齐咏生,刘飞,高学金,李永亭,刘利强.基于MCKD和teager能量算子的滚动轴承复合故障诊断[J].,2019,59(1):35-44 |
基于MCKD和teager能量算子的滚动轴承复合故障诊断 |
Composite fault diagnosis of rolling bearing based on MCKD and teager energy operator |
|
DOI:10.7511/dllgxb201901006 |
中文关键词:复合故障最大相关峭度解卷积(MCKD)能量算子故障诊断 |
英文关键词:composite faultmaximum correlated kurtosis deconvolution (MCKD)energy operatorfault diagnosis |
基金项目:国家自然科学基金资助项目(61763037,21466026);内蒙古自治区自然科学基金资助项目(2017MS0601). |
|
摘要点击次数:953 |
全文下载次数:706 |
中文摘要: |
滚动轴承是旋转机械的主要部件之一,复杂多变的工作环境导致其频繁出现故障,且大部分情况下多种故障复合.针对这一问题,提出一种基于改进最大相关峭度解卷积(MCKD)和teager能量算子混合的滚动轴承复合故障诊断方法.该方法通过粒子群优化算法(PSO)对不同类型故障下MCKD的影响参数(L和M)进行寻优,设置与故障类型相对应的解卷积周期,以相关峭度最大化进行MCKD算法迭代运算,优化滤波器系数,改进的MCKD算法减少了噪声的干扰.然后利用teager能量算子具有检测信号瞬态冲击的优势,对信号的teager能量进行频谱分析,实现复合故障诊断.最后利用西储大学轴承数据和轴承故障模拟实验台对该方法进行验证,结果表明该方法能从滚动轴承单一和复合故障中有效提取故障特征信息,准确识别出故障类型. |
英文摘要: |
Rolling bearing is one of the main parts of rotating machinery, but the complex and changeable working environment causes frequent failure and many kinds of composite fault. In order to solve this problem, a composite fault diagnosis method of rolling bearing based on improved maximum correlated kurtosis deconvolution (MCKD) and teager energy operator is proposed. In this method, particle swarm optimization (PSO) is used to optimize the MCKD parameters (L and M) of different types of faults, set up the deconvolution period corresponding to the fault type, calculate the MCKD algorithm with the maximum correlation kurtosis, and improve the filter coefficients. The improved MCKD algorithm reduces the noise interference to a great extent, and then use the teager energy operator to detect the transient impact of the signal, and analyze the teager energy spectrum to realize the composite fault diagnosis. Finally, the method is validated by using the bearing data of Case Western Reserve University and the bearing fault simulator, and the results show that it can effectively extract fault feature information from single and composite fault of rolling bearing and identify the fault type accurately. |
查看全文查看/发表评论下载PDF阅读器 |
| --> 关闭 |