赵勇B

副教授

焊接及电子封装系

材料科学与工程学院


个人邮箱：
yongzhao418@just.edu.cn

办公地点：


通讯地址：
江苏省镇江市梦溪路2号

邮政编码：
212003

传真：







您是第10 位访问者










个人简介
赵勇，博士，教授，毕业于上海交通大学，国际焊接工程师，江苏省“双创”博士，镇江市十佳教师，江苏科技大学教学名师，江苏科技大学优秀教师。近五年发表论文三十余篇，其中SCI收录30篇，作为项目负责人科研到款650余万元。主持并完成江苏省及校教改项目各1项，负责江苏省在线开放课程1门，指导本科毕业设计省优4次，江苏省微课比赛二等奖，江苏科技大学讲课比赛二等奖2次，江苏科技大学微课比赛一等奖。





研究方向
1）激光焊接；
2）搅拌摩擦焊；
3）材料焊接性



教育经历
博士毕业于上海交通大学，
师从吴毅雄教授





课程教学








科研项目

专利成果

科研团队

获奖动态












教学随笔

论文著作

论文题目
期刊
年，卷，期，页码
作者
档次

1
Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding
Materials and Design
Mater. Des.
56 (2014) 725–730
赵勇*，王清曌，
陈华斌，严铿
SCI 二区IF=3.171
ESI期刊

2
Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding
Materials and Design
Mater. Des.
57 (2014) 146–155
赵勇*，周礼龙，王清曌，严铿，邹家生
SCI 二区IF=3.171
ESI期刊

3
Microstructure and Mechanical Properties of Friction Stir-
Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium Alloy
Journal of Materials Engineering and Performance
J. Mater. Eng. Perform.
(2014)23:4136–4142
赵勇，王清曌，何旭丹，黄坚*，严铿，董洁
SCI 四区IF=0.981
ESI期刊K

4
Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys
Materials and Design
Mater. Des.
65 (2015) 675–681
赵勇，陆正萍，严铿*，黄林召

SCI 二区IF=3.171
ESI期刊

5
Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy
International journal of advanced manufacturing technology
Int.J.Adv.Manuf. Technol.
(2015)78:1437-1443
赵勇，黄小鲁，李启明，黄坚（通讯作者），严铿
SCI 四区IF=1.458
ESI期刊

6
Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding
Materials and Design
Mater. Des.
68 (2015) 97–103
王清曌，赵勇*（通讯作者），严铿，芦笙

SCI 二区IF=3.171 ESI期刊

7
50 mm 转子钢超窄间隙激光填丝焊接头组织与性能
中国激光
2015,42(2):117-123
赵勇，王清曌，黄坚*，吴毅雄
EI收录

8
Ultra-narrow-gap multi-pass welding of 70 mm thick steel plates using a high power CO₂laser
7^thAsia Pacific IIW International Congress
8 July 2013
赵勇，黄坚，吴毅雄
国际会议

9
Influence of cooling conditions on joint properties
and microstructures of aluminum and magnesium dissimilar
alloys by friction stir welding
International journal of advanced manufacturing technology
Int.J.Adv.Manuf. Technol.
2016,83(1): 673-679
赵勇，蒋圣，杨少峰，陆正萍，严铿（通讯作者）
SCI 四区IF=1.458
ESI期刊

10
The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint
Materials and Design
Mater. Des.
88（2015）1366-1376
王清曌，赵志霞，赵勇（通讯作者），严铿，张豪

SCI 二区IF=3.171
ESI期刊

11
Effect of travel speed on the microstructure of Al-to-Mg FSW joints
Materials Science and Technology
Mater.Sci. Technol.
2016,32(10):1025-1034
赵勇，黄林召，赵志霞，严铿（通讯作者）
SCI 四区IF=1.008
ESI期刊

12
The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding-2016
Materials and Design
Mater. Des.
102 (2016) 91-99
王清曌，赵志霞，赵勇（通讯作者），严铿，刘川，张豪
SCI 二区IF=3.997
ESI期刊

13
Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding
Journal of Materials Processing Technology
J MATER PROCESS TECH
237 (2016) 208–215
赵勇，朱凯立，马秋杰，尚青，黄坚，杨东杰
SCI 三区IF=2.359
ESI期刊

13#
Improvement in Joint Strength of Spray-Deposited Al-Zn-
Mg-Cu Alloy in Underwater Friction Stir Welding by
Altered Temperature of Cooling Water
Journal of Materials Engineering and Performance
J. Mater. Eng. Perform.
(2016) 25:5486–5493
梁海梅，严铿（通讯作者），王清曌，赵勇，刘川，张豪
SCI 四区IF=0.981
ESI期刊

14
Droplet transfer and weld geometry in laser welding with filling wire
International journal of advanced manufacturing technology
Int.J.Adv.Manuf. Technol.
(2017) 90:2153–2161
赵勇，杨千里，黄坚（通讯作者），邹家生，吴毅雄
SCI 三区IF=1.568
ESI期刊

15
Microstructure and mechanical properties of the laser-welded
Mg-3Nd-0.2Zn-0.4Zr (NZ30K) magnesium alloy
Optics and Laser Technology
OPT LASER TECHNOL
93 (2017) 109–117
严铿，苏金松，赵勇（通讯作者）
SCI 三区IF=1.879
ESI期刊

16
Narrow-gap laser welding using filler wire of thick steel plates
International journal of advanced manufacturing technology
Int.J.Adv.Manuf. Technol.
2017
2017(1):1-8
赵勇，马生翀，黄坚（通讯作者），吴毅雄
SCI 三区IF=1.568
ESI期刊

17
The effect of laser surface melting on microstructure and corrosion behavior of friction stir welded aluminum alloy 2219
Optics and Laser Technology
OPT LASER TECHNOL
2017
2017,96:299-306
马生翀，赵勇（通讯作者），邹家生，严铿，刘川
SCI 三区IF=1.879
ESI期刊

18
Effects of Overlapping Distances on Steel Microstructure and Properties After Multi-track Laser Quenching
Journal of Materials Engineering and Performance
J. Mater. Eng. Perform.
December 2017,Volume 26,Issue12,pp 5973–5982
Yong Zhao,Chen Chen, Keng Yan, Jiasheng Zou, Chuan Liu
SCI 四区IF=0.981
ESI期刊

19
Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints
Journal of Materials Engineering and Performance
J. Mater. Eng. Perform.
2018（27）：1777-1783
赵志霞，梁海梅，赵勇（通讯作者），严铿
SCI 四区IF=0.981
ESI期刊

20
Effects of helium gas flow rate on arc shape, molten pool behavior and penetration in aluminum alloy DCEN TIG welding
Journal of Materials Processing Technology
J MATER PROCESS TECH
2018（255）：696-702
陈晨，魏新乾，赵勇，严铿（通讯作者），贾占君，贺宇翔
SCI 二区IF=2.359
ESI期刊

21
Microstructure and properties of Cu/Ti laser welded joints
Journal of Materials Processing Technology
J MATER PROCESS TECH
2018（257）：244-249
赵勇，王伟宇，严铿（通讯作者），刘川，邹家生
SCI 二区IF=2.359
ESI期刊

22
Effect of shielding gas on the metal transfer and weld morphology in pulsed current MAG welding of carbon steel
Journal of Materials Processing Technology

2018（262）：382-391
赵勇，侍孝建，严铿（通讯作者），王国强，贾占君，贺宇翔
SCI 二区IF=2.359
ESI期刊

23
Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding
Journal of Materials Engineering and Performance
J. Mater. Eng. Perform.
2018（27）:5803–5814
严铿（通讯作者），王天宇，梁海梅，赵勇
SCI 四区IF=0.981
ESI期刊

24
Microstructure and Mechanical Properties of a 10CrNi3MoV Thick Plate Welded Joint Using Narrow Gap Laser Welding with Filler Wire
Lasers in Engineering
Lasers in Eng.
2018（41）：57-72
赵勇，苏峰，黄坚（通讯作者），邹家生，吴毅雄
SCI 四区IF=0.153


25
Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy
Journal of Manufacturing Processes
2019（46）：304-316
马生翀，赵勇（通讯作者），濮继宏，赵志霞，刘川，严铿
SCI 三区IF=3.462

26
















版权所有 ? 江苏科技大学