李康镛
院系：工程力学系
办公电话：+86-139-4207-2501
电子信箱：KYL2813@gmail.com
更新时间：2016-1-22
其他专业：固体力学



个人简介
李康镛，1947年1月生，博士，教授，博士生导师，韩国国家工程院院士、韩国国家科学技术研究院院士、韩国延世大学名誉教授，工业装备结构分析国家重点实验室固定人员。1969年和1971年在韩国延世大学机械工程学院获学士和硕士学位，1978年在美国西弗吉尼亚大学机械工程学院获博士学位，相继在韩国国家科学技术研究院、韩国国家机械与金属材料研究院和延世大学机械工程学院等机构从事研究工作，曾担任韩国机械工程师学会主席、英国威塞克斯研究院会员，荣获1988年度韩国机械工程师学会学术奖、1987和2009年度韩国延世大学学术奖，被多次评为韩国延世大学学术最佳教授，其姓名已编写入马奎斯世界杰出人物名录和英国国际传记中心二十世纪杰出人物名录。其研究遍及断裂力学、疲劳与损伤分析、微观力学、声散射测试、摩擦腐蚀和焊接等多个领域。发表SCI索引学术论文266篇，学术专著3部。



社会兼职
国际期刊《Material Science Forum》编委会主席（1996-）；
韩国机械工程师学会主席（2003）；
英国威塞克斯研究院会员（2004-）；
国际期刊《Indian Journal of Engineering & Materials Science》编委（2008-2010）；
澳大利亚全球科学技术研究所会员（2013-）；


研究领域（研究课题）
研究方向为固体力学、断裂力学、疲劳与损伤分析、微观力学、声散射测试、摩擦腐蚀和焊接等，在上述领域均取得了重要成果。

作为课题负责人承担的主要课题包括：
1 Economic hardness for selection by acoustic emission method for minimum wear in elevator sheave, Hyundai Elevator Co., LTD.
2 Shape determination by acoustic emission method for minimum wear in tapered roller bearing, HAN GOOK MACHINERY CO.LTD
3 Detection of drill failure by acoustic emission method, Hyundai-Kia Motors
4 Measurement and simulation of fatigue life of engine mounting rubber, Hyundai-Kia Motors
5 Test of mechanical properties of engineering plastics, Samsung Electronics
6 Classification of detects of rotary compressor by acoustic emission signal pattern recognition method, Samsung Electronics
7 Test of fatigue properties of free oxygen cupper, LG Electronics
8 Measurement of TV mask frame deflection in welding, LG Electronics
9 Failure analysis of worm shaft, Nawootec Co., LTD
10 Development of acoustic emission monitoring system in resistance spot welding, Nawootec Co., LTD
11 Measurement of bending failure strength of steel in low temperature, Agency for Defence Development
12 IC package cracking analysis, Samsung Electronics
13 Intelligence package development for ultrasonic signal pattern recognition and its application to classification of welding defects in austenitic stainless steel, Korea Electrical Engineering & Science Research Institute
14 Welding fatigue test of high strength steel, Agency for Defence Development
15 Body jointing in electric automobile, Korea Automotive Technology Institute
16 Stress analysis and life evaluation of nozzle in nuclear power vessel, KEPCO Engineering & Construction Company, Inc.
17 Contact stress analysis of wheel and rail, Korea Institute of Machinery & Materials
18 Stress analysis of turbine case, Korea Research Institute of Standards and Science
19 Strength testing of body joining in electric automobile, GM Korea Company
20 Prevention of thermal stress and crack occurrence in cooling process of API-K55 steel, POSCO
21 Test of fatigue properties of tailored blanking sheet, Korea Automotive Technology Institute
22 Acoustic emission system development for performance evaluation of drill cutter, Hyundai-Kia Motors
23 Fretting corrosion analysis of electric connector, Korea Institute of S&T Evaluation and Planning
24 Development of insert tip drill for high strength steel, Bo Kyung Tool Co.
25 Laser-GMA hybrid welding in aluminium alloy, KISWEL Co., LTD
26 Material selection and structural integrity for car battery connection component, Chang Hwan Precision Terminal Co., LTD
27 Protection from surface corrosion of free oxygen cupper, DH-Metal Co.
28 Characterization and analysis of corrosion inhibition film formed on cupper and hybrid welding aluminium alloy, Korea-China Joint Research Program in National Research Foundation of Korea
29 Study of durability improvement for quality of oil flushing equipment, Seoul Development Institute
30 Life extension of boiler tube and components by WC cladding, Korea Institute of Energy Technology Evaluation and Planning
31 Economic hardness for selection by acoustic emission method for minimum wear in elevator sheave, Hyundai Elevator Co., LTD.
32 Shape determination by acoustic emission method for minimum wear in tapered roller bearing, HAN GOOK MACHINERY CO.LTD
33 Detection of drill failure by acoustic emission method, Hyundai-Kia Motors
34 Measurement and simulation of fatigue life of engine mounting rubber, Hyundai-Kia Motors
35 Test of mechanical properties of engineering plastics, Samsung Electronics
36 Classification of detects of rotary compressor by acoustic emission signal pattern recognition method, Samsung Electronics
37 Test of fatigue properties of free oxygen cupper, LG Electronics
38 Measurement of TV mask frame deflection in welding, LG Electronics
39 Failure analysis of worm shaft, Nawootec Co., LTD
40 Development of acoustic emission monitoring system in resistance spot welding, Nawootec Co., LTD
41 Measurement of bending failure strength of steel in low temperature, Agency for Defence Development
42 IC package cracking analysis, Samsung Electronics
43 Intelligence package development for ultrasonic signal pattern recognition and its application to classification of welding defects in austenitic stainless steel, Korea Electrical Engineering & Science Research Institute
44 Welding fatigue test of high strength steel, Agency for Defence Development
45 Body jointing in electric automobile, Korea Automotive Technology Institute
46 Stress analysis and life evaluation of nozzle in nuclear power vessel, KEPCO Engineering & Construction Company, Inc.
47 Contact stress analysis of wheel and rail, Korea Institute of Machinery & Materials
48 Stress analysis of turbine case, Korea Research Institute of Standards and Science
49 Strength testing of body joining in electric automobile, GM Korea Company
50 Prevention of thermal stress and crack occurrence in cooling process of API-K55 steel, POSCO
51 Test of fatigue properties of tailored blanking sheet, Korea Automotive Technology Institute
52 Acoustic emission system development for performance evaluation of drill cutter, Hyundai-Kia Motors
53 Fretting corrosion analysis of electric connector, Korea Institute of S&T Evaluation and Planning
54 Development of insert tip drill for high strength steel, Bo Kyung Tool Co.
55 Laser-GMA hybrid welding in aluminium alloy, KISWEL Co., LTD
56 Material selection and structural integrity for car battery connection component, Chang Hwan Precision Terminal Co., LTD
57 Protection from surface corrosion of free oxygen cupper, DH-Metal Co.
58 Characterization and analysis of corrosion inhibition film formed on cupper and hybrid welding aluminium alloy, Korea-China Joint Research Program in National Research Foundation of Korea
59 Study of durability improvement for quality of oil flushing equipment, Seoul Development Institute
60 Life extension of boiler tube and components by WC cladding, Korea Institute of Energy Technology Evaluation and Planning



硕博研究方向
(1) 固体力学
(2) 断裂力学
(3) 疲劳与损伤分析
(4) 微观力学
(5) 声散射测试
(6) 摩擦腐蚀和焊接

欢迎力学基础扎实、对科学研究或工程应用有浓厚兴趣的同学报考硕
士、博士研究生及从事博士后研究。将提供一流的科研条件和学术交流
机会。


出版著作和论文
专著：
1 Kang Yong Lee and Hideaki Takahashi, Fracture and Strength '90, Trans Tech Publications, 1991.
2 Y.Z.Chen, N.Hasebe, K.Y.Lee, Multiple Crack Problems in Elasticity, WIT press, ISBN : 1-85312-903-8, 2003
3 Zainual Huda, Robert Bulpett, and Kang Yong Lee, Design against Fracture and Failure, Trans Tech Publications, 2010

代表性国际期刊论文(发表SCI索引学术论文266篇)：
1 Kang Yong Lee* and Sunder H. Advani, Fracture criteria and stress intensity factors including the effect of crack closure, Engineering Fracture Mechanics, 1982, 16(2), pp. 257-264.
2 Kang Yong Lee*, Contradiction of Jk integral, International Journal of Fracture, 1986, 31(3), pp. R53-R54.
3 Kang Yong Lee* and Taek Sung Lee, Fatigue limits of crack initiation and propagation at notched plates, Engineering Fracture Mechanics, 1986, 25(1), pp. 111-114.
4 Kang Yong Lee*, Dong Sung Won and Hyung Jip Choi, Boundary element analysis of stress intensity factors for Z-shaped cracks, Engineering Fracture Mechanics, 1987, 27(1), pp. 75-82.
5 Kang Yong Lee* and Hyung Jip Choi, Boundary element analysis of stress intensity factors for bimaterial interface cracks, Engineering Fracture Mechanics, 1988, 29(4), pp. 461-472.
6 Kang Yong Lee*, Cyclic AE count rate and crack growth rate under low cycle fatigue fracture loading, Engineering Fracture Mechanics, 1989, 34(5-6), pp. 1069-1073.
7 Kang Yong Lee* and Taek Sung Lee, Hygrothermal fracture analysis of plastic IC package in reflow soldering process, Journal of Electronic Packaging, 1999, 121(3), pp. 148-155.
8 Soon Man Kwon and Kang Yong Lee*, Analysis of stress and electric fields in a rectangular piezoelectric body with a center crack under anti-plane shear loading, International Journal of Solids and Structures, 2000, 37(35), pp. 4859-4869.
9 Kang Yong Lee* and Won Gyu Lee and Y. Eugene Park, Interaction between a semi-infinite crack and a screw dislocation in a piezoelectric material, Journal of Applied Mechanics-Transactions of the ASME, 2000, 67(1), pp. 165-170.
10 Kang Yong Lee* and Byung Seok Kong, Theoretical and experimental studies for the failure criterion of adhesively bonded joints, Journal of Adhesion Science and Technology, 2000, 14(6), pp. 817-832.
11 Chang Won Shul and Kang Yong Lee*, Dynamic response of subsurface interface crack in multilayered orthotropic half-space under anti-plane shear impact loading, International Journal of Solids and Structures, 2001, 38(20), pp. 3563-3574.
12 Chang Won Shul and Kang Yong Lee*, A subsurface eccentric crack in a functionally graded coating layer on the layered half-space under an anti-plane shear impact load, International Journal of Solids and Structures, 2002, 39(7), pp. 2019-2029.
13 Xian-Fang Li* and Kang Yong Lee, Effects of electric field on crack growth for a penny-shaped dielectric crack in a piezoelectric layer, Journal of the Mechanics and Physics of Solids, 2004, 52(9), pp. 2079-2100.
14 W.Q. Chen, Kang Yong Lee* and H. Ding, General solution for transversely isotropic magneto-electro-thermo-elasticity and the potential theory method, International Journal of Engineering Science, 2004, 42(13-14), pp. 1361-1379.
15 W.Q. Chen and Kang Yong Lee*, On free vibration of cross-ply laminates in cylindrical bending, Journal of Sound and Vibration, 2004, 273(3), pp. 667-676.
16 Ji Hyuck Yang and Kang Yong Lee*, Application of a design of experiments approach to the reliability of a PBGA package, Soldering & Surface Mount Technology, 2005, 17(3), pp. 43-53.
17 Geun Woo Kim and Kang Yong Lee*, Improving the reliability of a plastic IC package in the reflow soldering process by DOE, Soldering & Surface Mount Technology, 2005, 17(1), pp. 40-48.
18 W.Q. Chen, Kang Yong Lee* and H.J. Ding, On free vibration of non-homogeneous transversely isotropic magneto-electro-elastic plates. Journal of Sound and Vibration, 2005, 279(1-2), pp. 237-251.
19 Geun Woo Kim and Kang Yong Lee*, Applying material optimization to fracture mechanics analysis to improve the reliability of the plastic IC package in reflow soldering process, IEEE Transactions on Components and Packaging Technologies, 2006, 29(1), pp. 47-53.
20 Byung Hwa Park and Kang Yong Lee*, Bogie frame design in consideration of fatigue strength and weight reduction, Proceedings of the Institution of Mechanical Engineers Part F-Journal of Rail and Rapid Transit, 2006, 220(3), pp. 201-206.
21 Byung Hwa Park, Nam Po Kim, Jung Seok Kim, Kang Yong Lee*, Optimum design of tilting bogie frame in consideration of fatigue strength and weight, Vehicle System Dynamics, 2006. 44(12), pp. 887-901.
22 Hang Rae Kim, Young Woo Park and Kang Yong Lee*, Application of grey relational analysis to determine welding parameters for Nd : YAG laser GMA hybrid welding of aluminium alloy, Science and Technology of Welding and Joining, 2008, 13(4), pp. 312-317.
23 Olcay Ersel Canyurt*, Hang Rae Kim, Kang Yong Lee, Estimation of laser hybrid welded joint strength by using genetic algorithm approach, Mechanics of Materials, 2008, 40(10), pp. 825-831.
24 Hyeong Do Kweon, Jong Sung Kim, Kang Yong Lee*, Fatigue design of nuclear class 1 piping considering thermal stratification, Nuclear Engineering and Design, 2008, 238(6), pp. 1265-1274.
25 Young Woo Park, G.N.K. Ramesh Bapu and Kang Yong Lee*, Fretting corrosion characteristics of electrodeposited and hot dipped tin coating contacts, Surface & Coatings Technology, 2008, 202(14), pp. 3164-3174.
26 C.Y. Dong* and Kang Yong Lee, Stress analysis of plastic IC package containing various interface delaminations using the boundary element method, Engineering Fracture Mechanics, 2008, 75(1), pp. 1-16.
27 C. Y. Song, Young Woo Park, Hang Rae Kim, Kang Yong Lee*, J. Lee, The use of Taguchi and approximation methods to optimize the laser hybrid welding of a 5052-H32 aluminium alloy plate, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2008, 222(4), pp. 507-518.
28 Hang Rae Kim, Kang Yong Lee*, Using the orthogonal array with grey relational analysis to optimize the laser hybrid welding of a 6061-T6 Al alloy sheet, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2008, 222(8), pp. 981-987.
29 Hang Rae Kim, Kang Yong Lee*, Application of Taguchi method to determine hybrid welding conditions of aluminum alloy, Journal of Scientific & Industrial Research, 2009, 68(4), pp. 296-300.
30 Da-quan Zhang, Young Woo Park, Kang Yong Lee*, Corrosion Behaviors of ND: YAG Laser-GMA Hybrid Weldment of AA5052-H32 Al Alloys, Surface Review and Letters, 2009, 16(1), pp. 43-47.
31 Da-Quan Zhang, Jin Li, Hyung Goun Joo and Kang Yong Lee*, Corrosion properties of Nd:YAG laser-GMA hybrid welded AA6061 Al alloy and its microstructure, Corrosion Science, 2009, 51(6), pp. 1399-1404.
32 Young Woo Park, Hyung Goun Joo and Kang Yong Lee*, Effect of intermittent fretting on corrosion behavior in electrical contact, Wear, 2010, 268(3-4), pp. 353-360
33 Kang Yong Lee*, Dae Ki Jeong, Hyung Goun Joo, Young Woo Park, Simulation for Fretting Corrosion of tin-coated Copper Contacts, Materials and Corrosion, 2011, 62(4), pp. 352-356
34 Ilkwang Jang and Kang Yong Lee*, Application of robust prediction for a laser CGMA hybrid welding process and parameter optimization of 6061-T6 aluminium alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010, 224(11), pp. 1671-1678.
35 Yue Ting Zhou, Kang Yong Lee*, Thermo-electro-mechanical contact behavior of a finite piezoelectric layer under a sliding punch with frictional heat generation, Journal of the Mechanics and Physics of Solids, 2011, 59(5), pp. 1037-1061.
36 Kang Yong Lee*, Dae Ki Jeong, Jae Hyung Kim, Simulational study of electrical contact degradation under fretting corrosion, Tribology International, 2011, 44(12), pp. 1651-1658.
37 Xian-Fang Li, Bao-Lin Wang, Kang Yong Lee*, Size effect in transverse mechanical behaviour of one dimentional nanostructure, Physica E, 2011, 44(1), pp. 207-214.
38 Yue Ting Zhou, Kang Yong Lee*, Exact two-dimensional contact analysis of piezomagnetic materials indented by a rigid sliding punch, Journal of Applied Mechanics, 2012, 79(4), p.041011
39 Yong-Dong Li, Kang Yong Lee*, Three dimensional axisymmetric problem in piezoelectric media: Revisited by a real fundamental solutions based new method, Applied Mathematical Modelling, 2012, 36(12), pp.6100–6113.
40 Yue-Ting Zhou, Kang Yong Lee*, Xing Li, Transient response of a functionally graded strip with heat convection supply from the well stirred fluid with heat sink, Heat transfer Engineering, 2013, 34(7), pp.617-628
41 Yue-Ting Zhou, Kang Yong Lee*, Dynamic behavior of a moving frictional punch over the surface of anisotropic materials, Applied mathematical Modeling, 2014, 38(9-10), pp.2311-2327.
42 Hyung Goun Joo, Kang Yong Lee*, Effect of boron on wear and erosion of WC-Ni vacuum brazed coating, International Journal of Materials Research, 2014, 105(8), pp.802-809.