王标兵
工学博士
教授/硕士生导师

biaobing@cczu.edu.cn

学习工作经历
· 2013/03-2013/02 四川大学，高访，合作导师：傅强教授
· 2011/02-至今， 常州大学，材料科学与工程学院高分子系系主任，教授
· 2009/02-2011/01 中北大学，材料科学与工程学院，教授/博导
· 2006/10-2009/01 Kansas State University，博士后，合作导师：Prof. Xiuzhi Sun
· 2004/04-2006/10 中北大学材料科学与工程学院，副教授
· 2002/03-2004/03 复旦大学高分子系，博士后，合作导师：丁建东教授
· 1998/09-2002/02 东华大学材料学院，博士，指导教师：顾利霞教授
· 1994/09-1997/05 中北大学化学工程系，工学硕士，指导教师：胡国胜教授
· 1997/07-1997/11 春兰基团研究院，工程师
· 1990/09-1994/07，中北大学化学工程系，工学学士

主要研究方向
1） 高性能和功能化高分子材料
2） 树脂基纳米复合材料
3） 阻燃高分子材料

主要学术成果
Ø 代表性论文
1. Biaobing Wang, Xin Zhao, Liuyang Wang, Isothermal crystallization and melting behaviors of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification, Polymer-Plastics Technology and Engineering， 52（2013）718-726
2. Ding Yuan, Biaobing Wang, Liuyang Wang , Yupeng Wang, Zuowan Zhou, ^*, David Hui, Unusual toughening effect of graphene oxide on the graphene oxide/nylon 11 composites prepared by in situ melt polycondensation, Composites Part B, Accepted. Coresponding Author, (SCI)
3. Yaping Ge, Ding Yuan, Zhonglin Luo, Biaobing Wang, Synthesis and characterization of poly(ester amide) from renewable resources through melt polycondensation, eXPRESS Polymer Journal, Accepted
4. Yunsheng Zhang, Biaobing Wang, Guosheng Hu, Isothermal crystallization kinetics and melting behavior of polyamide 11/silica nanocomposites prepared by in situ melt polymerization, J. Appl. Polym. Sci.，123（2012）273-279，Coresponding Author, (SCI)
5. Shan Lin, Weinan Guo, Chunyin Chen, Jianli Ma, Biaobing Wang, Mechanical properties and morphology of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification，Mater. Design, 36（2012）604-608，Coresponding Author, (SCI)
6. Biaobing Wang, Yang Yang, Weinan Guo, Effect of EVOH on the Morphology, Mechanical and Barrier Properties of PA6/POE-g-MAH/EVOH ternary blends, Mater. Design.40(2012)185-189, Coresponding Author, (SCI)
7. 原位聚合尼龙11/石墨烯氧化物纳米复合材料的等温结晶和熔融行为的研究，高分子材料科学与工程，2012，28（9）100-104 (EI)
8. Yunsheng Zhang, Guosheng Hu, Biaobing Wang, characterization of nylon 6/11/montmorillonite nanocomposites prepared by in situ copolymerization, e-polymers, 2011, no. 048 ISSN: 0378-3782
9. Biaobing Wang, Wei Wang, Guosheng Hu, Haiping Wang, Isothermal Crystallization kinetics and melting behavior of in-situ compatibilized nylon 6/Polyethylene-octene blends, J. Polym. Research, 17 (2010):429–437 (SCI)
10. Yingchun Li, Guosheng Hu, Zhengya Ding, Biaobing Wang, Correlation between morphology development and barrier property, non-isothermal crystallization behavior of nylon 11/EVOH/DCP composites， Journal of Applied Polymer Science, 118(2010): 2126-2133, Coresponding Author, (SCI)
11. Biaobing Wang, Yanyun Guo, Guosheng Hu, on the design of biodegradable hydrogels bothe temperaturesensitive and pH sensitive, Materials Science-Poland, 28(2010):207-215 (SCI)
12. Biaobing Wang, Lixia Hao, Wei Wang, Guosheng Hu, One-step compatibilization of polyamide 6/ poly (ethylene-1-octene) blends with maleic anhydride and peroxide , Journal of Polymer Research, 17(2010): 821-826 Coresponding Author, (SCI)
13. Biaobing Wang, Xiuzhi Susan Sun, Poly(lactic acid)/multi-hydroxyl magnesium oxide nanocomposites prepared by melt compounding, J. Biobased Materials and Bioenergy 3(2009):130-138 (SCI)
14. Guosheng Hu, Yalin Ma, Biaobing Wang, Mechanical properties and morphology of Nylon 11/ tetrapod-shape zinc oxide whisker composite, Materials Science and Engineering A, 504(2009): 8-12 Coresponding Author, (SCI)
15. Guosheng hu, Zhengya Ding, Biaobing Wang, Yingchun Li, Crystalline morphology and melting behavior of nylon11/ethylene-vinyl alcohol/dicumyl peroxide composites, Journal of Polymer Research, 16（2009）263 Coresponding Author, (SCI)
16. Biaobing Wang, Zhengya Ding, Guosheng Hu, Melting behavior and isothermal crystallization kinetics of nylon 11/EVOH/dicumyl peroxide blends, Polymer Engineering and Science, 48(2008): 2354-2361，(SCI)
17. Biao-bing Wang, Li-xia Wei, Guo-sheng Hu, Synergetic toughness and morphology of poly(propylene)/nylon 11/ maleated ethylene-propylene diene copolymer blends, Journal of Applied Polymer Science, 110(2008):1344-1350 (SCI)
18. Xiang-feng Wu, Guo-sheng Hu, Biao-bing Wang, Yun-feng Yang, Synthesis and characterization of superfine magnesium hydroxide with monodispersity, Journal of Crystal Growth, 310(2008):457-461 Coresponding Author, (SCI)
19. Biaobing Wang, Guosheng Hu, Lixia Wei, Melting behavior, nonisothermal crystallization kinetics and morphology of PP/nylon 11/EPDM-g-MAH blends, Journal of Applied Polymer Science, 107(2008):3013-3022 ，(SCI)
20. Zhengya Ding, Guo-sheng Hu, Biao-bing Wang, Effect of in situ crosslinking on mechanical properties and rheology of nylon 11 / EVOH/DCP composites, Journal of Polymer Research, 14(2007)511-517, Coresponding Author, (SCI)
21. Ya-lin Ma, Guo-sheng Hu, Xin-lin Ren, Biao-bing Wang, Non-isothermal crystallization kinetics and melting behaviors of nylon 11/tetrapod-shaped ZnO whisker (T-ZnOw) composites, Materials Science and Engineering A 460–461 (2007) 611–618, Coresponding Author, (SCI)
22. Guo-sheng Hu, Biao-bing Wang，Feng-zhen Gao ，Investigation on the rheological behavior of nylon 6/11, Materials Science and Engineering A 426 (2006): 263-265 Coresponding Author（SCI）
23. Biao-bing Wang, Guo-sheng Hu, Xin Zhao, Feng-zhen Gao，Preparation and characterization of nylon 6 11 copolymer，Materials Letters, 21-22(2006): 2715-2717 (SCI)
24. Biaobing WANG, Wen ZHU, Ying ZHANG, Zigang YANG, Jiandong DING，Synthesis of a chemically-crosslinked hydrogel film and in vitro encapsulation of model protein drugs，Reactive and Functional Polymers, 66（2006:509-518 （SCI）
25. Ying Zhang, Wen Zhu, Biaobing Wang, Lin Yu, Jiandong Ding, Postfabrication encapsulation of model protein drugs in a negatively thermosensitive hydrogle, Journal of Pharmaceutical Sciences 94(2005):1676-1684 (SCI)
26. Ying Zhang, Wen Zhu, Biaobing Wang, Jiandong Ding, A novel microgel and associated post-fabrication encapsulation technique of proteins, Journal of Controlled Release 105(2005):260-268 (SCI)
27. Wen Zhu, Biaobing Wang, Ying Zhang, Jiandong Ding， Preparation of a thermosensitive and biodegradable microgel via polymerization of macromonomers based on diacrylated Pluronic/oligoester copolymers ，European Polymer Journal，41（2005: 2161-2170 (SCI)
28. Guosheng HU, Biaobing WANG, Compatibility of reactively compatibilized polyamide 11 (nylon 11)/polyethylene (PE) Alloys, Polymer International, 54(2005):316－319 (SCI)
29. Guosheng HU, Biaobing WANG, Effect of EPDM-MAH compatibilizer on the mechanical properties and morphology of nylon 11/PE blends, Materials Letters, 58(2004):3457-3460 (SCI)
30. Wang Biaobing，Zhou Zuowan, Gu Lixia, Influence of tetrapod-shaped zinc oxide whisker on Poly（vinylidene fluoride）based composite gel polymer electrolyte，Materials Research Bulletin 38(2003):1449-1455
31. Biaobing Wang, Lixia Gu, Influence of nanometeric CuO on Poly（vinylidene fluoride）based composite gel polymer electrolyte，Materials Letters, 57(2002) :361-363 （SCI）

Ø 发明专利
1. Jiandong DING, Wen ZHU, Biaobing WANG, Ying ZHANG,A thermosensitive and biodegradable microgel and method for the preparation thereof, US patent, 申请号：10/762，029 公开号：US2－A1 公开日Aug. 12, 2004
2. 丁建东，王标兵，张颖，朱文，温敏微粒的变温悬浮反应制备方法，中国发明专利，1.4， 已授权
3. 胡国胜，王标兵，高凤珍，张敬婷，马忠平，嵌段共聚酰胺及其制备方法，中国发明专利，申请号：2.X， 已授权
4. 胡国胜，王标兵，丁正亚，李迎春，张静婷，尼龙/乙烯-乙烯醇共聚物共混型积层阻隔材料及其制备方法，中国发明专利，申请号：8.8，公开号：CN**
5. 王标兵，张淑娴，一种含磷苯并噁嗪的制备方法，中国发明专利，申请号：3.9
6. 王标兵，一种含氮磷阻燃剂的制备方法，中国发明专利，申请号：3.5
7. 王标兵，李庆蛟，一种杂化阻燃剂及其制备方法，中国发明专利，申请号：5.7
8. 王标兵，王玉龙，一种生产五溴苄基溴的方法，中国发明专利，申请号：9.1
9. 王标兵，李庆蛟，一种磷溴阻燃剂及其制备方法，中国发明专利，申请号：8.4
10. 王标兵，李志超，一种亚麻油基阻燃聚氨酯弹性体的制备方法，中国发明专利，申请号：6.0
11. 王标兵，李志超，一种蓖麻油基阻燃聚氨酯弹性体的制备方法，中国发明专利，申请号：4.0
12. 王标兵，李志超，一种桐油基阻燃聚氨酯弹性体的制备方法，中国发明专利，申请号：4.0
13. 王标兵，王玉龙，一种阻燃PET材料及其制备方法，中国发明专利，申请号：3.4
14. 王标兵，李志超，一种无卤黑料阻燃聚苯乙烯复合材料及其制备方法，中国发明专利，申请号：39950

Ø 主持项目
1． 新型微电子封装石墨烯导电胶关键技术的研发，江苏省产学研联合创新资金--前瞻性联合研究，项 目编号 BY**， 2012 /07 -2014/0 6
2． 江苏省高校青蓝工程中青年学术带头人资助项目
3． 微乳液法纳米白炭黑的制备关键技术及其表面改性和应用研究，山西省归国留学人员基金， 2010/01-2011/12
4． 微乳液法纳米白碳黑的制备及其原位增强尼龙11的关键技术，山西省科技攻关项目，项目编号， 2010/01-2012/12
5． 基于可再生植物资源的聚氨酯高分子材料的合成及其改性聚乳酸的关键技术研究，山西省人事厅人才引智项目，2009/07-2011/07
6． 具有侧羧基结构的温敏性可生物降解高分子药物缓释载体的研究，山西省青年科技研究基金，项目编号，2006/1-2008/12
7． 原位插层聚合法制备嵌段共聚尼龙611/蒙脱土纳米复合材料及性能与结构表征，东华大学纤维材料改性国家重点实验室开放课题，项目编号0507，2005/12-2007/12
8． 嵌段共聚尼龙6/11工程塑料开发及其应用，山西省科技攻关项目，项目编号052032， 2005/01-2006/12