姓名
雷冬
性别
男


民族
汉
籍贯
江西樟树

出生年月
1978．1
政治面貌
党员

最高学历
研究生
最高学位
博士

现任职务
副院长
技术职称
教授、博导

通讯地址
江苏省南京市江宁区佛城西路8号

电话
**
Email
leidong@hhu.edu.cn

个人简介：
学习和工作经历：
1996-2006：中国科学技术大学力学与机械工程系本科-硕士-博士
2007-2008：中国科学技术大学工程科学学院博士后
2009-： 河海大学力学与材料学院讲师、副教授、教授（博导）
2013-2014：美国加州大学河滨分校工程学院访问****
主要研究方向：
混凝土材料细观力学行为和破坏机理；
水利工程、土木工程结构的破坏测试与分析；
实验固体力学；
现代工程力学检测新技术和新产品。
业绩成果：
国家级科研项目：
1、2017-2020 国家自然科学基金面上项目《基于SEM和数字图像相关技术的混凝土界面过渡区细观力学行为研究》项目负责人
2、2018-2021 国家自然科学基金重点项目《深埋内压隧洞运行期工作机制与安全诊断》（参与）
3、2012-2016 国家自然科学基金重点项目《灾变条件下高混凝土坝失效破坏的关键力学问题》子题负责人
4、2013-2016 国家十二五科技支撑课题《流域水电开发安全保障技术研究》（参与）
5、2011-2013 国家自然科学基金青年项目《基于DIC技术的水工混凝土细观破坏机理研究》项目负责人
6、2010-2011 国家973项目《混凝土坝-地基耦合系统破坏-失效机理》子题负责人
【其他科研项目近30项】
学术著作：
雷冬朱飞鹏白鹏翔。《基于数学图像相关的材料和结构变形及破坏力学测试分析》。河海大学出版社，2016.11 （学术专著）
SCI-indexed Publication List

2020：
[1].Pei Zhang, Dong Lei*, Qingwen Ren, Jintao He, Hongzhou Shen, Zhihui Yang. Experimental and numerical investigation of debonding process of the FRP plate-concrete interface. Construction and Building Materials, 235 (2020):117457. (IF:4.046,中信所SCI二区)
[2].Wenkang Du, Dong Lei*, Pengxiang Bai, Feipeng Zhu, Zhentian Huang. Dynamic measurement of stay-cable force using digital image techniques. Measurement, 151 (2020):107211. (IF:2.791,中信所SCI二区)
[3]. Wenxiang Xu, Peng Lan, Yaqing Jiang, Dong Lei*, Haixia Yang. Insights into excluded volume and percolation of soft interphase and conductivity of carbon fibrous composites with
core-shell networks. Carbon, 161(2020):392-402. (IF:7.466,中信所SCI一区)
[4] Pengxiang Bai, Yongmin Xu, Feipeng Zhu, Dong Lei*. A novel method to compensate systematic errors due to undermatched shape functions in digital image correlation. Optics and Lasers in Engineering, 126 (2020):105907. (IF:4.059,中信所SCI二区)
[5] Qinpeng Shi, Rui Xiao, Huxiao Yang, Dong Lei.Effects of physical aging on thermomechanical behaviors of poly(ethylene terephthalate)-glycol (PETG), Polymer-Plastics Technology and Materials, 2020,59(8):835-846. (SCI)
[6].Feipeng Zhu, Pengxiang Bai, Dong Lei. Measurement of tensile mechanical properties of fiber reinforced plastic rebars by 3D digital image correlation. Materials Testing 62 (2020):422-428. (SCI)
2019：
[1].Binna Zhao,Dong Lei*, Jianjun Fu, Liqun Yang, Wenxiang Xu. Experimental study on micro-damage identification in reinforced concrete beam with wavelet packet and DIC method. Construction and Building Materials, 2019, 210:338-346.(IF:4.046,中信所SCI二区)
[2]. Ninghan Tang,Dong Lei*,Dianwu Huang, Rui Xiao.Mechanical performance of polystyrene foam (EPS): xperimental andnumerical analysis.Polymer Testing 73 (2019) 359–365.(IF:2.943,中信所SCI二区)
[3].Zhentian Huang,Dong Lei*,Dianwu Huang, Ji Lin, Zi Han. Boundary moving least square method for 2D elasticity problems. Engineering Analysis with Boundary Elements 106 (2019) 505–512.(IF:2.243,中信所SCI三区)
[4]. Zhentian Huang,Dong Lei*, YuanWang.Modified Moving Least Square Collocation Method forSolving Wave Equations.Advances in Applied Mathematics and Mechanics,2019,11(2):518-534.（SCI）
[5].Huxiao Yang, Rui Xiao, Zhou Yang, Dong Lei. Experimental characterization and finite element modeling the deformation behavior of rubbers with geometry defects. Polymer Testing 80 (2019) 106111. (IF:2.943, 中信所SCI二区)
[6].Feipeng Zhu, Runzhi Lu, Pengxiang Bai,Dong Lei.A novel in situ calibration of object distance of an imaging lens based on optical refraction and two-dimensional DIC.OPTICS AND LASERS IN ENGINEERING, 2019, 120:110-117.(IF:4.059,中信所SCI二区)
[7]. Zhentian Huang,Dong Lei*, Zi Han, Pei Zhang.Boundary Moving Least Square method for numerical evaluation oftwo-dimensional elastic membrane and plate dynamics problems.Engineering Analysis with Boundary Elements 108 (2019) 41–48.(IF:2.243,中信所SCI三区)
2018：
[1].Dong Lei, Jinfeng Huang, Wenxiang Xu, Wenchao Wang, Pei Zhang. Deformation analysis of shear band in granular materials via a robust plane shear test and numerical simulation.Powder Technology,Volume 323, 2018, Pages 385-392. (IF:3.413 中信所SCI二区)
[2].Dong Lei, Yingjie Liang, Rui Xiao. A fractional model with parallel fractional Maxwell elements for amorphous thermoplastics. Physica A 490 (2018) 465–475 (IF:2.5,中信所SCI三区)
[3].Pei Zhang, Qingwen Ren,Dong Lei*. Hysteretic model for concrete under cyclic tension and tension-compression reversals. Engineering Structures, Volume 163, 2018, pp:388-395.(IF:3.084,中信所SCI二区)
[4].Wenxiang Xu, Mingkun Jia, Zhigang Zhu, Mingjun Liu,Dong Lei, XiaofanGou. n-Phase micromechanical framework for the conductivity and elastic modulus of particulate composites: Design to microencapsulated phase change materials (MPCMs)-cementitious composites.Materials & Design, Volume 145, 2018, Pages 108-115.(IF:5.77, 中信所SCI二区)
[5].Feipeng Zhu, Pengxiang Bai, Yan Gong,Dong Lei*, Xiaoyuan He. Accurate measurement of elastic modulus of specimen with initial bending using two-dimensional DIC and dual-reflector imaging technique. Measurement,2018(119):18-27.(IF:2.791,中信所SCI三区)
[6].Lei Dong,He Jintao, Zhu Feipeng, Bai Pengxiang. Experimental Study on Dynamic Strength Improvement Mechanism of Concrete Materials. JOURNAL OF TESTING AND EVALUATION, 2018, 46(1):151-159. (SCI)
[7].Run Zhang, Pengxiang Bai,Dong Lei, Rui Xiao. Aging-dependent strain localization in amorphous glassy polymers: From necking to shear banding. International Journal of Solids and Structures, Volume 146, 2018, Pages 203-213.(IF:2.787,中信所SCI二区)
[8].Lei Dong; Bai Pengxiang; Zhu Feipeng. Measurement of installation deformation of the acetabulum during prosthetic replacement of a hip joint using digital image correlation MEASUREMENT SCIENCE AND TECHNOLOGY, 2018, 29(1): 015701.(IF:1.861,中信所SCI三区)
2017:
[1].Dong Lei; Zhentian Huang, Pengxiang Bai, Feipeng Zhu. Experimental research on impact damage of Xiaowan arch dam model by digital image correlation. Construction and Building Materials 147 (2017) 168–173 (IF:4.046,中信所SCI二区)
[2].Dong Lei, Pei Zhang, Jintao He, Pengxiang Bai, Feipeng Zhu. Fatigue life prediction method of concrete based on energy dissipation. Construction and Building Materials 145 (2017) 419–425. (IF:4.046,中信所SCI二区)
[3].Dong Lei, Jintao He,Pengxiang Bai and Feipeng Zhu, Normal deformation measurement of free surfaces on rocks under biaxial compression. MATERIALS TESTING, 2017, 59(11-12): 1075-1080.(SCI)
[4].Lei, D; Jiang, R; Bai, PX; Zhu, FP.Finite element analysis of a vibration test bed frame. MATERIALS TESTING, 2017, 59(2):183-187.(SCI)
[5].Dong Lei;Liqun Yang, Wenxiang Xu, Pei Zhang, Zhentian Huang. Experimental study on alarming of concrete micro-crack initiation based on wavelet packet analysis. Construction and Building Materials 149 (2017) 716–723. (IF:4.046,中信所SCI二区)
[6].Zhu, Feipeng; Gong, Yan; Bai, Pengxiang; Jiang, Zhencheng;Lei, Dong*. High-accuracy biaxial optical extensometer based on 2D digital image correlation. Measurement Science and Technology, 28 (2017) 085006. (IF:1.861,中信所SCI三区)
2016 & before：
[1].Feipeng Zhu, Pengxiang Bai, Hongjian Shi, Zhencheng Jiang,Dong Lei*, Xiaoyuan He. Enhancement of strain measurement accuracy using optical extensometer by application of dual-reflector imaging. Measurement Science and Technology, 27 (2016) 065007. (SCI)
[2].Feipeng Zhu, Dong Lei, Xiaoyuan He. Measurement System of Dynamic Microscopic Deformation for Membrane Based on Fringe Projection. Optical Engineering.2013 Vol. 52, No. 4(SCI)
[3].Feipeng Zhu, Hongjian Shi, Pengxiang Bai,Dong Lei, and Xiaoyuan He. Nonlinear calibration for generalized fringe projection profilometry under large measuring depth range. Applied Optics Vol. 52, Issue 32, pp. 7718-7723 (2013)(SCI)
[4].Chengbin Du, Shouyan Jiang, Wu QIN, Hairong Xu andDong Lei. Reconstruction of internal structures and numerical simulation for concrete composites at mesoscale. Computers and Concrete, Vol. 10, No. 2 (2012) 135-147.(SCI)
[5].LEI Dong,CHEN GuangYuan, CHEN YuQuan & REN QingWen. Experimental research and numerical simulation of RC beams strengthened with bonded steel plates. SCIENCE CHINA Technological Sciences, Vol.55 No.12: 3270–3277，2012. (SCI)
[6].D.Lei,F. Hou,X.Gong. Investigation of deformation at the grain scale in polycrystalline materials by coupling digital image correlation and digital microscopy. Experimental Techniques,36(2):24-31，2012.(SCI)

个人获奖：
2018年国家教学成果二等奖：建三优一高教学资源、创三位一体培养模式，造就工程力学创新人才（3/11）
2017年 江苏省教学成果一等奖：面向需求、内涵发展，工程力学人才培养体系的创新与实践（3/7）
2017年江苏省教学成果二等奖：虚实结合、科教互动，基础与专业并重的实验教学中心发展模式的探索与实践（2/9）
2017年河海大学教学成果特等奖：虚实结合、科教互动，建设基础与专业并重的国家级实验教学示范中心。（2/7）
2017年河海大学教学成果特等奖：面向需求、创新驱动，力学人才培养新体系的构建与实践（3/8）
2019年 江苏省优秀双创导师
2017年全国万名优秀创新创业导师
2016年河海大学优秀主讲教师
2016年河海大学第二十二届讲课竞赛普通组一等奖
2015年全国徐芝纶优秀力学教师奖
2015年江苏省力学优秀教师奖
2015-2018年4届国际力学竞赛优秀指导教师
2015年第十届全国周培源大学生力学竞赛优秀指导教师
2013年河海大学首届微课比赛三等奖
2013年第九届全国周培源大学生力学竞赛优秀指导教师
2012年河海大学优秀创新人才计划；
2012年江苏省高校青年骨干教师出国研修计划；
2012年河海大学青年岗位标兵；
2011年江苏省教学成果一等奖“建质量工程力学项目群，创立体化教学体系，促行业特色创新人才培养”；（9/10）
2010年第五届江苏省基础力学讲课竞赛三等奖；
2010年第四届全国基础力学讲课竞赛二等奖；
2010年第三届全国高等学校实验室工作论坛优秀论文全国三等奖；
2010年河海大学教学成果特等奖“力学实验课程体系和教学模式的探索与实践”(3/5)。