姓名： 李志强
职称： 研究员
博导/硕导： 博导
所属二级机构： 复合材料研究所
通讯地址： 上海市闵行区东川路800号材料D楼333室
邮编： 200240
E-mail： lizhq@sjtu.edu.cn
联系电话： 86-

从事专业： 金属基复合材料，粉末冶金及纳米复合技术
学习与工作简历： 1992-1998 哈尔滨工业大学材料学院 铸造专业 工学学士、硕士
1998-2001 哈尔滨工业大学航天学院 复合材料专业 材料学博士
2002-2003 上海交通大学材料学院 博士后
2004至今 上海交通大学材料学院
2006年晋升副研究员
2013年晋升研究员

研究方向一 金属基复合材料制备科学
研究方向二 金属材料仿生复合及强韧化
研究情况 致力于采用粉末冶金技术制备金属基纳米复合材料的基础和应用研究，近年来开展金属材料仿生复合化的探索研究，即应用生物材料经过自然进化而选择的层状、多孔和梯度结构设计，制备强韧兼备、结构功能一体化的新型仿生金属基复合材料。其中，关于碳纳米管/铝基层状仿生复合材料的创新研究已经取得突破性进展，获得国家自然科学基金、国家973计划、国家863计划的资助，是多学科交叉的前沿性研究领域。
讲授主要课程 金属基复合材料；复合材料性能结构与表征。
教学研究
代表性论文、论著 1. Hui Wei; Zhiqiang Li*; Ding-Bang Xiong; Zhanqiu Tan; Genlian Fan; Zhen Qin; Di Zhang. Toward strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design. Scripta Materialia, 75(2014) 30–33.
2. Zhanqiu Tan, Zhiqiang Li*, Ding-Bang Xiong, Genlian Fan, Gang Ji, Di Zhang*. A predictive model for interfacial thermal conductance in surface metallized diamond aluminum matrix composites. Materials and Design, 55 (2014) 257-262.
3. Xizhou Kai, Zhiqiang Li*, Genlian Fan, Qiang Guo, Dingbang Xiong, Wenlong Zhang, Yishi Su, WJ Moon, Di Zhang*. Enhanced strength and ductility in particulate-reinforced aluminum matrix composites fabricated by flake powder metallurgy. Materials Science and Engineering A, 2013, 587(0): 46-53.
4. Zhanqiu Tan; Zhiqiang Li*; Genlian Fan; Qiang Guo; Xizhou Kai; GangJi; Lanting Zhang; Di Zhang*. Enhanced thermal conductivity indiamond/aluminum composites with a tungsten interface nanolayer. Materials and Design, 2013, 47:160-166. 5. Tang J, Fan GL, Li ZQ*, Li XD, Xu R, Li Y, Zhang D*. Moon WJ, Kaloshkin SD, Churyukanova M. Synthesis of carbon nanotube/aluminium composite powders by polymer pyrolysis chemical vapor deposition. Carbon, 2013,55:202-208.
6. Xizhou Kai, Zhiqiang Li*, Genlian Fan，Qiang Guo, Zhanqiu Tan, Wenlong Zhang, Yishi Su, Weijie Lu, Won-Jin Moon and Di Zhang*. Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy. Scripta Materialia, 68 (2013) 555–558
7. Tan ZQ, Li ZQ*, Fan GL, Kai XZ, Ji G, Zhang LT, Zhang D*. Fabrication of diamond/aluminum composites by vacuum hot pressing: process optimization and thermal properties. Composites: Part B, 47 (2013) 173–180.
8. Tan ZQ, Li ZQ*, Fan GL, Kai XZ, Ji G, Zhang LT, Zhang D*. Diamond/aluminum composites processed by vacuum hot pressing: microstructure characteristics and thermal properties. Diamond and Related Materials,2013,31:1-5.
9. Jingyue Wang, Zhiqiang Li*, Genlian Fan, Huanhuan Pan, Zhixn Chen, Di Zhang*. Reinforcement with graphene nanosheets in aluminum matrix composites. Scripta Materialia, 66 (2012) 594–597.
10. Lin Jiang, Zhiqiang Li*, Genlian Fan, Linlin Cao, Di Zhang*. The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogeneous CNT distribution. Carbon.2012, 50:1993-1998.
11. Lin Jiang, Zhiqiang Li*, Genlian Fan, Linlin Cao, Di Zhang*. Strong and ductile carbon nanotube(CNT)/aluminum bulk nanolaminated composites with two-dimensional alignment of CNTs. Scripta Materialia, 2012, 66:331-334.
12. Linlin Cao, Zhiqiang Li*, Genlian Fan, Lin Jiang, Di Zhang*, WJ Moon and YS Kim, The growth of carbon nanotubes in aluminum powders by the catalytic pyrolysis of polyethylene glycol,Carbon, 2012, 50:1057-1062.
13. Zhanqiu Tan, Zhiqiang Li*, Genlian Fan,Wenhuan Li, Qinglei Liu,Wang Zhang and Di Zhang*. Two-dimensional distribution of carbon nanotubes in copper flake powders. Nanotechnology. Nanotechnology, 2011, 22:225603.
14. Lin Jiang, Zhiqiang Li*, Genlian Fan, Di Zhang*. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility. Scripta Materialia, 2011, 65: 412-415.
15. Xu X, Li ZQ*, Zhang D, Chen ZX. Growth of carbon nanospheres through a building block assembly method at 300 °C. Carbon, 2011, 49:275-279
16. Lin Jiang, Genlian Fan, Zhiqiang Li*, Xizhou Kai, Di Zhang*, Zhixin Chen, Sam Humphries, Greg Heness, Wing Yiu Yeung. An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder, Carbon, 2011, 49:1965-1971.
17. Xizhou Kai, Zhiqiang Li*, Wenlong Zhang, Weijie Lu, Genlian Fan, Lin Jiang, Di Zhang*. “A model for volume fraction and/or particle size selection in metal matrix composites” Materials Science & Engineering A: 2011, 530:574-579.
18. Zhiqiang Li*, Lin Jiang, Genlian Fan, Yong Xu, Di Zhang*, Zhixin Chen, Sam Humphries. High Volume Fraction and Uniform Dispersion of Carbon Nanotubes in Aluminum Powders. Micro & Nano Letters, 2010, 5(6):379-381.
19. Xin Xu, Zhiqiang Li*, Di Zhang, Zhixin Chen. In situ synthesis of nanostructured carbon reinforcement in aluminum powders. Material Letters, 2010, 64:1154-1156.

毕业博士生数 指导博士生7人，已毕业3人
毕业硕士生数 指导硕士生9人，已毕业7人
参加学术团体、任何职务
申请专利 共申请专利20余项，其中已获授权11项。
荣誉和奖励
其他