姓名:
李佩栋

性别:
男

出生年月:
1989-11

学位:
博士

职称:
副研究员、硕士生导师

联系电话:


电子邮箱:
lipeidongde@163.com; peidongli@scu.edu.cn

通讯地址:
成都市一环路南一段24号

邮编:
610065




【个人描述】

副研究员，从事固体力学相关的科研与教学工作。主要研究压电、电磁、准晶等智能材料/结构的变形、损伤、断裂、接触等基本力学行为。在Int J Solids Struct，Mech Mater，Int J Mech Sci，Eng Fract Mech，Smart Mater Struct，Int J Rock Mech Min Sci等国际期刊上发表SCI论文23篇，Google Scholar引用280余次。(2021.06更新)


【学习及工作经历】

1、2018.01—至今，四川大学，建筑与环境学院力学系，助理研究员、副研究员（专职博士后）
2、2019.12—2020.12，新加坡南洋理工大学，博士后
3、2016.10—2016.11，英国诺丁汉大学，访学
4、2013.09—2017.12，西南交通大学，固体力学，获博士学位
5、2011.09—2013.07，西南交通大学，固体力学，硕士（转硕博连读）
6、2007.09—2011.06，兰州大学，理论与应用力学，获学士学位


【主要研究领域】

1、多物理场耦合下材料的损伤与断裂力学
2、功能梯度复合材料/结构的力学行为与工程应用
3、接触力学与摩擦学
4、核材料的辐照损伤与破坏原理


【主持的科研项目】

1、热-机械载荷下准晶体中多重平面裂纹交互影响的三维分析，国家自然科学基金青年项目（主持）
2、热-电-力耦合下准晶压电材料的力学性能及失效原理研究，四川省科技厅项目（主持）
3、面向等离子体多晶钨辐照损伤与断裂机理及相场模拟，中国博士后特别资助项目（主持）
4、热-力耦合条件下准晶接触问题的三维分析，中国博士后面上项目（主持）
5、考虑热效应的各向异性多孔介质裂纹问题三维解析研究，教育部重点实验室开放基金（主持）

【代表性论著】（不超过20篇）

1. Li PD*, Fan HD, Wang M, Zhou K, Wang QY*. A closed-form solution for the 3D steady-state thermoporoelastic field in an infinite transversely isotropic rock weakened by an elliptical crack. International Journal of Rock Mechanics and Mining Sciences 129 (2020) 104292.
2. Li PD, Zhang H, Wang QY, Shao BM*, Fan HD*. Effect of temperature on the performance of laterally constrained dielectric elastomer actuators with failure modes. Journal of Applied Polymer Science. 2020; e49037.
3. Li PD*, Zhou M, Wang QY*, Indentation on a one-dimensional hexagonal quasi-crystal half-space by an elliptic indenter. Meccanica 2019, 54: 1225-1243.
4. Li PD, Liu YJ, Zhang H, Wang QY*, Indentation on a half-infinite one-dimensional hexagonal quasi-crystal space by a rigid flat-ended cylindrical indenter with uniform heat flux or temperature. Mechanics of Materials 2019, 131: 33-46.
5. Li PD, Li XY*, Kang GZ, Axisymmetric thermo-elastic field in an infinite one-dimensional hexagonal quasi-crystal space containing a penny-shaped crack under anti-symmetric heat fluxes. Engineering Fracture Mechanics 190 (2018) 74-92.
6. Li PD, Li XY*, Kang GZ, Müller R, Electric and magnetic polarization saturations for a thermally loaded penny-shaped crack in a magneto-electro-thermo-elastic medium. Smart Materials and Structures 26 (2017) 095049 (15pp).
7. Li PD, Li XY*, Kang GZ, Müller R, Three-dimensional fundamental solution of a penny-shaped crack in an infinite thermo-magneto-electro-elastic medium with transverse isotropy. International Journal of Mechanical Sciences 2017, 130: 203-220.
8. Li PD, Li XY*, Kang GZ, Gao CF, Müller R, Crack tip electric polarization saturation of a thermally loaded penny-shaped crack in an infinite thermo-piezo-elastic medium. International Journal of Solids and Structures, 2017, 117: 67-79.
9. Li PD, Li XY*, Kang GZ, Axisymmetric thermo-elastic field in an infinite space containing a penny shaped crack under a pair of symmetric uniform heat fluxes and its applications. International Journal of Mechanical Sciences, 2016, 115-116: 634-644.
10. Li PD, Li XY*, Zheng RF, Thermo-elastic Green’s functions for an infinite bi-material of one-dimensional hexagonal quasicrystals. Physics Letters A, 2013, 377: 637-642.
11. Li PD, Li XY*, Wang T, Three-dimensional thermo-electro-elastic field in a circular plate of functional graded materials with transverse isotropy. Mechanics of Advanced Materials and Structures, 2015, 22: 537-547.
12. Li PD, Li XY*, Kang GZ, Crack tip plasticity of a half-infinite Dugdale crack embedded in an infinite space of one-dimensional hexagonal quasicrystal. Mechanics Research Communications, 2015, 70, 72-78.
13. Li XY*, Li PD, Kang GZ, Chen WQ, Müller R, Steady-state thermo-elastic field in an infinite medium weakened by a penny-shaped crack: Complete and exact solutions. International Journal of Solids and Structures, 2016, 84, 167-182.
14. Zhang H, Li PD, Gong XF, Wang TJ, Li L, Liu YJ, Wang QY. Tensile properties, strain rate sensitivity and failure mechanism of single crystal superalloys CMSX-4. Materials Science and Engineering A 782 (2020) 139105
15. Li XY*, Li PD, Kang GZ, Crack tip plasticity of a thermally loaded penny-shaped crack in an infinite space of 1D QC. Acta Mechanica Solida Sinica, 2015, 28, 471-483.
16. Li XY*, Li PD, Three-dimensional thermo-elastic general solutions of one-dimensional hexagonal quasi-crystal and fundamental solutions. Physics Letters A, 2012, 376: 2004-2009.
17. Li XY*, Li PD, Wu TH, Shi MX, Zhu ZW, Three-dimensional fundamental solutions for one dimensional hexagonal quasicrystal with piezoelectric effect. Physics Letters A, 2014, 378: 826-834.
18. Li XY*, Li PD, Kang GZ, Pan DZ, Axisymmetric thermo-elasticity field in a functionally graded circular plate of transversely isotropic material. Mathematics and Mechanics of Solids, 2012, 18: 464-475.
19. Wang ZP, Wang T, Li PD, Li XY*, Chen WQ, Müller R, Three-dimensional fundamental thermo-elastic solutions applied to contact problems. Journal of Applied Physics, 2016, 120, 174904.
20. Li XY*, Wang YW, Li PD, Kang GZ, Müller R, Three-dimensional fundamental thermo-elastic field in an infinite space of two-dimensional hexagonal quasi-crystal with a penny-shaped/half-infinite plane crack. Theoretical and Applied Fracture Mechanics 88 (2017) 18-30.


【学术兼职】

1. 中国力学学会会员
2. 四川省力学学会会员
3. Applied Mathematical Modelling, Engineering Fracture Mechanics, International Journal of Rock Mechanics and Mining Sciences, Smart Materials and Structures, ZAMM, 固体力学学报等国内/国际期刊的审稿人

【获奖及荣誉】

1、2021.04 四川省海外高层次留学人才
2、2019.01 西南交通大学优秀博士毕业论文
3、2017.01 四川省优秀博士毕业生
4、2016/2014/2013 博士/硕士研究生国家奖学金
5、2014.12 西南交通大学博士研究生拔尖创新人才支持计划