刘吉梓副教授
硕士生导师




目前就职： 材料科学与工程学院
导师类型/类别： 硕士生导师
个人主页：








10 访问





联系电话：
电子邮箱： jzliu@njust.edu.cn
邮编：
工作单位：
通讯地址：




个人信息
指导学科
社会、学会及学术
出版专著和教材
科研创新
教学活动
发表论文
指导学生情况
其他信息
获奖、荣誉称号



教育经历

工作经历


指导学科
学科专业
080502|材料学 招生类别
硕士
所在学院
材料科学与工程学院


研究方向
从材料科学角度理解材料应用工程问题，做“有用”、“高效”的研究，坚持在工程应用背景下从事基础科学研究，发展新设备、新技术、新方法。
（1）多尺度关联先进表征技术的研究；
（2）材料基因工程：缺陷表征及调控；
（3）高强高韧铝合金材料；
（4）高强高导高韧多功能铜合金材料；
（5）特殊关键件用高性能钢。





社会、学会及学术兼职


出版专著和教材
材料科学研究与测试方法（第三版）


科研创新

科研项目


教学活动
1、??????????,???,80,32
2、??????????,???,24,32



发表论文


主要论著（按照时间顺序）：
金属材料
Jizi Liu*, Rong Hu, Jialing Zheng, Yidong Zhang, Zhigang Ding, Wei Liu, Yuntian Zhu*, Gang Sha*, Formation of solute nanostructures in an AleZneMg alloy during long-term natural aging, Journal of Alloys and Compounds821: 153572, 2020.
Xuzhou Gao, Yiping Lu*, Jizi Liu*, Jun Wang, Tongming Wang, Yonghao Zhao*, Extraordinary ductility and strain hardening of Cr₂₆Mn₂₀Fe₂₀Co₂₀Ni₁₄TWIP high-entropy alloy by cooperative planar slipping and twinning, Materialia8: 100485, 2019.
Yonggui Qin, Sicong Lin, Shenbao Jin, Jizi Liu*, Strengthening Al-Zn-Mg Alloys via Ultra-Fine Lamella Structures Containing a High Density of Dislocations and Clusters, Metals9: 140, 2019.
Yang Jia, Sicong Lin, Jizi Liu*, Yonggui Qin, Kehong Wang, The Influence of Pre- and Post-Heat Treatment on Mechanical Properties and Microstructures in Friction StirWelding of Dissimilar Age-Hardenable Aluminum Alloys, Metals9: 1162, 2019.
Liang Hao, Jiancheng Yan, Sujun Guan, Lijun Cheng, Qian Zhao, Zheng Zhu, Yao Wang, Yun Lu, Jizi Liu^*, Oxygen vacancies in TiO₂/SnO_xcoatings prepared by ball milling followed by calcination and their influence on the photocatalytic activity, Applied Surface Science466: 490-497, 2019.
Yidong Zhang, Shenbao Jin, Patrick W. Trimby, Xiaozhou Liao, Maxim Y. Murashkin, Ruslan Z. Valiev, Jizi Liu, Julie M. Cairney, Simon P. Ringer, Gang Sha*, Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion, Acta Materialia162: 19-32, 2019.
Jizi Liu*, Yonggui Qin, Jialing Zheng, Chao Chen, Ping'an Xiao, New approach to achieve high strength powder metallurgy Ti-6Al-4V alloy through a simplified hydrogenation-dehydrogenation treatment, Journal of Alloys and Compounds763: 111-119, 2018.
Ningning Liang,Jizi Liu*, Sicong Lin, Yue Wang, Jing Tao Wang, Yonghao Zhao, Yuntian Zhu, A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability, Journal of Alloys and Compounds735: 1389-1394, 2018.
S.Y. Yuan, Z.H. Jiang, J.Z. Liu, Y. Tang, Y. Zhang*, Nano-twinning in a γ′ precipitate strengthened Nibased superalloy, MATER. RES. LETT.6(12): 683-688, 2018.
Yang Jia, Yonggui Qin, Yiwen Ou, Kehong Wang and Jizi Liu*, The Influence of Microstructural Heterogeneity on Mechanical Properties of Friction Stir Welded Joints of T6-Treated Al-Zn-Mg Alloy 7A52, Metals8: 527, 2018.
Xuzhou Gao, Yiping Lu, Bo Zhang, Ningning Liang, Guanzhong Wu, Gang Sha, Jizi Liu, Yonghao Zhao, Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy, Acta Materialia141: 59-66, 2017.
Te Hu, Wanglin Chen, Ning Yan, Ningning Liang, Jizi Liu*, On the morphology and crystallography of the strengthening precipitates in an aged Cu-Ni-P alloy, Journal of Alloys and Compounds729: 84-88, 2017.
S.B. Wang, J.Z. Liu, Q. Qi, X.F. Chang, S. Gao, W. Zhang, P. Wang, Precipitate formations with self-adaptive elemental diffusion and segregation in T92 steel, Journal of Alloys and Compounds693: 264-278, 2017.
Liang Hao, Zhenwei Wang, Yaoqing Zheng, Qianqian Li, Sujun Guan, Qian Zhao, Lijun Cheng, Yun Lu, Jizi Liu*, C, N co-doped TiO2/TiC0.7N0.3composite coatings prepared fromTiC0.7N0.3 powder using ball milling followed by oxidation, Applied Surface Science391: 275-281, 2017.
Liang Hao, Sujun Guan, Yun Lu, Wenzhi Qiu, Yiqiang He, Jizi Liu*, Surface topography evolution of TiO2/SnO2 coatings during thermal oxidation of Ti/Sn composite coatings, Surface & Coatings Technology291: 325-333, 2016.
J.Z. Liu, J.H. Chen*, D.W. Yuan, C.L. Wu, T. Hu, J. Zhu, Z.Y. Cheng, Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys, Materials Characterization99: 277-286, 2015.
J.Z. Liu, J.H. Chen*, Z.R. Liu, C.L.Wu, Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part II: Fine precipitation scenarios in AlZnMg(Cu) alloys, Materials Characterization99: 142-149, 2015.
Z. Gao, J.Z. Liu*, J.H. Chen, S.Y. Duan, Z.R. Liu, W.Q. Ming, C.L. Wu, Formation mechanism of precipitate T₁in AlCuLi alloys, Journal of Alloys and Compounds624: 22-26, 2015.
J.Z. liu*, S.S. Yang, S.B. Wang, J.H. Chen, C.L. Wu, The influence of Cu/Mg atomic ratios on precipitation scenarios and mechanical properties of Al-Cu-Mg alloys, Journal of Alloys and Compounds613: 139-142, 2014.
X.B. Yang, J.H. Chen, J.Z. Liu*,F. Qin, J. Xie, C.L. Wu, A high-strength AlZnMg alloy hardened by the T-phase precipitates, Journal of Alloys and Compounds610: 69-73, 2014.
Xiubo Yang, Jizi Liu*, Jianghua Chen, Caiyun Wan, Lei Fang, Ping Liu, Cuilan Wu, Relationship between the strengthening effect and the morphology of precipitates in Al-7.4Zn-1.7Mg-2.0Cu (wt. %) alloy, Acta Metallurgica Sinica (English Letters) 27(6): 1070-1077, 2014.
X.B. Yang, J.H. Chen, J.Z. Liu*, P. Liu, F. Qin, Y.L. Cheng, C.L. Wu, Spherical constituent particles formed by a multistage solution treatment in Al-Zn-Mg-Cu alloys, Materials Characterization83: 79-88, 2013.
T. Hu, J.H. Chen*, J.Z. Liu, Z.R. Liu, C.L. Wu*, The crystallographic and morphologic evolution of the strengthening precipitates in Cu-Ni-Si alloys, Acta Materialia61: 1210-1219, 2013.
Chen ZhenHua, Zhang LiKe, Liu JiZi, Chen Ding*, Cryogenic treatment induced hardening for Cu-Zr-Ag-Al bulk metallic glasses, SCIENCE CHINA-TECHNOLOGICAL SCIENCES56(3): 637-641, 2013.
S.B. Wang, J.H. Chen*, M.J. Yin, Z.R. Liu, D.W. Yuan, J.Z. Liu, C.H. Liu, C.L. Wu*, Double-atomic-wall-based dynamic precipitates of the early-stage S-phase in AlCuMg alloys, Acta Materialia60: 6573-6580, 2012.
J.Z. Liu, J.H. Chen*, X.B. Yang, S. Ren, C.L. Wu, H.Y. Xu, J. Zou, Revisiting the precipitation sequence in Al-Zn-Mg-based alloys by high-resolution transmission electron microscopy, Scripta Materialia63(11): 1061-1064, 2010.
S.Q. Zhu, H.G. Yan*, J.H. Chen, Y.Z. Wu, J.Z. Liu, J. Tian, Effect of twinning and dynamic recrystallization on the high strain rate rolling process, Scripta Materialia63(10): 985-988, 2010.
Su-Qin Zhu, Hong-Ge Yan*, Wei-Jun Xia, Ji-Zi Liu, Jun-Feng Jiang, Influence of different deformation processing on the AZ31 magnesium alloy sheets, Journal of Materials Science44: 3800-3806, 2009.
电子显微学及其在材料科学中的应用：
Xiaotong Li^#, Jizi Liu^#, Shuang Li, Jian Zhang, Di Li, Rui Xu, Qingtang Zhang, Xuemei Zhang, Biao Xu, Yongsheng Zhang^*, Feng Xu, Guodong Tang, Synergistic Band Convergence and Endotaxial Nanostructuring: Achieving UltralowLattice Thermal Conductivity and High Figure of Merit in Eco-friendly SnTe, Nano Energy67: 104261, 2020.
Wuxiang Zhang, Hao Song, Yan Cheng, Chao Liu, Chaohai Wang, Muhammad Abdul Nasir Khan, Hao Zhang, Jizi Liu, Chengzhong Yu*, Lianjun Wang, Jiansheng Li*, Core-Shell Prussian Blue Analogs with Compositional Heterogeneity and Open Cages for Oxygen Evolution Reaction, Advanced Science6: **, 2019.
Xiao Lyu, Gen Li, Xiaokang Chen, Bowen Shi, Jizi Liu, Linzhou Zhuang, and Yi Jia*, Atomic Cobalt on Defective Bimodal Mesoporous Carbon toward Efficient Oxygen Reduction for Zinc-Air Batteries, Small Methods**, 2019.
Hui Xia^#, Xiaohui Zhu^#, Jizi Liu^#, Qi Liu, Si Lan, Qinghua Zhang, Xinyu Liu, Joon, Kyo Seo, Tingting Chen, Lin Gu*, Ying Shirley Meng*, Monoclinic NaMnO_2-y-δ(OH)_2ywith new polymorph for ultrafast and ul1 trastable sodium ion storage, NATURE COMMUNICATIONS9: 5100, 2018.
Jiang Liu, Peng Wang, Meiyu Wang, Rui Xu, Jian Zhang, Jizi Liu, Di Li, Ningning Liang, Youwei Du, Guang Chen, Guodong Tang,?Achieving high thermoelectric performance with Pb and Zn codoped polycrystalline SnSe via phase separation and nanostructuring strategies, Nano Energy53: 683-689, 2018.
Guodong Tang, Jiang Liu, Jian Zhang, Di Li, Rui Xu, Wenqi Lu, Jizi Liu*, Yongsheng Zhang and Zhenzhen Feng, Realizing High Thermoelectric Performance below Phase Transition Temperature in Polycrystalline SnSe via Lattice Anharmonicity Strengthening and Strain Engineering, ACS Appl. Mater. Interfaces10 (36): 30558-30565, 2018.
Wei Wei, Cheng Chang, Teng Yang, Jizi Liu, Huaichao Tang, Jian Zhang, Yusheng Li, Feng Xu, Zhidong Zhang, Jing-Feng Li, and Guodong Tang*, Achieving High Thermoelectric Figure of Merit in Polycrystalline SnSe via Introducing Sn Vacancies, J. Am. Chem. Soc.140: 499-505, 2018.
Chao Liu^#, Jizi Liu^#, Jing Wang, Jiansheng Li*, Rui Luo, Jinyou Shen, Xiuyun Sun, Weiqing Han, Lianjun Wang, Electrospun mulberry-like hierarchical carbon fiber web for high-performance supercapacitors, Journal of Colloid and Interface Science512: 713-721, 2018.
Jizi Liu, Qiuying Xia, Yadong Wang, Hui Xia, Mesoporous ZnCo2O4-ZnO hybrid nanotube arrays as advanced anodes for lithium-ion batteries, Materials Letters193: 220-223, 2017.
Chao Liu, Jing Wang, Jiansheng Li, Jizi Liu, Chaohai Wang, Xiuyun Sun, Jinyou Shen,a Weiqing Hana and Lianjun Wang, Electrospun ZIF-based hierarchical carbon fiber as an efficient electrocatalyst for the oxygen reduction reaction, J. Mater. Chem. A5: 1211, 2017.
Jianping Ji^#, Xiufeng Song^#, Jizi Liu^#, Zhong Yan^#, Chengxue Huo^#, Shengli Zhang^#, Meng Su, Lei Liao, Wenhui Wang, Zhenhua Ni, Yufeng Hao & Haibo Zeng, Two-dimensional antimonene single crystals grown by van der Waals epitaxy, NATURE COMMUNICATIONS7: 13352, 2016.
Pei Yuan, Junliang Sun, Hongyi Xu, Liang Zhou, Jizi Liu, DaLiang Zhang, Yunhua Wang, Kevin S. Jack, John Drennan, Dongyuan Zhao, Gaoqing Lu, Xiaodong Zou*, Jin Zou* and ChengzhongYu*, Extensive Inspection of an Unconventional Mesoporous SilicaMaterial at All Length-Scales, Chemistry of Materials23: 229-238, 2011.
Zhi-Gang Chen, Lina Cheng, Hong-Yi Xu, Ji-Zi Liu, Jin Zou*, Takashi Sekiguchi, Gao Qing (Max) Lu* and Hui-Ming Cheng*, ZnS Branched Architectures as Optoelectronic Devices and Field Emitters. Advanced Materials 22(21): 2376-2380, 2010.
Lu-Tang Fu, Zhi-Gang Chen, Da-Wei Wang, Lina Cheng, Hong-Yi Xu, Ji-Zi Liu,Hong-Tao Cong*, Gao Qing (Max) Lu and Jin Zou*, Wurtzite P-Doped GaN Triangular Microtubes as Field Emitters, Journal of Physical Chemistry C 114: 9627-9633, 2010.
陈江华，刘吉梓，石慧, 多片层方法计算高阶劳厄衍射效应的收敛性研究, 电子显微学报 26, 462-472, 2007.
授权专利：
刘吉梓，沙刚，一种用于观察三维原子探针试样的透射电镜样品台，中国，ZL8.4，2017/11/14
陈江华，刘吉梓，杨修波，谢娟，秦芳，一种高强、轻质、耐蚀、可焊的Al-Zn-Mg合金及制备方法，中国，CN4.4，2013/12/25
陈江华，刘春辉，刘吉梓，伍翠兰，提高6xxx系铝合金薄板加工成形与烘烤硬化性能的热处理方法，中国，CN1.5，2009/9/30
陈江华，刘春辉，刘吉梓，伍翠兰，提高6xxx系铝合金薄板加工成形与烘烤硬化性能的热处理方法（分案），中国，CN2.7，2010/9/15
肖平安，胡业奇，刘吉梓，刘素红，戴坤良，陈振华，一种粉末注射成形用梯度负压热脱脂技术，2007.6，中国，CN9.8，2007/6/6





指导学生情况


其他信息


获奖、荣誉称号






新闻列表