删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

上海交通大学船舶海洋与建筑工程学院导师教师师资介绍简介-李海汀

本站小编 Free考研考试/2021-01-01


李海汀 土木工程系
电子邮件:haiting.li@sjtu.edu.cn
通讯地址:上海市闵行区东川路800号上海交通大学木兰船建大楼B518室



个人简历 研究方向 学术兼职 科研项目 代表性论文及专著 荣誉和奖励
2019.10 – 今:上海交通大学 船舶海洋与建筑工程学院 助理教授 博士生导师
2018.10 – 2019.10:新加坡南洋理工大学 土木与环境工程学院 博士后
2017.09 – 2018.10:香港大学 土木工程系 博士后
2013.09 – 2017.09:香港大学 土木工程系 博士


钢结构稳定和抗火,不锈钢结构,高强钢结构,钢-混组合结构,钢桥结构


美国土木工程师协会(ASCE) Structural Members Committee委员
第六届International Conference on Applications of Structural Fire Engineering组委会成员
国际桥梁与结构工程协会(IABSE)会员
多份SCI期刊特约审稿人,部分如下:
Journal of Structural Engineering, ASCE
Engineering Structures, ELSEVIER
Journal of Constructional Steel Research, ELSEVIER
Thin-Walled Structures, ELSEVIER
Structures, ELSEVIER
Construction and Building Materials, ELSEVIER
Applied Ocean Research, ELSEVIER
Advances in Structural Engineering, SAGE


香港研究资助局优配研究金项目(GRF **), Cold-formed high strength steel hollow section joints under axial compression, 2019.1-2021.12, 合作研究者(Co-Investigator)
新加坡国家发展部土地和宜居性国家创新挑战项目(L2NICCFP1-2013-4), Life safety and structural fire safety of mega underground caverns in Singapore, 2018.10-2019.10, 参加
新加坡JTC工业基础设施创新中心项目(M**), The behaviour and design of innovative composite concrete-steel structural system, 2018.10-2019.10, 参加
香港研究资助局优配研究金项目(GRF **), Cold-formed high strength steel structural members, 2015.1-2018.6, 参加
香港研究资助局优配研究金项目(GRF HKU718612E), Cold-formed stainless steel bolted connections at elevated temperatures, 2013.9-2016.5, 参加
交通部西部交通建设科技项目 (201**), 在役公路钢桥疲劳寿命预测方法研究, 2011.9-2013.6, 参加
国家自然科学基金面上项目(**), 正交异性钢桥面板疲劳机理与剩余寿命评估方法研究, 2010.9-2011.12, 参加


期刊论文
13. Li, H.-T., and Young, B. (2019). “Cold-formed high-strength steel tubular structural members under combined bending and bearing.” ASCE Journal of Structural Engineering, 145(8): **. (交大A档SCI)
12. Li, H.-T., and Young, B. (2019). “Behaviour of cold-formed high strength steel RHS under localised bearing forces.” Engineering Structures, 183: 1049–1058. (交大A档SCI)
11. Li, H.-T., and Young, B. (2019). “Cold-formed high strength steel SHS and RHS beams at elevated temperatures.” Journal of Constructional Steel Research, 158: 475–485. (交大B档SCI)
10. Li, H.-T., and Young, B. (2018). “Residual mechanical properties of high strength steels after exposure to fire.” Journal of Constructional Steel Research, 148: 562–571. (交大B档SCI)
9. Li, H.-T., and Young, B. (2018). “Web crippling of cold-formed ferritic stainless steel square and rectangular hollow sections.” Engineering Structures, 176: 968–980. (交大A档SCI)
8. Li, H.-T., and Young, B. (2018). “Design of cold-formed high strength steel tubular sections undergoing web crippling.” Thin-Walled Structures, 133: 192–205. (交大A档SCI)
7. Li, H.-T., and Young, B. (2018). “Design of concrete-filled high strength steel tubular joints subjected to compression.” Journal of Constructional Steel Research, 150: 209–220. (交大B档SCI)
6. Li, H.-T., and Young, B. (2018). “Experimental investigation of concrete-filled high-strength steel tubular X joints.” ASCE Journal of Structural Engineering, 144(10): **. (交大A档SCI)
5. Li, H.-T., and Young, B. (2017). “Tests of cold-formed high strength steel tubular sections undergoing web crippling.” Engineering Structures, 141: 571–583. (交大A档SCI)
4. Li, H.-T., and Young, B. (2017). “Cold-formed ferritic stainless steel tubular structural members subjected to concentrated bearing loads.” Engineering Structures, 145: 392–405. (交大A档SCI)
3. Li, H.-T., and Young, B. (2017). “Material properties of cold-formed high strength steel at elevated temperatures.” Thin-Walled Structures, 115: 289–299. (交大A档SCI)
2. Wang, C.-S., Yen, B.T., Li, H.-T., and Lan, D. (2015). “Fatigue life evaluation of in-service steel bridges by using bi-linear S-N curves.” Advanced Steel Construction, 11: 269–282. (SCI)
1. Wang, C.-S., Zhai, M.-S., Li, H.-T., Ni, Y.-Q., and Guo, T. (2015). “Life-cycle cost based maintenance and rehabilitation strategies for cable supported bridges.” Advanced Steel Construction, 11: 395–410. (SCI)

会议论文
17. Li, H.-T., and Young, B. (2019). “Cold-formed high strength steel RHS under combined bending and web crippling.” Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, Prague, Czech Republic. (Keynote Paper)
16. Li, H.-T., and Young, B. (2018). “Web crippling of cold-formed high strength steel square and rectangular hollow sections under two-flange loading conditions.” Proceedings of the Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures, St. Louis, USA.
15. Li, H.-T., and Young, B. (2018). “Cold-formed ferritic stainless steel tubular sections under end-one-flange loading condition.” Proceedings of the Wei-Wen Yu International Specialty Conference on Cold- Formed Steel Structures, St. Louis, USA.
14. Li, H.-T., and Young, B. (2018). “Ferritic stainless steel tubular sections under concentrated bearing force: experimental investigation, numerical modelling and design.” Proceedings of the 10th Mainland, Taiwan and Hong Kong Symposium on Steel Construction, Hangzhou, China. (Keynote Paper)
13. Li, H.-T., and Young, B. (2018). “Post-fire mechanical properties of high strength steels.” Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures, Valencia, Spain. (Keynote Paper)
12. Li, H.-T., and Young, B. (2018). “Design of concrete-filled high strength steel tubular X-joints subjected to compression.” Proceedings of the 12th International Conference on Advances in Steel- Concrete Composite Structures, Valencia, Spain.
11. Li, H.-T., and Young, B. (2017). “Design of ferritic stainless steel tubular sections subjected to concentrated bearing load.” Proceedings of the 16th International Symposium on Tubular Structures, Melbourne, Australia.
10. Li, H.-T., and Young, B. (2017). “Tests of concrete-filled high strength steel tubular X-joints.” Proceedings of the 16th International Symposium on Tubular Structures, Melbourne, Australia.
9. Li, H.-T., and Young, B. (2017). “Behaviour of cold-formed high strength steel under transient state tests.” Proceedings of the 9th Mainland, Taiwan and Hong Kong Symposium on Steel Construction, Hong Kong, China. (Keynote Paper)
8. Li, H.-T., and Young, B. (2016). “Web crippling of cold-formed high strength steel tubular sections under one-flange loading conditions.” Proceedings of the 8th International Conference on Steel and Aluminum Structures, Hong Kong, China.
7. Li, H.-T., and Young, B. (2016). “Mechanical properties of cold-formed high strength steel at elevated temperatures.” Proceedings of the 6th International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa. (Invited Paper)
6. Li, H.-T., and Young, B. (2015). “Tests of cold-formed high strength steel tubular sections under concentrated bearing load.” Proceedings of the 8th International Conference on Advanced in Steel Structures, Lisbon, Portugal.
5. Li, H.-T., and Young, B. (2015). “Web crippling tests of cold-formed ferritic stainless steel tubular sections under two-flange loading.” Proceedings of the 8th International Conference on Advanced in Steel Structures, Lisbon, Portugal.
4. Li, H.-T., and Young, B. (2015). “Experimental investigation of cold-formed high strength steel tubular sections undergoing web crippling.” Proceedings of the 15th International Symposium on Tubular Structures, Rio de Janeiro, Brazil.
3. Wang, C.-S., Yen, B.T., and Li, H.-T. (2012). “Fatigue life evaluation of in-service steel bridges by using bi-linear S-N curves.” Proceedings of the 1st International Conference on Performance-based and Life-cycle Structural Engineering, Hong Kong, China.
2. Wang, C.-S., and Li, H.-T. (2012). “Cable supported bridge maintenance and rehabilitation strategy based on life-cycle cost.” Proceedings of the 1st International Conference on Performance-based and Life-cycle Structural Engineering, Hong Kong, China.
1. Wang, C.-S., Li, H.-T., and Ren, G.-F. (2012). “Innovative design and applications of U-shaped girder in bridge engineering.” Proceedings of the 7th International Conference on Advanced in Steel Structures, Nanjing, China.


2018年获 国际期刊Journal of Constructional Steel Research杰出审稿人荣誉称号
2017年获 香港大学杰出助理教师奖
2016年获 香港大学杰出助理教师奖
2015年获 中国公路学会科学技术二等奖
2013年获 香港大学博士生全额奖学金
2012年获 硕士研究生国家奖学金
2008年获 本科生国家奖学金





相关话题/船舶 上海交通大学