删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Electroplating delivers high-energy, high-power batteries_上海硅酸盐研究所

上海硅酸盐研究所 免费考研网/2018-05-05


An electron micrograph cross-section shows aluminum foil plated with lithium cobalt oxide, a common material in lithium-ion batteries. Credit: Image courtesy of Hailong Ning and Jerome Davis III, Xerion Advanced Battery Corp.  The process that makes gold-plated jewelry or chrome car accents is now making powerful lithium-ion batteries.


  Researchers at the University of Illinois, Xerion Advanced Battery Corporation and Nanjing University in China developed a method for electroplating lithium-ion battery cathodes, yielding high-quality, high-performance battery materials that could also open the door to flexible and solid-state batteries.

  "This is an entirely new approach to manufacturing battery cathodes, which resulted in batteries with previously unobtainable forms and functionalities," said Paul V. Braun, a professor of materials science and engineering and director of the Frederick Seitz Materials Research Lab at Illinois. He co-led the research group that published its findings in the journal Science Advances.

  Traditional lithium-ion battery cathodes use lithium-containing powders formed at high temperatures. The powder is mixed with gluelike binders and other additives into a slurry, which is spread on a thin sheet of aluminum foil and dried. The slurry layer needs to be thin, so the batteries are limited in how much energy they can store. The glue also limits performance.




The electroplating method could enable flexible, three-dimensional battery designs. This plated aluminum foil rolled up without cracking. Credit: Image courtesy of Hailong Ning and Jerome Davis III, Xerion Advanced Battery Corp.

  "The glue is not active. It doesn't contribute anything to the battery, and it gets in the way of electricity flowing in the battery," said co-author Hailong Ning, the director of research and development at Xerion Advanced Battery Corporation in Champaign, a startup company co-founded by Braun. "You have all this inactive material taking up space inside the battery, while the whole world is trying to get more energy and power from the battery."

  The researchers bypassed the powder and glue process altogether by directly electroplating the lithium materials onto the aluminum foil.

  Since the electroplated cathode doesn't have any glue taking up space, it packs in 30 percent more energy than a conventional cathode, according to the paper. It can charge and discharge faster as well, since the current can pass directly through it and not have to navigate around the inactive glue or through the slurry's porous structure. It also has the advantage of being more stable.

  Additionally, the electroplating process creates pure cathode materials, even from impure starting ingredients. This means that manufacturers can use materials lower in cost and quality and the end product will still be high in performance, eliminating the need to start with expensive materials already brought up to battery grade, Braun said.




Electroplating can be applied to textured, three-dimensional or flexible substrates, opening the door to new battery designs. The right side of this quarter was plated with lithium cobalt oxide. Credit: Hailong Ning and Jerome Davis III, Xerion Advanced Battery Corp.

  "This method opens the door to flexible and three-dimensional battery cathodes, since electroplating involves dipping the substrate in a liquid bath to coat it," said co-author Huigang Zhang, a former senior scientist at Xerion who is now a professor at Nanjing University.
  The researchers demonstrated the technique on carbon foam, a lightweight, inexpensive material, making cathodes that were much thicker than conventional slurries. They also demonstrated it on foils and surfaces with different textures, shapes and flexibility.

  "These designs are impossible to achieve by conventional processes," Braun said. "But what's really important is that it's a high-performance material and that it's nearly solid. By using a solid electrode rather than a porous one, you can store more energy in a given volume. At the end of the day, people want batteries to store a lot of energy."

  Explore further: Cathode material with high energy density for all-solid lithium-ion batteries

  More information: "Electroplating lithium transition metal oxides" Science Advances (2017). DOI: 10.1126/sciadv.1602427 , http://advances.sciencemag.org/content/3/5/e1602427 



  Journal reference: Science Advances
相关话题/

  • 领限时大额优惠券,享本站正版考研考试资料!
    大额优惠券
    优惠券领取后72小时内有效,10万种最新考研考试考证类电子打印资料任你选。涵盖全国500余所院校考研专业课、200多种职业资格考试、1100多种经典教材,产品类型包含电子书、题库、全套资料以及视频,无论您是考研复习、考证刷题,还是考前冲刺等,不同类型的产品可满足您学习上的不同需求。 ...
    本站小编 Free壹佰分学习网 2022-09-19