姓名： 李军
职称： 副教授
博导/硕导： 博导、硕导
所属二级机构： 先进材料与凝固研究所
通讯地址： 材料B楼 308
邮编： 200240
E-mail： li.jun@sjtu.edu.cn
联系电话：

从事专业： 材料科学与工程
学习与工作简历：
2019.12-至今 上海交通大学，副教授
2018.08-2020.07英国莱斯特大学，工程学院，博士后、Senior Research Fellow
2013.12-2019.12上海交通大学，材料科学与工程学院，讲师
2013.08-2013.12奥地利莱奥本大学，博士后

2010.09-2013.07奥地利莱奥本大学，博士
2007.09-2009.12大连理工大学，材料科学与工程学院，硕士
2003.09-2007.07 大连理工大学，材料科学与工程学院，学士


研究方向一 材料加工过程的物理模拟及数据驱动模拟，主要包括枝晶生长、宏观偏析等缺陷的预测、多物理场/多相耦合建模、机器学习在材料加工中的应用
研究方向二 凝固过程控制，主要包括大型铸件的均质化控制、磁致能量转换功能材料
研究情况 近年来，主要从事1）材料加工过程的数值模拟研究，包括多物理场/多相耦合技术，尤其是凝固过程的宏观偏析模拟预测方面；2）大型铸锭的均质化控制；3）磁致形状记忆及磁制冷功能材料制备方面的研究；4)基于数据驱动的材料加工与模拟。
先后承担或作为主要负责人参与国家自然基金重点项目，科技部重点研发计划以及国家两机重大专项等多项国家重大重点项目。与英国莱斯特大学、奥地利莱奥本大学、美国爱荷华大学等国外高校；宝钢、中广核、上重、鞍钢、隆基硅等国内行业重点企业有长期合作关系。担任Int. Heat Mass Trans., J. Mater. Proc. Technol., J. Alloys Comp., Metall. Mater. Trans. A等多家杂志的特约审稿人。在本领域知名国际期刊Acta Mater., Metall. Mater. Trans. A, I J. Mater. Proc. Technol.等上发表SCI论文60余篇。
讲授主要课程 Mechanical Behavior of Materials,工程学导论
教学研究
代表性论文、论著 1. FL Ren,J Li*, HH Ge, DX Cai, QD Hu, JG Li, A comprehensive study of layer casting process by a four-phase filling-solidification model, Journal of Materials Processing Technology, 2020,284, 116737
2. N Ren,J Li*, N Bogdan, M Xia, J Li, Simulation of dendritic remelting and fragmentation using coupled cellular automaton and Eulerian multiphase model, Computational Materials Science,2020, 180, 109714
3. ZN Zhou, H Akamine,J Li*, L Yang, T Higashizono, QD Hu, M Nishida,Tuning martensite transformation behavior and magneto-caloric effect in Ni44Mn36In14Co6 alloy through doping the fifth element Cu,Journal of Alloys and Compounds,2020,817, 153150
4. L Yang,J Li*, Z Zhou, R Zhang, D Tu, Q Hu, H Dong, J Li, Direct formation of La (Fe, Si) 13 phase with enhanced mechanical property of off-stoichiometric La1. 7Fe11. 6Si1. 4 alloys by directional solidification,Journal of Alloys and Compounds, **, 152694
5. J Li,J Li, O Renk, R Pippan, P Ghosh,Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy,Metall. Mater. Trans. A, 2020, 51 (1), 368-379
6. RY Zhang, HL Qin, ZN Bi,J Li, S Paul, TL Lee, SY Zhang, J Zhang,Evolution of Lattice Spacing of Gamma Double Prime Precipitates During Aging of Polycrystalline Ni-Base Superalloys: An In Situ Investigation,Metall. Mater. Trans. A, 2020, 51 (2), 574-585
7. RY Zhang, HL Qin, ZN Bi,J Li, S Paul, TL Lee, B Nenchev, J Zhang,Using Variant Selection to Facilitate Accurate Fitting ofγ″ Peaks in Neutron Diffraction,Metall. Mater. Trans. A,2019, 50 (11), 5421-5432
8. Yongsheng Fu,Jun Li*, Jianguo Li, Photo-improved hydrogen evolution reaction activity of the Pt/CdS electrocatalyst,Prog. Nat. Sci.: Mater. Int., 2019, 29(4), 379
9. D Cai, F Ren, H Ge, HS Kim,J Li*, J Li,Modelling of Inclusion Effects on Macrosegregation in Solidifying Steel Ingot with a Multi-phase Approach,Metall. Mater. Trans. A, 2019, 50 (3), 1323-1332
10. Y Fu,J Li*, J Li,Metal/semiconductor nanocomposites for photocatalysis: fundamentals, structures, applications and properties,Nanomaterials,2019, 9 (3), 359
11. L Yang, Z Zhou, S Feng,J Li*,J Liu, J Li, Q Hu, J Li,Microstructure and magnetic property of LaFe11. 6Si1. 4 magnetocaloric alloys by a novel short time heat treatment, 2019,Intermetallics105, 1-5
12. Y Ouyang, M Zhang,J Li, A Yan, J Liu, A high-throughput study of magnetocaloric materials: Gradient solidification applied to La-Fe-Si, 2019, Intermetallics108, 100-108
13. LI J., Xia M. X., Hu Q. D., Li J. G.*, Solutions in improving homogeneities of heavy ingots,Acta Metall. Sin., 2018, 54 (5), 773-788
14. F Ren, H Ge, D Cai,J Li*, Q Hu, M Xia, J G Li，Simulation of Macrosegregation and Shrinkage Cavity in an Al-4.5 Wt Pct Cu Ingot Using a Four-Phase Model,Metall. Mater. Trans. A, 2018 49 (12), 6243–6254
15. H Ge, F Ren, D Cai, J Hao,J. Li*, J G Li, Gradual-cooling solidification approach to alleviate macrosegregation in large steel ingots,J. Mater. Proc. Technol., 2018, 262, 232-238
16. Z. N. Zhou, L. Yang, R. C. Li,J. Li*, Q. D. Hu, J. G. Li, Martensite transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg shape memory alloys,Prog. Nat. Sci.: Mater. Int., 2018, 1, 60-65,
17.LI J.*, WANG J., REN F. L., GE H. H., HU Q. D., XIA M. X., LI J. G., Experimental and numerical simulation study on layer casting method for composition homogeneity on ingot casting,Acta Metall. Sin., 2018, 1, 118-128,
18. H. Ge, F. Ren,J. Li*, Q. Hu, M. Xia, J. G. Li, Modelling of ingot size effects on macrosegregation in steel castings,J. Mater. Proc. Technol., 2018, 252,362-369
19. ZN Zhou, L. Yang, RC Li,J. Li*, QD Hu, JG Li, Martensitic transformations and kinetics in Ni-Mn-In-Mg shape memory alloys,Intermetallics, 2018, 92, 49-54
20. Mingqin Xu, Lu Wang, Wenquan Lu, Long Zeng, Hari-Babu Nadendla, Yun Wang, Jun Li, Qiaodan Hu, Mingxu Xia, Jianguo Li,The Nucleation Potency ofIn Situ-Formed Oxides in Liquid Iron,Metall. Mater. Trans. A,2018, 49 (5), 1762-1769
21.Liu J.,Li J.,Hage F.S.,Li J.*,Ramasse Q.,Schumacher P.,Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure,Acta Mater., 2017, 131, 169-186
22. Q. Hu, Z. Zhou, L. Yang, Y. Huang,J. Li*, J. G. Li,On the Driving Forces of Magnetically Induced Martensitic Transformation in Directionally Solidified Polycrystalline Ni-Mn-In Meta-Magnetic Shape Memory Alloy with Structural Anisotropy,Metall. Mater. Trans. A, 2017, 48(11), 5480–5491
23.Yang L.,Zhou Z.,Qian J., Ge X.Li J.*,Hu Q.,Li J.G.,Peritectic Solidification Path of the La(Fe,Si)13Phase in Dual-Phase Directionally Solidified La-Fe-Si Magnetocaloric Alloys,Metall. Mater. Trans. A, 2017, 48(9), 4229-4236
24.Ren F.L.,Wang J.G.,Ge H.H.,Li J.*,Xia M.X.,Li J.G.,A Homogeneous Billet Layer Casting Fabrication Method,Metall. Mater. Trans. A, 2017, 48 (10), 4453-4457
25.Ge H.,Ren F.,Li J.*, Han X.,Xia M.,Li J.G.,Four-Phase Dendritic Model for the Prediction of Macrosegregation, Shrinkage Cavity, and Porosity in a 55-Ton Ingot,Metall. Mater. Trans. A, 2017,48(3),1139-1150
26. Hu Q., Yang L., Zhou Z., Huang Y.,Li J.*, Li J. G. Orientation relationship between magnetic domains and twins in Ni52Fe17Ga27Co4, magnetic shape memory alloy,Metall. Mater. Trans. A, 2017, 48(6), 2675-2681.

27. Fu Y. S., Zhang W., Xu X.,Li J. *, Li J., Xia M., J. G. Li, A novel heat treatment process for surface hardening of steel: metal melt surface hardening,Metall. Mater. Trans. A, 2017,48(9), 3975-3979.
28. Zhou Z. N., Yang L., Wang J. G., Jin T., Huang Y.,Li J. *, Hu Q., Li J. G., Internal friction behaviors of ni-mn-in magnetic shape memory alloy with two-step structural transformation,Prog. Nat. Sci.: Mater. Int.,2017, 27(3), 356
29. YW Luan, CH Li, D. Zhang,J. Li, XJ Han*, JG Li,Plastic deformation mechanisms and size effect of Cu 50 Zr 50/Cu amorphous/crystalline nanolaminate: A molecular dynamics study,Comp. Mater. Sci., 2017, 129, 137-146
30. Li J.,Ge H.,Wu M.*,Ludwig A.,Li J.G.,A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement,Acta Metall. Sin.2016, 52(9), 1096-1104
31. Ge H.,Li J.*,Han X.,Xia M.,Li J.G.,Dendritic model for macrosegregation prediction of large scale castings,J. Mater. Proc. Technol., 2016, 227,308-317
更多信息请点以下链接查询
https://scholar.google.com/citations?user=fxckNXoAAAAJ&hl=EN


毕业博士生数 4人（合作指导）
毕业硕士生数 1人（另有合作指导2名）
参加学术团体、任何职务
申请专利 授权专利4项
荣誉和奖励
2018上海交通大学“晨星-优秀青年****奖励计划”
2016年上海交通大学“优秀班主任”
2014年上海市“浦江人才”支持计划


其他