姓名：孙宝忠
职称：教授、博导
办公电话：
通讯地址：松江区人民北路2999号
电子邮箱：sunbz@dhu.edu.cn





主要经历
教学内容
研究成果
获奖荣誉
更多信息
主要经历

教学内容 研究方向
纺织材料与纺织品设计、纺织复合材料力学、纺织复合材料制备技术




研究成果 科研项目
(1) 上海市晨光计划项目：三维编织复合材料力学性能的应变率效应和破坏机理的频域研究，(批准号：08CG39)；（主持完成）

(2) 上海市青年科技启明星项目：三维编织复合材料在冲击加载下的频域破坏机理和结构稳定性，(批准号：08QA14008)；（主持完成）

(3) 国家自然科学基金：三维编织复合材料压缩性质应变率效应和破坏机理的频域研究(批准号：**) (主持完成)；

(4) 博士点基金新教师项目：三维正交机织复合材料在冲击加载下的应变率效应和频率响应特征(批准号：3) (主持完成)；

(5) 国家商用飞机制造工程技术研究中心项目：变截面三维编织异型整体复合材料树脂传递模塑(RTM)成型工艺研究(批准号：SAMC11-JS-07_219)（主持完成）；

(6) 国家自然科学基金：三维编织复合材料的冲击拉伸与破坏的多尺度分析（批准号：**）2011.1-2013.12（主持进行）；

(7) 全国优秀博士论文专项基金：织物组织弹道侵彻和优化设计（批准号：201056）2011.1-2014.12（主持进行）；

(8) 上海市青年科技启明星（跟踪）项目：三维编织复合材料低速冲击极限承载和细观结构优化设计（批准号：11QH**），2011.8-2013.7（主持进行）

(9) 上海市科学技术委员会高新处项目：新能源汽车典型结构件先进立体编织工艺与设备的开发（批准号：）2012.9-2015.8（参加进行）

(10) “863”计划项目：国产碳纤维汽车复合材料快速成型关键技术研究(批准号：2012AA03A206)2012.1-2014.12（参加进行）


代表论文
在Philosophical Magazine, Journal of Composite Materials, Composites [Part A and B], Composites Structures, AIAA Journal等国际期刊论文发表SCI收录论文58篇，接受发表11篇，发表国际会议论文12篇，由科学出版社出版专著1部。
1. Jin LM, Sun BZ, Gu BH. Cumulative fatigue damage for 3-D angle-interlock woven composite under three-point bending cyclic loading. Damage Mechanics, 2013, 22(1): 3-16

2. Wang P, Sun BZ, Gu BH. Comparisons of trapezoid tearing behaviors of uncoated and coated woven fabrics from experimental and finite element analysis, Damage Mechanics, 2013, 22(4): 464-489

3. Luan K, Sun BZ, Gu BH. Ballistic impact damages of 3-D angle-interlock woven composites based on high strain rate constitutive equation of fiber tows. International Journal of Impact Engineering, 2013, 57: 145-158

4. Jin LM, Jin BC, Kar N, Nutt S, Sun BZ, Gu BH. Tension-tension fatigue behavior of layer-to-layer 3-D angle-interlock woven composites. Materials Chemistry and Physics, 2013, 140: 183-190

5. Hou YQ, Hu HJ, Sun BZ, Gu BH. Strain rate effects on tensile failure of 3-D angle-interlock woven carbon fabric. Materials and Design, 2013, 46: 857-866

6. Mohmmed R, Zhang F, Sun BZ, Gu BH. Finite element analyses of low-velocity impact damage of foam sandwiched composites with different ply angles face sheets, Materials and Design, 2013, 47: 189-199

7. Hou YQ, Jiang LL, Sun BZ, Gu BH. Strain rate effects of tensile behaviors of 3-D orthogonal woven fabric: Experimental and finite element analyses, Textile Research Journal, 2013, 83(4): 337-354

8. Sun BZ, Liu RQ, Gu BH. Numerical simulation of three-point bending fatigue of four-step 3-D braided rectangular composite under different stress levels from unit-cell approach. Computational Materials Science, 2012, 65: 239-246

9. Sun BZ, Niu ZL, Jin LM, Zhang Y, Gu BH. Experimental investigation and numerical simulation of three-point bending fatigue of 3D orthogonal woven composite. Journal of The Textile Institue, 2013, 103(12): 1312-1327

10. Gan XH, Yan JH, Gu BH, Sun BZ. Impact tensile behavior and frequency response of 3D braided composites. Textile Research Journal, 2012, 82(3): 280-287

11. Zhu LT, Sun BZ, Gu BH. Frequency features of basalt filament tows under quasi-static and high strain rate tension. Journal of Composite Materials. 2012,46(11): 1285-1293

12. Ma PB, Sun BZ, Gu BH.

13. Jia XW, Sun BZ, Gu BH. A Numerical Simulation on Ballistic Penetration Damage of 3D Orthogonal Woven Fabric at Microstructure Level. International Journal of Damage Mechanics. 2012, 21(2): 237-266

14. Zhu LT, Sun BZ, Hu H, Gu BH. Ballistic impact damage of biaxial multilayer knitted composite. Journal of Composite Materials, 2012, 46(5): 527-547

15. , . Characterization of the tensile behaviour of a co-woven-knitted composite in the continuous and discrete frequency domain. Philosophical Magazine, 2012, 92(1):1966-1997

16. Luan K, Sun BZ, Gu BH. A Multi-scale Geometrical Model for Finite Element Analyses of Three-dimensional Angle-Interlock Woven Composite under Ballistic Penetration. CMES-Computer Modeling in Engineering & Sciences, 2011, 79(1): 31-61

17. Zhao Q, Jin LL, Jiang LL, Zhang Y, Sun BZ, Gu BH. Experimental characterizations of bending fatigue of a four-step 3-D braided rectangular composite under different stress levels. Journal of Reinforced Plastics and composites. 2011, 30(18):1571-1582

18. Shi WF, Hu H, Sun BZ, Gu BH. Energy absorption of 3D orthogonal woven fabric under ballistic penetration of hemispherical-cylindrical projectile. Journal of the Textile Institute, 2011, 102(10):875-889

19. Jia XW, Sun BZ, Gu BH. Ballistic penetration of conically cylindrical steel projectile into 3D orthogonal woven composite: a finite element study at microstructure level. Journal of Composite Materials, 2011, 45(9): 965-987

20. Cui F, Sun BZ, Gu BH. Fiber inclination model fro finite element analysis of three-demensional angle interlock woven composite under ballistic penetration. Journal of Composite Matrials, 2011, 45(14): 1499-1509

21. Sun BZ, Wang YX, Wang P, Hu H, Gu BH. Investigations of Puncture Behaviors of Woven Fabrics From Finite Element Analyses and Experimental Tests. Textile Research Journal, 2011, 81(10): 992-1007

22. Wang P, Ma Q, Sun BZ, Hu H, Gu BH. Finite elemnet modeling of woven fabric tearing damage. Textile Research Journal, 2011, 81(12): 1273-1286

23. Hou YQ, Sun BZ, Gu BH. An analytical model for the ballistic impact of three dimensional angle-interlock woven fabric penetrated by a rigid cylindro-spherical projectile. Textile Resaerch Journal, 2011, 81(12): 1287-1303

24. Tang YY, Sun BZ, Gu BH. Imapct damage of 3D cellular woven compiste from unit-cell level analysis. International Iournal of Damage Mechanics, 2011, 20(3): 323-346

25. Ma PB, Hu H, Zhang Y, Sun BZ, Gu BH. Frequency features of co-woven-knitted fabric (CWKF) composite under tension at various strain rates. Composites Part A, 2011, 42(5): 446-452

专利专著
顾伯洪，孙宝忠.《纺织结构复合材料冲击动力学》，北京，科学技术出版社，2012年（共549页）




获奖荣誉 获奖荣誉
1、2011年上海市青年科技启明星(跟踪)；
2、2011年东华大学青年师德建设标兵；
3、2010年中国复合材料学会NCCM-16优秀论文奖；
4、2009年全国优秀博士学位论文；
5、2009年国家级教学团队；
6、2008年上海市青年科技启明星；
7、2008年上海市晨光****；
8、2008年东华大学优秀青年后备人选。






其他信息 社会任职
Journal of Composites编委
Chinese Journal of Engineering编委
American Journal of Mechanics and Applications编委
中国复合材料学会高级会员
中国复合材料学会企业创新专家