姓名：杨宇星
性别：男
职称：讲师
办公地点：综合楼516
学位：工学博士
教育经历：
2010年9月—2014年7月 大连理工大学机械工程学院机械制造及其自动化专业 工学学士
2014年9月—2019年9月 大连理工大学机械工程学院机械制造及其自动化专业 工学博士
工作经历：
2019年9月—至今 大连海事大学轮机工程学院 讲师
研究方向：
船用复合材料力学性能研究，海洋工程装备连接质量研究，有限元仿真分析
代表性成果：
1. Yuxing Yang, Xueshu Liu, Yi-Qi Wang, Hang Gao, Rupeng Li, Yongjie Bao. A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending. Composites Science and Technology, 2017, 151: 85-93. [SCI IF: 6.309]
2. Yang Y, Liu X, Wang Y Q, et al. An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming. Composite Structures, 2018, 187: 18-26. [SCI IF: 4.829]
3. Yang Y., Wang Y.-Q., Liu X., Gao H., Bao Y. The effect of shimming material on flexural behavior for composite joints with assembly gap [J]. Composite Structures, 2019, 209:375-382. [SCI IF: 4.829]
4. Xueshu Liu, Yuxing Yang, Li Huang, Ping Zhang, and Hang Gao. Numerical Analysis of the Influences of Geometrical Deviation on Delamination in Composite Laminates around the Countersunk Hole. International Journal of Aerospace Engineering, vol. 2018, Article ID **, 11 pages, 2018. doi:10.1155/2018/**. [SCI IF: 1.132]
5. Xueshu Liu, Yuxing Yang, Yiqi Wang, Yongjie Bao, and Hang Gao. Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints. International Journal of Polymer Science, vol. 2017, Article ID **, 11 pages, 2017. doi:10.1155/2017/**. [SCI IF: 1.892]
6. Xueshu Liu, Junhao Chang, Yuxing Yang, Yiqi Wang, Yongjie Bao and Hang Gao. Evaluation of assembly gap from 3D laser measurements via FEA simulation. 2018. [SCI]
7. Xueshu Liu, Yuxing Yang, Hang Gao, Yongjie Bao, Rupeng Li, Lei Chen. Effects of Hole-Perpendicularity Error on Joint Stiffness of Single-Lap Double-Bolt Composite Joints. Engineering Transactions, 2017, 65 (2): 289-305. [EI]
8.高航,王建, 杨宇星，刘学术，陈磊，李汝鹏. 垂直度误差对复合材料单钉连接性能的影响. 航空学报, 2017, 38(2):285-293. [EI]
9.刘学术,杨宇星,鲍永杰,高航,李汝鹏.垂直度误差影响复合材料层合板层间应力分析[J].机械科学与技术,2018,37(01):138-147.
10. Yuxing Yang, Yi-Qi Wang, Xueshu Liu, Yongjie Bao, Hang Gao. A stiffness model for unidirectional composite bolted joints. ICCM 21, 2017.
11. Yuxing Yang, Yi-Qi Wang, Xueshu Liu, Yongjie Bao, Hang Gao. The shimming effects on bearing response of the single-lap bolted composite joints. ACCM 10, 2016.
12. Yuxing Yang, Yi-Qi Wang, Xueshu Liu, Hang Gao. A Progressive Damage Model for Composites with Considering Prediction of Damage Evolution Stages. CCCM 3, 2017.