胡世武,郭杏林,郭强.一种改进的耗散型接触力模型及实验验证[J].,2016,56(3):221-229 |
一种改进的耗散型接触力模型及实验验证 |
An improved dissipative contact force model and experimental verification |
|
DOI:10.7511/dllgxb201603001 |
中文关键词:间隙接触力模型碰撞操作机连杆机构 |
英文关键词:clearancecontact force modelcollisionmanipulatorlinkage mechanism |
基金项目:“九七三”国家重点基础研究发展计划资助项目(2011CB706504). |
|
摘要点击次数:1460 |
全文下载次数:1609 |
中文摘要: |
为了研究含间隙运动副对连杆机构动态性能的影响,基于能够描述碰撞过程中能量损失的连续接触模型,建立了一个新的耗散型接触力模型.在这个新模型下对含间隙连杆机构进行动力学仿真,并进行了实验研究.主要考察了间隙尺寸和加载强度对连杆受力的影响.结果表明 间隙的存在会影响传递力曲线,使机构产生明显的振动冲击,间隙大小和加载速度是影响机构动态响应的主要因素.该仿真结果得到了实验的验证. |
英文摘要: |
To explore the influence of kinematic pair with clearances on the dynamic performance of linkage mechanism, a new dissipative contact force model is established based on the continuous contact model which can describe energy loss in collision. Using the new model, the dynamics behavior of linkage mechanism with clearances is simulated, and an experiment is conducted. The influence of the clearance size and loading strength to force on linkage is studied. The results show that the existence of clearance will influence the transfers force curve and make the mechanism produce obvious vibration impact. The main factors that influence mechanism′s dynamic response are clearance size and loading velocity. The simulation results are validated by the experiment. |
查看全文查看/发表评论下载PDF阅读器 |
| --> 关闭 |