| 程博,张璧,白倩,乔国文.选区激光熔化马氏体时效钢(18Ni300)工艺参数研究[J].,2018,58(5):471-478 |
| 选区激光熔化马氏体时效钢(18Ni300)工艺参数研究 |
| Study of process parameters of maraging steel (18Ni300) manufactured by selective laser melting |
|
| DOI：10.7511/dllgxb201805005 |
| 中文关键词:选区激光熔化(SLM)增材制造马氏体时效钢球化效应工艺参数 |
| 英文关键词:selective laser melting (SLM)additive manufacturingmaraging steelballing effectprocess parameters |
| 基金项目:国家自然科学基金资助项目(51605077)；中央高校基本科研业务费专项资金资助项目(DUT17JC01). |
|
| 摘要点击次数:1018 |
| 全文下载次数:1347 |
| 中文摘要: |
| 采用单因素条件变量分析方法，研究选区激光熔化(SLM)增材制造过程中激光功率和扫描速度对马氏体时效钢成形件表面质量、相对致密度和硬度的影响规律．结果表明，随着激光扫描速度增大，试件表面熔道球化效应增强，内部缺陷增多，试件相对致密度和硬度逐渐降低；随着激光功率增大，试件表面熔道重熔区域变大，但试件的相对致密度和硬度无明显变化．本研究可为马氏体时效钢选区激光熔化工艺参数的合理选择提供参考． |
| 英文摘要: |
| The single variable analysis method is adopted to evaluate the effects of laser power and scanning speed on the surface topography, relative density and hardness of maraging steel parts in selective laser melting (SLM) additive manufacturing process. The result shows that with an increase in the laser scanning speed, balling effect increases and both relative density and hardness of the part are decreased because of the increment of internal defects, and with an increase in the laser power, remelt zone of track on workpiece surface is increased, but neither relative density nor hardness are affected. This study can provide reference for determining laser process parameters of SLMed maraging steels. |
| 查看全文查看/发表评论下载PDF阅读器 |
| --> | 关闭 |
优惠券领取后72小时内有效，10万种最新考研考试考证类电子打印资料任你选。涵盖全国500余所院校考研专业课、200多种职业资格考试、1100多种经典教材，产品类型包含电子书、题库、全套资料以及视频，无论您是考研复习、考证刷题，还是考前冲刺等，不同类型的产品可满足您学习上的不同需求。 ...考试优惠券 本站小编 Free壹佰分学习网 2022-09-19