| 王伟,王博,阎石,孙丽.FeMnSiCr系形状记忆合金管道连接件理论与试验研究[J].,2018,58(6):573-579 |
| FeMnSiCr系形状记忆合金管道连接件理论与试验研究 |
| Theoretical and experimental study of FeMnSiCr system shape memory alloy pipe joint |
|
| DOI：10.7511/dllgxb201806004 |
| 中文关键词:形状记忆合金管道连接件高温连接智能材料拉拔试验 |
| 英文关键词:shape memory alloypipe jointhigh temperature connectionsmart materialspullout test |
| 基金项目:国家自然科学基金青年基金资助项目(51308357)；辽宁省自然科学基金资助项目(201602627);辽宁省高等学校优秀人才支持计划资助项目(LJQ2015091). |
|
| 摘要点击次数:793 |
| 全文下载次数:779 |
| 中文摘要: |
| 以Brinson本构模型为基础，结合平面轴对称问题中的拉梅公式，推导出一个简化的本构模型，该模型可以用来计算形状记忆合金管道连接件与被连接钢管接触面上的径向压应力，并对形状记忆合金管道接头结构进行数值模拟分析．对3组FeMnSiCr系形状记忆合金管道连接件与被连接钢管进行了高温连接试验，并测试了连接后管道连接件的拉脱力．通过经验公式可得到管道接头结构接触面上径向压应力的大小．数值模拟和试验结果对比表明，简化的本构模型是有效的，能够为形状记忆合金管道连接件的应用提供一定的依据． |
| 英文摘要: |
| The Brinson constitutive model is used in conjunction with the Lame formula for a plane axial symmetry problem to deduce a simplified constitutive model that can be used to calculate the radial compressive stress on the contact surface between a shape memory alloy (SMA) pipe joint and steel tube. The numerical simulation analyses of the SMA pipe joint structures are also conducted. Three groups of FeMnSiCr series SMA pipe joints connected to steel tubes are tested at high temperatures, and the pull-off forces of these connected pipe joint are measured. Further, the radial compressive stresses on the contact surfaces of these pipe joint structures can be obtained using an empirical formula. The comparisons between the numerical simulations and experimental results show that the simplified constitutive model is effective and can provide a stable basis for application of SMA pipe joints. |
| 查看全文查看/发表评论下载PDF阅读器 |
| --> | 关闭 |
优惠券领取后72小时内有效，10万种最新考研考试考证类电子打印资料任你选。涵盖全国500余所院校考研专业课、200多种职业资格考试、1100多种经典教材，产品类型包含电子书、题库、全套资料以及视频，无论您是考研复习、考证刷题，还是考前冲刺等，不同类型的产品可满足您学习上的不同需求。 ...考试优惠券 本站小编 Free壹佰分学习网 2022-09-19