职称
教授

办公室
机械楼

联系电话


E-mail
gfsun@seu.edu.cn

学习经历

2000年9月-2004年7月，东北大学尖子班，材料科学与工程，本科/学士；

2004年9月-2009年7月，东北大学，材料学，硕博连读研究生/博士；

2007年10月-2008年10月，美国密歇根大学，工学院机械系，激光辅助智能制造中心(CLAIM)，联合培养博士，师承于美国工程院院士Jyoti Mazumder教授。

工作经历

2009年7月-2014年3月：江苏大学，机械工程学院，讲师、副教授、硕士生导师；

2010年4月-2010年10月：美国密歇根大学，工学院机械系，激光辅助智能制造中心(CLAIM)，研究****(Research scholar)

2014年3月-2017年4月：东南大学，机械工程学院机制系，副教授/硕导；
2017年4月-至今：东南大学，机械工程学院机制系，教授/硕导/博导

教授课程

工程材料及制造技术基础

先进制造技术(全英文)

先进激光制造技术
研究方向

1. 水下激光增材制造、激光表面工程(激光熔覆、激光合金化、激光熔凝、激光重熔)、激光焊接

2. 激光加工过程中熔池视觉检测、缺陷预测、光谱分析检测、闭环控制等

3.激光与材料相互作用、冶金学原理、微观组织演变、相变、热/动力学原理、残余应力分析、疲劳、腐蚀、磨损、断裂失效机制。
欢迎机械类、材料类、光学、控制等专业的学生报考研究生、博士生。

获奖情况

江苏省“”六大人才高峰“高层次人才”
中国机械工业联合会一等奖

论文著作

书籍章节

[1]GF Sun, R Zhou. Chapter 3: Mechanical properties improvement of metallic rolls by laser surface alloying. In the Book Laser surface engineering: Processes and applications. Edited by Jonathan Lawrence and David Waugh. Published by Woodhead Publishing Limited. 2015, 59-96.

期刊论文

[43] ZD Wang, GF Sun*, MZ Chen, Y Lu, SB Zhang, HF Lan, KD Bi, ZH Ni*. Investigation of the underwater laser directed energy deposition technique for the on-site repair of HSLA-100 steel with excellent performance.Additive Manufacturing,2021,
[42] ZD Wang,GF Sun*, Y Lu, MZ Chen, HF Lan, KD Bi, ZH Ni*. High-performance Ti-6Al-4V with graded microstructure and superior properties fabricated by powder feeding underwater laser metal deposition.Surface & Coatings Technology,2021,408: 126778(SCI)
[41] MZ Chen, Y Lu, ZD Wang, HF Lan,GF Sun*, ZH Ni*. Melt pool evolution on inclined NV E690 steel plates during laser direct metal deposition.Optics & Laser Technology,2021, 136: 106745.
[40] ZD Wang,GF Sun*, Y Lu, MZ Chen, KD Bi, ZH Ni. Microstructural characterization and mechanical behavior of ultrasonic impact peened and laser shock peened AISI 316L stainless steel.Surface & Coatings Technology,2020, 385: 125403. (SCI).
[39]P Yang,GF Sun*, Y Lu, ZH Ni. Monitoring of optical emissions in laser cladding of 316L stainless steel.Applied Optics,2019, 58: 8733-8742. (SCI).
[38]GF Sun*, XT Shen, ZD Wang, MJ Zhan, S Yao, R Zhou ZH Ni. Laser metal deposition as repair technology for 316L stainless steel: Influence of feeding powder compositions on microstructure and mechanical properties.Optics and Laser Technology,2019, 109: 71-83. (SCI).
[37] Y Lu,GF Sun, XF Xiao, J Mazumder. Online stress measurement during laser aided metallic additive manufacturing,Scientific Reports,2019,9: 7630.
[36] Y Lu,GF Sun*, ZD Wang, YK Zhang, BY Su, AX Feng, ZH Ni. Effects of electromagnetic field on the laser direct metal deposition of austenitic stainless steel.Optics and Laser Technology,2019,119: 105586
[35] MJ Zhan,GF Sun*, ZD Wang, XT Shen, Y Yan,ZH Ni. Numerical and experimental investigation on laser metal deposition as repair technology for 316L stainless steel.Optics and Laser Technology,2019,118: 84-92.
[34]GF Sun*, S Yao, ZD Wang, XT Shen, Y Yan, R Zhou ZH Ni. Microstructure and mechanical properties of HSLA-100 steel repaired by laser metal deposition.Surface & Coatings Technology,2018, 351: 198-211. (SCI).
[33]ZD Wang, Y Lu, GF Sun*, ZH Ni. Effect of Ultra-sonic Peening on Laser-Arc Hybrid Welded NV E690 Steel. Journal of Laser Applications,2018,30: 032403. (SCI).
[32]GF Sun*, ZD Wang, Y Lu, R Zhou, ZH Ni, X Gu, ZG Wang. Numerical and experimental investigation of thermal field and residual stress in laser-MIG hybrid welded NV E690 steel plates. Journal of Manufacturing Processes,2018, 34: 106-120. (SCI)
[31] R Zhou, ZP Tong,GF Sun*, ZH Ni, W Zhang. Microstructure and wear behaviour of 38CrMoAl steel laser-processed with addition of MoS2 or WS2.Lasers in Engineering,2018, 41: 1-25. (SCI)
[30] R Zhu, YK Zhang,GF Sun*, XT Shen, P Li. Finite element analysis of surface roughness generated by multiple laser shock peening.Rare Metal Materials and Engineering,2018, 47: 33-38. (SCI)
[29]AM Xiao,GF Sun*,ZP Tong, SY Dong, SX Yan, JZ Lu, YK Zhang. Effect of laser shock processing on microstructure, residual stress and wear-fracture behavior of laser deposited Fe-based alloy coating.Lasers in Engineering,2018, 39: 175-194. (SCI)
[28]孙桂芳*,陶丰,姜波,姬文宣,牛牧遥,沈旭婷.医用不锈钢激光合金化铜钴合金的组织及其生物医学性能.中国激光,2018,45: **. (EI).
[27]JF Wu, SK Zou, YK Zhang, SL Gong, GF Sun*, ZH Ni, ZW Cao, ZG Che, AX Feng.Microstructures and mechanical properties of β forging Ti17 alloy under combined laser shock processing and shot peening.Surface & Coatings Technology,2017, 328: 283-291 (SCI).
[26]GF Sun*, ZD Wang, Y Lu, R Zhou, ZH Ni.Investigation on microstructure and mechanical properties of NV E690steel joint by laser-MIG hybrid welding.Materials and Design,2017, 127: 297-310. (SCI)
[25]朱然,张永康,孙桂芳*, 李普, 张胜标, 倪中华. 三维平顶光束激光冲击2024铝合金的残余应力场数值模拟.中国激光,2017, 44(8): ** (EI).
[24]GF Sun*,XY Fang, ZP Tong, ZH Ni, Y Lu.Effect oflaser shock peening on aluminum alloylaser-welds.Surface Engineering,2016, 32: 943-948. (SCI)
[23]李倩, 孙桂芳*, 卢轶, 张永康. 光纤激光水下切割1 mm厚304不锈钢的实验研究. 中国激光, 2016, 43:**-10 (EI).
[22] GF Sun*, ZP Tong, XY Fang, XJ Liu, ZH Ni, W Zhang.Effect of scanning speeds on microstructure and wear behavior of laser processed NiCr-Cr3C2-MoS2-CeO2 on 38CrMoAl steel.Optics & Laser Technology,2016, 77: 80-90. (SCI)
[21]Y. Lu,GF Sun, D.P. Wen, Y.K. Zhang, A.X. Feng. Effects of applying electric and magnetic fields on laser drilling. The International Journal of Advanced Manufacturing Technology,2016, 84: 2293-2300 (SCI)
[20]GF Sun*, R Zhou, JZ Lu, J Mazumder. Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser deposited AISI 4340 steel. Acta Materialia, 2015, 84: 172-189. (SCI)

[19]GF Sun*, K Wang, R Zhou, AX Feng, W Zhang. Effect of different heat-treatment temperatures on thelaser cladded M3:2 high-speed steel. Materials and Design, 2015, 65: 606-616. (SCI)

[18]GF Sun*, K Wang, R Zhou, ZP Tong, XY Fang. Effect of annealing on microstructure and mechanical properties of laser deposited Co-285 + WC coatings. Optics & Laser Technology, 2015, 66: 98-105. (SCI)

[17]GF Sun*, YK Zhang, MK Zhang, R Zhou, K Wang, CS Liu, KY Luo. Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr-CrB₂. Applied Surface Science, 2014, 295: 94-107. (SCI)

[16]GF Sun*, R Zhou, YK Zhang, GD Yuan, K Wang, XD Ren, DP Wen. Microstructure evolution and lubricant wear performance of laser alloyed layers on automobile engine chains. Optics & Laser Technology, 2014, 62: 20-31. (SCI)

[15]R Zhou, GF Sun*,CS Liu, XD Ren, K Wang, AX Feng, XP Bu. Effects of yttrium on microstructure and wear properties of laser DMD Co-285+WC coatings. Lasers in Engineering, 2015, 31(3-4): 161-178. (SCI)

[14]MK Zhang, GF Sun*,YK Zhang, CS Liu, XD Ren, AX Feng, W Zhang. Laser surface alloying of Cr-CrB₂on SUS 304 stainless steel. Lasers in Engineering, 2014, 27(3-4): 231-245. (SCI)
[13]李鹏, 孙桂芳*, 张尉, 刘卫祥, 张永康, 张满奎.不锈钢表面激光合金化Mn-Al2O3强化层的组织及性能. 中国有色金属学报, 2012，22（8）：2253-2259。(EI)

[12]GF Sun*,S Bhattacharya, GP Dinda, A Dasgupta, J Mazumder. Microstructure evolution during laser aided direct metal deposition of alloy tool steel, Scripta Materialia, 2011, 64: 454-457. (SCI)

[11]GF Sun*,S Bhattacharya, GP Dinda, A Dasgupta, J Mazumder. Influence of processing parameters on lattice parameters in laser deposited tool alloy steel. Materials Science and Engineering: A, 2011, 528: 5141-5145. (SCI)

[10]GF Sun*,R Zhou, P Li, AX Feng, YK Zhang. Laser surface alloying of C-B-W-Cr powders on nodular cast iron rolls. Surface & Coatings Technology, 2011, 205: 2747-2754. (SCI)

[9]GF Sun,CS Liu, LJ Song, J Mazumder. Microstructure and wear behavior of laser-aided direct metal deposited Co-285 and Co-285 +WC coatings. Metallurgy and Materials Transactions: A,2010,41: 1592-1603. (SCI)

[8]GF Sun*,YK Zhang, CS Liu, KY Luo, XQ Tao, P Li. Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr-Cr₃C₂. Materials and Design, 2010,31(6): 2737-2744. (SCI)

[7]GF Sun*,YK Zhang, CS Liu, P Li, XQ Tao. Microstructure and wear resistance enhancement of semi-steel rolls by laser surface alloying of NiCr-Cr₃C₂. Lasers in Engineering, 2010, 19: 347-361. (SCI)

[6]GF Sun*, YK Zhang, CS Liu. Effects of laser surface re-melting on the microstructure and hardness of laser deposited Co-285+WC coatings. Lasers in Engineering, 2010, 20: 9-20. (SCI)
[5] 孙桂芳, 梁京, 陈岁元, 刘常升.碳钢上激光辅助沉积Co-285合金的组织及性能. 中国有色金属学报, 2010，20（2）：274-281。(EI)

[4]S Huang, JZ Zhou, J Sheng, JZ Lu, GF Sun,XK Meng, LD Zuo, HY Ruan. Effects of laser energy on fatigue crack growth properties of 6061-T6 aluminum alloy subjected to multiple laser peening. Engineering Fracture Mechanics, 2013, 99: 87-100. (SCI)

[3]JZ Lu, KY Luo, YK Zhang, GF Sun, YY Gu, JZ Zhou, XD Ren, XC Zhang, LF Zhang, KM Chen, CY Cui, YF Jiang, AX Feng, L Zhang. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel. Acta materialia,2010, 58(16): 5354-5362. (SCI)

[2]HY Wang, DW Zuo, G Chen, GF Sun, XF Li, X Cheng. Hot corrosion behaviour of low Al NiCoCrAlY cladded coatings reinforced by nano-particles on a Ni-base super alloy.Corrosion science, 2010, 52: 3561-3567. (SCI)

[1]JZ Lu, KY Luo, YK Zhang, CY Cui, GF Sun, JZ Zhou, L Zhang, J You, KM Chen, JW Zhong. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts. Acta materialia, 2010, 58: 3984-3994. (SCI)

会议论文

[4]R Zhou, GF Sun*, KK Chen, YQ Tong. Effect of tempering on microstructure and mechanical properties of cast iron rolls laser alloyed with C-B-W-Cr. 2014 Global Conference on Polymer and Composite Materials (PCM 2014),IOP Conf. Series: Materials Science and Engineering,2014, 62: 012015-6. (EI)

[3]GF Sun*, Zhou Rui, Li Peng, Zhang Yongkang. Effects of processing parameters on the laser deposited Co-285 + WC coatings. Key Engineering Materials,2011, 464: 568-571. (EI)

[2]GF Sun, Liu Changsheng, Liang Jing, Zhou Junhua, Tao Xingqi. Laser surface alloying of NiCr-Cr₃C₂and C-B-W-Cr powders on nodular cast iron rolls. Advanced Materials Research, 2009,79-82: 1459-1462. (EI)

[1]GF Sun, Liu Changsheng, Guru P Dinda, Jyoti Mazumder. Laser-AidedDirect Metal Deposition of Co-285. ICALEO, 27^thInternational Congress on Application of Lasers & Electro-Optics, October 20-23, 2008. Pechanga Resort & Casino, Temecula, CA, USA. (ISTP)

科研项目

项目名称
项目类别
项目时间
工作类别
项目金额

水下激光增材制造海工高强钢工艺、冶金原理及性能研究
激光焊接试样缺陷检测及表征
XXX
国家重点实验室开放课题
高校委托课题
XXX
2020.05-2022.04
2018.12-2020.12
2018.01-2020.12
负责人
负责人
第二负责人
8万元
8.4万元
530万元

XXX XX科技委前沿科技创新特区 2017.07-2019.06 负责人 50万元
激光增材构件组织与性能的激光喷丸调控机理
XXX的水下激光增材再制造装置与工艺研究
江苏省六大人才高峰高层次人才
装备预研教育部联合基金
2016.09-2019.08
2016.01-2017.12
负责人
负责人
4万元
80万元

超大型海工装备低应力无余量焊接理论与方法研究 江苏省产学研前瞻性联合研究 2015.07-2017.06 负责人 35万元
电磁场辅助激光成形构件冶金缺陷及力学行为研究 省部级 2016.02-2017.12 负责人 15万元
激光成形金属构件冶金缺陷形成机理及缺陷力学行为研究 省部级 2015.03-2017.02 负责人 8万元
气孔对激光沉积成型件的力学行为影响机理研究
省部级
2015.07-2017.06
负责人
7万元


基于微纳复合粉体的激光熔覆组织的演变特征及强化机制 国家自科青年科学基金项目 2013.01-2015.12 负责人 25万元
高锰钢基复合涂层的激光合金化原位再制造技术研究 江苏省自然科学基金面上项目 2012.07-2014.12 负责人 10万元
激光直接沉积功能梯度涂层的成型机理及其关键问题研究 博后特别资助项目 2012.3-2013.3 负责人 10万元
激光直接沉积功能梯度强化层的工艺及机理研究 教育部博士点新教师基金 2012.02-2015.01 负责人 4万元
高性能、节能型塑料加工技术及设备 江苏省企业博士集聚计划 2011.01-2012.12 负责人 20万元
激光直接沉积强化混料机关键件的工艺及机理研究 博士后面上项目 2010.3-2012.3 负责人 3万元
热轧辊工作层材料的激光辅助金属沉积成形与组织性能 国家自科面上项目 2011.01-2013.12 子课题负责人 7.2万元

专利

专利号
专利名称
专利类型

CN1.6
CN4.5
CN4.9
CN0.4
CN9.X
CN4.9
CN2.X
CN2.7
CN4.9
CN8.0
ZL7.0
ZL0.6
ZL6.5
ZL6.8
ZL1.3
ZL5.8
ZL6.8
ZL3.0
ZL9.5
ZL6.9
ZL6.6
ZL2.3
具有自修复及水下设施修复功能的海洋装备及方法
一种用于水下船体表层缺陷修复的激光熔覆装置及方法
可预热回火的中心送粉式熔覆头
能够进行多路同步送粉增材的激光熔覆头
水下超声频微锻造原位强化激光改性层装置和方法
轴承钢构件及其表面激光熔凝-离子注入复合强化方法
双超声辅助水下激光增材装置和方法
一种具有外保护气结构的激光熔覆同轴送粉喷嘴
能够进行多路同步送粉增材的激光熔覆头
带有鳍式散热片的激光熔覆冷却装置
一种水下设施激光增材修复的方法与装置
一种含有移动气氛室的激光头以及激光增材有色金属的方法
多点激光冲击成形的有限元模拟方法
一种降低激光增材件气孔率的表面强化方法
一种激光增材薄壁件激光喷丸应力调控的方法
一种超大型海工装备低应力无余量焊接方法和装置
模拟海洋环境下激光切割的试验装置
一种水下激光切割用排水装置
一种水下激光切割装置与方法
一种电磁场辅助激光增材制造的装置
一种金相试样预磨机
一种改善层基或膜基结合状态的飞秒激光表面预处理方法
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利
发明专利

ZL2.0
一种冶金热轧辊工作层的激光直接沉积制备方法和装置
发明专利

ZL8.5
强化及修复塑料混合机浆叶和筒体的耐磨耐蚀涂层及其配制方法
发明专利

ZL7.9
一种模拟深海环境的腐蚀试验装置和试验方法
发明专利

ZL0.3
铁路高速重轨激光淬火硬化工艺
发明专利

ZL8.X
铁路道岔激光合金化强化工艺
发明专利

ZL6.7
一种冶金热轧辊表面激光纳米陶瓷合金化的涂料
发明专利

ZL3.1
一种激光冲击与热喷涂复合制备涂层的方法和装置
发明专利