刘勇
博士
副研究员
复合材料系
硕士生导师
；liuyong@dhu.edu.cn

·研究方向:
1.碳纤维增强树脂基复合材料
2. 碳纳米纤维以及特种无机纤维

指导研究生获得奖励：
2018年度：1人(研三)获得国家奖学金，1人(研三)获得综合奖学金；1人(研二)获得维凯奖学金
2019年度：1人（研三）获得研究生国家奖学金
·学习及工作经历:
2018/09-至今，东华大学，材料科学与工程学院复合材料系，副研究员
2014/02-2018/08，东华大学，材料科学与工程学院复合材料系，讲师
2008/09 - 2013/10，南京航空航天大学，材料科学与技术学院，博士
2004/09 - 2008/07，南昌大学，机电工程学院材料成型与控制工程专业，学士


·主讲课程：
复合材料力学

·主要论文：
1.Yong Liu, K. Chen, F. Dong, S. Peng, Y. Cui, C. Zhang, K. Han, M. Yu, H. Zhang, Effects of hydrolysis of precursor on the structures and properties of polymer-derived SiBN ceramic fibers, Ceramics International. 44(9) (2018) 10199-10203.
2.Yong Liu, Y. Cui, K. Han, et al. Microstructural and Mechanical Characterization of SiBNC Coated Carbon Fibers Prepared via PIP Method[J], Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018, 33: 783-787.
3.C. Zhang, Yong Liu*, Y. Cui, et al. Comparison of effects of nitrogen sources on the structures and properties of SiBNC ceramic fiber precursors[J], Ceramics International. 2018, 44: 14878-14883.
4.C. Zhang, Yong Liu*, Y. Cui, et al. Synthesis and Characterization of a Novel Preceramic Polymer for SiBNC Ceramic Fibers[J], Fibers and Polymers, 2018, 19: 956-964.
5.M. Jiang, Yong Liu*, C. Cheng, et al. Enhanced mechanical and thermal properties of monocomponent high performance epoxy resin by blending with hydroxyl terminated polyethersulfone[J], Polymer Testing., 2018, 69: 302-309.
6.Zhang CY, Han KQ*, Liu Yong*, Mou SW, Chang XF, Zhang H, et al. A novel high yield polyborosilazane precursor for SiBNC ceramic fibers[J]. Ceramics International. 2017,43(13): 10576-10580.
7.Liu Yong*, Peng S, Cui YJ, Chang XF, Zhang CY, Huang XH, et al. Fabrication and properties of precursor-derived SiBN ternary ceramic fibers[J]. Materials&Design. 2017,128:150-156.
8.Liu Yong*, Geng R, Cui YJ, Peng S, Chang XF, Han KQ, et al. A novel liquid hybrid precursor method via sol-gel for the preparation of ZrB2 films[J]. Materials&Design. 2017,128:80-85.
9.Mou SW, Liu Yong*, Han KQ, Yu MH*. Synthesis and characterization of amorphous SiBNC ceramic fibers[J]. Ceramics International. 2015,41(9):11550-11554.
10.Liu Yong, Jianxun Zhu, Zhaofeng Chen, et al. Mechanical behavior of 2.5D (shallow bend-joint) and 3D orthogonal quartzf/silica composites by silicasol-infiltration-sintering. Materials Science and Engineering: A, 2012, 532: 230-235.
11.Liu Yong, Zhaofeng Chen, Jianxun Zhu, et al. Comparison of 3D four-directional and five-directional braided SiO2f/SiO2 composites with respect to mechanical properties and fracture behavior. Materials Science and Engineering: A, 2012, 558: 170-174.
12.Liu Yong, Jianxun Zhu, Zhaofeng Chen, et al. Mechanical Behavior of 2.5D (shallow straight-joint) and 3D four-directional braided SiO2f/SiO2 composites. Ceramics International, 2012, 38(5):4245-4251.
13.Liu Yong, Jianxun Zhu, Zhaofeng Chen, et al. Mechanical properties and microstructure of 2.5D (shallow straight-joint) quartz fibers-reinforced silica composites by silicasol-infiltration-sintering. Ceramics International, 2012, 38(1): 795-800.
14.Liu Yong, J. Zhu, Z. Chen, C. Li and F. E. Boafo. Mechanical behaviour and microstructural characterization of 3D four-directional braided SiO2f/SiO2 composites. Fatigue & Fracture of Engineering Materials & Structures, 2012, 35(10): 953-961.

·近几年承担的科研项目：
[1](主持) 中央军委装备预研国防科技重点实验室基金(6**0)：2019.11-2021.10
[2](主持)国家自然科学基金青年基金(**)：2018.1-2020.12
[3](主持)中央高校自由探索项目(**D3-06)：2019.1-2021.12
[4](主持)上海市自然科学基金(15ZR**)：2015.1-2017.12
[5](主持)纤维材料改性国家重点实验室人才引进与培养基金：2014.05-2017.05
[6](参与)上海市科委重点项目(14JC**)：2014.09-2017.08
[7](参与)国家科技部重点研发计划(2017YFB**)：2017.07-2021.06


·其他：
开放，包容，奋斗！欢迎咨询报考本人研究生！期待有志于从事包括碳纤维增强树脂基复合材料、特种无机纤维及其复合材料研究的优秀青年学子加入课题组。