姓名：赵宝军 性别：男
所在系所：中澳REEM国际研究院（南昌/赣州）
学位/职称/职务：博士/教授/执行院长
通讯地址：江西省赣州市客家大道156号
电话： 电子邮箱：baojun16302@163.com
个人简介
赵宝军，北京大学化学系获学士和硕士学位，澳大利亚昆士兰大学获冶金专业博士学位。曾任澳大利亚昆士兰大学方圆研究员，Codelco-方圆教授等职，现任江西理工大学教授。主要进行火法冶金过程的基础和应用研究，包括冶金渣的高温物理化学，冶金反应动力学以及新冶炼技术和耐火材料的研究。利用独立开发的世界领先的研究技术，在渣的相平衡和粘度研究领域作出了突出的贡献。编辑出版了6本书，在国际知名冶金和材料期刊和国际会议发表200多篇文章。获得美国陶瓷学会的Spriggs相平衡奖，英国材料冶金学会的“Billiton Gold Medal”和加拿大冶金季刊（Canadian Metallurgical Quarterly）的“Best Paper Award”。多次受邀参与组织国际学术会议并做主题报告。长期和国内外冶金企业进行合作研究，主持了上千万澳元的研究项目。
研究方向
080601冶金物理化学 080603有色金属冶金 085205冶金工程
研究兴趣
· 钨渣的无害化和资源化处理
· 绿色高效钨冶金新工艺开发
· 冶金固废资源化的基础和应用研究
· 铜火法冶炼相关的基础和应用研究
· 稀土氧化物电解熔盐系统物理化学性质研究




近两年发表论文
1. Wang X., Ma X., Su K., Liao C. and Zhao B., “Fundamental studies for high temperature processing of tungsten leaching residues for alloy formation”, Tungsten, 2020, Vol. 2(4), pp. 362-370, DOI: 10.1007/s42864-020-00064-4.
2. Wang D., Chen M., Jiang Y., Wang S., Zhao Z., Evans T. and Zhao B., “Phase Equilibria Studies in the CaO-SiO₂-Al₂O₃-MgO System with CaO/SiO₂ Ratio of 0.9, Journal of the American Ceramic Society, 2020, Vol 103, pp. 7299-7309.
3. Feng D., Zhang J., Li M., Chen M. and Zhao B., “Phase Equilibria of the SiO₂-V₂O₅ system”, Ceramics International, 2020, Vol. 46, pp. 24053-24059.
4. Sun Y., Chen M., Cui Z., Contraras L. and Zhao B., “Equilibria of iron silicate slags for continuous converting copper-making process based on phase transformations”, Metallurgical and Materials Transactions B, 2020, Vol. 51B, pp. 2039-2045.
5. Sun Y., Chen M., Balladares E., Pizarro C., Contraras L. and Zhao B., “Effect of MgO on the liquid/spinel/matte/gas equilibria in the Si-Fe-Ca-O-Cu-S system at controlled P(SO₂) 0.3 and 0.6 atm”, CALPHAD, 2020, Vol. 70, 101803.
6. Sun Y., Chen M., Cui Z., Contraras L. and Zhao B., “Phase equilibria of ferrous-calcium silicate slags in the liquid/spinel/white metal/gas system for the copper converting process”, Metallurgical and Materials Transactions B, 2020, Vol. 51B, pp. 2012-2020.
7. Su K., Ma X., Parianos J. and Zhao B., “Thermodynamic and Experimental Study on Efficient Extraction of Valuable Metals from Polymetallic Nodules”, Minerals, 2020, Vol. 10, paper 360.
8. Sun Y., Chen M., Cui Z., Contraras L. and Zhao B., “Development of Ferrous-Calcium Silicate Slag for Direct to Blister Copper-Making Process and the Equilibria Investigation”, Metallurgical and Materials Transactions B, 2020, Vol. 51B, pp. 973-984.
9. Sun Y., Chen M., Balladares E., Pizarro C., Contraras L. and Zhao B., “Effect of CaO on the liquid/spinel/matte/gas equilibria in the Si-Fe-Ca-O-Cu-S system at controlled P(SO2) 0.3 and 0.6 atm”, CALPHA, 2020, Vol. 69, pp. 1-8.
10. Sun Y., Chen M., Cui Z., Contraras L. and Zhao B., “Phase equilibrium studies of iron silicate slag under in the liquid/spinel/white metal/gas system for copper converting process”, Metallurgical and Materials Transactions B, 2020, Vol. 51B, pp. 426-432.
11. Lyu S., Ma X., Chen M., Huang Z., Yao Z., Wang G., and Zhao B., “Application of Phase Equilibrium of CaO-SiO₂-Al₂O₃-MgO System for Oxide Inclusions in Si-deoxidized Steels”, CALPHAD, 2020, Vol 79, 101721,
12. Sun Y., Chen M., Cui Z., Contraras L. and Zhao B., “Phase equilibrium studies of iron silicate slag under direct to blister copper-making condition”, Metallurgical and Materials Transactions B, 2020, Vol. 51B, pp. 1-5.
13. Chen M., Sun Y., Balladares E., Pizarro C. and Zhao B., “Experimental Studies of Liquid/spinel/matte/gas Equilibria in the Si-Fe-O-Cu-S System at Controlled Pso₂ 0.3 and 0.6 atm”, CALPHAD, 2019, Vol 66 101642.
14. Lyu S., Ma X., Huang Z., Yao Z., Lee H.G., Jiang Z., Wang G., Zou J. and Zhao B., “Formation Mechanism of Al₂O₃-containing Inclusions in Al-Deoxidized Spring Steel”, Metallurgical and Materials Transactions B, 2019, Vol. 50B, pp. 2205-2220.
15. Lyu S., Ma X., Huang Z., Yao Z., Lee H.G., Jiang Z., Wang G., Zou J. and Zhao B., “Understanding the Formation and Evolution of Oxide Inclusions in Si-Deoxidized Spring Steel”, Metallurgical and Materials Transactions B, 2019, Vol. 50B, pp. 1862-1877.
16. Sun Y., Chen M. and Zhao B., “Modification of the microstructures of CaO-SiO₂-Al₂O₃-MgO slags using various minor elements”, Journal of Non-Crystalline Solids, 2019, Vol. 515, pp. 50–57.
17. Cheng X., Cui Z., Contreras L., Chen M., Nguyen A. and Zhao B., “Matte Entrainment by SO₂ Bubbles in Copper Smelting Slag”, JOM, 2019, Vol. 71(5), pp. 1897-1903l.
18. Jiang X., Cui Z., Chen M. and Zhao B., “Study of plume eye in the copper bottom blown smelting furnace”, Metallurgical and Materials Transactions B, 2019, Vol. 50B, pp. 782-789.
19. Lv S., Ma X., Huang Z., Yao Z., Lee H.G., Jiang Z., Wang G., Zou J. and Zhao B., “Inclusion Characterization and Formation Mechanisms in Spring Steel Deoxidized by Silicon”, Metallurgical and Materials Transactions B, 2019, Vol. 50B, pp. 732-747
20. Cornejo K., Chen M. and Zhao B., “Control of Copper Loss in Flash Smelting Slag”, Materials Engineering - From Ideas to Practice, The Minerals, Metals & Materials Series, publisher Springer International Publishing, ISSN 2367-1181, ISBN 978-3-030-65240-1, 2021, pp. 71-79, DOI: https://doi.org/10.1007/978-3-030-65241-8_7.
21. Ma L., Qing G., Zhao Z. and Zhao B., “Effect of Boron Iron Concentrate on the Strength of Preheated Iron Ore Pellets”, Materials Engineering - From Ideas to Practice, The Minerals, Metals & Materials Series, publisher Springer International Publishing, ISSN 2367-1181, ISBN 978-3-030-65240-1, 2021, pp. 71-79, DOI: https://doi.org/10.1007/978-3-030-65241-8_8.
22. Sun Y., Yao Y., Chen M. and Zhao B., “Structural Characterization of the “FeO”-SiO₂ Slags Using Raman Spectra”, Materials Engineering - From Ideas to Practice, The Minerals, Metals & Materials Series, publisher Springer International Publishing, ISSN 2367-1181, ISBN 978-3-030-65240-1, 2021, pp. 181-189, DOI: https://doi.org/10.1007/978-3-030-65241-8_17.
23. Cui W., Chen M. and Zhao B., “Pyrometallurgical Recovery of Valuable Metals from Flue Dusts of Copper Smelter through lead alloy”, Proceedings of 9^th International Symposium on Lead and Zinc Processing, Editors A. Siegmund, S. Alam, J. Grogan, U. Kerney, E. Shibata, publisher Springer International Publishing, ISBN: 95, 2020, pp. 539-547, DOI: https://doi.org/10.1007/978-3-030-37070-1_46.
24. Wang X., Ma X., Liao C. and Zhao B., “High Temperature Processing of Tungsten Slag”, Proceedings of the 11^th International Symposium on High-Temperature Metallurgical Processing, Editors Z. Peng, J.-Y. Hwang, J.P. Downey, D. Gregurek, B. Zhao, O. Yucel, E. Keskinkilic, T. Jiang, J.F. White and M.M. Mahmoud, publisher Springer International Publishing, ISBN: 94, 2020, pp. 289-294, DOI: https://doi.org/10.1007/978-3-030-36540-0_26.
25. Hua Y. and Zhao B., “Phase equilibria in the system Al₂O₃-MnO-SiO₂: thermodynamic and application”, Proceedings of the 11^th International Symposium on High-Temperature Metallurgical Processing, Editors Z. Peng, J.-Y. Hwang, J.P. Downey, D. Gregurek, B. Zhao, O. Yucel, E. Keskinkilic, T. Jiang, J.F. White and M.M. Mahmoud, publisher Springer International Publishing, ISBN: 94, 2020, pp. 183-191, DOI: https://doi.org/10.1007/978-3-030-36540-0_17.
26. Ma X., Zhang P., Dong T., Wang F., Chen J. and Zhao B., “Development of Offshore Steel for High Heat Input Welding”, Proceedings of the 10^th International Symposium on High-Temperature Metallurgical Processing, Editors T. Jiang, J.-Y. Hwang, D. Gregurek, Z. Peng, J.P. Downey, B. Zhao, O. Yucel, E. Keskinkilic and R. Padilla, publisher Springer International Publishing, ISBN: 45, 2019, pp. 289-296, DOI: https://doi.org/10.1007/978-3-030-05955-2_27.
27. Ma X., Sun Y., Zhang P., Liu H., Rong Z., Wang G. and Zhao B., “Effects of Ca, Mg and Ti Additions on the Microstructures of Offshore Steels for High-Heat-Input Welding”, Proceedings of the 8^th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019), Association for Iron & Steel Technology, ISBN: 978-1-935117-82-7, 13–15 August 2019, Toronto, Ont., Canada, DOI 10.33313/503/017.
28. Ma X., Cui Z., Contreras L., Jiang X., Chen M. and Zhao B., “Fluid Dynamics Studies of Bottom-Blown and Side-Blown Copper Smelting Furnaces”, Proceedings of the 58^th Annual Conference of Metallurgists (COM) Hosting the 10^th International Copper Conference 2019, ISBN: 978-1-926872-44-5, 18 - 21 August 2019, Vancouver, Canada, Paper 590163 (8 pages).