姓名：李平教授、博士生导师
地址：华东理工大学十六楼805室
座机：
手机号：**
Email：liping_2007@ecust.edu.cn

【个人简介】
2002-2006，波尔图大学，化学工程，博士
1985-1988，大连理工大学，化学工程，硕士
1981-1985，大连理工大学，化学工程，学士

【所获荣誉】
上海市浦江人才

【研究方向】
分离与反应耦合过程，吸附基础理论与应用，先进的模拟移动床技术应用，变压吸附应用，手性药物分离，微生物浸矿等应用，二氧化碳、甲烷以及有机挥发物的吸附捕集回收。

【承担项目】
近年来主持和负责承担的项目情况:
国家自然科学基金：吸附剂协同作用的梯度模拟移动床提取卤水中硼锂的应用基础研究，2018-2021
国家自然科学基金：二氧化碳置换模拟移动床吸附浓缩低浓度煤层气甲烷的研究，2017-2019
政府间国际科技创新合作重点专项：气相模拟移动床技术高效吸附分离甲烷与氮气，2017-2019
国家自然科学基金：面向手性化合物分离的模拟移动床异步控制基础研究，2013-2016

【主要成果】
申请的发明专利:
一种利用电解吸技术捕集二氧化碳的方法, 中国, ZL2.2
一种真空变压变温耦合吸附捕集烟道气中二氧化碳的方法,中国, ZL8.
多柱模拟移动床色谱技术连续分离氨鲁米特外消旋体的方法, 中国, 20**.8
一种模拟移动床吸附分离甲烷氮气制备高纯度甲烷的方法, 中国, 9.X

【近年来发表的代表性论文】
Ping Li ; Guohua Xiu; Rodrigues AE, Modelling Diffusion and Reaction for Inert-Core Catalyst in Batch and Fixed Bed Reactors, Can. J. Chem. Eng., 2019, 97: 217~225.
Tongyichao Qi; Ying Yang; Yijiang Wu; Jin Wang; Ping Li ; Jianguo Yu, Sorption-enhanced methanol steam reforming for hydrogen production by combined copper-based catalysts with hydrotalcites, Chemical Engineering & Processing: Process Intensification, 2018, 127: 72~82
Qu DL; Yang Y; Lu K; Yang L; Li P ; Yu JG; Ribeiro AM; Rodrigues AE, Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen, Adsorption, 2018, 24: 357~369.
Ying Yang; Yijiang Wu; Haiqing Liu; Ana M. Ribeiro; Ping Li ; Jianguo Yu; Alirio E. Rodrigues, Enrichment of ventilation air methane byadsorption with displacement chromatography technology: Experiment andnumerical simulation, Chemical Engineering Science, 2016, 149: 215~228.
Yijiang Wu; Ying Yang; Xiangming Kong; Ping Li ; Jianguo Yu; Ribeiro AM; Rodrigues AE, Adsorption of Pure and Binary CO2, CH4, and N2 GasComponents on Activated Carbon Beads., Journal of Chemical & Engineering Data, 2015, 60(9): 2684~2693.
Jiali Xiao; Shuying Sun ; Xingfu Song; ; Jianguo Yu, Ping Li, Lithium ion recovery from brine using granulatedpolyacrylamide–MnO2 ion-sieve., Chemical Engineering Journal, 2015, 279: 659~666
Ping Li ; Pedro Ferreira Gomes; José M. Loureiro; Alirio E Rodrigues , Chapter1. Proteins Separation and Purification by Expanded Bed Adsorption and Simulated Moving Bed Technology, Wiley-VCH Verlag GmbH & Co. KGaA, 2015
Rujin Gong; Xiaojian Lin; Ping Li ; Jianguo Yu, Adsorption equilibrium and kinetic study of guaifenesin enantiomers on cellulose tris3,5-dimethylphenylcarbamate packed column, Chemical Engineering Journal, 2014, 244(1): 128~136
Wu, Yi-Jiang; Li, Ping; Yu, Jian-Guo; Cunha, Adelino F. ; Rodrigues, Alirio E., Sorption-enhanced steam reforming of ethanol for continuous high-purity hydrogen production: 2D adsorptive reactor dynamics and process design, Chemical Engineering Science, 2014, 118: 83~93
Zhang, Mingming; Peng, Yunxiang; Sun, Yuzhu; Li, Ping ; Yu, Jianguo, Preparation of CaO–Al2O3 sorbent and CO2 capture performance at high temperature , Fuel, 2013, 111: 636~642.
Lu Wang; Ying Yang; Wenlong Shen; Xiangming Kong; Ping Li ; Jianguo Yu; Alirio E. Rodrigues, Experimental evaluation of adsorption technology for CO2 capture from flue gas in an existing coal-fired power plant , Chemical Engineering Science, 2013, 101: 615~619
Wang, Lu; Yang, Ying; Shen, Wenlong; Kong, Xiangming; Li, Ping ; Yu, Jianguo; Rodrigues, Alirio E., CO2 Capture from Flue Gas in an Existing Coal-Fired Power Plant by Two Successive Pilot-Scale VPSA Units , Industrial & Engineering Chemistry Research, 2013.6.12, 52(23): 7947~7955.
Wu, Y. -J.; Li, Ping; Yu, J. -G.; Cunha, A. F.; Rodrigues, A. E. , Sorption-enhanced steam reforming of ethanol on NiMgAl multifunctional materials: Experimental and numerical investigation , Chemical Engineering Journal, 2013, 231: 36~48
Shen, Chunzhi; Liu, Zhen; Li, Ping ; Yu, Jianguo, Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads , Industrial and Engineering Chemistry Research, 2012, 51(13): 5011~5021
Wang, Lu; Liu, Zhen; Li, Ping ; Yu, Jianguo; Rodrigues, Alirio E., Experimental and modeling investigation on post-combustion carbon dioxide capture using zeolite 13X-APG by hybrid VTSA process , Chemical Engineering Journal, 2012, 197: 151~161