姓 名 吴沛东 性 别 男
出生年月 1962年3月 籍贯
民 族 汉族 政治面貌
最后学历 最后学位 工学博士
技术职称 教授 导师类别 博导
行政职务 Email peidong@McMaster.ca
工作单位 中国矿业大学力学与建筑工程学院 邮政编码 221116
通讯地址 江苏省徐州市大学路1号
单位电话
个人主页


个人简介
Dr.Wu Peidong,male,bron in March 1962 in Jiangyin City,Jiangsu Province is a professor and doctoral superbisor of the McMaster University in Canada.He got the Doctor’s Degree of Engineering in the Delft University of Technology.
Prof.Wu Peidong is a member of NSERC Canada International Fellow,and the standing director of execllent science centre in Ontario,Canada.He is the editor-in-chief of various journals,including Computational Materials Science, International Journal of Engineering Sciences,and International Journal of Mechanical Sciences.
Prof.Wu Peidong has been actively advocating Constitutive Modeling of Engineering Materials and their Composites; Computational Mechanics ;Numerical simulation of surface instabilities and material instabilities ;Multiscale modelling of size effect in manufacture processes.He applied four projects by himself and attend the five programmes with others in last three years,such as Project entitled “Strain gradient plasticity theories and their application to sheet metal forming”,“Characterizing tool wear under high performance green manufacturing conditions”,“Multi-scale development of advanced ultra-high strength steels and structures” and “Microstructural modelling of sheet metal formablilty”.
Prof.Wu Peidong has been rewarded many honors and prizes in his unremitting efforts for scientific research:
(1)International Journal of Plasticity Medal(2009)；
(2)Early Researcher Award, Ministry of Research and Innovation of Ontario (2007)；
(3)Paper “Evaluation of biaxial forming limits by bulge testing” was awarded The Best Technical Paper of Novelis in Year 2006；
(4)Paper “Analysis of roping in AA6111 automotive sheet” was awarded The Best Technical Paper of Alcan in Year 2003.
Prof.Wu Peidong has given many keynote lectures and attended Conference International Scientific Committees：
(1)The International Symposium on Plasticity and its Current Applications;
(2)St. Kitts, USA, 3-8 January 2010 ;
(3)St. Thomas, Virgin Island, USA, 3-8 January 2009;
(4)Hawaii, USA, 3-8 January 2008;
(5)The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal FormingProcesses (NUMISHEET 2011), Seoul, Republic of Korea, 21–26 August 2011;
(6)The 10th International Conference on Numerical Methods of Industrial Forming Processes (NUMIFORM 2010), Pohang, Korea, 14–18 June 2010;
(7)International Conference on Fracture and Damage of Advanced Materials,Hangzhou, China, 10–14 August 2004;
(8)The 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications,Sydney, Australia, 2–6 December 2002.
Prof.Wu Peidong has published98 papers in foreige periodicals which all are indexed by SCI and 39 papers on acdemic conferences.He has rewarded one patent at state level.


获奖、荣誉称号
(1) International Journal of Plasticity Medal (2009)
(2) Early Researcher Award, Ministry of Research and Innovation of Ontario (2007)
(3) Paper “Evaluation of biaxial forming limits by bulge testing” was awarded The Best Technical Paper of Novelis in Year 2006.
(4) Paper “Analysis of roping in AA6111 automotive sheet” was awarded The Best Technical Paper of Alcan in Year 2003.
(5) NSERC Canada International Fellow (August 1994 – July 1996)

社会、学会及学术兼职
Journal Referee (~12 papers/year)

1.Computational Materials Science
8. International Journal of Engineering Sciences

2.European Journal of Mechanics A/Solids
9. International Journal of Mechanical Sciences

3.intercontinental Journal of Plasticity
10.International Journal of Solids and Structures

4.Journal of Applied Mechanics – Transactions of the ASME
11.Journal of Engineering Materials and Technology – Transactions of the ASME

5.Journal of Materials Processing Technology
12.Journal of the Mechanics and Physics of Solids

6.Metallurgical and Materials Transactions A
13.Metallurgical and Materials Transactions B

7.Modelling and Simulation in Materials Science and Engineering
14.Steel Research International
15.Tribology International

Conference International Scientific Committees
The 11^th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2013), Shenyang, China, 6-10 July 2013.
The 8^th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Seoul, Republic of Korea, 21–26 August 2011.
The 10^th International Conference on Numerical Methods of Industrial Forming Processes (NUMIFORM 2010), Pohang, Korea, 14–18 June 2010.
International Conference on Fracture and Damage of Advanced Materials, Hangzhou, China, 10–14 August 2004.
The 6^th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, Sydney, Australia, 2–6 December 2002.
External Grant Reviewer
Natural Sciences and Engineering Research Council of Canada (NSERC)
Ontario Centre of Excellence (OCE)


研究领域

Constitutive Modeling of Engineering Materials and their Composites
Computational Mechanics
Biomechanics
Sheet Metal Forming

科研项目

起止时间 项目性质和来源 经费总额 参与人数 申报人的具体职位和任务
2008 - 2012 NSERC Strategic Network $5,000,000 18 Professors
2008 - 2012 Ministry of Research & Innovation $150,000 1 Professors
2008 - 2011 Ontario Centre of Excellence $557,458 2 Professors
2010 - 2012 NSERC CRD $238,000 5 Professors
2006 - 2010 NSERC Discovery $115,000 1 Professor
2007 - 2010 Ontario Centre of Excellence $84,000 1 Professor
2007 - 2009 NSERC CRD $234,000 1 Professor
2007 - 2010 NSERC Strategic $288,000 2 Professors

1.2011-2013 深部岩土力学与地下工程国家重点实验室开放基金：IMPROVED EVPSC MODEL FOR PREDICTING MECHANICAL BEHAVIOR OF ROCKS (SKLGDUEK1102)
2. 2008-2012 Natural Sciences and Engineering Research Council of Canada(NSERC): Magnesium Strategic Research Network.
3. 2008-2012 Ministry of Reserach and Innovation
4. 2008-2011 Ontario Centre of Excellence
5.2010-2012 NSERC CRD
6.2006-2010 NSERC Discovery
7.2007-2010 Ontario Centre of Excellence
8. 2007-2009 NSERC CRD
9.2007-2010 NSERC Strategic

发表论文
Hua, X., Qiao, H., Zhang, P., Duan, Q.Q., Wang, Q., Wu, P.D., Li, S.X. & Zhang, Z.F. (2014): “The anisotropy and diverse mechanical properties of rolled Mg-3% Al-1% Zn alloy,” Materials Science and Engineering/A, (in press).
Wang, H., Wu, P.D. & Wang, J. (2014): "Understanding the role of slips and twins in magnesium alloys under cyclic shear," Computational Materials Science, (in press).
Qiao, H., Agnew, S.R. & Wu, P.D. (2015): “Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading,” International Journal of Plasticity, 65, 61—84.
Wu, W., Qiao, H., An, K., Guo, X.Q., Wu, P.D. & Liaw, P.K. (2014): “Investigation of deformation dynamics in a wrought magnesium alloy,” International Journal of Plasticity, 62, 105—120.
Shi, Y., Jin, H., Wu, P.D., Lloyd, D.J. & Embury, J.D. (2014): “Failure analysis of fusion alloy AA3003/AA6xxx sheet under bending,” Materials Science and Engineering, A610, 263—272.
Lee, S.Y., Wang, H., Gharghouri, M.A., Nayyeri, G., Woo, W., Shin, E., Wu, P.D., Poole, W.J., Wu, W. & An, K. (2014): “Deformation behavior of solid-solution-strengthened Mg-9wt%Al alloy: In-Situ Neutron Diffraction and Elastic-Viscoplastic Self-Consistent Modeling,” Acta Materialia, 73, 139-148.
Fraser, M., Zurob, H., Wu, P.D. & Bouaziz, O. (2014): “Analytical model of the unbending behaviour of corrugated reinforcements,” Advanced Engineering Materials, 16, 872—877.
Shi, Y., Wu, P.D. & Lloyd, D.J. (2014): “Effect of rate sensitivity on necking behavior of laminated tube under dynamic loading,” Journal of Applied Mechanics, 81, article number 051010.
Hu, X.H., Wu, P.D., Lloyd, D.J. & Embury, J.D. (2014): “Enhanced formability in sheet metals produced by cladding a high strain-rate sensitive layer,” Journal of Applied Mechanics, 81, article number 021007.
Guo, X.Q., Wu, W., Wu, P.D., Qiao, H., An, K. & Liaw, P.K. (2013): “On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion,” Scripta Materialia, 69, 319—322.
Wang, H., Wu, P.D., Wang, J. & Tome, C.N. (2013): “A physics-based crystal plasticity model for Hexagonal Close Packed (HCP) crystals including both twinning and detwinning mechanisms,” International Journal of Plasticity, 49, 36—52.
Wang, H., Wu, P.D. & Wang, J. (2013): “Modeling inelastic behavior of magnesium alloys during cyclic loading-unloading,” International Journal of Plasticity, 47, 49—64.
Wang, H., Clausen, B., Tome, C.N. & Wu, P.D. (2013): “Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension,” Acta Materialia, 61, 1179—1188.
Wu, P.D., Wang, H. & Neale, K.W. (2012): “On the large strain torsion of HCP polycrystals,” International Journal of Applied Mechanics 4, article number ** (27 pages).
Wang, H., Wu, P.D., Tome, C.N. & Wang, J. (2012): “A constitutive model of twinning and detwinning for hexagonal close packed polycrystals,” Materials Science and Engineering, A555, 93—98.
Wang, H., Wu, P.D., Tome, C.N. & Wang, J. (2012): “Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model,” International Journal of Solids and Structures, 49, 2155—2167.
Wang, H., Wu, P.D., Boyle, K.P. & Neale, K.W. (2011): “On crystal plasticity formability analysis for magnesium alloy sheets,” International Journal of Solids and Structures, 48, 1000—1010.
Hu, X.H., Wilkinson, D.S., Jain, M., Wu, P.D. & Mishra, R.K. (2011): “The impact of particle distributions and grain-level inhomogeneities on post-necking deformation and fracture in AA5754 sheet alloys during uniaxial tension,” Materials Science and Engineering, A528, 2002—2016.
Wang, H., Wu, P.D. & Neale, K.W. (2010): “Numerical analysis of large strain simple shear and fixed-end torsion of HCP polycrystals,” CMC-Computers, Materials & Continua, 19, 255—284.
Wang, H., Wu, P.D. & Neale, K.W. (2010): “On the role of the constitutive model and basal texture on the mechanical behavior of magnesium alloy AZ31B sheet,” Journal of Zhejiang University - Science, A11, 744—755.
Wang, H., Raeisinia, B., Wu, P.D., Agnew, S.R. & Tome, C.N. (2010): “Evaluation of polycrystal plasticity models for HCP materials,” International Journal of Solids and Structures, 47, 2905—2917.
Shi, Y., Wu, P.D., Lloyd, D.J. & Embury, J.D. (2010): “Crystal plasticity based analysis of localized necking in aluminum tube under internal pressure,” European Journal of Mechanics A/Solids, 29, 475—483.
Hu, X.H., Wilkinson, D.S., Jain, M., Wu, P.D. & Mishra, R.K. (2010): “A macro-micro multi-level modeling scheme to study the effect of particle distribution on wrap-bendability of AA5754 sheet alloys,” Journal of Materials Processing Technology, 210, 1232—1242.
Wang, H., Wu, P.D. & Gharghouri, M.A. (2010): “Effect of basal texture on anisotropy and formability of AZ31 sheets,” Materials Science and Engineering, A527, 3588—3594.
Chen, X.X., Wu, P.D., Lloyd, D.J., Embury, J.D. & Huang, Y. (2010): “Enhanced ductility in sheet metals produced by cladding a ductile layer,” Journal of Applied Mechanics, 77, article number 041015 (7 pages).
Li, B., Nye, T.J. & Wu, P.D. (2010): “Predicting the forming limit diagram of AA5182-0,” Journal of Strain Analysis for Engineering Design, 45, 255—273.
Wang, H., Wu, P.D., Tome, C.N. & Huang, Y. (2010): “A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials,” Journal of the Mechanics and Physics of Solids, 58, 594—2612.
Chen, X.X., Wu, P.D., Embury, J.D. & Huang, Y. (2010): “Enhanced ductility in round tensile bars produced by cladding a ductile ring,” Modelling and Simulation in Materials Science and Engineering, 18, article number 025005 (18 pages).
Wu, P.D., Chen, X.X., Lloyd, D.J. & Embury, J.D. (2010): “Effects of superimposed hydrostatic pressure on fracture in sheet metals under tension,” International Journal of Mechanical Sciences, 52, 236—244.
Hu, X.H., Cingara, G.A., Wilkinson, D.S., Jain, M., Wu, P.D. & Mishra, R.K. (2009): “Studies of texture gradients in the localized necking band of AA5754 by EBSD and FEM,” CMC – Computers, Materials and Continua, 14, 99—123.
Chen, B., Wu, P.D. & Gao, H. (2009): “A characteristic length for stress transfer in the nanostructure of biological composites,” Composites Science and Technology, 69, 1160—1164.
Peng, J., Wu, P.D., Huang, Y., Chen, X.X., Embury, J.D., Lloyd, D.J. & Neale, K.W. (2009): “Effects of superimposed hydrostatic pressure on fracture in round bars under tension,” International Journal of Solids and Structures, 46, 3741—3749.
Chen, B., Wu, P.D. & Gao, H. (2009): “Geometry- and velocity-constrained cohesive zones and mixed mode fracture/adhesion energy of interfaces with periodic cohesive interactions,” Proceedings of the Royal Society of London, A465, 1043—1053.
Wu, P.D., Embury, J.D., Lloyd, D.J., Huang, Y. & Neale, K.W. (2009): “Effect of superimposed hydrostatic pressure on sheet metal formability,” International Journal of Plasticity, 25, 1711—1725.
Chen, B., Wu, P.D. & Gao, H. (2009): “Pre-tension generates strongly reversible adhesion of a spatula pad on substrate,” Journal of the Royal Society Interface, 6, 529—537.
Chen, B., Wu, P.D. & Huang, Y. (2008): “Detaching speed of a gecko toe,” Applied Physics Letters, 93, article number 103901 (3 pages).
Kang, J., Wilkinson, D.S., Bruhis, M., Jain, M., Wu, P.D., Embury, J.D. & Mishra, R.K. (2008): “Shear localization and damage in AA5754 aluminum alloy sheets,” Journal of Materials Engineering and Performance, 17, 395—401.
Chen, B., Wu, P.D. & Gao, H. (2008): “Hierarchical microstructures allow Gecko to control adhesion on a vertical surface,” Proceedings of the Royal Society of London, A464, 1639—1652.
Shi, Z.F., Huang, B., Tang, H., Huang, Y., Zhang, T.Y., Wu, P.D., Hwang, K.C. & Gao, H. (2008): “Determination of the microscale stress-strain curve and strain gradient effect from the micro-bend of ultra-thin beams,” International Journal of Plasticity, 24, 1606—1624.
Kang, J., Wilkinson, D.S., Wu, P.D., Bruhis, M., Jain, M., Embury, J.D. & Mishra, R.K. (2008): “Constitutive behavior of AA5754 sheet materials at large strains,” ASME Journal of Engineering Materials and Technology, 130, article number 031004 (5 pages).
Kang, J., Hu, X., Wright, S.I., Wu, P.D., Wilkinson, D.S. & Mishra, R.K. (2008): “On the calculation of volume fraction of texture components in AA5754 sheet materials,” Metallurgical and Materials Transactions A, 39A, 2007—2013.
Jin, H., Wu, P.D. & Lloyd, D.J. (2007): “Comparison of Grain Structures and Textures in AA5754 Aluminum Alloy Sheets Processed by Room Temperature Rolling and Rolling with Liquid Nitrogen,” Materials Science Forum, 558—559, 217—222.
Wang, H., Hwang, K.C., Huang, Y., Wu, P.D., Ravichandran, G., Han, C.S. & Gao, H. (2007): “A conventional theory of strain-gradient crystal plasticity based on the Taylor dislocation model,” International Journal of Plasticity, 23, 1540—1554.
Wu, P.D., Lloyd, D.J., Jain, M., Neale, K.W. & Huang, Y. (2007): “Effects of spatial grain orientation distribution and initial surface topography on sheet metal necking,” International Journal of Plasticity, 23, 1084—1104.
Shi, Y., MacEwen, S.R., Hamstra, P., Mallory, R. & Wu, P.D. (2007): “Numerical simulation of pressure ram forming process,” Journal of Materials Processing and Technology, 182, 411—417.
Wu, P.D., Lloyd, D.J. & Huang, Y. (2006): “Correlation of ridging and texture in ferritic stainless steel sheet,” Materials Science and Engineering, A427, 241—245.
Yun, G., Hwang, K.C., Huang, Y., Wu, P.D. & Liu, C. (2006): “Size effect in tension of thin films on substrate: A study based on the reformulation of mechanism-based strain gradient plasticity,” Philosophical Magazine, 86, 5553—5566.
Wu, P.D., Huang, Y. & Lloyd, D.J. (2006): “Studying grain fragmentation in ECAE by simulating simple shear,” Scripta Materialia, 54, 2107—2112.
MacEwen, S.R., Shi, Y., Hamstra, P., Mallory, R. & Wu, P.D. (2006): “Evaluation of biaxial forming limits by bulge testing,” Materials Science Forum, 519—521, 117—124.
Wu, P.D. & Lloyd, D.J. (2006): “Influence of spatial grain orientation distribution on sheet metal necking,” Materials Science Forum, 519—521, 103—110.
Wu, P.D., Jin, H., Shi, Y. & Lloyd, D.J. (2006): “Analysis of ridging in ferritic stainless steel sheet,” Materials Science and Engineering, A423, 300—305.
Yun, G., Hwang, K.C., Huang, Y. & Wu, P.D. (2005): “A reformulation of mechanism-based strain gradient plasticity,” Philosophical Magazine, 85, 4011—4029.
Wu, P.D. & Lloyd, D.J. (2005): “Correlation of roping and texture in AA6111 automotive sheet,” Modelling and Simulation in Materials Science and Engineering, 13, 981—991.
Wu, P.D., MacEwen, S.R., Graf, A., Jain, M. & Neale, K.W. (2005): “On forming limit stress diagram analysis,” International Journal of Solids and Structures, 42, 2225—2241.
Qu, S., Siegmund, T., Huang, Y., Wu, P.D., Zhang, F. & Hwang, K.C. (2005): “A study of particle size effect and interface fracture in aluminum alloy composite via an extended conventional theory of mechanism-based strain gradient plasticity,” Composites Science and Technology, 65, 1244—1253.
Jin, H., Wu, P.D., Ball, M.D. & Lloyd, D.J. (2005): “Three dimensional texture determination of a 6111 aluminum alloy sheet by precise serial sectioning and EBSD measurement,” Materials Science and Technology, 21, 419—428.
Wu, P.D., MacEwen, S.R., Lloyd, D.J., Jain, M., Tugcu, P. & Neale, K.W. (2005): “On pre-straining and the evolution of material anisotropy in sheet metals,” International Journal of Plasticity, 21, 723—739.
Qu, S., Huang, Y., Jiang, H., Liu, C., Wu, P.D. & Hwang, K.C. (2004): “Fracture analysis in the conventional theory of mechanism-based strain gradient (CMSG) plasticity,” International Journal of Fracture, 129, 199—220.
Wu, P.D. & Lloyd, D.J. (2004): “Analysis of surface roughening in AA6111 automotive sheet,” Acta Materialia, 52, 1785—1798.
Tugcu, P., Neale, K.W., Wu, P.D. & Inal, K. (2004): “Crystal plasticity simulation of the hydrostatic bulge test,” International Journal of Plasticity, 20, 1603—1653.
Jiang, H., Feng, X-Q., Huang, Y., Hwang, K.C. & Wu, P.D. (2004): “Defect nucleation in carbon nanotubes under tension and torsion,” Computer Methods in Applied Mechanics and Engineering, 193, 3419—3429.
Wu, P.D., MacEwen, S.R., Lloyd, D.J. & Neale, K.W. (2004): “A mesoscopic approach for predicting sheet metal formability,” Modelling and Simulation in Materials Science and Engineering, 12, 511—527.
Chen, B., Huang, Y., Liu, C., Wu, P.D. & MacEwen, S.R. (2004): “A dilatational plasticity theory for viscoplastic materials,” Mechanics of Materials, 36, 679—689.
Chen, B., Huang, Y., Gao, H. & Wu, P.D. (2004): “Shear crack propagation along weak planes in solids: A finite deformation analysis incorporating the linear harmonic potential,” International Journal of Solids and Structures, 41, 1—14.
Wu, P.D., MacEwen, S.R., Lloyd, D.J. & Neale, K.W. (2004): “Effect of cube texture on sheet metal formability,” Materials Science and Engineering, A364, 182—187.
Neale, K.W., Inal, K. & Wu, P.D. (2003): “Effects of texture gradients and strain paths on localization phenomena in polycrystals,” International Journal of Mechanical Sciences, 45, 1671—1686.
Wu, P.D., Lloyd, D.J. & MacEwen, S.R. (2003): “A simple model describing roping in Al sheet,” Scripta Materialia, 48, 1243—1248.
Dawson, P.R., MacEwen, S.R. & Wu, P.D. (2003): “Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture,” International Materials Reviews, 48, 86—122.
Wu, P.D., Lloyd, D.J., Bosland, A., Jin, H. & MacEwen, S.R. (2003): “Analysis of roping in AA6111 automotive sheet,” Acta Materialia, 51, 1945—1957.
Neale, K.W., Inal, K. & Wu, P.D. (2003): “Numerical modelling of large-strain phenomena in polycrystalline solids,” Key Engineering Materials, 233—236, 35—46.
Wu, P.D., Jain, M., Savoie, J., MacEwen, S.R., Tugcu, P. & Neale, K.W. (2003): “Evaluation of anisotropic yield functions for aluminum sheets,” International Journal of Plasticity, 19, 121—138.
Zhang, P., Klein, P., Huang, Y., Gao, H. & Wu, P.D. (2002): “Numerical simulation of cohesive fracture by the Virtual-Internal-Bond model,” Computer Modelling in Engineering & Sciences, 3, 263—277.
Tugcu, P., Wu, P.D. & Neale, K.W. (2002): “On the predictive capabilities of anisotropic yield criteria for metals undergoing shearing deformations,” International Journal of Plasticity, 18, 1219—1236.
Inal, K., Wu, P.D. & Neale, K.W. (2002): “Finite element analysis of localization deformation in FCC polycrystalline sheets under plane stress tension,” International Journal of Solids and Structures, 39, 3469—3486.
Inal, K., Wu, P.D. & Neale, K.W. (2002): “Large strain behaviour of aluminum sheets subjected to in-plane simple shear,” Modelling and Simulation in Materials Science and Engineering, 10, 237—252.
Inal, K., Wu, P.D. & Neale, K.W. (2002): “Instability and localized deformation in polycrystalline solids under plane strain tension,” International Journal of Solids and Structures, 39, 983—1002.
Wu, P.D., Inal, K., Neale, K.W., Kenny, L.D., Jain, M. & MacEwen, S.R. (2001): “Large strain behaviour of very thin aluminum sheets under planar simple shear,” Journal de Physique IV, 11, 229—236.
Tugcu, P., Neale, K.W., Wu, P.D. & MacEwen, S.R. (2001): “Effect of planar anisotropy on wrinkle formation tendencies in curved sheets”, International Journal of Mechanical Sciences, 43, 2883—2897.
Wu, P.D., Graf, A., Jain, M. & MacEwen, S.R. (2000): “On alternative representation of forming limits,” Key Engineering Materials, 177—180, 517—522.
Inal, K., Wu, P.D. & Neale, K.W. (2000): “Simulation of earing in textured aluminum sheets,” International Journal of Plasticity, 16, 635—648.
Wu, P.D., Van der Giessen, E. & Neale, K.W. (1999): “Computational aspects of network models for rubber elasticity,” Journal of China University of Mining & Technology, 9, 97—102.
Tugcu, P., Wu, P.D. & Neale, K.W. (1999): “Finite strain analysis of simple shear using recent anisotropic yield criteria,” International Journal of Plasticity, 15, 939—962.
Wu, P.D., Neale, K.W., Van der Giessen, E., Jain, M., Makinde, A. & MacEwen, S.R. (1998): “Crystal plasticity FLD analysis of rolled aluminum sheets,” Metallurgical and Materials Transactions, 29A, 527—535.
Savoie, J., Jain, M., Car, A.R., Wu, P.D., Neale, K.W., Zhou, Y. & Jonas, J.J. (1998): “Predictions of forming limit diagrams using crystal plasticity models,” Materials Science and Engineering, A257, 128—133.
Steenbrink, A.C., Van der Giessen, E. & Wu, P.D. (1998): “Studies on the growth of voids in amorphous glassy polymers,” Journal of Materials Science, 33, 3162—3175.
Wu, P.D., Neale, K.W. & Van der Giessen, E. (1997): “On crystal plasticity FLD analysis,” Proceedings of the Royal Society of London, A453, 1831—1848.
Steenbrink, A.C., Van der Giessen, E. & Wu, P.D. (1997): “Void growth in glassy polymers,” Journal of the Mechanics and Physics of Solids, 45, 405—437.
Wu, P.D., Neale, K.W. & Van der Giessen, E. (1996): “Simulation of the behavior of FCC polycrystals during reversed torsion,” International Journal of Plasticity, 12, 1199—1219.
Wu, P.D. & Van der Giessen, E. (1996): “Computational aspects of localized deformations in amorphous glassy polymers,” European Journal of Mechanics A/Solids, 15, 799—823.
Wu, P.D. & Van der Giessen, E. (1995): “On network descriptions of mechanical and optical properties of rubbers,” Philosophical Magazine, 71, 1191—1206.
Wu, P.D. & Van der Giessen, E. (1995): “On neck propagation in amorphous glassy polymers,” International Journal of Plasticity, 11, 211—235.
Wu, P.D., Neale, K.W. & Van der Giessen, E. (1994): “Large strain torsion of axially constrained solid rubber bars,” Acta Mechanica Sinica, 10, 136—149.
Wu, P.D. & Van der Giessen, E. (1994): “Analysis of shear band propagation in amorphous glassy polymers,” International Journal of Solids and Structures, 31, 1493—1517.
Wu, P.D. & Van der Giessen, E. (1993): “On large strain inelastic torsion of glassy polymers,” International Journal of Mechanical Sciences, 35, 935—951.
Wu, P.D. & Van der Giessen, E. (1993): “On improved network models for rubber elasticity and their applications to orientation hardening in glassy polymers,” Journal of the Mechanics and Physics of Solids, 41, 427—456.
Van der Giessen, E., Wu, P.D. & Neale, K.W. (1992): “On the effect of plastic spin on large strain elastic-plastic torsion of solid bars,” International Journal of Plasticity, 8, 773—801.
Wu, P.D. & Van der Giessen, E. (1992): “On improved network models for rubber elasticity,” Mechanics Research Communications, 19, 427—433.
Wu, P.D. & Van der Giessen, E. (1991): “Analysis of elastic-plastic torsion of circular bars at large strains,” Archive of Applied Mechanics, 61, 89—103.

科研创新
MacEwen, S.R. & Wu, P.D. (2004): “Method of using isotropic plasticity to model the forming of anisotropic sheet,” US Patent 6,731,996, 2004.