姓名
应国兵
性别
男
民族
汉
籍贯
江西
出生年月
1983.10
政治面貌
中共党员
最高学历
研究生
最高学位
工学博士
现任职务
教师
技术职称
教授
通讯地址
南京市江宁区佛城西路8号河海大学力学与材料学院
电话
yinggb2010@126.com
应国兵,男,1983年生,中共党员,工学博士,河海大学力学与材料学院青年教授,美国德雷塞尔大学材料科学与工程系兼职Faculty。世界陶瓷科学院国际陶瓷奖(International Ceramics Prize,World Academy of Ceramics)推荐专家,国家科学技术奖励评审专家,中国机械工程学会热处理分会表面工程技术委员会委员、表面沉积技术委员会委员,教育部学位与研究生教育中心评审专家,中国硅酸盐学会特种陶瓷分会理事,国家自然科学基金同行评议专家,中国电力企业联合会材料技术鉴定专家,江苏省复合材料学会陶瓷基复合材料委员会委员,中国复合材料学会会员,中国兵工学会会员,美国陶瓷学会会员,江苏省力学学会会员,Journal of the American Ceramic Society、Journal of Alloys and Compounds、Materials Science and Engineering A等二十多个期刊审稿人。
2011年毕业于哈尔滨工业大学,师从杜善义院士、赫晓东教授,获工学博士学位;
2012年4月进入河海大学力学与材料学院工作为讲师,同年12月进入河海大学力学博士后流动站工作,合作导师王乘校长/教授;2015年5月—2019年6月,河海大学力学与材料学院副教授;2019年6月—现今,河海大学力学与材料学院青年教授;
2016年3月—2017年3月,美国德雷塞尔大学(Drexel university),材料科学与工程系、化学与生物工程系访问****,合作者Dr&Prof. Michel W Barsoum、Dr&Prof. Aaron Fafarman;2017年2月—2017年9月,美国—muRata公司,电磁干扰屏蔽(EMI shielding)材料与技术项目负责研究员;2017年3月—2018年2月,美国德雷塞尔大学材料科学与工程系Faculty:Research Scientist。
主持国家装发部装备预研领域基金、国家装发部装备预研基金、国家科工局基础科研项目、国家自然科学基金面上项目、国家自然科学基金青年基金项目、国家总装备部装备预研教育部支持计划、中国博士后科学基金特别资助、中国博士后科学基金面上资助、教育部重点实验室开放课题、中央高校业务费自由探索项目等十余项项目,作为主要人员参与研究国家973项目、国家863项目、国家自然科学基金、装备部预研基金及其他省部级项目等十多项,参编书籍5本,获黑龙江省自然科学一等奖1项、黑龙江省高校科学技术一等奖1项、中航工业“腾龙”奖优秀奖1项、河海大学教师讲课竞赛一等奖1项,发表学术论文50余篇,其中SCI收录30余篇、EI收录10多篇,申请专利20余项,授权17项。
研究方向(材料科学与工程、力学):
1. 功能结构陶瓷及陶瓷基复合材料:三元纳米层状Mn+1AXn、二维层状材料(石墨烯与类石墨烯MXene)、硼化物、多孔氮化硅、超高温烧蚀材料、防热隔热材料;防火、耐(超)高温、耐腐蚀、耐磨磷酸盐水泥(陶瓷)和工程结构修复材料;
2. 金属及金属基复合材料:镍基合金、镁合金、钛合金、铜合金及镁铝基复合材料;
3. 材料表面处理与防护技术:表面与界面、纳米活化技术、机械活化技术、EBPVD、热喷涂、冷喷涂技术;
4. 力学:主要研究超常环境下材料和结构的力学行为与断裂损伤,研究材料本质属性、微观结构、力学行为和断裂破坏间关系,涉及多尺度复杂环境下结构和力学行为。
科研项目:
1. 国家自然科学基金项目,“Ta4AlC3基复合材料的二维类石墨烯结构MXene强韧化机制与超高温力学行为”,(负责,编号**,在研);
2. 国家装发部装备预研领域基金,“超材料光电器件”,(负责,编号XXX,在研);
3. 国家科工局基础科研计划项目,“连续氧化铝纤维XXX”,(负责,编号XXX,在研);
4. 国家装发部装备预研基金,“石墨烯超材料XXX”,(负责,编号XXX,已结题);
5. 国家自然科学基金项目,“网状结构Ta2AlC/TaC 复合材料的强韧化机理与烧蚀机制”,(负责,编号**,已结题);
6. 国家总装备部装备预研教育部支撑计划项目,“XXX多孔氮化硅陶瓷XXX”(负责、主要完成,编号XXX,已结题);
7. 中央高校业务费科技基础专项项目,“XXX涂层材料制备与性能研究”,(负责,编号XXX,在研);
8. 教育部重点实验室开放课题,“二维MXene增强轻质树脂基复合材料制备与性能研究”(负责,编号,在研);
9. 中国博士后科学基金特别资助项目. “纳米层状(Ta,Cr)2AlC陶瓷超高温力学行为与烧蚀机制”(负责,编号2014T70465,已结题);
10. 中国博士后科学基金面上资助项目,“水环境下Cr2AlC陶瓷空蚀-磨蚀的力学行为与破坏机制”(负责,编号2013M531261,已结题);
11. 中央高校业务费自由探索项目,“二维类石墨烯结构MXene制备与性能研究”,(负责,编号2018B17414,在研);
12. 中国航天三院研究所项目,“氮化硅粉体评价表征与性能研究”,(负责,编号K**,在研);
13. 横向技术开发项目,“循环流化床锅炉用耐火耐磨涂料制备”,(负责,编号,在研);
14. 横向技术服务项目,“氮化硅粉体性能研究”(负责,编号,在研);
15. 中央高校业务费自由探索项目,“多孔氮化硅陶瓷超高温烧蚀机制与力学行为”(负责,编号2015B21814,已结题);
16. 中央高校业务费自由探索项目,“多孔氮化硅陶瓷制备与性能的研究”(负责,编号2013B04914,已结题);
17. 中国电子科技集团公司第五十五研究所. “无氧铜等金属材料力学性能测试研究”(负责,编号,已结题)。
学术任职:
1.世界陶瓷科学院国际陶瓷奖推荐专家;
2.国家科学技术奖励评审专家;
3.中国机械工程学会热处理分会表面工程技术委员会委员;
4.中国机械工程学会热处理分会表面沉积技术委员会委员;
5.中国硅酸盐学会特种陶瓷分会理事;
6.教育部学位与研究生教育中心评审专家;
7.江苏省复合材料学会陶瓷基复合材料专业委员会委员;
8.美国陶瓷学会会员The American Ceramic Society, ACerS;
9.国家自然科学基金同行评议专家,中国复合材料学会会员,中国兵工学会会员,江苏省力学学会会员,“材料快讯”电子文摘副主编,Journal of the American Ceramic Society、Journal of Alloys and Compounds、Materials Science and Engineering A、International Journal of Applied Ceramic Technology等二十多个期刊审稿人。
奖励和荣誉称号:
1.黑龙江省科学技术奖自然科学一等奖,2019
2. 黑龙江省高校科学技术一等奖,2019
3. 国家留学基金委青年骨干教师,2015
4.河海大学教师讲课竞赛一等奖,2013
5.中航工业“腾龙”奖优秀奖,2011
指导及联合指导研究生:
硕士研究生:王鹏举(2012级),田宝娜、张晨、孟凡壹(2013级),韩建兴(2014级),詹枭雄、刘旭东(2015级),马凤辰、宿琳、杨青(2016级),张凯城、温鹏、窦康康(2017级),胡聪、张哲铭、文栋、高威(2018级),孙铖、赵银龙、吴毅然,张建新(2019级)。
博士研究生:张晨(2016级),刘璐(2017级)。
留 学 生:Abdessabour Benamor (Saber) (博士生,2019)。
欢迎材料科学与工程、力学、物理、化学和机械等专业的学生报考博士、硕士研究生,欢迎相关专业博士后的加盟!
境外合作单位:
美国橡树岭国家实验室、美国麻省理工学院、美国德雷塞尔大学、美国西北大学等机构
德国于利希研究中心、德国杜伊斯堡-埃森大学等机构
法国格勒诺布尔尼尔研究所等机构
英国帝国理工学院等机构
瑞典林雪平大学
学术论文:
2019年
1. Lu Liu, Guobing Ying*,Cong Hu, Kaicheng Zhang, Fengchen Ma, Lin Su, Chen Zhang,and Cheng Wang. Functionalization with MXene (Ti3C2) Enhances the Wettability and Shear Strength of Carbon Fiber-Epoxy Composites. ACS Applied Nano Materials, 2(9): 5553-5562, 2019 (期刊封面论文)
2. Zhang K., Ying G.*, Liu L., Ma F., Su L., Zhang C., ... & Zhou Y. Three-dimensional porous Ti3C2Tx-NiO composite electrodes with enhanced electrochemical performance for supercapacitors. Materials, 12(1), 188, 2019
3. Zhao D., Chen Z., Yang W., Liu S., Zhang X., Yu Y., Cheong. W., Zheng L., Ren F., Ying G., Cao X., Wang D., Peng Q., Wang G. and Chen C.. MXene (Ti3C2) Vacancy Confined Single-Atom Catalyst for Efficient Functionalization of CO2. Journal of the American Chemical Society. 141(9), 4086-4093, 2019
4. Zhonghua Dai, Dingyan Li, Jinglong Xie, Weiguo Liu, Shaobo Ge, Jin Zhang, Lu Liu, Yuanchao Zhu, Xin Zhao and Guobing Ying. Phase diagram determination of large piezoelectric response in BHT-BCT ceramics. Functional Materials Letters. **-1~4, 2019
5. 马凤辰,应国兵*,宿琳等. Ta2AlC-Ta4AlC3复合材料放电等离子烧结制备与力学性能. 硅酸盐学报. 47(1), 2019.
6. 杨小波,吕毅,王华栋,张冰清,应国兵. 尖晶石固化磷酸铝基复合材料的制备与性能. 材料导报. 33(9), 2019
2018年
7. Su L, Ying G, Liu L, et al. Ti3C2Txon copper and nickel foams with improved electrochemical performance produced via solution processing for supercapacitor. Processing and Application of Ceramics, 12(4): 366-373, 2018
8. Kota S., Wang W., Lu J., Natu V., Opagiste C., Ying G., & Barsoum M. W. . Magnetic properties of Cr2AlB2, Cr3AlB4, and CrB powders. Journal of Alloys and Compounds, 767, 474-482, 2018
9. Zhao D., Clites M., Ying G., Kota S., Wang J., Natu V., & Barsoum M. W.. Alkali-Induced Crumpling of Ti3C2Tx (MXene) to Form 3D Porous Networks for Sodium Ion Storage. Chemical Communications. 36, 2018
10. Ying G., Kota S., Dillon A. D., Fafarman A. T., & Barsoum M. W. Conductive transparent V2CTx (MXene) films. FlatChem. 8, 25-30, 2018.
11. Xunjun He, Yuan Yao, Yiming Huang, Qinfei Zhang, Lei Zhu, Fengmin Wu,Guobing Ying, Jiuxing Jiang, Active manipulation of electromagnetically induced reflection in complementary terahertz graphene metamaterial, Optics Communications. 407, 386-391, 2018.
12. Luo H., Su H., Li B., &Ying G.. Electrochemical and passive behaviour of tin alloyed ferritic stainless steel in concrete environment. Applied Surface Science. 439: 232-239, 2018.
2017年
13. Ying, G., Dillon, A. D., Fafarman, A. T., & Barsoum, M. W.. Transparent, conductive solution processed spincast 2D Ti2CTx (MXene) films. Materials Research Letters. 9439:1-8, 2017.
14. Guobing Ying*, Fengchen Ma, Lin Su, Xiaodong He, Cheng Zhang, Zhonghua Dai, Hong Luo, Shanyi Du, Cheng Wang. An ab initio prediction study of the electronic structure and elastic properties of V3GeC2. Processing and Application of Ceramics. 11 [2]: 82–86, 2017
15. 张晨,应国兵*, 王乘等. 高孔隙率多孔氮化硅构件较高马赫数下流-热-固耦合力学特性分析. 材料导报. 31(4): 131-136, 2017.
16. Dai Z., Liu L., Ying G., Yuan M., & Ren X.. Structural, dielectric and magnetic properties of Mn modified xBiFeO3-(1? x)BaTiO3ceramics. Journal of Magnetism and Magnetic Materials, 434, 10-13, 2017.
17. Luo H, Su H, Ying G, et al. Effect of cold deformation on the electrochemical behaviour of 304L stainless steel in contaminated sulfuric acid environment. Applied Surface Science, 2017, 425: 628-638.
2016年
18. He X., Zhang Q., Lu G., Ying G., Wu F., & Jiang J.. Tunable ultrasensitive terahertz sensor based on complementary graphene metamaterials. RSC Advances, 6(57), 52212-52218, 2016.
2015年
19. Tian Bao-Na; Ying Guo-Bing*; Wang Peng-Ju; Wang Cheng; Wu Yu-Ping. In-situ synthesis mechanism of nano-layered ternary Ta2AlC. Journal of Synthetic Crystals. 44(7):1773-1777, 2015
20. Ying Guobing*, Tian Baona, He Xiaodong, Du Shanyi, Wang Pengju, Wang Cheng, Wu Yuping. Influence of heat treatment on the microstructure and properties of Ti2AlCby SHS/PHIP. Rare Metal Materials and Engineering. 44,1: 340-344, 2015
21. Pengju, W., Yuping, W., Guobing, Y.*, Baona, T., & Cheng, W.. Influence of Al2O3 Hollow Sphere on the Microstructure and Mechanical Properties of Porous Si3N4 Ceramics.Rare Metal Materials and Engineering. 44, 615-618, 2015.
2014年
22. Guobing Ying*, Xiaodong He, Shanyi Du, Chuncheng Zhu, Yongting Zheng, Yuping Wu, Cheng Wang. Formation of Mn+1AXnphases in Ti–Cr–Al–C systems by self-propagating high-temperature synthesis. Rare metals. 33,4:419-426, 2014
23. 王鹏举,吴玉萍,应国兵*,田宝娜,王乘,李嘉,赵海伟.凝胶注模制备多孔氮化硅陶瓷. 硅酸盐学报. 42(12):1496-1500,2014
24. Liu LZ, Ying GB, Zhu J, et al. High-temperature compressive properties of TiC–TiB2/Cu composites prepared by self-propagating high-temperature synthesis. Rare Metals, 33(1): 95-98, 2014
25. 王鹏举, 吴玉萍, 应国兵*等. 多孔氮化硅陶瓷制备方法的研究进展. 材料导报: 纳米与新材料专辑. 28(2): 106-110, 2014.
26. Guo, W., Wu, Y., Zhang, J., Hong, S., Li, G., Ying, G., ... & Qin, Y. Fabrication and Characterization of Thermal-Sprayed Fe-Based Amorphous/Nanocrystalline Composite Coatings: An Overview. Journal of Thermal Spray Technology, 23(7), 1157-1180, 2014
27. Hong S., Wu Y., Zheng Y., Wang B., Gao W., Li G., Ying G., & Lin, J. (2014). Effect of Spray Parameters on the Corrosion Behavior of HVOF Sprayed WC-Co-Cr Coatings. Journal of materials engineering and performance, 23(4), 1434-1439, 2014
28. Guobing Ying*, Xiaodong He, Shanyi Du, Yongting Zheng, Chuncheng Zhu, Yuping Wu, Cheng Wang. Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems. Rare metals. 33,5:527-533, 2014
2013年
29. Ying Guobing*, Wu Yuping, He Xiaodong, Zhu Chuncheng, Du Shanyi, Wang Cheng, Li Gaiye. Effect of heat treatment on the microstructure and properties of Ti3AlC2-Cr2AlC-TiC composite. Rare Metal Materials and Engineering. 42,1: 618-622, 2013
30. Sheng Hong, Yuping Wu, Gaiye Li, Bo Wang, Wenwen Gao, Guobing Ying.Microstructural characteristics of high-velocity oxygen-fuel (HVOF) sprayed nickel-based alloy coating. Journal of Alloys and Compounds. 581:398–403, 2013
31. Sheng Hong, Yuping Wu, Qian Wang,Guobing Ying, Gaiye Li, Wenwen Gao, Bo Wang, Wenmin Guo. Microstructure and cavitation–silt erosion behavior of high-velocity oxygen–fuel (HVOF) sprayed Cr
32. Hong S., Wu Y.P., Wang Q., Li G.Y., Ying, G.B., Wang B., & Gao W.W. Cavitation silt erosion behaviour of HVOF sprayed nickel based alloy coatings.Surface Engineering, 29(8), 588-593, 2013
2012年以前
33. Guobing Ying, Xiaodong He, Mingwei Li, Wenbo Han, Fei He, Shanyi Du. Synthesis and mechanical properties of high-purity bulk Cr2AlC ceramic. Materials Science and Engineering A. 528:2635-2640, 2011
34. Guobing Ying, Xiaodong He, Mingwei Li, Shanyi Du, Wenbo Han, Fei He. Effect of Cr
35. H.L. Zhang, M.F. Zhang, J.C. Han,G.B. Ying, H.X. Guo, H.T. Shen, N.N. Song, C.H. Xu. Influence of the temperature and duration of the annealing on the lattice structure and growth of the Mg-Al spinel layer. Applied Surface Science.257: 5012-5016, 2011
36. M.F. Zhang, H.L. Zhang, J.C. Han, H.X. Guo, C.H. Xu, G.B. Ying, H.T. Shen, N.N. Song. Effect of neutron irradiation and subsequent annealing on the optical characteristics of sapphire. Physica B. 406: 494-497, 2011
37. Guobing Ying, Xiaodong He, Mingwei Li, Yibin Li, Shanyi Du. Synthesis and mechanical properties of nano-layered composite. Journal of Alloys and Compounds. 56:734-738,2010
38. G.B. Ying, X. Wang.Numerical simulation of the SHS temperature fields of Al-Ti-C system based on plane propagating pattern.International Journal of Modern Physics C 20:1087,2009
39. M. Li, G. Ying, X. He and S. Du. New Mn+1AXncompounds by thermal explosion in the Al-Cr-Si-C system. International Journal of Self-Propagating High-Temperature Synthesis.18: 273-275 , 2009
40. Xiang Wang, Guobing Ying. Microstructure and Strengthening Mechanism of TiCp/ZA-12 Composites. Key Engineering Materials.221:348-349, 2007
学术活动、报告或论文:
41. Ying Guobing*et al. Novel Processing of MXenes and Their Composites II. 43rdInternational Conference and Expo on Advanced Ceramics and Composites. Florida, USA, 2019 (S12分会主席)
42. 应国兵. 二维纳米层片结构MXene的力学、光学和电学特性. 第二十届全国高技术陶瓷学术年会. 中国呼和浩特. 2018 (特邀报告)
43. 应国兵. 二维纳米层片结构导电、透光、储能MXene陶瓷材料. 中国硅酸盐学会第一届青年****科研能力提升论坛. 中国昆明. 2018
44. Ying Guobing*; Dillon Andrew D.; Zhao Di; Mei Shan; Kota Sankalp, Michael Ghidiu; Li Christopher; Fafarman Aaron T.; Barsoum Michel. Transparent, conductive solution-processed 2D MXene films. Track A: Nano-laminated Ternary Carbides and Nitrides (MAX Phases) and 2D Phases (MXenes). 42nd International Conference and Expo on Advanced Ceramics and Composites. Florida, USA, 2018
45. 马凤辰, 应国兵等. 第十九届全国高技术陶瓷学术年会. 中国武汉. 2016
46. 宿琳, 应国兵等. 第十九届全国高技术陶瓷学术年会. 中国武汉. 2016
47. 应国兵. 第十八届全国高技术陶瓷学术年会. 中国广东清远. 2014
48. Guobing Ying, et al. Open Sino-Russian Workshop on SHS, 24-26 October, Beijing, China, 2012
49. 应国兵. 第十七届全国高技术陶瓷学术年会. 中国南京. 2012
50. Guobing Yinget al. XI International Symposium on Self-Propagating High-Temperature Synthesis, 5-9 September,Attica, Greece, 2011
51. Guobing Ying, et al. X International Symposium on Self-Propagating High-Temperature Synthesis, 6-11 July, Tsakhkadzor, Armenia, 2009
52. G.B. Ying, X. Wang .The 6th International Conference on Materials Processing for Properties and Performance. Beijing, China, 2007
部分专利:
1. 应国兵,王鹏举,田宝娜,王乘,吴玉萍,李嘉,赵海伟. 一种多孔氮化硅陶瓷的制备方法. 9.9;
2. 应国兵,王鹏举,王乘,吴玉萍,李嘉,赵海伟,郭文敏. 一种多孔氮化硅陶瓷的制备方法. 4.7;
3. 应国兵,田宝娜,王乘,张晨.一种放电等离子烧结工艺制备Ta2AlC块体陶瓷的方法. 7.7;
4. 应国兵,田宝娜,王乘,张晨.一种机械活化热压制备Ta2AlC块体陶瓷的方法. 8.6;
5. 应国兵,田宝娜,王乘,王鹏举,张晨.一种Ta2AlC块体陶瓷的制备方法. 0.0;
6. 田宝娜,应国兵,王乘,王鹏举,吴玉萍,张晨. 一种燃烧合成制备Ta2AlC陶瓷粉体的方法. 8.6;
个人主页