教育经历

1997.9-2001.7，中南大学材料科学与工程专业，本科/学士学位，导师：刘楚明教授。

2001.9-2008.10，中南大学材料加工工程专业，研究生/博士学位，导师：张新明教授。



指导学科
学科专业(主)    080502|材料学    招生类别    硕士    所在学院    材料科学与工程学院
研究方向    ①有色金属的形变热处理研究； ②轻合金剧烈变形机理； ③双金属复合管界面形成机制研究； ④材料表面纳米化工艺研究； ⑤金属管内壁形貌特征研究； ⑥丝杠用金属材料失效研究； ⑦有色金属局部腐蚀机理研究……


发表论文

1)Tao J Q, Jiang Y, Liu Y, Liu Y W, Meng J J, Wang J T*, Preparation of bulk nanolaminated aluminum alloy with high strength[J]. Materials Science and Engineering A, 2019,DOI: 10.1016/j.msea.2019.138556.

2)Meng J J, Li Z, Liu Y, Zhu Y B, Wang S, Lin K, Tao J Q, Wang J T*. Investigation on the Strain Distribution in Tube High-Pressure Shearing[J]. Metals, 2019,9:1117-1120.

3)Liu Y F, Cao Y, Zhou H, Chen X F, Liu Y*, Xiao L R*, Huan X W, Zhao Y H, Zhu Y T, Ade[J], 2019, DOI: 10.1002/adem.201900478

4)Liu Y*, Xiong W, Yang Q, Zeng J, Zhu W, Sunkulp G. Constitutive Behavior and Processing Map of T2 Pure Copper Deformed from 293 to 1073K[J]. Journal of Materials Engineering and Performance, 2018,4: 1812-1824.

5)Zhou Y W, Mao Z N, Liu Y*, Wang J T*. Microstructure Evolution of Copper by Three Roll Planetary Milling[J]. Solid State Phenomena, 2018:44-48.

6)Liu F, Yuan H, Goel S, Liu Y, Wang J T*. Bulk Nanolaminated Nickel: Preparation, Microstructure, Mechanical Property, and Thermal Stability[J]. Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science, 2018,2:576-594.

7)Elmasry M, Liu F, Jiang Y, Mao Z N, Liu Y*, Wang J T*. Negative temperature dependence of recrystallized grain size: Formulation and experimental confirmation on copper[J]. Materials, 2017,3: 308-317.

8)Xiong W, Liu Y*, Zeng J, Mao Z N, Yang Q, Zhou Y W. Physical simulation and process optimization of ACC multiple tube during planetary milling process(1)—constitutive equation and processing map of 3003 aluminum alloy[J]. Materials Science & Engineering of Powder Metallurgy, 2017, 22(4):458-467.

9)Li Z, Zhang P F, Yuan H, Lin K, Liu Y, Yin D L, Wang J T*, Langdon T G. Principle of one-step synthesis for multilayered structures using tube high-pressure shearing[J]. Materials Science and Engineering a, 2016:367-375.

10)Liu F, Liu Y, Wang J*. Estimation of Average Strain Rate during Equal-Channel Angular Pressing[J]. Mater. Sci. Forum, 2016:419-425.

11)Mao Z N, Gu R C, Liu F, Liu Y, Liao X Z, Wang J T*. Effect of equal channel angular pressing on the thermal-annealing-induced microstructure and texture evolution of cold-rolled copper[J]. Materials Science & Engineering a, 2016:186-192.

12)Wang Y, Liu Y, Wang J T*. Investigation on activation volume and strain-rate sensitivity in ultrafine-grained tantalum[J]. Materials Science and Engineering: A, 2015:86-93.

13)Liu Y, Wang J T*, Liu Y, Improved calculation of the contact region distribution between roller and workpiece during three-roll planetary rolling[J], Forging & Stamping Technology(in Chinese),2015, 40(12):60-66

14)Pan Heng-pei, Liu Ying, Wang Jing-tao, Feng Hu-tian, Tian Yi, Tian Mao-lin,Quantitative Analysis of Carbide in GCr15 Bearing Steel after Spheroidizing Annealing[J],Physical Testing and Chemical Analysis Part A:Physical Testing(in Chinese),2015, (10):705-705,710

15)Liu Y, Zhang P F, Chen L J, Zhang H, Zhang X*, Geng Z. Effect of pre-precipitation on localized corrosion properties of 2519A aluminum alloy[J]. Cailiao Gongcheng/Journal of Materials Engineering(in Chinese), 2014,6:11-17.

16)Liu Y*, Zhang X M, Zhang H. Role of secondary phase particles of 2519A aluminum alloy in localized corrosion[J]. Material Research Innovation(S), 2013,17:s83-s88.

17)Liu Y*, Cheng R L, Wang J T, Zhang H, Zhang X M. Effect of Severe Plastic Deformation at Ambient Temperature on Microstructures and Mechanical Properties of Aluminum Alloy 2519[J]. Materials Science Forum, 2013:298-302.

18)Ma S J, Liu Y, Dong X H, Zhang X P*. Microstructure and flow stress of Mg-12Gd-3Y-0.5 Zr magnesium alloy[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2013,1:172-177.

19)Wang Y L, Liu Y, Wang J T*, Tian F S. Microsturcture and properties of T2 copper tube produced by severe hot rolling[J]. Materials Science Forum, 2011:193-198.

20)Li H, Li F, Liang X, Liu Y, Zhang X*. Effect of quenching agent on exfoliation corrosion resistance of 2519 aluminum alloy[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology)(in Chinese), 2009,2:389-394.

21)Zhang X*, Wang W, Liu B, Chen M, Liu Y, Gao Z, Ye L, Jia Y. Effect of Nd addition on microstructures and heat-resisting properties of 2519 aluminum alloy[J]. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals(in Chinese), 2009,1:15-20.

22)Zhang X*, Liu Y, Li H, Tang J, Liu B, Gao H, Li H. Effect of forging and rolling deformation on corrosion resistance of aluminum alloy 2519A plate[J]. Cailiao Kexue Yu Gongyi/Material Science and Technology(in Chinese), 2009,3:301-304.


联系方式

电话： 025-84303983

电子邮箱： liuying517@njust.edu.cn

邮编： 210094

工作单位： 南京理工大学材料学院材料工程系

通讯地址： 江苏省南京市玄武区孝陵卫200号南京理工大学材料学院材料工程系