姓名
肖茂华
性别
男


职称
教授
系别
机械工程系

学位
博士/硕导
电话
**

E-mail
xiaomaohua@njau.edu.cn

单位地址
南京市浦口区点将台路40号
邮编
210031

研究领域
高端农机装备健康维护，智能制造技术与装备

社会兼职
中国农业机械学会青年工作委员会，副主任委员
江苏省机械工程学会机械设计与传动分会，理事
全国拖拉机标准化技术委员会，委员

承担项目
1.国家星火计划：农用大马力拖拉机关键技术集成与应用（编号：2015GA690141），主持
2.江苏省农业科技自主创新资金：基于大数据和深度学习的大功率拖拉机故障自诊断系统研发（编号：CX(19)3081），主持
3.江苏省重点研发计划：基于深度学习的高端重载齿轮传动装置大数据健康维护系统研发及应用（编号：BE**），主持
4.江苏省重点研发计划：设施茄果类蔬菜智能机械化精细生产技术与装备研发（编号：BE**），技术主持
5.江苏省工业支撑计划：高效节能大马力拖拉机液压机械无级变速箱的研发（编号：BE**），主持
6.江苏省自然科学基金：水田作业工况下拖拉机液压机械无级变速箱能耗机理研究（编号：BK**），主持
7.江苏省“六大人才高峰”项目：基于HST全液压驱动的南方水田喷杆喷雾机关键技术研究及优化（编号：2015-ZBZZ-011），主持
8.中国博士后科学基金：行星齿轮箱变工况性能退化评估与预测研究（编号：2016M601800），主持
9.苏州市现代农业项目：智能型自走式高地隙喷杆喷雾施肥一体机关键技术与应用示范---智能喷药系统与装备研发（编号：SNG201901-1），技术主持
10. 中央高校基本科研业务费专项资金资助：大功率拖拉机无级变速智能控制技术研究（编号：KYZ201760），主持
11.南京农业大学工学院优秀青年人才科技基金：大功率拖拉机HMCVT系统能耗机理研究（编号：YQ201605），主持
12.中央高校基本业务费：镍基合金在高速切削中的切削热分配研究（编号：KJ**），主持
13.江苏省“企业博士集聚计划”：宽台面高速超精密压力机设计与优化（编号：苏人才办【2012】40号），主持
14.南京农业大学人才启动基金：薄壁零件高速切削的振动分析与加工变形研究（编号：Rcqd11-07），主持
15.江苏省数字化制造技术重点实验室开放课题：硬材料高速加工延长刀具寿命关键技术（编号：HGDML-1003），主持
16.江苏省先进制造技术重点实验室开放课题：基于振动切削的细长轴高速加工特性与参数优化研究（编号：HGAMTL-1711），主持
17.国家自然科学基金：可持续供液的刀具表面混合型微结构设计方法研究（编号：**），子课题主持
18. 南京创力传动机械有限公司项目：移动作业式农作物秸秆造粒机关键技术研究，主持

学术成果
出版著作：
1.车辆地盘建模与分析，2013，北京大学出版社，第三主编.
2.汽车电子控制技术，2018年，人民交通出版社，副主编
3.汽车试验学，2019年，机械工业出版社，副主编
近期主要论文：
1. Maohua Xiao, Xiaojie Shen, Xiao Liu, et al. Study on Properties of 45 Carbon Steel Ni–P Electroless Plating Reinforced by Si3N4–Al2O3 Particle Based on Response Surface Method，Journal of Nanoscience and Nanotechnology, Vol. 20, 4761–4772, 2020 (SCI)
2.Zhenmin Sun, Maohua Xiao*,Hemei Yang, et al. Effects of the CNT Content and Plating Solution pH After Purification on the Performance of Ni–P CNT Composite Coating, Arabian Journal for Science and Engineering (2020) 45:1229–1236 (SCI)
3. Maohua Xiao, Z. Deng, Y. Ma,et al. Ratings of Rice Leaf Blast Disease Based on Image Processing and Stepwise Regression, ASABE , 2019，35(6): 1037-1043 (SCI)
4. Gongshuo Zhang, Maohua Xiao*,Zhiqing Zhang,et al. Soil-cutting simulation and parameter optimization of rotary blade’s threeaxis resistances by response surface method, Computers and Electronics in Agriculture, 164 (2019) 104902 (SCI)
5. Maohua Xiao, Z. X. HUA, Z. M. SUN, et al. The effect of Cu and Co content on Ni-P-Cu-Co electroplating by response surface method, Digest Journal of Nanomaterials and Biostructures, Vol. 14, No. 3, 2019 (SCI)
6. Maohua Xiao, Yuewen Wang, Fan Zou, et al. Dynamic Simulation Research of Hydro Mechanical CVT, IETE Journal of Research, DOI: 10.1080/**.2019.** (SCI)
7. Maohua Xiao,Jingwen Chen, Jingjing Kang,et al. Effect of heat treatment process on mechanical properties and microstructure of FeAlCoCrNiTi0.5 alloy, AIP ADVANCES8, 095322 (2018) (SCI)
8. Wanqing Yao, Maohua Xiao*,Dan Wu,et al. Design and analysis of multi-functional variable speed weeding machine, International Agricultural Engineering Journal，Vol. 27, No. 3 (EI)
9. Maohua Xiao, Cunyi Zhang, Kai Wen,et al. Bearing fault feature extraction method based on complete ensemble empirical mode decomposition with adaptive noise, Journal Of Vibroengeering. November 2018(EI)
10.Maohua Xiao, You Ma, Zhixiang Feng,et al. Rice blast recognition based on principal component analysis and neural network, Computers and Electronics in Agriculture ,154 (2018) 482–490 (SCI)
11.Maohua Xiao*, Yuewen Wang, Yuan Tian,et al. Meshing force research of planetary gear for hydro-mechanical continuously variable transmission, International Agricultural Engineering Journal Vol. 27, No. 2(EI)
12.Maohua Xiao , Kai Wen,Cunyi Zhang,et al. Research on Fault Feature Extraction Method of Rolling Bearing Based on NMD and Wavelet Threshold Denoising, Shock and Vibration , 2018 (SCI)
13.Maohua Xiao*, Jing Zhao, Yuewen Wang,et al. Fuel economy of multiple conditions self-adaptive tractors with hydro-mechanical CVT,Int J Agric & Biol Eng，Vol. 11 No.3 (SCI)
14.Fuxing Li,Maohua Xiao*,Hao Liu,et al. Driving Torque Model and Accuracy Test of Multilink High-Speed Punch, Hindawi Mathematical Problems in Engineering , 2018 (SCI)
15.Maohua Xiao ,Guosheng Geng , Guohong Li ,et al. Analysis on dynamic precision reliability of high-speed precision press based on Monte Carlo method, Nonlinear Dynamics (2017) 90:2979–2988 (SCI)
16.Weichao Zhang,Maohua Xiao*, Fan Zou,et al. Research on tool wear prediction based on Archard agglomeration scavenging theory, Advances in Mechanical Engineering, 2017, Vol. 9(10) (SCI)

奖励荣誉
1、2019年江苏省高等教育科研成果二等奖；
2、2017年江苏省青年科技人才托举工程
3、2015年江苏省“六大人才高峰”高层次人才；
4、全架式大功率拖拉机关键技术及产业化，2014年江苏省科技进步奖三等奖；
5、高速智能化电线电缆挤出生产线研发及产业化，2017年江苏省科技进步奖三等奖；
6、动力换挡拖拉机智能化关键技术应用及产业化，2017年山东省科技进步奖三等奖；

Name
Maohua Xiao
Gender
Male


Title
Professor
Department
Mechanical Engineering

Degree
Doctor
Telephone
+86-**

E-mail
xiaomaohua@njau.edu.cn

Unit address
No.40 Dianjiangtai Road, Nanjing, Pukou District, Jiangsu Province
Post code
210031

Research field
Agricultural machinery equipment health maintenance, intelligent manufacturing technology and equipment

Social appointments
Deputy Chairman of Youth Working Committee of China Agricultural Machinery Association
Director, Mechanical Design and Transmission Branch of Jiangsu Mechanical Engineering Society
Member, National Tractor Standardization Technical Committee

Research projects
1. National Spark Program: Integration and application of key technologies for high-power agricultural tractors (No. 2015GA690141), chair
2. Jiangsu Province Agricultural Science and Technology Independent Innovation Fund: Research and Development of High-Power Tractor Fault Self-Diagnosis System Based on Big Data and Deep Learning (CX (19) 3081), Host
3. Jiangsu R & D plan: R & D and application of big data health maintenance system for high-end heavy-duty gear transmission based on deep learning (No. BE**), host
4. Key R & D plan of Jiangsu Province: R & D of intelligent mechanized fine production technology and equipment for facility eggplant and fruit vegetables (No. BE**), technical chair
5. Jiangsu Provincial Industrial Support Plan: R & D of High-efficiency Energy-saving High-horsepower Tractor Hydraulic Mechanical CVT (No .: BE**), Host
6. Jiangsu Provincial Natural Science Foundation: Study on Energy Consumption Mechanism of Tractor Hydro-Mechanical CVT under Paddy Field (No .: BK**), chair
7. Jiangsu Province "Six Talent Peaks" Project: Research and Optimization of Key Techniques for Southern Paddy Field Sprayer Sprayer Based on HST Full Hydraulic Drive (No .: 2015-ZBZZ-011), Host
8. China Postdoctoral Science Foundation: Evaluation and prediction of performance degradation of planetary gearbox under variable working conditions (No. 2016M601800), chair
9. Suzhou Modern Agriculture Project: Key Technology and Application Demonstration of Intelligent Self-propelled High Ground Gap Sprayer and Fertilizer All-in-One Intelligent R & D System and Equipment (No .: SNG201901-1), Technical Host
10. Funded by special funds for basic scientific research business expenses of central universities: Research on intelligent control technology for continuously variable transmission of high-power tractors (No. KYZ201760), chaired
11. Science and Technology Fund for Outstanding Young Talents, College of Engineering, Nanjing Agricultural University: Research on Energy Consumption Mechanism of High Power Tractor HMCVT System (No .: YQ201605), Host
12. Basic business fees of central universities: Research on cutting heat distribution of nickel-based alloys in high-speed cutting (No. KJ**), chair
13. Jiangsu Province “Doctoral Gathering Plan for Enterprises”: Design and Optimization of Wide Table High-speed Ultra-precision Press (No .: Su Talent Office [2012] No. 40), Host
14. Nanjing Agricultural University Talent Start-up Fund: Vibration Analysis and Machining Deformation Research of High-speed Cutting of Thin-walled Parts (No .: Rcqd11-07), Host
15. Open Project of Jiangsu Key Laboratory of Digital Manufacturing Technology: Key Technology for High-speed Processing of Hard Materials to Prolong Tool Life (No .: HGMML-1003), Host
16. Open project of Jiangsu Key Laboratory of Advanced Manufacturing Technology: Research on high-speed machining characteristics and parameter optimization of slender shafts based on vibration cutting (No .: HGAMTL-1711), chair
17. National Natural Science Foundation of China: Study on Hybrid Microstructure Design Method of Tool Surface for Sustainable Liquid Supply (No. **), chaired by sub-project
18. Nanjing Chuangli Transmission Machinery Co., Ltd. Project: Research on key technologies of mobile crop straw granulator, chair

Academic achievements
Publications:
1. Vehicle Site Modeling and Analysis, 2013, Peking University Press, Third Editor.
2. Automotive Electronic Control Technology, 2018, People's Communications Press, Deputy Chief Editor
3. Automotive Experiment, 2019, Deputy Editor-in-Chief, Machinery Industry Press
Recent major papers:
1. Maohua Xiao, Xiaojie Shen, Xiao Liu, et al. Study on Properties of 45 Carbon Steel Ni–P Electroless Plating Reinforced by Si3N4–Al2O3 Particle Based on Response Surface Method，Journal of Nanoscience and Nanotechnology, Vol. 20, 4761–4772, 2020 (SCI)
2.Zhenmin Sun, Maohua Xiao*,Hemei Yang, et al. Effects of the CNT Content and Plating Solution pH After Purification on the Performance of Ni–P CNT Composite Coating, Arabian Journal for Science and Engineering (2020) 45:1229–1236 (SCI)
3. Maohua Xiao, Z. Deng, Y. Ma,et al. Ratings of Rice Leaf Blast Disease Based on Image Processing and Stepwise Regression, ASABE , 2019，35(6): 1037-1043 (SCI)
4. Gongshuo Zhang, Maohua Xiao*,Zhiqing Zhang,et al. Soil-cutting simulation and parameter optimization of rotary blade’s threeaxis resistances by response surface method, Computers and Electronics in Agriculture, 164 (2019) 104902 (SCI)
5. Maohua Xiao, Z. X. HUA, Z. M. SUN, et al. The effect of Cu and Co content on Ni-P-Cu-Co electroplating by response surface method, Digest Journal of Nanomaterials and Biostructures, Vol. 14, No. 3, 2019 (SCI)
6. Maohua Xiao, Yuewen Wang, Fan Zou, et al. Dynamic Simulation Research of Hydro Mechanical CVT, IETE Journal of Research, DOI: 10.1080/**.2019.** (SCI)
7. Maohua Xiao,Jingwen Chen, Jingjing Kang,et al. Effect of heat treatment process on mechanical properties and microstructure of FeAlCoCrNiTi0.5 alloy, AIP ADVANCES8, 095322 (2018) (SCI)
8. Wanqing Yao, Maohua Xiao*,Dan Wu,et al. Design and analysis of multi-functional variable speed weeding machine, International Agricultural Engineering Journal，Vol. 27, No. 3 (EI)
9. Maohua Xiao, Cunyi Zhang, Kai Wen,et al. Bearing fault feature extraction method based on complete ensemble empirical mode decomposition with adaptive noise, Journal Of Vibroengeering. November 2018(EI)
10.Maohua Xiao, You Ma, Zhixiang Feng,et al. Rice blast recognition based on principal component analysis and neural network, Computers and Electronics in Agriculture ,154 (2018) 482–490 (SCI)
11.Maohua Xiao*, Yuewen Wang, Yuan Tian,et al. Meshing force research of planetary gear for hydro-mechanical continuously variable transmission, International Agricultural Engineering Journal Vol. 27, No. 2(EI)
12.Maohua Xiao , Kai Wen,Cunyi Zhang,et al. Research on Fault Feature Extraction Method of Rolling Bearing Based on NMD and Wavelet Threshold Denoising, Shock and Vibration , 2018 (SCI)
13.Maohua Xiao*, Jing Zhao, Yuewen Wang,et al. Fuel economy of multiple conditions self-adaptive tractors with hydro-mechanical CVT,Int J Agric & Biol Eng，Vol. 11 No.3 (SCI)
14.Fuxing Li,Maohua Xiao*,Hao Liu,et al. Driving Torque Model and Accuracy Test of Multilink High-Speed Punch, Hindawi Mathematical Problems in Engineering , 2018 (SCI)
15.Maohua Xiao ,Guosheng Geng , Guohong Li ,et al. Analysis on dynamic precision reliability of high-speed precision press based on Monte Carlo method, Nonlinear Dynamics (2017) 90:2979–2988 (SCI)
16.Weichao Zhang,Maohua Xiao*, Fan Zou,et al. Research on tool wear prediction based on Archard agglomeration scavenging theory, Advances in Mechanical Engineering, 2017, Vol. 9(10) (SCI)

Reward & Honor
1. The Second Prize of Jiangsu Province Higher Education Research Achievements in 2019;
2.2017 Jiangsu Province Young Science and Technology Talent Support Project
3. High-level talents in the "Six Talents Peak" of Jiangsu Province in 2015;
4. Key technologies and industrialization of full-frame high-power tractors, the third prize of Jiangsu Province Science and Technology Progress Award in 2014;
5. R & D and industrialization of high-speed intelligent wire and cable extrusion production line, the third prize of Jiangsu Province Science and Technology Progress Award in 2017;
6. Intelligent key technology application and industrialization of power-shifting tractors, 2017 Shandong Science and Technology Progress Award Third Prize;