删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
西南交通大学材料科学与工程学院导师教师师资介绍简介-曾迎
本站小编 Free考研考试/2021-09-26
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
通讯/办公地址: 邮箱:
同专业硕导
个人简介
曾迎,博士,讲师,2015年12月毕业于重庆大学国家镁合金材料工程技术研究中心,同年入职西南交通大学材料学院。2019年至曼彻斯特大学访问研修一年,合作导师为Joseph Robson教授与Jo?o Fonseca教授,参与曼大、帝国理工及剑桥大学三所大学联合研究的“轻量化计划(LightForm)”项目。
曾迎博士长期从事轻量化合金材料(包括镁、钛、铝等)微观相结构调控及力学行为/性能的研究。擅长利用多尺度方法(宏观-力学性能、微观-析出相-滑移孪生、原子-第一性原理计算)研究金属材料组织与性能的关联性,在合金设计与开发方面具有丰富的经验,开发了多种高强耐热镁合金,申请发表专利3项。担任金属领域权威SCI期刊Materials Science and Engineering: A, Journal of Alloys and Compounds, Journal of Magnesium and alloys等期刊审稿人。现主持国家自然科学基金1项,省自然科学基金1项,主研国家重点研发项目等。针对镁、钛合金的相结构调控及力学行为/性能研究,先后在Materials Science and Engineering: A, Journal of Alloys and Compounds等SCI学术期刊上发表论文20余篇。
教育经历
[1] 2019.8-2020.8
曼彻斯特大学|材料科学与工程|访问****
[2] 2010.9-2015.12
重庆大学|材料科学与工程|博士研究生毕业|工学博士学位
研究方向
[1]轨道交通用轻量化合金材料(主研镁、钛、铝)
[2]微观相结构调控及力学行为/性能的研究
[3]材料多尺度计算模拟
工作经历
[1] 2015.12-至今
 西南交通大学 
团队成员
暂无内容
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
科学研究 当前位置: 中文主页 >> 科学研究
论文成果
在J. Alloy. Compd., Mater. Sci. Eng. A,Intermetallics, Mater. & Des., J. Mater. Res.等材料领域主流SCI期刊累计发表论文20余篇。
[1]. Y.J. Wan, Y. Zeng *, Q. Zeng, B. Song, B. Jiang, Simultaneously improved strength and toughness of a Mg-Sn alloy through abundant prismatic lath-shaped precipitates [J], Materials Science and Engineering A, 811 (2021) 141087. (SCI 1区,IF4.652)
[2]. 万杨杰, 钱晓英, 曾迎*, 孙可欣, 张英波, 权高峰. Al-Zn-Mg合金的相图计算及电子结构与力学性能的第一性原理计算. 材料导报, 2021, 35(2): 2139-2144.
[3]. Y.J. Wan, Y. Zeng *, Y.C. Dou*, D.C. Hu, X.Y. Qian, K.X. Sun, G.F. Quan. Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys. Journal of Magnesium and alloys, 2020, in press, doi.org/10.1016/j.jma.2020.09.028. (SCI 1区,IF7.56)
[4]. K.X. Sun, Y. Zeng*, D.D. Yin*, F. Gao, L.J. Long, X.Y. Qian, Y.J. Wan, G.F. Quan and B. Jiang: Quantitative study on slip/twinning activity and theoretical critical shear strength of Mg alloy with Y addition. Materials Science and Engineering: A, 792, (2020) 139801 (SCI 1区,IF4.652)
[5]. Y. Wan, Y. Zeng*, X. Qian, Q. Yang, B. Jiang, First-principles calculations of structural, elastic and electronic properties of second phases and solid solutions in Ti–Al–V alloys, Physica B Condensed Matter, (2020) 412241. (SCI 3区,IF1.902)
[6]. X.Y. Qian, Y. Zeng*, B. Jiang, Q.R. Yang, Y.J. Wan, G.F. Quan, F.S. Pan, Grain refinement mechanism and improved mechanical properties in Mg–Sn alloy with trace Y addition [J]. Journal of Alloys and Compounds, 820 (2020) 153122. (SCI 2区,IF4.12)
[7]. 杨秋荣,曾迎*,周明扬,黄广号,任凌宝,陆嘉伟,尹冬弟,蒋斌.微量Y(0.2 wt.%)对铸造Mg-Sn合金热变形行为影响[J].稀有金属材料与工程,2019,48(7):2275~2283.[Yang Qiurong,Zeng Ying,Zhou Mingyang,Huang Guanghao,Ren Lingbao,Lu Jiawei,Yin Dongdi,Jiang Bin.Effect of Yttrium Addition (0.2 wt.%) on the Hot Compression Behavior of the As-cast Mg-Sn Alloy[J].Rare Metal Materials and Engineering,2019,48(7):2275~2283.] (SCI 4区,IF0.63)
[8]. XiaoYing Qian, Ying Zeng*, Bin Jiang, Yucheng Dou, Ouling Shi , Gaofeng Quan, Fusheng Pan. Study on mechanical behaviors and theoretical critical shear strength of cold-rolled AZ31 alloy with different Li additions. Materials Science and Engineering: A, 742 (2019) 241-254. (SCI 1区,IF4.62)
[9]. Ying Zeng*, Ouling Shi, Bin Jiang*, Gaofeng Quan, Fusheng Pan. Improved formability with theoretical critical shear strength transforming in Mg alloys with Sn addition. Journal of Alloys and Compounds, 764 (2018) 555-564. (SCI 2区,IF4.12)
[10]. Ying Zeng*, Bin Jiang*, Ouling Shi, Gaofen Quan, Salih Al-Ezzi, FuSheng Pan, First Principle and Experimental Study for Site Preferences of Formability Improved Alloying Elements in Mg Crystal. Metals and Materials International, 24 (2018) 830-839. (SCI 3区,IF1.64)
[11]. Ying Zeng, Bin Jiang*, Qiurong Yang, Gaofeng Quan, Junjie He, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets. Materials Science and Engineering: A, 2017, 700: 59-65. (SCI 1区,IF4.652)
[12]. Ying Zeng, Bin Jiang*, Ruihong Li, Hengmei Yin, Salih Al-Ezzi. Grain Refinement Mechanism of the As-Cast and As-Extruded Mg–14Li Alloys with Al or Sn Addition. Metals, 2017,7:172 (SCI 3区,IF2.41)
[13]. Ying Zeng, Bin Jiang*, Ruihong Li, Junjie He, Xiangsheng Xia, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg–3Al–1Zn alloy. Materials Science and Engineering: A, 2015, 631: 189-195. (SCI 1区,IF4.62)
[14]. Ying Zeng, Bin Jiang*, Mingxing Zhang, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Mg24Y5 intermetallic particles on grain refinement of Mg-9Li alloy, Intermetallics, 45 (2014) 18-23. (SCI 2区,IF3.66)
[15]. Ying Zeng, Bin Jiang*, Dehui Huang, Jiahong Dai, Fusheng Pan. Effect of Ca addition on grain refinement of Mg–9Li–1Al alloy, Journal of Magnesium and Alloys, 1 (2013) 297-302. (SCI 1区,IF7.56)
[16]. Ying Zeng, Bin Jiang*, Ruihong Li, Yuhong Liu. Influences of Alloying Elements on the Microstructure and Properties of Mg-Li Alloys, Foundry, 61(3)2012, 275-279.
[17]. Bin Jiang*, Ying Zeng, Mingxing Zhang, Jichao Liao, Fusheng Pan. The effect of addition of cerium on the grain refinement of Mg–3Al–1Zn cast alloy. Journal of materials research, 28 (2013) 2694-2700.
[18]. Bin Jiang*, Ying Zeng, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Sr on microstructure and aging behavior of Mg–14Li alloys, Progress in Natural Science: Materials International, 22 (2012) 160-168.
[19]. Bin Jiang*, Ying Zeng, Mingxing Zhang, Hengmei Yin , Qingshan Yang, Fusheng Pan. Effects of Sn on microstructure of as-cast and as-extruded Mg–9Li alloys, Transactions of Nonferrous Metals Society of China, 23 (2013) 904-908.
[20]. Dan Liu, Jiangfeng Song, Bin Jiang*, Ying Zeng, Qinghang Wang, Zhongtao Jiang, Bo Liu, Guangsheng Huang, Fusheng Pan, Effect of Al content on microstructure and mechanical properties of as-cast Mg-5Nd alloys. Journal of Alloys and Compounds, 737 (2018) 263-270.
[21]. Guanghao Huang, Dongdi Yin*, Jiawei Lu, Hao Zhou, Ying Zeng, Gaofeng Quan, Qudong Wang, Microstructure, texture and mechanical properties evolution of extruded fine-grained Mg-Y sheets during annealing [J]. Materials Science and Engineering: A, 720 (2018) 24-35.
[22]. Jiawei Lu, Dongdi Yin*, Guanghao Huang, Gaofeng Quan, Ying Zeng, Hao Zhou, Qudong Wang, Plastic anisotropy and deformation behavior of extruded Mg-Y sheets at elevated temperatures. Materials Science and Engineering: A, 700 (2017) 598-608.
[23]. Zhongtao Jiang, Bin Jiang*, Ying Zeng, Jiahong Dai, Fusheng Pan. Role of Al modification on the microstructure and mechanical properties of as-cast Mg–6Ce alloys. Materials Science & Engineering A, 645 (2015) 57-64.
[24]. Junjie He, Bin Jiang*, QingshanYang, Ying Zeng, Xiangsheng Xia, Fusheng Pan, Improved ductility of magnesium alloy sheets by pre-hardening and annealing [J]. Materials Science & Technology, 31 (2015) 1383-1387.
[25]. Hanwu Dong, Fusheng Pan, Bin Jiang*, Ying Zeng. Evolution of microstructure and mechanical properties of a duplex Mg–Li alloy under extrusion with an increasing ratio, Materials & Design, 57 (2014) 121-127.
[26]. Hengmei Yin, Bin Jiang*, Xiaoyong Huang, Ying Zeng, Qingshan Yang, Mingxing Zhang, Fusheng Pan. Effect of Ce addition on microstructure of Mg–9Li alloy, Transactions of Nonferrous Metals Society of China, 23 (2013) 1936-1941.
[27]. Bin Jiang*, Yuhong Liu, Ruihong Li, Qing Xiang, Ying Zeng, Fusheng Pan. Effects of Yttrium and Strontium Addition on Electrochemical Behavior of Mg-14Li-1Al Alloys. Rare Metal Materials & Engineering. 2013, 42(10):1999-2003.
研究领域
长期从事轻量化合金材料(包括镁、钛、铝等)微观相结构调控及力学行为/性能的研究。擅长利用多尺度方法(宏观-力学性能、微观-析出相-滑移孪生、原子-第一性原理计算)研究金属材料组织与性能的关联性,在合金设计与开发方面具有丰富的经验。
专利
低各向异性镁合金材料及其制备方法
一种矿物油作为制备多孔镁合金发泡剂的应用和制备多孔镁合金的方法
著作成果
暂无内容
科研项目 MORE+
孪生-析出-去孪生调控Mg-Sn合金析出相取向及其强韧化机制研究, 在研
金属化合物对铸态Mg-Al合金晶粒细化的作用机制
国际材联亚洲材料大会
合金化对镁锂合金组织及性能的影响
第二相对Mg-Sn-Y合金动态再结晶及热加工行为的影响规律
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
论文成果 当前位置: 中文主页 >> 科学研究 >> 论文成果
在J. Alloy. Compd., Mater. Sci. Eng. A,Intermetallics, Mater. & Des., J. Mater. Res.等材料领域主流SCI期刊累计发表论文20余篇。
[1]. Y.J. Wan, Y. Zeng *, Q. Zeng, B. Song, B. Jiang, Simultaneously improved strength and toughness of a Mg-Sn alloy through abundant prismatic lath-shaped precipitates [J], Materials Science and Engineering A, 811 (2021) 141087. (SCI 1区,IF4.652)
[2]. 万杨杰, 钱晓英, 曾迎*, 孙可欣, 张英波, 权高峰. Al-Zn-Mg合金的相图计算及电子结构与力学性能的第一性原理计算. 材料导报, 2021, 35(2): 2139-2144.
[3]. Y.J. Wan, Y. Zeng *, Y.C. Dou*, D.C. Hu, X.Y. Qian, K.X. Sun, G.F. Quan. Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys. Journal of Magnesium and alloys, 2020, in press, doi.org/10.1016/j.jma.2020.09.028. (SCI 1区,IF7.56)
[4]. K.X. Sun, Y. Zeng*, D.D. Yin*, F. Gao, L.J. Long, X.Y. Qian, Y.J. Wan, G.F. Quan and B. Jiang: Quantitative study on slip/twinning activity and theoretical critical shear strength of Mg alloy with Y addition. Materials Science and Engineering: A, 792, (2020) 139801 (SCI 1区,IF4.652)
[5]. Y. Wan, Y. Zeng*, X. Qian, Q. Yang, B. Jiang, First-principles calculations of structural, elastic and electronic properties of second phases and solid solutions in Ti–Al–V alloys, Physica B Condensed Matter, (2020) 412241. (SCI 3区,IF1.902)
[6]. X.Y. Qian, Y. Zeng*, B. Jiang, Q.R. Yang, Y.J. Wan, G.F. Quan, F.S. Pan, Grain refinement mechanism and improved mechanical properties in Mg–Sn alloy with trace Y addition [J]. Journal of Alloys and Compounds, 820 (2020) 153122. (SCI 2区,IF4.12)
[7]. 杨秋荣,曾迎*,周明扬,黄广号,任凌宝,陆嘉伟,尹冬弟,蒋斌.微量Y(0.2 wt.%)对铸造Mg-Sn合金热变形行为影响[J].稀有金属材料与工程,2019,48(7):2275~2283.[Yang Qiurong,Zeng Ying,Zhou Mingyang,Huang Guanghao,Ren Lingbao,Lu Jiawei,Yin Dongdi,Jiang Bin.Effect of Yttrium Addition (0.2 wt.%) on the Hot Compression Behavior of the As-cast Mg-Sn Alloy[J].Rare Metal Materials and Engineering,2019,48(7):2275~2283.] (SCI 4区,IF0.63)
[8]. XiaoYing Qian, Ying Zeng*, Bin Jiang, Yucheng Dou, Ouling Shi , Gaofeng Quan, Fusheng Pan. Study on mechanical behaviors and theoretical critical shear strength of cold-rolled AZ31 alloy with different Li additions. Materials Science and Engineering: A, 742 (2019) 241-254. (SCI 1区,IF4.62)
[9]. Ying Zeng*, Ouling Shi, Bin Jiang*, Gaofeng Quan, Fusheng Pan. Improved formability with theoretical critical shear strength transforming in Mg alloys with Sn addition. Journal of Alloys and Compounds, 764 (2018) 555-564. (SCI 2区,IF4.12)
[10]. Ying Zeng*, Bin Jiang*, Ouling Shi, Gaofen Quan, Salih Al-Ezzi, FuSheng Pan, First Principle and Experimental Study for Site Preferences of Formability Improved Alloying Elements in Mg Crystal. Metals and Materials International, 24 (2018) 830-839. (SCI 3区,IF1.64)
[11]. Ying Zeng, Bin Jiang*, Qiurong Yang, Gaofeng Quan, Junjie He, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets. Materials Science and Engineering: A, 2017, 700: 59-65. (SCI 1区,IF4.652)
[12]. Ying Zeng, Bin Jiang*, Ruihong Li, Hengmei Yin, Salih Al-Ezzi. Grain Refinement Mechanism of the As-Cast and As-Extruded Mg–14Li Alloys with Al or Sn Addition. Metals, 2017,7:172 (SCI 3区,IF2.41)
[13]. Ying Zeng, Bin Jiang*, Ruihong Li, Junjie He, Xiangsheng Xia, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg–3Al–1Zn alloy. Materials Science and Engineering: A, 2015, 631: 189-195. (SCI 1区,IF4.62)
[14]. Ying Zeng, Bin Jiang*, Mingxing Zhang, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Mg24Y5 intermetallic particles on grain refinement of Mg-9Li alloy, Intermetallics, 45 (2014) 18-23. (SCI 2区,IF3.66)
[15]. Ying Zeng, Bin Jiang*, Dehui Huang, Jiahong Dai, Fusheng Pan. Effect of Ca addition on grain refinement of Mg–9Li–1Al alloy, Journal of Magnesium and Alloys, 1 (2013) 297-302. (SCI 1区,IF7.56)
[16]. Ying Zeng, Bin Jiang*, Ruihong Li, Yuhong Liu. Influences of Alloying Elements on the Microstructure and Properties of Mg-Li Alloys, Foundry, 61(3)2012, 275-279.
[17]. Bin Jiang*, Ying Zeng, Mingxing Zhang, Jichao Liao, Fusheng Pan. The effect of addition of cerium on the grain refinement of Mg–3Al–1Zn cast alloy. Journal of materials research, 28 (2013) 2694-2700.
[18]. Bin Jiang*, Ying Zeng, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Sr on microstructure and aging behavior of Mg–14Li alloys, Progress in Natural Science: Materials International, 22 (2012) 160-168.
[19]. Bin Jiang*, Ying Zeng, Mingxing Zhang, Hengmei Yin , Qingshan Yang, Fusheng Pan. Effects of Sn on microstructure of as-cast and as-extruded Mg–9Li alloys, Transactions of Nonferrous Metals Society of China, 23 (2013) 904-908.
[20]. Dan Liu, Jiangfeng Song, Bin Jiang*, Ying Zeng, Qinghang Wang, Zhongtao Jiang, Bo Liu, Guangsheng Huang, Fusheng Pan, Effect of Al content on microstructure and mechanical properties of as-cast Mg-5Nd alloys. Journal of Alloys and Compounds, 737 (2018) 263-270.
[21]. Guanghao Huang, Dongdi Yin*, Jiawei Lu, Hao Zhou, Ying Zeng, Gaofeng Quan, Qudong Wang, Microstructure, texture and mechanical properties evolution of extruded fine-grained Mg-Y sheets during annealing [J]. Materials Science and Engineering: A, 720 (2018) 24-35.
[22]. Jiawei Lu, Dongdi Yin*, Guanghao Huang, Gaofeng Quan, Ying Zeng, Hao Zhou, Qudong Wang, Plastic anisotropy and deformation behavior of extruded Mg-Y sheets at elevated temperatures. Materials Science and Engineering: A, 700 (2017) 598-608.
[23]. Zhongtao Jiang, Bin Jiang*, Ying Zeng, Jiahong Dai, Fusheng Pan. Role of Al modification on the microstructure and mechanical properties of as-cast Mg–6Ce alloys. Materials Science & Engineering A, 645 (2015) 57-64.
[24]. Junjie He, Bin Jiang*, QingshanYang, Ying Zeng, Xiangsheng Xia, Fusheng Pan, Improved ductility of magnesium alloy sheets by pre-hardening and annealing [J]. Materials Science & Technology, 31 (2015) 1383-1387.
[25]. Hanwu Dong, Fusheng Pan, Bin Jiang*, Ying Zeng. Evolution of microstructure and mechanical properties of a duplex Mg–Li alloy under extrusion with an increasing ratio, Materials & Design, 57 (2014) 121-127.
[26]. Hengmei Yin, Bin Jiang*, Xiaoyong Huang, Ying Zeng, Qingshan Yang, Mingxing Zhang, Fusheng Pan. Effect of Ce addition on microstructure of Mg–9Li alloy, Transactions of Nonferrous Metals Society of China, 23 (2013) 1936-1941.
[27]. Bin Jiang*, Yuhong Liu, Ruihong Li, Qing Xiang, Ying Zeng, Fusheng Pan. Effects of Yttrium and Strontium Addition on Electrochemical Behavior of Mg-14Li-1Al Alloys. Rare Metal Materials & Engineering. 2013, 42(10):1999-2003.
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
研究领域 当前位置: 中文主页 >> 科学研究 >> 研究领域
长期从事轻量化合金材料(包括镁、钛、铝等)微观相结构调控及力学行为/性能的研究。擅长利用多尺度方法(宏观-力学性能、微观-析出相-滑移孪生、原子-第一性原理计算)研究金属材料组织与性能的关联性,在合金设计与开发方面具有丰富的经验。
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
专利 当前位置: 中文主页 >> 科学研究 >> 专利
低各向异性镁合金材料及其制备方法2019-10-28
一种矿物油作为制备多孔镁合金发泡剂的应用和制备多孔镁合金的方法2019-10-28
共2条1/1 首页上页下页尾页
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
著作成果 当前位置: 中文主页 >> 科学研究 >> 著作成果
共0条0/0
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
科研项目 当前位置: 中文主页 >> 科学研究 >> 科研项目
孪生-析出-去孪生调控Mg-Sn合金析出相取向及其强韧化机制研究, 在研
金属化合物对铸态Mg-Al合金晶粒细化的作用机制
国际材联亚洲材料大会
合金化对镁锂合金组织及性能的影响
第二相对Mg-Sn-Y合金动态再结晶及热加工行为的影响规律
Sn3Y5在变形镁合金中的晶粒细化机制及强韧性调控关键技术研究
共6条1/1 首页上页下页尾页
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
个人信息MORE +
曾迎 讲师
所在单位: 材料科学与工程学院
学历: 博士研究生毕业
办公地点: 西南交通大学三号楼3214
联系方式: clzy@swjtu.edu.cn
学位: 工学博士学位
职称: 讲师
电子邮箱: clzy@swjtu.edu.cn
毕业院校: 重庆大学
硕士生导师
学科:材料科学与工程
同专业硕导
教学工作 当前位置: 中文主页 >> 教学工作
教学资源
暂无内容
授课信息
新材料导论 /XCLDL
材料CAE/CAM仿真技术 /CLCAE/CAMFZJS
教学成果
暂无内容
Copyright ? 2019 西南交通大学. All Rights Reserved.蜀ICP备**号
地址:中国四川省成都市高新区西部园区西南交通大学
川公网安备061号
技术支持:信息化与网络管理处
访问量:次
相关话题/材料科学与工程学院 西南交通大学
西南交通大学材料科学与工程学院导师教师师资介绍简介-张程菘
个人信息MORE+张程菘ChengsongZhang讲师教师英文名称:ChengsongZhang所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:西南交通大学九里校区金属热处理实验室学位:工学博士学位职称:讲师电子邮箱:cszhang@home.swjtu.edu.cn毕业院校:哈尔滨工业 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-杨维清
个人信息MORE+杨维清YANGWeiqing教授教师英文名称:YANGWeiqing所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:西南交通大学九里校区电气馆3424联系方式:学位:理学博士学位职称:教授电子邮箱:wqyang@swjtu.edu.cn主要任职:博导毕业院校:四川大学博士 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-杨志禄
个人信息MORE+杨志禄研究员所在单位:材料科学与工程学院学历:博士研究生毕业学位:工学博士学位职称:研究员电子邮箱:zhiluyang1029@swjtu.edu.cn博士生导师学科:材料科学与工程通讯/办公地址:邮箱:同专业博导个人简介杨志禄,工学博士,研究员,博士生导师,西南交通大学“扬华** ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-曹宝宝
所在单位:材料科学与工程学院学历:博士研究生毕业联系方式:baobaocao@home.swjtu.edu.cn学位:工学博士学位职称:副教授电子邮箱:baobaocao@home.swjtu.edu.cn毕业院校:大连理工大学个人简介研究方向教育经历工作经历团队成员联系方式曹宝宝,男,1979年出 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-尹冬弟
个人信息PersonalInformation教师英文名称:DongdiYin学历:博士研究生毕业办公地点:西南交通大学九里校区3231性别:男联系方式:ahnydd@swjtu.edu.cn学位:工学博士学位毕业院校:上海交通大学联系方式OtherContactInformation通讯/办公地址 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-杨涛
个人信息MORE+杨涛副教授所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:四川省先进焊接及表面工程技术研究中心联系方式:通信地址:成都市二环路北一段111号电子邮箱:889268@qq.comtaoyang@home.swjtu.edu.cn办公电话:办公地点:四川省先进焊接及表面工程技 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-马传平
个人信息PersonalInformation所在单位:材料科学与工程学院学历:硕士研究生毕业学位:工程硕士专业学位教育经历EducationBackground工作经历WorkExperience暂无内容暂无内容研究方向ResearchFocus暂无内容Copyright?2019西南交通大学.A ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-陈渝萍
所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:西南交通大学信息楼0101联系方式:通信地址:成都市二环路北一段111号电子邮箱:yupingc@home.swjtu.edu.cn办公电话:办公地点:西南交通大学信息楼0101学位:理学博士学位职称:教授电子邮箱:yupingc@home. ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-朱宗涛
个人信息PersonalInformation所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:西南交通大学(九里校区)电气馆3224联系方式:通信地址:成都市二环路北一段111号办公电话:学位:工学博士学位电子邮箱:zongtaozhu@home.swjtu.edu.cn毕业院校:吉林大学 ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26西南交通大学材料科学与工程学院导师教师师资介绍简介-徐晓玲
个人信息MORE+徐晓玲讲师所在单位:材料科学与工程学院学历:博士研究生毕业办公地点:交大九里校区电气馆3418联系方式:通信地址:成都市二环路北一段111号电子邮箱:bihan_2001@163.com办公电话:办公地点:交大九里校区电气馆3418学位:工学博士学位职称:讲师电子邮箱:bihan_ ...西南交通大学师资导师 本站小编 Free考研考试 2021-09-26