姓 名 靳慎豹 性 别 男
出生年月 1984年12月 籍贯 河北邢台市
民 族 汉族 政治面貌 群众
最后学历 博士研究生毕业 最后学位 工学博士
技术职称 讲师 导师类别 硕士生导师
导师类型 校内 兼职导师 否
行政职务 Email jinshenbao@njust.edu.cn
工作单位 材料科学与工程学院 邮政编码 210094
通讯地址 南京市玄武区孝陵卫街200号340栋305室
单位电话
个人主页
指导学科
学科专业(主) 0805|材料科学与工程 招生类别 硕士 所在学院 材料科学与工程学院格莱特研究院
研究方向 材料精细微观组织结构(三维原子探针),包括纳米金属;高温合金;陶瓷材料等。
工作经历
2015/12-至今,南京理工大学,材料科学与工程学院,讲师
2013/08-2015/11,挪威科技大学,材料科学与工程学院,博士后
教育经历
2008/9–2012/6,吉林大学,材料加工,博士
2006/9–2008/7,吉林大学,材料加工,硕士
2002/9–2006/7,吉林大学,材料成型及控制工程,学士
科研项目
1、国家自然科学基金青年项目,**,燃烧合成TMCx陶瓷晶体的结构演化及其对界面结构、生长行为的影响,2017.1-2019.12,在研,主持。
发表论文
2019年度:
S.B. Jin, H.K. Su, Gang Sha, Atom Probe Tomography Analysis of TiCx Powders Synthesized by SHS in Al/Fe/Cu–Ti–C Systems, Materials, 2019, 12: 4095。
X.H. Guo, Y.D. Zhang, S.B. Jin*, R. Hu, Z.W. Liu, R.Q. Zhang, G. Sha, Segregation and precipitation at grain boundaries of weathering steels without/with Sb addition, Materials Chemistry and Physics, 2019, 236: 121783.
J. Xue, S.B. Jin*, X.H. An, X.Z. Liao, G. Sha*, Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion, Journal of Materials Science & Technology, 2019, 35: 858-864.
Y.D. Zhang, S.B. Jin*, P.W. Trimby, X.Z. Liao, M.Y. Murashkin, R.Z. Valia, G. Sha*, Strengthening mechanisms in an ultrafine-grained AlZnMgCu alloy processed by high pressure torsion at different temperatures, Materials Science and Engineering A, 2019, 752: 223.
Y.G. Qin, S.C. Lin, S.B. Jin*, J.Z. Liu, Strengthening Al-Zn-Mg Alloys via Ultra-Fine Lamella Structures Containing a High Density of Dislocations and Clusters, Metals, 2019, 9(2):140.
H.L. Jia, S.B. Jin, Y.J. Li, Formation of S3{110} incoherent twin boundaries through geometrically necessary boundaries in an Al-8Zn alloy subjected to one pass of equal channel angular pressing, Journal of Alloys and Compounds, 2018, 762: 190-195
Y.D. Zhang, S.B. Jin, P.W. Trimby, X.Z. Liao, M.Y. Murashkin, R.Z. Valia, J.Z. Liu, J.M. Cairney, S.P. Ringer, G. Sha*, Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion, Acta Materialia, 2019, 162:19-32.
Z.W. Huang, S.B. Jin, H. Zhou, Y.S. Li*, Y. Cao*, Y.T. Zhu, Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium, International Journal of Plasticity, 2019, 112:52-67.
M.X. Guo, Y.D.Zhang, G.J. Li, S.B. Jin, G.Sha, J.S. Zhang, L.Z. Zhuang, E.J. Lavernia, Solute clustering in Al-Mg-Si-Cu-(Zn) alloys during aging, Journal of Alloys and Compounds, 2019, 774: 347.
J.H. Li, Z.H. An, F.S. Hage, H.Y. Wang, P. Xie, S.B. Jin, Q.M. Ramassec, Gang Sha, Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy, Materials Science & Engineering A, 2019, 760:366–376.
2018年度:
C.C. Du, S.B. Jin, Y. Fang, J. Li, S.Y. Hu, T.T. Yang, Y. Zhang, J.Y. Huang, G. Sha, Y.G. Wang, Z.X. Shang, X.H. Zhang, B.R. Sun, S.W. Xin, T.D. Shen, Ultrastrong nanocrystalline steel with exceptional thermal stability and radiation tolerance, Nature Communications 2018, 9(1). (共同第一作者)
F. Qian, S.B. Jin, G. Sha, Y.J. Li*, Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd, Acta Materialia, 2018, 157:114-125.
N. Zhang, S.B. Jin, G.Sha, J.K. Yu, X.C. Cai, C.C. Du, T.D.Shen, Segregation induced hardening in annealed nanocrystalline Ni-Fe alloy, Materials Science and Engineering A, 2018, 735:354-360.
H.L. Jia, S.B. Jin, Y.J. Li, Formation of Σ3{110} incoherent twin boundaries through geometrically necessary boundaries in an Al-8Zn alloy subjected to one pass of equal channel angular pressing, Journal of Alloys and Compounds, 2018, 762: 190-195.
2017年度以前:
X.Z. Hu, S.B. Jin, H. Zhou, Z. Yin, J. Yang, Y.L. Gong, Y.T. Zhu, G. Sha, X.K. Zhu, Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy, Metallurgical and Materials Transactions A, 2017, 48:3943–3950.
S.B. Jin, K. Marthinsen, Y.J. Li*, Formation of twin boundaries in titanium by kinking mechanism through accumulative dislocation slip, Acta Materialia, 2016, 120:403-414.
S.B. Jin, K. Zhang, R. Bjørge, N.R. Tao, K. Marthinsen, K. Lu, Y.J. Li*, Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy, Applied Physics Letters, 2015, 54(7): 091901.01-091901.04.
S.B. Jin, N.T. Tao, K. Marthinsen, Y.J. Li*, Deformation of an Al–7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation, Materials Science and Engineering A, 2015, 628:160-167.
S.L. Shu, B. Xing, F. Qiu, S.B. Jin, Q.C. Jiang, Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles, Materials Science and Engineering A, 2013, 560: 596-600.
S.B. Jin, P. Shen, D.S. Zhou, Q.C. Jiang*, A Common Regularity of Stoichiometry-Induced Morphology Evolution of Transition Metal Carbides, Nitrides, and Diborides during Self-Propagating High-Temperature Synthesis, Crystal Growth & Design, 2012, 12(6):2814-2824.
S.B. Jin, P. Shen, Y.J. Li, D.S. Zhou, Q.C. Jiang*, Synthesis of spherical NbB2-x particles by controlling the stoichiometry, CrystEngComm, 2012,14:1925-1928.
Y.F. Yang*, S.B. Jin, Q.C. Jiang, Effect of reactant C/Ti ratio on the stoichiometry, morphology of TiCx and mechanical properties of TiCx-Ni composite,CrystEngComm, 2012,15:852-855.
D.S. Zhou, S.B. Jin, Y.J. Li, F. Qiu, F. Deng, J.G. Wang, Q.C. Jiang*,Effect of stoichiometry on the surface energies of {100} and {111} and the crystal shape of TiCx and TiNx, CrystEngComm, 2012, 15:643-649.
Y.M. Xia, Z.H. Bai, F. Qiu, S.B. Jin, Q.C. Jiang, Effects of multi-modification of rare earth oxides PrxOy and LaxOy on microstructure and tensile properties of casting Al–Cu alloy, Materials Science and Engineering A, 2012, 558: 602-606.
S.L. Shu, F. Qiu, B. Xing, S.B. Jin, Y.W. Wang, Q.C. Jiang, Study of effect of Mn addition on the mechanical properties of Ti2AlC/TiAl composites through first principles study and experimental investigation. Intermetallics, 2012, 28: 65-70.
H.L. Zhao, F.Qiu, S.B.Jin, Q.C.Jiang Compression properties and work-hardening effect of the NiAl-matrix composite with TaB2 and TaB, Intermetallics, 2012, 27: 1-5.
S.L. Shu, F. Qiu, S.J. Lü, S.B. Jin, Q.C. Jiang, Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction. Materials Science and Engineering A, 2012, 539: 344-348.
Q.Q. Xuan, S.L. Shu, F. Qiu, S.B. Jin, Q.C. Jiang, Different strain-rate dependent compressive properties and work-hardening capacities of 50 vol% TiCx/Al and TiB2/Al composites. Materials Science and Engineering A, 2012, 538: 335-339.
H.L. Zhao, F. Qiu, S.B. Jin, Q.C. Jiang, Effect of different strain rates on compression property and work-hardening behavior for the NiAl-matrix composite with 1.7 wt.% NbB2 and NbxC. Materials Science and Engineering A, 2012, 534: 22-25.
S.B. Jin, P. Shen, D.S. Zhou, Q.C. Jiang*, Self-propagating high-temperature synthesis of nano-TiCx particles with different shapes by using carbon nano-tube as C source, Nanoscale Research Letters, 2011, 6:515-521.
Q.L. Lin, P. Shen*, L.L. Yang, S.B. Jin, Q.C. Jiang, Wetting of TiC by molten Al at 1123–1323K, Acta Materialia, 2011, 59(5):1898-1911.
H.L. Zhao, F. Qiu, S.B. Jin, Q.C. Jiang*, High room-temperature plastic and work-hardening effect of the NiAl-matrix composites reinforced by particulates. Intermetallics, 2011, 19(3): 376-381.
S.L. Shu, F. Qiu, S.B. Jin, J.B. Lu, Q.C. Jiang, Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system. Materials & Design, 2011, 32(10): 5061-5065.
H.L. Zhao, F. Qiu, S.B. Jin, Q.C. Jiang, High work-hardening effect of the pure NiAl intermetallic compound fabricated by the combustion synthesis and hot pressing technique. Materials Letters, 2011, 65(17-18): 2604-2606.
S.B. Jin, P. Shen, Q.L. Lin, L. Zhan, Q.C. Jiang*, Growth Mechanism of TiCx during Self-Propagating High-Temperature Synthesis in an Al−Ti−C System, Crystal Growth & Design, 2010, 10(4):1590-1597.
S.B. Jin, P. Shen, B.L. Zou, Q.C. Jiang*, Morphology Evolution of TiCx Grains During SHS in an Al−Ti−C System, Crystal Growth & Design, 2009, 9(2):646-649.
B.L. Zou, S.B. Jin, P. Shen, Q.C. Jiang, Effect of reactant C/Ti ratio on the stoichiometry of Combustion-synthesized TiCx in Ti-C system. Journal of the Ceramic Society of Japan, 2009, 117(1364): 525-528.
L. Zhan, P. Shen, S.B. Jin, Q.C. Jiang. Combustion synthesis of Ti (C, N)–TiB2 from a Ti–C–BN system. Journal of Alloys and Compounds, 2009, 480(2): 315-320.
P. Shen, B.L. Zou, S.B. Jin, Q.C. Jiang, Reaction mechanism in self-propagating high temperature synthesis of TiC-TiB2/Al composites from an Al-Ti-B4C system. Materials Science and Engineering A, 2007, 454: 300-309.
科研创新
(1) 发明专利,CN2.3
(2) 发明专利,CN5.3
(3) 发明专利,CN7.6
教学活动
衍射分析(diffraction analysis)
现代材料检测方法
指导学生情况
指导四名硕士研究生
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
南京理工大学材料科学与工程学院导师教师师资介绍简介-靳慎豹
本站小编 Free考研考试/2021-02-17
相关话题/南京理工大学 材料科学与工程学院
南京理工大学材料科学与工程学院导师教师师资介绍简介-刘二
姓名刘二性别男出生年月1986年3月籍贯江苏东海县民族汉族政治面貌党员最后学历博士研究生最后学位技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailericliu@njust.edu.cn工作单位材料科学与工程学院邮政编码210094通讯地址南京市玄武区孝陵卫200号单位电话个人 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-李晓鹏
姓名李晓鹏性别男出生年月籍贯民族政治面貌最后学历最后学位技术职称导师类别硕士生导师导师类型校内兼职导师否行政职务Email工作单位邮政编码通讯地址单位电话个人主页指导学科学科专业(主)0805|材料科学与工程招生类别硕士所在学院材料科学与工程学院格莱特研究院研究方向 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-潘诗琰
姓名潘诗琰性别男出生年月1984年1月籍贯民族政治面貌最后学历博士研究生毕业最后学位工学博士技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailcalculate@njust.edu.cn工作单位邮政编码通讯地址单位电话个人主页https://www.researchgate.n ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-缪雪飞
姓名缪雪飞性别男出生年月1987年1月籍贯江苏如东县民族汉族政治面貌党员最后学历博士研究生最后学位工学博士技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailxuefeimiao@njust.edu.cn工作单位材料科学与工程学院邮政编码210094通讯地址南京市孝陵卫200号单 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-石晓琴
姓名石晓琴性别女出生年月1980年4月籍贯湖北赤壁市民族汉族政治面貌党员最后学历博士研究生毕业最后学位技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailsxq@njust.edu.cn工作单位材料学院邮政编码通讯地址单位电话个人主页指导学科学科专业(主)0805|材料科学与工程 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-申小平
姓名申小平性别女出生年月1963年1月籍贯江苏建湖县民族汉族政治面貌党员最后学历大学本科最后学位工学学士技术职称高级工程师导师类别硕士生导师导师类型校内兼职导师否行政职务Emailxpshen171@163.com工作单位南京理工大学工程训练中心邮政编码通讯地址385栋A511单位电话个人主页指导学 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-王磊
姓名王磊性别男出生年月1992年1月籍贯黑龙江铁力市民族汉族政治面貌党员最后学历博士研究生毕业最后学位工学博士技术职称讲师导师类别硕士生导师导师类型校内兼职导师否行政职务Emailwang1913@njust.edu.cn工作单位南京理工大学材料科学与工程学院邮政编码210094通讯地址南京市玄武区 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-宋秀峰
姓名宋秀峰性别男出生年月1983年1月籍贯莱阳民族汉族政治面貌群众最后学历博士研究生最后学位技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailxiufengsoong@njust.edu.cn工作单位材料学院邮政编码通讯地址单位电话个人主页指导学科学科专业(主)0805|材料科 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-许海鹰*
姓名许海鹰*性别男出生年月籍贯民族政治面貌最后学历最后学位技术职称导师类别硕士生导师导师类型外聘兼职导师是行政职务Email工作单位邮政编码通讯地址单位电话个人主页指导学科学科专业(主)0805|材料科学与工程招生类别硕士所在学院材料科学与工程学院格莱特研究院研究方向 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17南京理工大学材料科学与工程学院导师教师师资介绍简介-徐桂舟
姓名徐桂舟性别女出生年月1988年8月籍贯安徽省安庆市民族汉族政治面貌党员最后学历博士研究生最后学位理学博士技术职称副教授导师类别硕士生导师导师类型校内兼职导师否行政职务Emailgzxu@njust.edu.cn工作单位南京理工大学邮政编码通讯地址单位电话个人主页指导学科学科专业(主)0805|材 ...南京理工大学师资导师 本站小编 Free考研考试 2021-02-17