性工程学报、锻压技术、精密成型工程和上海航天科技等期刊的编委

申请专利 发明专利授权25项


荣誉和奖励 上海市优秀学术带头人；省部级科技进步一等奖1项；国际学术会议杰出贡献奖2项；人才奖励计划4项
其他 主编和参编中、英文著作、手册等11部。