王常浩,刘淑杰,王轶凡,张洪潮.再制造航空发动机涡轮盘LCF寿命预测研究[J].,2019,59(4):366-371 |
再制造航空发动机涡轮盘LCF寿命预测研究 |
Research on low cycle fatigue life prediction of remanufactured turbine disk on aeroengine |
|
DOI:10.7511/dllgxb201904006 |
中文关键词:再制造涡轮盘疲劳寿命修正系数局部应力-应变法低周疲劳寿命预测 |
英文关键词:remanufactured turbine diskfatigue life corrective factorlocal stress-strain methodlow cycle fatigue life prediction |
基金项目:国家自然科学基金资助项目(51775086). |
|
摘要点击次数:644 |
全文下载次数:510 |
中文摘要: |
针对缺乏航空发动机再制造涡轮盘低周疲劳(low cycle fatigue,LCF)参数数据,无法直接利用传统寿命预测方法进行再制造涡轮盘LCF寿命预测的现状,考虑疲劳极限与疲劳寿命的关系,提出利用再制造涡轮盘寿命修正系数,对通过有限元应力-应变分析及局部应力-应变法得到的寿命预测结果进行修正的方法,实现再制造涡轮盘寿命预测.最后将预测结果与相关试验结果进行对比,证明预测结果具有一定准确性. |
英文摘要: |
Due to the lack of low cycle fatigue (LCF) parameter data of remanufactured turbine disk on aeroengine, it is impossible to predict the low cycle fatigue life of remanufactured turbine disk directly by using traditional life prediction method. Considering the relationship between fatigue limit and fatigue life, the life corrective factor of remanufactured turbine disk is put forward to correct the life prediction results obtained by finite element stress-strain analysis and local stress-strain method, then the life of remanufactured turbine disk is predicted. Finally, the prediction results are compared with the relevant experimental results, which proves that the prediction results are accurate. |
查看全文查看/发表评论下载PDF阅读器 |
| --> 关闭 |