姓名： 梁加淼
职称： 工程师
博导/硕导： 硕导
所属二级机构： 凝固科学与技术研究所
通讯地址： 上海市闵行区东川路800号材料F515室
邮编： 200240
E-mail： jmliang@sjtu.edu.cn
联系电话： 86-

从事专业： 材料科学与工程
学习与工作简历：
2014.07-2014.10 新南威尔士大学 访问****
2011.02-至今 上海交通大学材料科学与工程学院, 工程师
2007.08 -2011.01 上海交通大学分析测试中心, 助理工程师，工程师
2011.09-2016.04 上海交通大学，材料科学与工程专业，博士
2004.09～2007.07 中科院金属研究所,材料物理与化学专业，硕士
2000.09～2004.07 东北大学，材料成型与控制工程专业，学士


研究方向一 金属基纳米复合材料
研究方向二 先进金属材料粉末冶金
研究情况 先后主持国家自然科学基金面上项目、科技部国际合作项目、国家电网科技项目、上海交大-西门子燃气轮机联合研发基金以及上海交大-新南威尔士大学国际合作基金等课题。作为主要成员参与国家重点研发计划，973项目以及国家自然科学基金等课题多项。申请国家发明专利27项，授权专利14项；在Acta Materialia、Nanoscale、Metallurgical and MaterialsTransactions A等国际著名期刊发表论文50余篇。
讲授主要课程 《材料的乐趣》
教学研究
代表性论文、论著
1.Yuehuang Xie, Tian Xia, Dengshan Zhou,Yifei Luo, Wei Zeng, Zhen Zhang, Jun Wang, JiamiaoLiang* and Deliang Zhang*, A novel nanostructure to achieve ultrahighstrength and good tensile ductility of a CoCrFeNiMn high entropy alloy, Nanoscale 12 (2020) 5347
2.Yuehuang Xie, Dengshan Zhou,Yifei Luo, Tian Xia, Wei Zeng, Chenguang Li, Jun Wang, Jiamiao Liang*, Deliang Zhang*，Fabrication of CoCrFeNiMn high entropy alloy matrix composites bythermomechanical consolidation of a mechanically milled powder，Materials Characterization 148(2019) 307–316
3.Yuehuang Xie, Yifei Luo, Tian Xia, WeiZeng, Jun Wang, Jiamiao Liang*,Dengshan Zhou, Deliang Zhang*，Grain growth andstrengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloymatrix nanocomposites fabricated by powder metallurgy，Journal of Alloys and Compounds 819(2020) 152937
4.Chenguang Li, Yuehuang Xie, Mingwei Zhang,Mianmian Ruan, Jun Wang, JiamiaoLiang*, Roland E. Loge, Deliang Zhang*，Enhancedstrength and toughness of bulk ultrafine grained Cu by nacre-inspired lamellarstructure，Journal of alloys and compounds 826（2020）154234
5.Chenguang Li, Mingwei Zhang, Mianmian Ruan,Jun Wang, Jiamiao Liang*,Deliang Zhang*, A nanograins-attached and ultrathin Cu flake powder fabricatedby high energy mechanical milling and dealloying, Materials Letters 265(2020) 127432
6.Chenguang Li, Wei Zeng, Yuehuang Xie, JunWang, Jiamiao Liang*, RolandE. Loge, Deliang Zhang* Annealing hardening and softening of an ultrafinegrained Cu-4.5vol.%Al2O3 nanocomposite, Materials Science & Engineering A 778 (2020) 139126
7.Chenguang Li, Yuehuang Xie,Dengshan Zhou, Wei Zeng, Jun Wang, JiamiaoLiang*, Deliang Zhang*, A novel way for fabricating ultrafine grainedCu-4.5 vol% Al2O3 composite with high strength and electrical conductivity, MaterialsCharacterization 155 (2019) 109775
8.YifeiLuo,YuehuangXie, WeiZeng, JiamiaoLiang*,DeliangZhang*, Microstructure and Mechanical Properties of Ti-6Al-4V RodsFabricated by Powder Compact Extrusion of TiH₂/Al₆₀V₄₀ Powder Blend, Metallurgical andMaterials Transactions A 50（2019）1643-1654
9.Lei Cao, Wei Zeng, YuehuangXie, Jiamiao Liang*, DeliangZhang*, Effect of powder oxidation on the anisotropy in tensile mechanicalproperties of bulk Al samples fabricated by spark plasma sintering, MaterialsScience & Engineering A 764 (2019) 138246
10. Lei Cao, Wei Zeng, Yuehuang Xie, Jiamiao Liang*, Deliang Zhang*，Effect of powder oxidation on interparticle boundaries andmechanical properties of bulk Al prepared by spark plasma sintering of Alpowder，Materials Science & Engineering A，742 (2019) 305–308
11. J. M. Liang*,L. Cao, Y. H. Xie, Y. Zhou, Y. F. Luo, K. Q. Mudi, H. Y. Gao, J. Wang，Microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloyjoints produced by transient liquid phase bonding using spark plasma sintering，Materials Characterization 147(2019) 116–126
12. X. Yao, Y.F. Zheng, M.Z. Quadir, C. Kong, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*, Graingrowth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion, Journalof Alloys and Compounds 745 (2018) 519-524
13. J. M. Liang, Z. Zhang, M.T. Jia, L. Cao, C. G. Li, H.Y. Gao, J. Wang, D.L.Zhang, The microstructures and tensile mechanical properties of ultrafinegrained and coarse grained Al-7Si-0.3Mg alloy rods fabricated from machiningchips，Materials Science & Engineering A 729 (2018) 29–36
14. WenjingWang, Wei Zeng, Chenguang Li, JiamiaoLiang*, Deliang Zhang*, Microstructure and mechanical properties ofultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced bypowder metallurgy techniques, Materials Science & Engineering A 712 (2018) 214–222
15. TianXia, Yuehuang Xie, Chao Yang, Wei Zeng, Zhongnan Bi, Jiamiao Liang*, Guoliang Zhu*, Jun Wang，Strengthening effects and thermal stability of the ultrafine grainedmicrostructure of a nickel base superalloy at room and elevated temperatures，Materials Characterization 145(2018) 362–370
X.Yao, Z. Zhang, Y. F. Zheng, C. Kong, M. Z. Quadir, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*，Effects of SiC Nanoparticle Content on the Microstructure andTensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp NanocompositesFabricated by Powder Metallurgy, Journal of Materials Science &Technology 33 (2017) 1023–1030

毕业博士生数
毕业硕士生数
参加学术团体、任何职务 上海市机械工程学会粉末冶金专业委员会委员，中国通用零部件协会粉末冶金分会会员。
申请专利 27项
荣誉和奖励 2019年中国电力科技进步三等奖；
2019年国家电网科技进步二等奖；
2013年上海交通大学SMC-晨星优秀青年教师奖励计划；
2015年上海交通大学教学成果1等奖。
其他