王小惠教授
王小惠，教授，西安交通大学工学学士、硕士，上海交通大学工学博士。2004.8-2015.9在上海交通大学从事教学和科研工作；2015.8-2017.8以玛丽-居里****（Marie-Curie Research Fellow）在英国Heriot-Watt大学工作；2018年4月入职上海海事大学。国家自然科学基金评审专家、捷克科学基金（Czech Science Foundation）评审专家、教育部学位与研究生教育发展中心评审专家。先后以项目第一负责人主持两项国家自然科学基金项目和一项欧盟MARIE Sk?odowska-CURIE ACTIONS—Horizon 2020项目；以项目第一负责人主持上海市国际科技合作基金项目一项；以项目第二负责人参与国家自然科学基金项目一项；以项目骨干研究人员参与国家重点基础研究发展规划项目（973计划）一项；以项目主要执行人参与COIN Project 3-3.5项目一项和FRP相关项目二项。公开发表学术论文40多篇，其中第一作者/通讯作者SCI检索论文22篇。主要研究方向为港口、海岸及近海水工构筑物在海洋环境-荷载作用下的腐蚀防护、全生命周期服役性能评估；FRP修复港口、海岸及近海损伤水工构筑物。
工作经历
2018年4月—至今：上海海事大学，海洋科学与工程学院，港口航道与海岸工程系，教授
2015年8月—2017年8月：Heriot-Watt University, Edinburgh, UK，玛丽-居里****（Marie-Curie Research Fellow，Individual Fellowships）
2012年3月—2015年9月：上海交通大学，船舶海洋与建筑工程学院，土木工程系，副教授
2011年3月—2012年3月：Research Associate, Department of Civil & Structural Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong, P.R. China
2008年8月—2011年3月：上海交通大学，船舶海洋与建筑工程学院，土木工程系，副教授
2007年9月—2008年8月：Visiting scholar, Department of Structural Engineering,NorwegianUniversity of Science and Technology, Norway
2005年8月—2007年9月：上海交通大学，船舶海洋与建筑工程学院，土木工程系，副教授
2004年8月—2005年8月：上海交通大学，船舶海洋与建筑工程学院，土木工程系，讲师
2000年4月—2001年2月：上海师范大学，建工系，讲师
1998年4月—2000年4月：上海师范大学，建工系，助教
教育经历
2001年2月—2004年7月：博士，上海交通大学，建筑工程与力学学院，固体力学
1995年9月—1998年4月：硕士，西安交通大学，建工系，结构工程
1991年9月—1995年7月：学士，西安交通大学，建工系，工业与民用建筑
研究项目
主持项目
1. 基于全寿命周期的海洋环境下不锈钢筋混凝土构件服役寿命预测和总成本分析：上海市国际科技合作基金项目（编号：**；资助金额：30万元；执行时间：2018.10-2021.9），项目负责人
2.不锈钢筋提升海水海砂混凝土耐久性能研究：上海海事大学引进人才科研启动研究课题（资助金额：10万元；执行时间：2018.4-2020.12），项目负责人
3.“Climate-resilient pathways for the development of concrete infrastructure: adaptation, mitigation and sustainability (ClimatCon)”：欧盟MARIE Sk?odowska-CURIE ACTIONS —Horizon 2020的玛丽-居里奖学金（Marie-Curie Individual Fellowships）资助（资助金额：195,455欧元；执行时间：2015.8-2017.8）
4. 疲劳荷载和环境耦合作用下服役配环氧涂层钢筋混凝土构件耐久性性能：国家自然科学基金项目（项目批准号：**；资助金额：58万元；执行时间：2012.1-2015.12）
5. 局部区段锈蚀的钢筋混凝土构件承载力的研究：国家自然科学基金项目（项目批准号：**；资助金额：24万元；执行时间：2006.1-2008.12）
参与项目
1. 考虑功能蜕化的重大工程结构在地震作用下破坏过程与控制方法：国家重点基础研究发展规划项目（973计划）资助项目（编号2002CB412709）
2. 混凝土中钢筋开始腐蚀条件的研究：国家自然科学基金项目（执行时间：2008.1-2010.12）
3. COIN Project 3-3.5：中－挪政府互换项目，与挪威科技大学结构工程系的Stefan Jacobsen教授合作进行COIN（Concrete Innovation Centre）Project 3—Nanotechnology applied to Cement-based Materials中混凝土或砂浆中界面过渡区粘结性能的研究
4.在香港理工大学土木与结构工程系承担以下项目研究：
1）Durability of Bond between FRP and Concrete Exposed to a Humid Subtropical Environment: experimental study and predictive modeling (RGC项目)
2）Durability of FRP-confined Concrete Columns in Humid Subtropical Marine Environments
发表的主要学术论文
英文期刊文章
[1] X-H Wang,D. V. Val, L. Zheng, M. R. Jones, Carbonation of loaded RC elements made of different concrete types: Accelerated testing and future predictions, Construction and Building Materials, 2020, 243, 118259, https://doi.org/10.1016/j.conbuildmat.2020.118259
[2] X-H Wang,Li Zheng, Durability and ultimate performance of concrete beams with epoxy-coated reinforcing bars,Proceedings of the Institution of Civil Engineers – Structures and Buildings, https://doi.org/10.1680/jstbu.19.00156, 2020
[3] A B H Kueh, X-H Wang, Y Chen, S-J Gui, Contesting crack modesmodeling of reinforced concrete structure threatened by the progressive rust expansion in rebars in the presence of external load, Construction and Building Materials, 263, 2020, 120127, https://doi.org/10.1016/j.conbuildmat.2020.120127
[4] H M Imounga, E Bastidas-Arteaga, R M Pitti, S E Ango, X-H Wang,Bayesian assessment of the effects of cyclic loads on the chloride ingress process into reinforced concrete, Apply Science, 2020, 10, 2040; doi:10.3390/app**
[5] X-H Wang, L Zheng, Effect of different pre-exposure loading on chloride penetration in reinforced concrete specimens,International Journal of Civil Engineering, 2019, 17(7): 1075–1094
[6] X-H Wang, B. Chen, P.Tang, Experimental and analytical study onbond strength of normal uncoated and epoxy-coated reinforcing bars, Construction and Building Materials, 2018, 189: 612-628
[7] X-H Wang,Dimitri V. Val, Li Zheng, M. Roderick Jones, Influence of loading and cracks on carbonation of RC elements made of different concrete types, Construction and Building Materials, 2018, 164: 12~28
[8] X-H Wang,Emilio Bastidas-Arteaga, Yang Gao, Probabilistic analysis of chloride penetration in reinforced concrete subjected to pre-exposure static and fatigue loading and wetting-drying cycles, Engineering Failure Analysis, 2018; 84: 205–219
[9] X-H Wang, Y Gao, R-D Gao, J Wang, X-L Liu, Influence of different fatigue loadsand coating thicknesses on service performance of RC beam specimens with epoxy-coated reinforcement, Computers and Concrete, 2017; 19(3): 243-256
[10]X-H Wang, Y Gao. Corrosion behavior of epoxy-coated reinforced bars in RC test specimens subjected to pre-exposure loading and wetting-drying cycles. Construction and Building Materials, 2016; 119: 185-205
[11]X-H Wang, B Chen, Y Gao, J Wang, L Gao. Influence of external loading and loading type on corrosion behavior of RC beams with epoxy-coated reinforcements. Construction and Building Materials, 2015; 93(15): 746-765
[12]X-H Wang, X-L Liu, Analysis of RC beam with unbonded or exposed tensile steel reinforcements and defective stirrup anchorages for shear strength, Computers and Concrete, 2012, 10(1), 59-78.
[13]X-H Wang, B Li, X-H Gao, X-L Liu, Shear behaviour of RC beams with corrosion damaged partial length, Materials and Structures, 2012, 45(3), 351–379.
[14]X-H Wang, X-H Gao, B Li, B-R Deng, Effect of bond and corrosionwithin partial length on shear behaviour and load capacity of RC beam, Construction and Building Materials, 2011, 25(4), 1812-1823.
[15]X-H Wang, SJacobsen, S FLee, J Y He, Z L Zhang, Effect of silica fume, steel fiber and ITZ on the strength and fracture behavior of mortar, Materials and Structures, 2010,43(1-2), 125-139.
[16]X-H Wang, X-L Liu, Simplified methodologyfor the evaluation of the residual strength of corroded reinforced concrete beams, Journal of Performance for Constructed Facilities, 2010, 24(2), 108-119.
[17]X-H Wang, X-L Liu,Predictingthe flexural capacity of RC beam with partially unbonded steel reinforcement, Computers and Concrete, 2009, 6(3), 235-252.
[18]X-H Wang, SJacobsen, J Y He, Z L Zhang, S FLee,H L Lein, Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar, Cement and Concrete Research, 2009, 39(8), 701-715.
[19]X-H Wang,F-Y Liang, Performanceof RC columns with partial length corrosion, Nuclear Engineering and Design, 2008, 238(12), 3194-3202.
[20]X-H Wang,X-L Liu, Bondstrength modeling for corroded reinforcements, Construction and Building Materials, 2006, 20(3), 177-186.
[21]X-H Wang, X-L Liu, Modelling effectsof corrosion on cover cracking and bond in reinforced concrete, Magazine of Concrete Research, 2004, 56(4), 191-199.
[22]X-H Wang, X-L Liu, Modeling bond strength of corroded reinforcement without stirrups, Cement and Concrete Research, 2004, 34(8), 1331-1339.
[23]X-H Wang, X-L Liu, Bond strength modeling for corroded reinforcement in reinforced concrete, Structural Engineering and Mechanics, 2004, 17(6), 863-878.
[24]X-H Wang,X-L Liu, A strain-softening model for steel–concrete bond, Cement and Concrete Research, 2003,33(10), 1669-1673.
[25]X-H Wang, X-L Liu, B-R Deng,Effects of length and location of steel corrosion on the behavior and load capacity of RC columns, Journal of Shanghai Jiaotong Uni.(English Edition), 2012, 17(4), 391-400.
[26]X-H Wang, X-L Liu, Modeling the flexural carrying capacity of corroded RC beams, Journal of Shanghai Jiaotong Uni.(English Edition), 2008, 13(2), 129-135.
[27]X-D Dai, X-H Wang, X-J Kou, Bond behavior of corroded reinforcement in concrete wrapped with carbon fiber reinforced polymer under cyclic loading, Journal of Shanghai Jiaotong Uni.(English Edition), 2013, 18(3), 271-277.
[28]S FLee, X-H Wang, SJacobsen,Mix design and the effect of silica fume and steel fiber on rheological and mechanical properties of mortars, Nordic Concrete Research, 2010, 41(1), 33-50.
英文国际会议文章
[29]X-H Wang, D Val, Influence of pre-exposure fatigue loading on chloride penetration in concrete specimens with epoxy-coated reinforcement, Proceedings of the 9th International Concrete Conference 2016Environment, Efficiency and Economic Challenges for Concrete, 4-6 July 2016, Dundee, Scotland, UK, 789-804
[30]X-H Wang, J Jiang,Evaluating load capacity and failure mode of the RC beam under coupled external loads and environment attacks, Proceedings of the Seventh International Conference on Concrete under Severe Conditions – Environment and Loading, Edited by Z.J. Li, W. Sun, C. W. Miao, K. Sakai, O.E.Gj?rv& N. Banthia, Sept.2013, Vol.2,1055-1064.
[31]S F Lee, J Y He, X-H Wang, Z L Zhang, S Jacobsen, Study of P-h Curves on Nanomechanical Properties of Steel Fiber Reinforced Mortar, In: 3rd International Symposium on Nanotechnology in Construction, Prague, Czech Republic, MAY 31-JUN 02, 2009, 281-286.
[32]X-H Wang, Modeling the flexural capacity of reinforced concrete beam with partially unbonded length, In: International Conference on Durability of Concrete Structures, 26-27 November, 2008, Zhejiang University, Hangzhou, China, 896-902.
[33]X-H Wang,X-L Liu, Modeling bond strength of corroded reinforcement with confinement stirrups, In: International Conference on Durability of Concrete Structures, 26-27 November, 2008, Zhejiang University, Hangzhou, China, 903-908.
中文EI期刊文章
[34]王小惠，梁发云，刘西拉，局部区段锈蚀的钢筋混凝土柱承载力试验研究，上海交通大学学报（理工版），Vol.43，No.6，2009，999-1004,
[35]王小惠，刘西拉，锈蚀钢筋混凝土梁的斜截面抗剪承载能力，上海交通大学学报（理工版），Vol.41，No.6，2007，944-949，
[36]郭德发，王小惠，非线性滞变体系的随机地震反应及动力可靠性分析,西安交通大学学报（理工版），Vol.33，No.4，1999，65-68，
编委和审稿
[1]"Advances in Concrete Construction (ACC), An International Journal"编委
[2]Journal of Structural Engineering，审稿人
[3]Construction and Building Materials，审稿人
[4]Computers and Concrete, An international Journal，审稿人
[5]Structure and Infrastructure Engineering，审稿人
[6]Advances in Structural Engineering，审稿人
[7]Engineering Structures，审稿人
[8]Journal of Performance of Constructed Facilities，审稿人
荣誉、获奖情况
[1]2015年2月获欧盟MARIE Sk?odowska-CURIE ACTIONS —Horizon 2020玛丽-居里奖学金（Marie-Curie Individual Fellowships）
[2]中国-挪威政府奖学金2007/2008
专利
[1]王小惠，陈瑜，桂世杰，一种用于纳米压痕研究钢纤维水泥基材料中界面过渡区性能的试样制备方法，F190754，实审中
[2]代晓东，寇新建，高新科，王小惠，杨京俊，一种钢筋与混凝土粘结力测试装置，公开号：CNA
[3]代晓东，寇新建，王小惠，杨京俊，吴雪萍，一种带有箍筋的钢筋与混凝土粘结力测试装置，公开号：CNA