Furong GAO
高福榮
PhD in Chemical Engineering
McGill University, 1993

Chair Professor
Department of Chemical and Biological Engineering

Director of Center for Polymer Processing and Systems



(852) 2358 7139
kefgao@ust.hk
Room 4558
Personal Web

---

Google Scholar
HAgn6Z4AAAAJ

ORCID
0000-0002-5900-1353

Scopus ID
7403139687




Research Interest Publications Projects Teaching Assignment RPG Supervision Space used




Research Interest

---

Process modeling
Control and monitoring
Polymer processing



Publications

---

All Years 541 2022 1 2021 17 2020 18 2019 23 2018 29 2017 28 2016 425

---

Expand All Collapse All


2022 1

Retrospective comparison of several typical linear dynamic latent variable models for industrial process monitoring
Computers and Chemical Engineering, v. 157, January 2022, article number 107587
Zheng, Jiale; Zhao, Chunhui; Gao, Furong Article

2021 17

A Balancing Current Ratio based State-Of-Health Estimation Solution For Lithium-Ion Battery Pack
IEEE Transactions on Industrial Electronics, 3 September 2021, p. 1-1
Tang, Xiaopeng; Gao, Furong; Liu, Kailong; Liu, Qi; Foley, Aoife M. Article
An improved real-valued negative selection algorithm based on the constant detector for anomaly detection
Journal of Intelligent and Fuzzy Systems, v. 40, (5), 22 April 2021, p. 8793-8806
Li, Dong; Sun, Xin; Gao, Furong; Liu, Shulin Article
Comprehensive study and improvement of experimental methods for obtaining referenced battery state-of-power
Journal of Power Sources, v. 512, November 2021, article number 230462
Tang, Xiaopeng; Liu, Kailong; Liu, Qi; Peng, Qiao; Gao, Furong Article
Constrained Model Predictive Fault-Tolerant Control for Multi-Time-Delayed Batch Processes with Disturbances: A Lyapunov-Razumikhin Function Method
Journal of the Franklin Institute, October 2021
Wang, Limin; Song, Jiang; Zhang, Ridong; Gao, Furong Article
Continual learning classification method and its application to equipment fault diagnosis
Applied Intelligence, 12 May 2021
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin Article
Continual learning classification method for time-varying data space based on artificial immune system
Journal of Intelligent and Fuzzy Systems, v. 40, (5), 22 April 2021, p. 8741-8754
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin Article
Continual learning classification method with constant-sized memory cells based on the artificial immune system
Knowledge-Based Systems, v. 213, February 2021, article number 106673
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin Article
Control-Oriented Two-Dimensional Online System Identification for Batch Processes
Industrial and Engineering Chemistry Research, v. 60, (20), May 2021, p. 7656-7666
Gao, Kaihua; Lu, Jingyi; Xu, Zuhua; Gao, Furong Article
Data-Efficient Constrained Learning for Optimal Tracking of Batch Processes
Industrial and Engineering Chemistry Research, v. 60, (43), October 2021, p. 15658-15668
Zhou, Yuanqiang; Gao, Kaihua; Li, Dewei; Xu, Zuhua; Gao, Furong Article
Fault Diagnosis of Complex Chemical Processes Using Feature Fusion of a Convolutional Network
Industrial and Engineering Chemistry Research, v. 60, (5), February 2021, p. 2232-2248
Wang, Nan; Li, Haisheng; Wu, Feng; Zhang, Ridong; Gao, Furong Article
Iterative Learning Control for Multiphase Batch Processes With Asynchronous Switching
IEEE Transactions on Systems Man Cybernetics-Systems, v. 51, (4), April 2021, article number 8721522, p. 2536-2549
Wang, Limin; Yu, Jingxian; Zhang, Ridong; Li, Ping; Gao, Furong Article
Non-stationary data reorganization for weighted wind turbine icing monitoring with Gaussian mixture model
Computers and Chemical Engineering, v. 147, April 2021, article number 107241
Jing, Hua; Zhao, Chunhui; Gao, Furong Article
Optimal synchronization control for heterogeneous multi-agent systems: Online adaptive learning solutions
Asian Journal of Control, August 2021
Zhou, Yuanqing; Li, Dewei; Gao, Furong Article
RBF Neural Network Modeling Approach Using PCA Based LM–GA Optimization for Coke Furnace System
Applied Soft Computing, v. 111, November 2021, article number 107691
Tao, Jili; Yu, Zheng; Zhang, Ridong; Gao, Furong Article
Reconstruction of the Incremental Capacity Trajectories from Current-Varying Profiles for Lithium-Ion Batteries
Iscience, v. 24, (10), 22 October 2021, article number 103103
Tang, Xiaopeng; Wang, Yujie; Liu, Qi; Gao, Furong Article
Recovering Large-scale Battery Aging Dataset With Machine Learning
Patterns, v. 2, (8), 13 August 2021, article number 100302
Tang, Xiaopeng; Liu, Kailong; Li, Kang; Widanage, Widanalage Dhammika; Kendrick, Emma; Gao, Furong Article
Two-Dimensional Iterative Learning Model Predictive Control for Batch Processes: A New State Space Model Compensation Approach
IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 51, (2), February 2021, p. 833-841
Zhang, Ridong; Gao, Furong Article

2020 18

A More General Incremental Inter -Agent Learning Adaptive Control for Multiple Identical Processes in Mass Production
Neurocomputing, v. 397, July 2020, p. 70-93
Qu, Hongyi; Li, Dewei; Zhang, Ridong; Yang, Shuang-Hua; Gao, Furong Article
A New Synthetic Minmax Optimization Design of H∞ LQ Tracking Control for Industrial Processes under Partial Actuator Failure
IEEE Transactions on Reliability, v. 69, (1), March 2020, article number 8601405, p. 322-333
Zhang, Ridong; Gao, Furong Article
Battery incremental capacity curve extraction by a two-dimensional Luenberger–Gaussian-moving-average filter
Applied Energy, v. 280, 15 September 2020, article number 115895
Tang, Xiaopeng; Liu, Kailong; Lu, Jingyi; Liu, Boyang; Wang, Xin; Gao, Furong Article
Continual learning classification method with new labeled data based on the artificial immune system
Applied Soft Computing Journal, v. 94, September 2020, article number 106423
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin Article
Data-Driven Batch-End Quality Modeling and Monitoring Based on Optimized Sparse Partial Least Squares
IEEE Transactions on Industrial Electronics, v. 67, (5), May 2020, p. 4098-4107
Jiang, Qingchao; Yan, Xuefeng; Yi, Hui; Gao, Furong Article
Data-Driven Two-Dimensional Deep Correlated Representation Learning for Nonlinear Batch Process Monitoring
IEEE Transactions on Industrial Informatics, v. 16, (4), April 2020, p. 2839-2848
Jiang, Qingchao; Yan, Shifu; Yan, Xuefeng; Yi, Hui; Gao, Furong Article
Design of a Switching Control Strategy for Time-Varying Delay Batch Processes Using Fault Probability-Based Average Dwell Time Method
Industrial & Engineering Chemistry Research, v. 59, (11), March 2020, p. 5087-5102
Wang, Limin; Li, Bingyun; Zhang, Ridong; Gao, Furong Article
Design of Modified 2-Degree-of-Freedom Proportional–Integral–Derivative Controller for Unstable Processes
Measurement and Control, v. 53, (7-8), August 2020, p. 1465-1471
Li, Ziwei; Xu, Zheng; Zhang, Ridong; Zou, Hongbo; Gao, Furong Article
Fast economic model predictive control for marine current turbine generator system
Renewable Energy, v. 166, April 2020, p. 108-116
Teng, Yiming; Hu, Dewen; Wu, Feng; Zhang, Ridong; Gao, Furong Article
Intelligent Fault Diagnosis for Chemical Processes Using Deep Learning Multimodel Fusion
IEEE Transactions on Cybernetics, 30 December 2020
Wang, Nan; Yang, Fan; Zhang, Ridong; Gao, Furong Article
Joint estimation of battery state-of-charge and state-of-health based on a simplified pseudo-two-dimensional model
Electrochimica Acta, v. 344, June 2020, article number 136098
Liu, Boyang; Tang, Xiaopeng; Gao, Furong Article
Linearity Decomposition-Based Cointegration Analysis for Nonlinear and Nonstationary Process Performance Assessment
Industrial and Engineering Chemistry Research, v. 59, (7), February 2020, p. 3052-3063
Zou, Xiaoyu; Zhao, Chunhui; Gao, Furong Article
Model Migration Neural Network for Predicting Battery Aging Trajectories
IEEE Transactions on Transportation Electrification, v. 6, (2), June 2020, p. 363-374
Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Gao, Furong; Marco, James; Widanage, W. Dhammika Article
Multiphase two-dimensional time-slice dynamic system for batch process monitoring
Journal of Process Control, v. 85, January 2020, p. 184-198
Zhu, Jinlin; Yao, Yuan; Gao, Furong Article
Nonlinear Process Quality Prediction Using Wavelet Denoising OSC-SVM-PLS
Industrial and Engineering Chemistry Research, v. 59, (13), April 2020, p. 6021-6032
Yang, Fan; Li, Xiang; Bai, Jianjun; Zhang, Ridong; Gao, Furong Article
Optimal Iterative Learning Control for Batch Processes in the Presence of Time-Varying Dynamics
IEEE Transactions on Systems, Man, and Cybernetics: Systems, 10 November 2020
Lu, Jingyi; Cao, Zhixing; Hu, Qinran; Xu, Zuhua; Du, Wenli; Gao, Furong Article
Synthesis of ILC-MPC controller with data-driven approach for constrained batch processes
IEEE Transactions on Industrial Electronics, v. 67, (4), April 2020, article number 8691673, p. 3116-3125
Li, Dewei; He, Shaoying; Xi, Yugeng; Liu, Tao; Gao, Furong; Wang, Youqing; Lu, Jingyi Article
Iterative learning stabilization and fault-tolerant control for batch processes
Iterative Learning Stabilization and Fault-Tolerant Control for Batch Processes / Limin Wang, Ridong Zhang, Furong Gao. Singapore : Springer Nature Singapore Pte Ltd., 2020
Wang, Limin; Zhang, Ridong; Gao, Furong Book

2019 23

110th Anniversary: An Overview on Learning-Based Model Predictive Control for Batch Processes
Industrial and Engineering Chemistry Research, v. 58, (37), September 2019, p. 17164-17173
Lu, Jingyi; Cao, Zhixing; Zhao, Chunhui; Gao, Furong Article
2D Switched Model-Based Infinite Horizon LQ Fault-Tolerant Tracking Control for Batch Process
Industrial and Engineering Chemistry Research, v. 58, (22), June 2019, p. 9540-9551
Luo, Weiping; Wang, Limin; Zhang, Ridong; Gao, Furong Article
A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging
Energy Conversion and Management, v. 180, January 2019, p. 162-170
Tang, Xiaopeng; Wang, Yujie; Zou, Changfu; Yao, Ke; Xia, Yongxiao; Gao, Furong Article
Aging trajectory prediction for lithium-ion batteries via model migration and Bayesian Monte Carlo method
Applied Energy, v. 254, November 2019, article number 113591
Tang, Xiaopeng; Zou, Changfu; Yao, Ke; Lu, Jingyi; Xia, Yongxiao; Gao, Furong Article
Batch Process Modeling and Monitoring With Local Outlier Factor
IEEE Transactions on Control Systems Technology, v. 27, (4), July 2019, article number 8325416, p. 1552-1565
Zhu, Jinlin; Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Education in Process Systems Engineering: Why It Matters More Than Ever and How It Can Be Structured
Computers and Chemical Engineering, v. 126, July 2019, p. 102-112
Cameron, Ian T.; Engell, Sebastian; Georgakis, Christos; Asprion, Norbert; Bonvin, Dominique; Gao, Furong; Gerogiorgis, Dimitrios I.; Grossmann, Ignacio E.; Macchietto, Sandro; Preisig, Heinz A.; Young, Brent R. Article
Incipient Fault Detection for Multiphase Batch Processes with Limited Batches
IEEE Transactions on Control Systems Technology, v. 27, (1), January 2019, article number 8100636, p. 103-117
Zhang, Shumei; Zhao, Chunhui; Gao, Furong Article
Load-responsive model switching estimation for state of charge of lithium-ion batteries
Applied Energy, v. 238, March 2019, p. 423-434
Tang, Xiaopeng; Gao, Furong; Zou, Changfu; Yao, Ke; Hu, Wengui; Wik, Torsten Article
Model migration based battery power capability evaluation considering uncertainties of temperature and aging
Journal of Power Sources, v. 440, 15 November 2019, article number 227141
Tang, Xiaopeng; Wang, Yujie; Yao, Ke; He, Zhenwei; Gao, Furong Article
Multiobjective Two-Dimensional CCA-Based Monitoring for Successive Batch Processes with Industrial Injection Molding Application
IEEE Transactions on Industrial Electronics, v. 66, (5), May 2019, article number 8424187, p. 3825-3834
Jiang, Qingchao; Gao, Furong; Yan, Xuefeng; Yi, Hui Article
Multipoint Iterative Learning Mode Predictive Control
IEEE Transactions on Industrial Electronics, v. 66, (8), August 2019, article number 8482502, p. 6230-6240
Lu, Jingyi; Cao, Zhixing; Gao, Furong Article
Multivariate Statistical Monitoring of Key Operation Units of Batch Processes Based on Time-Slice CCA
IEEE Transactions on Control Systems Technology, v. 27, (3), May 2019, article number 8301609, p. 1368-1375
Jiang, Qingchao; Gao, Furong; Yi, Hui; Yan, Xuefeng Article
Nonlinear Multivariate Quality Prediction Based on OSC-SVM-PLS
Industrial and Engineering Chemistry Research, v. 58, (19), May 2019, p. 8154-8161
Li, Xiang; Wu, Feng; Zhang, Ridong; Gao, Furong Article
Performance-relevant kernel independent component analysis based operating performance assessment for nonlinear and non-Gaussian industrial processes
Chemical Engineering Science, v. 209, December 2019, article number 115167
Liu, Yan; Print Email Wang, Fuli; Chang, Yuqing; Gao, Furong; He, Dakuo Article
PI Based Indirect-Type Iterative Learning Control for Batch Processes with Time-Varying Uncertainties: A 2D FM Model Based Approach
Journal of Process Control, v. 78, June 2019, p. 57-67
Hao, Shoulin; Liu, Tao; Gao, Furong Article
Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries
Journal of Power Sources, v. 440, November 2019, article number 227118
Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Liu, Boyang; Gao, Furong; Widanalage, Dhammika Widanage Article
Run-To-Run Control for Active Balancing of Lithium Iron Phosphate Battery Packs
IEEE Transactions on Power Electronics, v. 35, (2), February 2020, article number 8725519, p. 1499-1512
Tang, Xiaopeng; Zou, Changfu; Wik, Torsten; Yao, Ke; Xia, Yongxiao; Wang, Yujie; Yang, Duo; Gao, Furong Article
多阶段间歇过程无穷时域优化线性二次容错控制
化工学报=CIESC Journal, v. 70, (2), February 2019, p. 541-547
王立敏; 卢丽彬; 高福荣; 周东华 Article
多階段間歇過程無窮時域優化線性二次容錯控制
化工学报 =CIESC Journal, v. 70, (2), 2019, p. 541-547
王立敏; 卢丽彬; 高福荣; 周东华 Article
Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model
Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model / by Ridong Zhang, Anke Xue and Furong Gao. Singapore: Springer, 2019.
Zhang, Ridong; Xue, Anke; Gao, Furong Book
A Polytopic Invariant Set Based Iterative Learning Model Predictive Control
IFAC-PapersOnLine, v. 52, (1), 2019, p. 649-654
Lu, Jingyi; Gao, Furong Conference paper
Battery State of Charge Estimation Based on a Pure Hardware Implementable Method
2018 Joint International Conference on Energy, Ecology and Environment (ICEEE 2018) and International Conference on Electric and Intelligent Vehicles (ICEIV 2018), 2018, article number v. 53
Tang, Xiaopeng; Gao, Furong; Yao, Ke; Wang, Yujie Conference paper
Predicting Battery Aging Trajectory via a Migrated Aging Model and Bayesian Monte Carlo Method
Energy Procedia, v. 158, February 2019, p. 2456-2461
Tang, Xiaopeng; Yao, Ke; Zou, Changfu; Liu, Boyang; Gao, Furong Conference paper

2018 29

A fast estimation algorithm for lithium-ion battery state of health
Journal of Power Sources, v. 369, August 2018, p. 453-458
Tang, Xiaopeng; Zou, Changfu; Yao, Ke; Chen, Guohua; Liu, Boyang; He, Zhenwei; Gao, Furong Article
A hybrid 2D fault-tolerant controller design for multi-phase batch processes with time delay
Journal of Process Control, v. 69, Septemer 2018, p. 138-157
Shen, Yiteng; Wang, Limin; Yu, Jingxian; Zhang, Ridong; Gao, Furong Article
A Systematic Min-Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes against Uncertainty
IEEE Transactions on Control Systems Technology, v. 26, (6), November 2018, article number 8036408, p. 2157-2164
Zhang, Ridong; Wu, Sheng; Cao, Zhixing; Lu, Jingyi; Gao, Furong Article
An Automatic Glucose Monitoring Signal Denoising Method With Noise Level Estimation and Responsive Filter Updating
Biomedical Signal Processing and Control, v. 41, March 2018, p. 172-185
Zhao, Hong; Zhao, C.; Gao, Furong Article
An incremental Inter-agent learning method for adaptive control of multiple identical processes in mass production
Neurocomputing, v. 315, November 2018, p. 322-344
Qu, Hongyi; Li, Dewei; Zhang, Ridong; Gao, Furong Article
An Intelligent Non-optimality Self-recovery Method Based on Reinforcement Learning With Small Data in Big Data Era
Chemometrics and Intelligent Laboratory Systems, v. 176, May 2018, p. 89-100
Qin, Yan; Zhao, Chunhui; Gao, Furong Article
Data Driven Modeling Using an Optimal Principle Component Analysis Based Neural Network and Its Application to a Nonlinear Coke Furnace
Industrial and Engineering Chemistry Research, v. 57, (18), May 2018, p. 6344-6352
Zhang, Ridong; Lv, Qiang; Tao, Jili; Gao, Furong Article
Delay-Range-Dependent-Based Hybrid Iterative Learning Fault-Tolerant Guaranteed Cost Control for Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 57, (8), February 2018, p. 2932-2944
Wang, Limin; Liu, Bing; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong Article
Design of Fuzzy Iterative Learning Fault-tolerant Control for Batch Processes with Time-varying Delays
Optimal Control Applications and Methods, v. 39, (6), November 2018, p. 1887-1903
Wang, Limin; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong Article
Gaussian Process Regression and Bayesian Inference Based Operating Performance Assessment for Multiphase Batch Processes
Industrial & Engineering Chemistry Research, v. 57, (21), May 2018, p. 7232-7244
Liu, Yan; Wang, Xiaojun; Wang, Fuli; Gao, Furong Article
Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty
Industrial and Engineering Chemistry Research, v. 57, (51), December 2018, p. 17462-17469
Hu, Xiaomin; Wang, Limin; Gao, Furong Article
Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes
Journal of Shanghai Jiaotong University (Science), v. 23, (6), December 2018, p. 811-819
Wang, Limin; Wang, Runze; Xiong, Yuting; Wang, Haosen; Zhu, Lin; Zhang, Ke; Gao, Furong Article
Hierarchical multiblock T-PLS based operating performance assessment for plant-wide processes
Industrial and Engineering Chemistry Research, v.57, (43), October 2018, p. 14617-14627
Liu, Yan; Wang, Fuli; Gao, Furong; Cui, Haonan Article
Hybrid Iterative Learning Fault-tolerant Guaranteed Cost Control Design for Multi-phase Batch Processes
Canadian Journal of Chemical Engineering, v. 96, (2), February 2018, p. 521-530
Wang, Limin; Shen, Yiteng; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong Article
Improved Nonlinear Quality Estimation for Multiphase Batch Processes Based on Relevance Vector Machine with Neighborhood Component Variable Selection
Industrial and Engineering Chemistry Research, v. 57, (2), January 2018, p. 666-676
Zhu, Jinlin; Gao, Furong Article
Inner-phase and inter-phase analysis based operating performance assessment and nonoptimal cause identification for multiphase batch processes
Chemical Engineering Research and Design, v. 134, June 2018, p. 292-308
Liu, Yan; Ma, R.; Wang, F.; Chang, Y.; Gao, Furong Article
Linearity Evaluation and Variable Subset Partition Based Hierarchical Process Modeling and Monitoring
IEEE Transactions on Industrial Electronics, v. 65, (3), March 2018, article number 8017442, p. 2683-2692
Li, Wenqing; Zhao, Chunhui; Gao, Furong Article
Long-term battery voltage, power, and surface temperature prediction using a model-based extreme learning machine
Energies, v. 11, (1), January 2018, article number 86
Tang, Xiaopeng; Yao, Ke; Liu, Boyang; Hu, Wengui; Gao, Furong Article
Mixed-effects Gaussian Process Modeling Approach With Application in Injection Molding Processes
Journal of Process Control, v. 62, February 2018, p. 37-43
Luo, Linkai; Yao, Yuan; Gao, Furong; Zhao, Chunhui Article
Monitoring big process data of industrial plants with multiple operating modes based on hadoop
Journal of the Taiwan Institute of Chemical Engineers, v. 91, October 2018, p. 10-21
Zhu, Jinlin; Yao, Yuan; Li, Dewei; Gao, Furong Article
Multimodel fractional predictive functional control design with application on an industrial heating furnace
Industrial & Engineering Chemistry Research, v. 57, (42), October 2018, p. 14182-14190
Hu, Xiaomin; Zou, Hongbo; Tao, Jili; Gao, Furong Article
Nonlinear Monotonically Convergent Iterative Learning Control for Batch Processes
IEEE Transactions on Industrial Electronics, v. 65, (7), July 2018, p. 5826-5836
Lu, Jingyi; Cao, Zhixing; Zhang, Ridong; Gao, Furong Article
Review and big data perspectives on robust data mining approaches for industrial process modeling with outliers and missing data
Annual Reviews in Control, v. 46, October 2018, p. 107-133
Zhu, Jinlin; Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Robust Iterative Learning Control for Multi-phase Batch Processes: An Average Dwell-time Method with 2D Convergence Indexes
International Journal of Systems Science, v. 49, (2), January 2018, p. 324-343
Wang, Limin; Shen, Yiteng; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong Article
Similar batch process monitoring with orthogonal subspace alignment
IEEE Transactions on Industrial Electronics, v. 65, (10), 2018, p. 8173-8183
Zhu, Jinlin; Gao, Furong Article
Transfer of Qualitative and Quantitative Knowledge for Similar Batch Process Monitoring
IEEE Access, v. 6, 2018, article number 8555549, p. 73856-73870
Zhu, Jinlin; Yao, Yuan; Gao, Furong Article
Two-directional concurrent strategy of mode identification and sequential phase division for multimode and multiphase batch process monitoring with uneven lengths
Chemical Engineering Science, v. 178, March 2018, p. 104-117
Zhang, Shumei; Zhao, Chunhui; Gao, Furong Article
半间歇化学反应过程的二维迭代学习PI控制方法
高校化学工程学报=Journal of Chemical Engineering of Chinese Universities, v. 32, (6), December 2018, p. 1403-1411
杨磊; 薄翠梅; 李俊; 金万勤; 高福荣 Article
A Tube Feedback Iterative Learning Control for Batch Processes
10th IFAC Symposium on Advanced Control of Chemical Processes (ADCHEM), v. 51, (18), July 2018, p. 785-790
Lu, Jingyi; Cao, Zhixing; Zhang, Ridong; Bo, Cuimei; Gao, Furong Conference paper

2017 28

2D Multi-model General Predictive Iterative Learning Control for Semi-batch Reactor with Multiple Reactions
Journal of Central South University, v.24, (11), November 2017, p. 2613-2623
Bo, Cuimei; Yang, Lei; Huang, Qingqing; Li, Jun; Gao, Fu Rong Article
A Sparse Dissimilarity Analysis Algorithm for Incipient Fault Isolation with No Priori Fault Information
Control Engineering Practice, v. 65, August 2017, p. 70-82
Zhao, Chunhui; Gao, Furong Article
A Sparse Reconstruction Strategy for Online Fault Diagnosis in Nonstationary Processes with No a Priori Fault Information
Industrial and Engineering Chemistry Research, v. 56, (24), June 2017, p. 6993-7008
Sun, He; Zhang, Shumei; Zhao, Chunhui; Gao, Furong Article
An improved approach for H-infinity design of linear quadratic tracking control for chemical processes with partial actuator failure
Journal of Process Control, v. 58, October 2017, p. 63-72
Zhang, Ridong; Gao, Furong; Christofides, Panagiotis D. Article
An Indirect Data-Driven Method for Trajectory Tracking Control of a Class of Nonlinear Discrete-Time Systems
IEEE Transactions on Industrial Electronics, v. 64, (5), May 2017, article number 2617830, p. 4121-4129
Wang, Zhuo; Lu, Renquan; Gao, Furong; Liu, Derong Article
Critical-to-Fault-Degradation Variable Analysis and Direction Extraction for Online Fault Prognostic
IEEE Transactions on Control Systems Technology, v. 25, (3), May 2017, p. 842-854
Zhao, Chunhui; Gao, Furong Article
Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace
Journal of Process Control, v. 56, August 2017, p. 13-22
Zhang, Ridong; Zou, Qin; Cao, Zhixing; Gao, Furong Article
Fractional Order MPC Design Using Improved State Space Model
IFAC-PapersOnLine, v. 50, (1), July 2017, p. 7535-7540
Zou, Qin; Zhang, Junfeng; Zhang, Ridong; Gao, Furong; Xue, Anke Article
Fuzzy Iterative Learning Control for Batch Processes with Interval Time-Varying Delays
Industrial and Engineering Chemistry Research, v. 56, (14), April 2017, p. 3993-4001
Wang, Limin; Zhu, Chengjie; Yu, Jingxian; Ping, Li; Zhang, Ridong; Gao, Furong Article
Improved Design of Constrained Model Predictive Tracking Control for Batch Processes Against Unknown Uncertainties
ISA Transactions, v. 69, July 2017, p. 273-280
Wu, Sheng; Jin, Qibing; Zhang, Ridong; Zhang, Junfeng; Gao, Furong Article
Iterative Learning and Extremum Seeking for Repetitive Time-Varying Mappings
IEEE Transactions on Automatic Control, v. 62, (7), July 2017, article number 7762820, p. 3339-3353
Cao, Zhixing; Duerr, Hans-Bernd; Ebenbauer, Christian; Allgoewer, Frank; Gao, Furong Article
Iterative Learning Fault-tolerant Control for Injection Molding Processes Against Actuator Faults
Journal of Process Control, v. 59, November 2017, p. 59-72
Wang, Limin; Liu, Fanfan; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong Article
Iterative Learning Fault-Tolerant Control for Networked Batch Processes with Multirate Sampling and Quantization Effects
Industrial & Engineering Chemistry Research, v. 56, (9), 8 March 2017, p. 2515-2525
Gao, Ming; Sheng, Li; Zhou, Donghua; Gao, Furong Article
LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System
Industrial and Engineering Chemistry Research, v. 56, (51), December 2017, p. 15102-15111
Fang, Tao; Zhang, Ridong; Gao, Furong Article
Multimode and Multiphase Batch Processes Understanding and Monitoring Based on Between-Mode Similarity Evaluation and Multimode Discriminative Information Analysis
Industrial and Engineering Chemistry Research, v. 56, (34), 30 August 2017, p. 9679-9690
Qin, Yan; Zhao, Chunhui; Zhang, Shumei; Gao, Furong Article
Observer Based Battery SOC Estimation: Using Multi-gain-switching Approach
Applied Energy, v.204, Oct 2017, p. 1275-1283
Tang, Xiaopeng; Liu, Boyang; Lv, Zhou; Gao, F. Article
Online Average-based System Modelling Method for Batch Process
COMPUTERS & CHEMICAL ENGINEERING, v.108, January 2017, p. 128-138
Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong Article
Robust Iterative Learning Fault-Tolerant Control for Multiphase Batch Processes with Uncertainties
Industrial and Engineering Chemistry Research, v. 56, (36), September 2017, p. 10099-10109
Wang, Limin; Sun, Limei; Yu, Jingxian; Zhang, Ridong; Gao, Furong Article
State Space Model Predictive Control for Advanced Process Operation: A Review of Recent Development, New Results, and Insight
Industrial and Engineering Chemistry Research, v. 56, (18), May 2017, p. 5360-5394
Zhang, Ridong; Wu, Sheng; Gao, Furong Article
Subspace Decomposition and Critical Phase Selection Based Cumulative Quality Analysis for Multiphase Batch Processes
Chemical Engineering Science, v. 166, July 2017, p. 130-143
Qin, Yan; Zhao, Chunhui; Wang, Xuezhong; Gao, Furong Article
基于T-S模糊模型的間歇過程的迭代學習容錯控制
化工學報=CIESC Journal, v. 68, (3), March 2017, p. 1081-1089
王立敏; 楊繼勝; 于晶賢; 李秉蕓; 高福榮 Article
批次过程控制-回顾与展望
自动化学报=Acta Automatica Sinica, v. 43, (6), June 2017, p. 933-943
卢静宜; 曹志兴; 高福荣 Article
A Multi-objective Model Predictive Control for Temperature Control in Extrusion Processes
2017 6th International Symposium on Advanced Control of Industrial Processes, AdCONIP 2017, July 2017, article number 7983751, p. 31-36
Lu, Jingyi; Zhang, Ridong; Yao, Ke; Gao, Furong Conference paper
A Reconstruction Strategy for Fault Diagnosis Based on Fault Direction
Chinese Control Conference, CCC, 2017, article number 8028061, p. 4464-4469
Sun, He; Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
Phase-based Recursive Regression For Quality Prediction of Multiphase Batch Processes
IEEE International Conference on Control and Automation, August 2017, article number 8003074, p. 283-288
Zhao, Luping; Wang, Fuli; Chang, Yuqing; Wang, Shu; Gao, Furong Conference paper
Sparse Dissimilarity Analysis Based on Distribution Dissimilarity Decomposition for Online Diagnosis of Incipient Faults
Proceedings of the American Control Conference, June 2017, article number 7963799, p. 5430-5435
Zhao, Chunhui; Wang, Wei; Gao, Furong Conference paper
State of Charge Estimation of LiFePO₄ Battery Based on a Gain-classifier Observer
Energy Procedia, v. 105, May 2017, p. 2071-2076
Tang, Xiaopeng; Liu, Boyang; Gao, Furong Conference paper
Subspace decomposition based cumulative quality analysis for multiphase batch processes
2017 6th International Symposium on Advanced Control of Industrial Processes, AdCONIP 2017, July 2017, article number 7983762, p. 95-100
Qin, Yan; Zhao, Chunhui; Gao, Furong Conference paper

2016 25

A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace
Industrial and Engineering Chemistry Research, v. 55, (22), June 2016, p. 6465-6474
Zhang, Ridong; Tao, Jili; Gao, Furong Article
Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems
IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 46, (3), March 2016, article number 7151836, p. 326-333
Wang, Zhuo; Gao, Furong Article
An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring
AIChE Journal, v. 62, (7), July 2016, p. 2358-2373
Qin, Yan; Zhao, Chunhui; Gao, Furong Article
Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes
IEEE Transactions on Automatic Control, v. 61, (1), January 2016, article number 7109128, p. 270-275
Cao, Zhixing; Zhang, Ridong; Yang, Yi; Lu, Jingyi; Gao, Furong Article
Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints
IET Control Theory and Applications, v. 10, (9), June 2016, p. 1018-1026
Lu, Jingyi; Cao, Zhixing; Gao, Furong Article
Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis
IEEE Transactions on Control Systems Technology, v. 24, (3), May 2016, article number 7295568, p. 928-939
Zhao, Chunhui; Gao, Furong Article
Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes
Industrial and Engineering Chemistry Research, v. 55, (6), February 2016, p. 1598-1608
Yang, Yi; Cao, Wanlin; Cao, ZhiKai; Zhou, Hua; Gao, Furong; Shi, Jia Article
Iterative Learning Kalman Filter for Repetitive Processes
Journal of Process Control, v. 46, October 2016, p. 92-104
Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong Article
New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes
IEEE Transactions on Automatic Control, v. 61, (10), 2016, article number 7339434, p. 3045-3051
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong Article
Online identification for batch processes in closed loop incorporating priori controller knowledge
Computers and Chemical Engineering, v. 90, July 2016, p. 222-233
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong Article
Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches
Chemometrics and Intelligent Laboratory Systems, v. 156, 2016, p. 81-88
Zheng, Junhua; Ge, Zhigiang; Song, Zhihuan; Gao, Furong Article
Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection
Chemometrics and Intelligent Laboratory Systems, v. 158, November 2016, p. 69-79
Guo, Shuo; Yuan, Decheng; Zhang, Ridong; Gao, Furong Article
Priori Knowledge-Based Online Batch-to-Batch Identification in a Closed Loop and an Application to Injection Molding
Industrial and Engineering Chemistry Research, v. 55, (32), August 2016, p. 8818-8829
Cao, Zhixing; Yang, Yi; Yi, Hui; Gao, Furong Article
Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes
Industrial & Engineering Chemistry Research, v. 55, (50), December 2016, p. 12896-12908
Zhao, Chunhui; Wang, Wei; Gao, Furong Article
State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer
Energies, v. 9, (9), September 2016, article number 675
Tang, Xiaopeng; Liu, Boyang; Gao, Furong; Lv, Zhou Article
Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity
Industrial & Engineering Chemistry Research, v. 55, (51), Dec 2016, p. 13074-13084
Li, Dewei; Xi, Yugeng; Lu, Jingyi; Gao, Furong Article
The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis
International Journal of Control, v. 90, (12), December 2017, p. 2721-2733
Li, Dewei; Li, Jiwei; Xi, Yugeng; Gao, Furong Article
Two-time dimensional recursive system identification incorporating priori pole and zero knowledge
Journal of Process Control, v. 39, March 2016, p. 100-110
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong Article
注塑過程中注射保壓階段最小運行時間控制方法
工程塑料應用=Engineering Plastics Application, v. 44, (4), April 2016, p. 53-56
王立敏; 朱城杰; 于晶賢; 高福榮 Article
集成神经网络与自适应算法的分数阶滑模控制
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v. 33, (10), 2016, p. 1373-1377
张碧陶; 高福荣; 姚科 Article
Injection Molding Process Control, Monitoring, and Optimization
Injection Molding Process Control, Monitoring, and Optimization / by Yi Yang, Xi Chen, Ningyun Lu and Furong Gao. Munich: Carl Hanser Verlag GmbH & Co. KG, 2016. Book series: Progress in Polymer Processing.
Yang, Yi; Chen, Xi; Lu, Ningyun; Gao, Furong Book
间歇过程的过程建模与参数控制
间歇过程的过程建模与参数控制 / 高福荣 著. 北京: 科学出版社, 2016.
高福荣 Book
‘State Déjà vu’ Inter-Agent Learning Adaptive Control Framework
IFAC-PapersOnLine, v. 49, (7), June 2016, p. 984-989
Qu, Hongyi; Zhang, Ridong; Gao, Furong Conference paper
Product Quality Control for Single Screw Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, 2016, p. 870-875
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Lu, Ningyun; Gao, Furong Conference paper
Stability Evaluation based Non-steady Variable Identification for Online Fault Prognosis
IFAC-PapersOnLine, v. 49, (7), 9 August 2016, p. 699-704
Zhao, C.H.; Wang, Weii; Gao, Furong Conference paper

2015 27

A nested-loop Fisher discriminant analysis algorithm
Chemometrics and Intelligent Laboratory Systems, v. 146, July 2015, p. 396-406
Zhao, Chunhui; Gao, Furong Article
A two-stage design of two-dimensional model predictive iterative learning control for nonrepetitive disturbance attenuation
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5683-5689
Lu, Jingyi; Cao, Zhixing; Wang, Zhuo; Gao, Furong Article
An improved decoupling structure based state space MPC design with improved performance
Systems and Control Letters, v. 75, 2015, p. 77-83
Zhang, Ridong; Gao, Furong Article
An Iterative Modeling and Trust-Region Optimization Method for Batch Processes
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3186-3199
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong Article
Application of Two-Dimensional Predictive Functional Control in Injection Molding
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10088-10102
Yang, Bo; Xu, Zuhua; Yang, Yi; Gao, Furong Article
Bayesian improved model migration methodology for fast process modeling by incorporating prior information
Chemical Engineering Science, v. 134, September 2015, p. 23-35
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3154-3166
Zhao, Chunhui; Wang, Wei; Qin, Yan; Gao, Furong Article
Cost-effective process modeling and optimization methodology assisted by robust migration techniques
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5736-5748
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Delay-range dependent H∞control for uncertain 2D-delayed systems
Numerical Algebra, Control and Optimization, v. 5, (1), 2015, p. 11-23
Wang, Li-Min; Yu, Jing-Xian; Shi, Jia; Gao, Furong Article
Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure
Journal of Process Control, v. 26, 2015, p. 102-114
Zhang, Ridong; Jin, Qibing; Gao, Furong Article
Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures
Computers and Chemical Engineering, v. 80, September 2015, p. 130-139
Zhang, Ridong; Gao, Furong Article
Iterative improvement of parameter estimation for model migration by means of sequential experiments
Computers and Chemical Engineering, v. 73, February 2015, p. 128-140
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Online fault prognosis with relative deviation analysis and vector autoregressive modeling
Chemical Engineering Science, v. 138, December 2015, p. 531-543
Zhao, Chunhui; Gao, Furong Article
Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products
Construction and Building Materials, v. 79, March 2015, p. 214-222
Ji, Yong-sheng; Zhan, Guangmei; Tan, Zhongchao; Hu, Yijie; Gao, Furong Article
Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10020-10030
Li, Wenqing; Zhao, Chun-Hui; Gao, Furong Article
State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower
IEEE Transactions on Automation Science and Engineering, v. 12, (4), October 2015, article number 6818446, p. 1516-1524
Zhang, Ridong; Cao, Zhixing; Lu, Renquan; Li, Ping; Gao, Furong Article
Two-time-dimensional model predictive control of weld line positioning in bi-injection molding
Industrial and Engineering Chemistry Research, v. 54, (17), May 2015, p. 4795-4804
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Article
基于时序模型迁移的间歇过程监测建模方法
控制与决策=Control and Decision, v. 30, (10), October 2015, p. 1885-1889
刘昊知; 胥布工; 高福荣 Article
A fast and effective 2D regulatory control for injection molding process
Annual Technical Conference - ANTEC, Conference Proceedings, 2015, p. 2565-2571
Yang, B.; Yang, Y.; Gao, Furong Conference paper
A MPC Operation Method for a Photovoltaic System with Batteries
IFAC-PapersOnLine, v. 48, (8), 2015, p. 807-812
Liu, Bing; Lu, Zhou; Yao, Ke; Gao, Furong Conference paper
A Stable Two-Time Dimensional (2D) Model Predictive Control with Zero Terminal State Constraints for Constrained Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 514-519
Lu, Jingyi; Cao, Zhixing; Gao, Furong Conference paper
A Variant Fisher Discriminant Analysis Algorithm and its Applicationto Fault Diagnosis
2015 10th Asian Control Conference (ASCC 2015), Institute of Electrical and Electronics Engineers (IEEE), 2015
Wang, Wei; Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
An information technology way for uplifting polymer processing efficiency
Polymer Process Engineering '15 - UK China Advanced Material Research Institute (PPE '15 - UK China AMRI), University of Bradford, 8-10 September 2015
Gao, Furong Conference paper
An Information Technology Way for Uplifting Polymer Processing Efficiency
The 12th International Conference of Advanced Molding Technology and Materials Processing (SAMT 2015), Nansha, China, 20-22 November 2015
Gao, Furong Conference paper
Integrated Optimization Based on Transition Tracking Analysis for Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 272-277
Qin, Yan; Zhao, Chunhui; Gao, Furong Conference paper
Model Migration through Bayesian Adjustments
IFAC-PapersOnLine, v. 48, (8), 2015, p. 112-116
Luo, Linkai; Gao, Furong Conference paper
Multi-stage Process Analysis and Modelling based Online Monitoring for Chip Packaging Process
IFAC-PapersOnLine, v. 48, (28), 2015, p. 993-998
Qin, Yan; Zhao, Chunhui; Gao, Furong Conference paper

2014 37

Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction
Industrial and Engineering Chemistry Research, v. 53, (40), October 2014, p. 15629-15638
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems
Chinese Journal of Chemical Engineering, v. 22, (7), July 2014, p. 837-841
Bo, Cuimei; Zhang, Ridong; Zhang, Chenghao; Tang, Jihai; Qiao, Xu; Gao, Furong Article
Constrained two dimensional recursive least squares model identification for batch processes
Journal of Process Control, v. 24, (6), 2014, p. 871-879
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Article
Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace
IET Control Theory and Applications, v. 8, (14), 2014, p. 1303-1311
Zhang, Ridong; Cao, Zhixing; Li, Ping; Gao, Furong Article
Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace
Chemometrics and Intelligent Laboratory Systems, v. 134, May 2014, p. 110-117
Wu, Sheng; Zhang, Ridong; Lu, Renquan; Gao, Furong Article
Fault-relevant Principal Component Analysis (FPCA) method for multivariate statistical modeling and process monitoring
Chemometrics and Intelligent Laboratory Systems, v. 133, April 2014, p. 1-16
Zhao, Chun Hui; Gao, Furong Article
GA based predictive functional control for batch processes under actuator faults
Chemometrics and Intelligent Laboratory Systems, v. 137, October 2014, p. 67-73
Zhang, Ridong; Zou, Hongbo; Xue, Anke; Gao, Furong Article
Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower
Journal of Process Control, v. 24, (3), March 2014, p. 125-132
Zhang, Ridong; Wu, Sheng; Gao, Furong Article
Inter-batch-evolution-traced process monitoring based on inter-batch mode division for multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 138, December 2014, p. 178-192
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
New PID Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3283-3292
Zhang, Ridong; Cao, Zhixing; Bo, Cuimei; Li, Ping; Gao, Furong Article
Predictive control optimization based PID control for temperature in an industrial surfactant reactor
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 48-62
Zhang, Ridong; Wu, Sheng; Lu, Renquan; Gao, Furong Article
Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process
Industrial and Engineering Chemistry Research, v. 53, (2), January 2014, p. 723-731
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong Article
Real-time implementation of improved state-space MPC for air supply in a coke furnace
IEEE Transactions on Industrial Electronics, v. 61, (7), 2014, article number 6616639, p. 3532-3539
Zhang, Ridong; Xue, Anke; Lu, Renquan; Li, Ping; Gao, Furong Article
Regression modeling and quality prediction for multiphase batch processes with inner-phase analysis
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 1-16
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Separated design of robust model predictive control for LPV systems with periodic disturbance
Journal of Process Control, v. 24, (1), January 2014, p. 250-260
Li, Dewei; Gao, Furong; Xi, Yugeng Article
State space model predictive fault-tolerant control for batch processes with partial actuator failure
Journal of Process Control, v. 24, (5), 2014, p. 613-620
Zhang, Ridong; Lu, Jingyi; Qu, Hongyi; Gao, Furong Article
Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 58-67
Zhao, Chunhui; Gao, Furong Article
Temperature control of industrial coke furnace using novel state space model predictive control
IEEE Transactions on Industrial Informatics, v. 10, (4), November 2014, article number 6881729, p. 2084-2092
Zhang, Ridong; Xue, Anke; Gao, Furong Article
Temperature Modeling in a Coke Furnace with an Improved RNA-GA Based RBF Network
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3236-3245
Zhang, Ridong; Tao, Jili; Gao, Furong Article
Two-level PLS model for quality prediction of multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 29-36
Ge, Zhiqiang; Song, Zhihuan; Zhao, Luping; Gao, Furong Article
A Fast 2D Predictive Control Algorithm for Injection Molding process
Asian Workshop on Polymer Processing 2014, Kenting, Taiwan, 17-20 November 2014
Yang, Bo; Yang, Yi; Gao, Furong Conference paper
A Repetitiveness Index-based Adaptive Two Dimensional Iterative Learning Model Predictive Control
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 19, 2014, p. 3092-3097
Lu, Jingyi; Cao, Zhixing; Gao, Furong Conference paper
A Two-Dimensional Iterative Learning Model Predictive Control Method for Injection Molding Based on Mixed Integer Quadratic Programming
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2311-2316
Cao, Zhixing; Lu, Jingyi; Gao, Furong Conference paper
Batch process control: from continuous approaches to 2D methods
2014 Workshop on Learning Control, Qingdao, China, 25-27 April 2014
Gao, Furong; Mo, Shengyong; Yang, Yi; Yao, Ke Conference paper
Batch Process Control: from continuous approaches to 2-time dimensional control
The 25th Chinese Process Control Conference (CPCC), Dalian, China, 9-11 August 2014
Gao, Furong Conference paper
Control in Polymer Processing for Key Processes and Their Peripherals
The 11th SAMT Annual Conference, Dalian, China, 23-25 July 2014
Gao, Furong; Yang, Yi Conference paper
Delay-range-dependent Robust BIBO Stabilization of 2D Discrete Delayed Systems Via LMI Approach
IFAC Proceedings Volumes, v. 19, 2014, p. 10994-10999
Wang, Limin; Chen, Xi; Gao, Furong Conference paper
Development of a Capacitive Transducer for Dimensions Prediction in Polymer Extrusion
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, January 2014, p. 2259-2264
Cheng, Yu; Fung, Ka Tsai; Gao, Furong Conference paper
Energy-Saving Based Allocated Generalized Predictive Control (AGPC) in Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), January 2014, p. 2265-2270
Gao, Furong; Jiang, Zhijiang; Mo, Shengyong; Yang, Yi Conference paper
From Single Batch Process Control to Multiple Batch Processes Control: A Review and a Perspective for Injection Molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2271-2276
Cao, Zhixin; Gao, Furong; Lu, Jingyi; Yang, Yi Conference paper
Intra-Batch Evolution Based Process Monitoring for Multiphase Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 47, (3), 2014, p. 6680-6685
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
Iterative Optimization for Batch Processes Through Online Modelling
IFAC Proceedings Volumes, v. 19, 2014, p. 10455-10450
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong Conference paper
Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model
2014 Seventh International Symposium on Computational Intelligence and Design (ISCID 2014), Institute of Electrical and Electronics Engineers (IEEE), 2014, p. 399-402
Liu, Haozhi; Xu, Bugong; Gao, Furong Conference paper
Monitoring of Polymer Processing Processes and Technology
2014 Asian Workshop on Polymer Processing (2014 AWPP), Kenting, Taiwan, 17-21 November 2014
Gao, Furong Conference paper
Two Dimensional Predictive Functional Control for Injection Molding Process
Society of Plastics Engineering, ANTEC 2014, v. 3, (January), 2014, p. 2305-2310
Yang, Bo; Yang, Yi; Shi, Jia; Gao, Furong Conference paper
Two-Time Dimensional Hybrid Dynamic Matrix Control for Injection Molding Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2317-2322
Mo, Shengyong; Jiang, Zhijun; Yang, Yi; Gao, Furong Conference paper
注塑机控制的智能化发展
CAE Molding Solution Alliance Conference 2014, Dongguan, 20-21 March 2014
Gao, Furong Conference paper

2013 32

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes
Chinese Journal of Chemical Engineering, v. 21, (4), April 2013, p. 401-411
Wang, Limin; Chen, Xi; Gao, Furong Article
Between‐phase calibration modeling and transition analysis for phase‐based quality interpretation and prediction
AIChE Journal, v. 59, (1), January 2013, p. 108-119
Zhao, Chunhui; Gao, Furong; Sun, Youxian Article
Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System
Industrial and Engineering Chemistry Research, v. 52, (49), December 2013, p. 17465-17474
Bo, Cuimei; Tang, Jihai; Cui, Mifen; Feng, Kangkang; Qiao, Xu; Gao, Furong Article
Delay-range-dependent guaranteed cost control for batch processes with state delay
AIChE Journal, v. 59, (6), June 2013, p. 2033-2045
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (7), February 2013, p. 2661-2671
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties
Journal of Process Control, v. 23, (5), June 2013, p. 715-730
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays
Control Engineering Practice, v. 21, (10), October 2013, p. 1321-1333
Wang, Limin; Mo, Shengyong; Qu, Hongyi; Zhou, Donghua; Gao, Furong Article
Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes
AIChE Journal, v. 59, (3), March 2013, p. 772-779
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (15), April 2013, p. 5507-5511
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong; Wang, Peiliang Article
Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (12), March 2013, p. 4586-4596
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Multiset Independent Component Regression (MsICR) Based Statistical Data Analysis and Calibration Modeling
Industrial and Engineering Chemistry Research, v. 52, (8), 2013, p. 2917-2924
Zhao, Chunhui; Gao, Furong Article
Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace
Chemical Engineering Science, v. 94, May 2013, p. 30-43
Zhang, Ridong; Gao, Furong Article
New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure
Industrial and Engineering Chemistry Research, v. 52, (46), November 2013, p. 16294-16300
Zhang, Ridong; Gan, Liangzhi; Lu, Jingyi; Gao, Furong Article
Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (18), May 2013, p. 6182-6192
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong Article
Review of Recent Research on Data-Based Process Monitoring
Industrial and Engineering Chemistry Research, v. 52, (10), March 2013, p. 3543-3562
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 979-984
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 817-829
Zhang, Ridong; Gao, Furong Article
Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (41), October 2013, p. 14613-14626
Zhao, Chunhui; Gao, Furong Article
Synthesis of Dynamic Output Feedback RMPC with Saturated Inputs
Automatica, v. 49, (4), April 2013, p. 949-954
Li, Dewei; Xi, Yugeng; Gao, Furong Article
Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions
Journal of Environmental Engineering (United States), v. 139, (7), July 2013, p. 1004-1016
Qin, Xusong; Yang, Bin; Gao, Furong; Chen, Guohua Article
基于2維性能參考模型的2維模型預測迭代學習控制策略
自動化學報. =Acta Automatica Sinica, v. 39, (5), May 2013, p. 565-573
師佳; 江青茵; 曹志凱; 周華; 高福榮 Article
迭代学习控制的二维模型理论及其应用
迭代学习控制的二维模型理论及其应用 / 王友清，周东华，高福荣. 北京: 科学出版社, 2013
王友清; 周东华; 高福荣 Book
Feedback Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Editor: Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 313-337
Yang, Yi; Gao, Furong Book chapter
A PID-type Model Predictive Iterative Learning Control for Injection Molding Process
Society of Plastics Engineers, Annual Technical Conference, ANTEC 2013, Cincinnati, Ohio, USA, April 21-24 2013, p. 2229-2234
Shi, Jia; Yang, Yi; Gao, Furong Conference paper
From One Dimensional to Two Dimensional Hybrid Control of Injection Molding Process
9th World Congress of Chemical Engineering, Seoul, Korea, 18-23 August 2013
Gao, Furong; Yang, Yi; Mo, Shengyong Conference paper
Injection Molding: From Single Machine to Plant-Wide Intelligent Control
The 13th Pacific Polymer Conference (PPC 13), Kaohsiung, Taiwan, 17-22 November 2013
Gao, Furong Conference paper
Inner-Phase-Evolution-Traced Statistical Modeling and Online Monitoring for Uneven Batch Processes
IEEE International Conference on Control and Automation, 2013, article number 6564919, p. 294-299
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
New Approaches of 2D Recursive Least Squares System Identification for Batch Processes
ANTEC 2013 - Proceedings of the Technical Conference & Exhibition, Society of Plastics Engineers, 2013, p. 443-448
Cao, Zhixing; Yang, Yi; Gao, Furong Conference paper
Quality-related Inner-phase Evolution Analysis and Quality Prediction for Uneven Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 10, (PART 1), 2013, p. 517-522
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
Quality-relevant Fault Diagnosis with Concurrent Phase Partition and Analysis of Relative Changes for Multiphase Batch Processes
24th China Process Control Conference
Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
Rejection of Periodic Disturbances Based on Adaptive Repetitive Model Predictive Control
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 768-773
Lu, Jingyi; Li, Dewei; Cao, Zhixing; Gao, Furong Conference paper
Two Dimensional Recursive Least Squares for Batch Processes System Identification
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 780-784
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Conference paper

2012 43

4th Symposium on advanced control of industrial processes (Adconip)
Asia-Pacific Journal of Chemical Engineering, v. 7, (5), 2012, Sep, p. 633-634
Xie, Lei; Gao, Furong; Huang, Biao Article
A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis
Industrial and Engineering Chemistry Research, v. 51, (34), 2012, Aug, p. 11207-11217
Zhao, Chunhui; Sun, Youxian; Gao, Furong Article
Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes
AIChE journal, v. 58, (9), September 2012, p. 2682-2696
Zhao, Chunhui; Gao, Furong Article
Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes
Acta Automatica Sinica, v.39, (5), 2013, p. 487-493
Zhao, Chun-Hui; Li, Wen-Qing; Sun, You-Xian; Gao, Fu-Rong Article
Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations
The Canadian journal of chemical engineering, v. 90, (6), December 2012, p. 1383-1392
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong Article
Nonlinear quality prediction for multiphase batch processes
AIChE journal, v. 58, (6), June 2012, p. 1778-1787
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Overall Control System for Injection Molding Process
International polymer processing, v. 27, (1), March 2012, p. 40-59
Yang, Yi; Yao, K.; Gao, Furong Article
Partially Decoupled Approach of Extended Non-minimal State Space Predictive Functional Control for MIMO Processes
Journal of process control, v. 22, (5), June 2012, p. 837-851
Zhang, Ridong; Xue, Anke; Wang, Shuding; Zhang, Jianming; Gao, Furong Article
Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model
Chinese Journal of Chemical Engineering, v. 20, (6), 2012, Dec, p. 1121-1127
Dong, Weiwei; Yao, Yuan; Gao, Furong Article
Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes
23rd Chinese Process Control Conference (CPCC), Chinese Journal of Chemical Engineering, Xiamen, China, v.20, (6), 2012, Dec, p. 1191-1197
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Polymer Extrusion: From Control System Design to Product Quality
Industrial & engineering chemistry research, v. 51, (45), November 2012, p. 14759-14770
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Yao, Ke; Gao, Furong Article
Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures
Journal of process control, v. 22, (7), August 2012, p. 1273-1286
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction
AIChE journal, v. 58, (2), 2012, p. 466-479
Zhao, Chunhui; Gao, Furong Article
Statistical modeling and online monitoring based on between-set regression analysis
Industrial and Engineering Chemistry Research, v. 51, (25), 2012, June, p. 8495-8509
Zhao, Chunhui; Gao, Furong; Sun, Youxian Article
Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data
Industrial & engineering chemistry research, v. 51, (35), September 2012, p. 11409-11416
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Two-step multiset regression analysis (MsRA) algorithm
Industrial & engineering chemistry research, v. 51, (3), 2012, p. 1337-1354
Zhao, Chunhui; Gao, Furong Article
Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty
Journal of process control, v. 22, (5), June 2012, p. 899-914
Mo, Shengyong; Wang, Limin; Yao, Yuan; Gao, Furong Article
Utilizing transition information in online quality prediction of multiphase batch processes
Journal of process control, v. 22, (3), 2012, p. 599-611
Ge, Zhiqiang; Zhao, Luping; Yao, Yuan; Song, Zhihuan; Gao, Furong Article
Wastewater Quality Monitoring System Using Sensor Fusion and Machine Learning Techniques
Water Research, v. 46, (4), 2012, p. 1133-1144
Qin, Xusong; Gao, Furong; Chen, Guohua Article
Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods
Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods / Tao Liu, Furong Gao. London; New York : Springer, c2012
Liu, Tao; Gao, Furong Book
Batch process control
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 12, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Cascade control system
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 321-347, Ch. 9, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Concluding Remarks
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 453-456, Ch. 13, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Control of single-input-single-output (SISO) processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 7, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Decoupling control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 369-431, Ch. 11, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Direct Quality Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 377-390
Yang, Yi; Gao, Furong Book chapter
Learning Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 339-353
Yang, Yi; Gao, Furong Book chapter
Multiloop control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 349-368, Ch. 10, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Multivariate Statistical Process Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 335-376
Yao, Yuan; Gao, Furong Book chapter
Relay feedback identification of integrating processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 197-216, Ch. 5, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Relay feedback identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 119-196, Ch. 4, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Relay Feedback Identification of Unstable Processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 217-240, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Step response identification of integrating and unstable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 85-117, Ch. 3, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Step response identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 13-84, Ch. 2, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Two-degrees-of-freedom (2DOF) control of SISO processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 279-319, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Application of Advanced Control Algorithms in Injection Molding
The 28th International Conference of the Polymer Processing Society (PPS-28), Pattaya, Thailand, 11-15 December, 2012
Yang, Yi; Gao, Furong Conference paper
Batch Process Control, From Traditional Approaches to 2D Control
2012 12th International Conference on Control, Automation and Systems, 2012, article number 639323, p. 529-532
Yang, Yi; Mo, Shengyong; Gao, Furong Conference paper
Between-phase transition analysis for phase-based quality prediction
2012 24th Chinese Control and Decision Conference (CCDC), Taiyuan, China, 23-25 May 2012
Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
Injection velocity control using 2D model predictive iterative learning algorithm
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2155-2160
Yang, Yi; Shi, Jia; Gao, Furong Conference paper
Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring
2012 SAMT International Conference, Hangzhou, 22-24 August, 2012
Yang, Yi; Gao, Furong Conference paper
Multivariate statistical analysis methods to investigate interindividual glucose dynamics for subjects with type 1 diabetes mellitus
Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Beijing, China, 2012, Article number 6359424, p. 4989-4994
Zhao, Chun Hui; Sun, Youxian; Gao, Furong Conference paper
Polymer extrusion control system design
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2187-2196
Jiang, Zhijun; Yan, Yongze; Gao, Furong Conference paper
Robust iterative learning control with quadratic performance index
Industrial & engineering chemistry research, v. 51, (2), 2012, p. 872-881
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong Conference paper

2011 17

A Bidirectional Between-Set Statistical Analysis Method and Its Applications
AIChE journal, v. 57, (5), May 2011, p. 1233-1249
Zhao, Chunhui; Gao, Furong Article
A two-step basis vector extraction strategy for multiset variable correlation analysis
Chemometrics and intelligent laboratory systems, v. 107, (1), May 2011, p. 147-154
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli Article
Batch process monitoring based on support vector data description method
Journal of process control, v. 21, (6), July 2011, p. 949-959
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
Bayesian migration of Gaussian process regression for rapid process modeling and optimization
Chemical engineering journal, v. 166, (3), February 2011, p. 1095-1103
Yan, Wenjin; Hu, Shuangquan; Yang, Yanhui; Gao, Furong; Chen, Tao Article
Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics
ISA transactions, v. 50, (2), 2011, p. 239-248
Liu, Tao; Gao, Furong Article
Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes
AIChE journal, v. 57, (2), February 2011, p. 388-403
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli Article
Mixture probabilistic PCR model for soft sensing of multimode processes
Chemometrics and intelligent laboratory systems, v. 105, (1), January 2011, p. 91-105
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
Multiphase calibration modeling and quality interpretation by priority sorting
Chemical engineering science, v. 66, (21), November 2011, p. 5400-5409
Zhao, Chunhui; Gao, Furong Article
Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms
Industrial & engineering chemistry research, v. 50, (23), 2011, p. 13427-13434
Wang, Youqing; Tuo, Jianyong; Zhao, Zhong; Gao, Furong Article
Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost
Industrial & engineering chemistry research, v. 50, (5), March 2011, p. 2994-3003
Kong, Xiangsong; Yang, Yi; Chen, Xi; Shao, Zhijiang; Gao, Furong Article
Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays
Journal of process control, v. 21, (7), August 2011, p. 987-996
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong Article
Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy
AIChE journal, v. 57, (5), May 2011, p. 1202-1215
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Statistical analysis and online monitoring for handling multiphase batch processes with varying durations
Journal of process control, v. 21, (6), July 2011, p. 817-829
Zhao, Chunhui; Mo, Shengyong; Gao, Furong; Lu, Ningyun; Yao, Yuan Article
Two-dimensional Bayesian monitoring method for nonlinear multimode processes
Chemical engineering science, v. 66, (21), November 2011, p. 5173-5183
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
GPC control of hot-runner temperature in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2011, p. 2426-2430
Zhou, Feng; Yang, Yi; Gao, Furong Conference paper
Improved two-dimensional dynamic batch process monitoring with support vector data description
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 18, (PART 1), 2011, p. 13133-13138
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Conference paper
Multivariate statistical monitoring of multiphase batch processes with uneven operation durations
2011 4th International Symposium on Advanced Control of Industrial Processes, ADCONIP 2011, Hangzhou, China, 2011, p. 54-59
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong Conference paper

2010 29

A frequency domain step response identification method for continuous-time processes with time delay
Journal of process control, v. 20, (7), 2010, AUG, p. 800-809
Liu, Tao; Gao, Furong Article
A novel mechatronic design of a 3D laser scanning system
International journal of advanced mechatronic systems, v. 2, (1-2), 2010, p. 124-131
Ma, Zi; Wang, Yang; Li, Aiguo; Gao, Furong; Zhu, Quanmin Article
A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data
AIChE journal, v. 56, (1), 2010, JAN, p. 196-206
Zhao, Chunhui; Gao, Furong; Yao, Yuan; Wang, Fuli Article
An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure
AIChE journal, v. 56, (6), 2010, JUN, p. 1519-1535
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Automatic Velocity Profile Determination for Uniform Filling in Injection Molding
Polymer engineering and science, v. 50, (7), 2010, JUL, p. 1358-1371
Chen, Xi; Zhang, Lei; Kong, Xiangsong; Lu, Junde; Gao, Furong Article
Closed-loop step response identification of integrating and unstable processes
Chemical engineering science, v. 65, (10), 2010, MAY 15, p. 2884-2895
Liu, Tao; Gao, Furong Article
Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution
Journal of Applied Electrochemistry, v. 40, (10), 2010, OCT, p. 1797-1805
Qin, Xusong; Gao, Furong; Chen, Guohua Article
IMC-based iterative learning control for batch processes with uncertain time delay
Journal of process control, v. 20, (1), 2010, JAN, p. 173-180
Liu, Tao; Gao, Furong; Wang, Youqing Article
Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis
Industrial & engineering chemistry research, v. 49, (18), 2010, SEP 15, p. 8694-8704
Zhao, Chunhui; Gao, Furong Article
Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem
Control engineering practice, v. 18, (1), 2010, JAN, p. 67-76
Xue, Yali; Li, Donghai; Gao, Furong Article
Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information
Journal of Process Control, v. 20, (10), 2010, p. 1188-1197
Yao, Yuan; Chen, Tao; Gao, Furong Article
New insight into internal model control filter design for load disturbance rejection
IET CONTROL THEORY AND APPLICATIONS, v. 4, (3), 2010, MAR, p. 448-460
Liu, Tao; Gao, Furong Article
Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring
Industrial & engineering chemistry research, v. 49, (2), 2010, JAN 20, p. 669-681
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties
Chemical Engineering Science, v. 65, (23), 2010, p. 6134-6144
Liu, Tao; Gao, Furong Article
Statistical analysis and online monitoring for multimode processes with between-mode transitions
Chemical engineering science, v. 65, (22), 2010, NOV 15, p. 5961-5975
Zhao, Chunhui; Yao, Yuan; Gao, Furong; Wang, Fuli Article
Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information
Industrial & engineering chemistry research, v. 49, (20), 2010, OCT 20, p. 9961-9969
Yao, Yuan; Gao, Furong Article
Step response identification under inherent-type load disturbance with application to injection molding
Industrial and Engineering Chemistry Research, v. 49, (22), 2010, p. 11572-11581
Liu, Tao; Zhou, Feng; Yang, Yi; Gao, Furong Article
基于时段的间歇过程统计建模、在线监测及质量预报
自动化学报=Acta Automatica Sinica, v. 36, (3), March 2010, p. 366-374
趙春暉; 王福利; 姚遠; 高福榮 Article
Advanced Process Identification and Control
Advanced Process Identification and Control / Springer, 2010, 13 chapters
Liu, Tao; Gao, Furong Book
Control System for Injection Molding Process
7th International Conference on Advanced Molding and Materials Processing Technology, Wuhan, China, Vol. 1, pp. 113-133, Sept 10-12, (2010)
Yang, Yi; Yao, ke; Gao, Furong Conference paper
Design of an advanced injection molding control system
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 553-557
Yang, Y.; Yao, K.; Gao, F. Conference paper
Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 67-72
Liu, Tao; Gao, Furong Conference paper
Extruder Temperature Control Using Multivariable Generalized Predictive Control
7th International Conference on Advanced Molding and Materials Processing Technology, Vol. 1, pp. 106-112, Sept 10-12, (2010)
Jiang, Zhijun; Yang, Yi; Gao, Furong Conference paper
FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, ~ July 4-8, 2010 Banff (Canada)
Yao, ke; Gao, Furong Conference paper
Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 355-360
Zhao, Chunhui; Gao, Furong Conference paper
INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, July 4-8, 2010 Banff (Canada)
Shi, Jia; Yang, Yi; Gao, Furong Conference paper
Injection molding process monitoring and control
2010 先進精密模具設備及檢測, 清雲科技大學，台灣, 9 April, 2010
Gao, Furong Conference paper
On-line in-mold transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 571-575
Yao, Ke; Yang, Yi; Zhou, Feng; Gao, Furong Conference paper
The applications of multivariate statistical methods in injection molding process monitoring
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 565-570
Yao, Yuan; Yang, Yi; Yao, Ke; Gao, Furong Conference paper

2009 27

A generalized relay identification method for time delay and non-minimum phase processes
Automatica, v. 45, (4), 2009, APR, p. 1072-1079
Liu, Tao; Gao, Furong Article
A survey on multistage/multiphase statistical modeling methods for batch processes
Annual reviews in control, v. 33, (2), 2009, DEC, p. 172-183
Yao, Yuan; Gao, Furong Article
Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance
Industrial & engineering chemistry research, v. 48, (24), 2009, DEC 16, p. 11060-11070
Yao, Yuan; Zhao, Chunhui; Gao, Furong Article
Covariance-oriented qualitative and quantitative calibration analysis for multistage batch processes
Canadian Journal of Chemical Engineering, v.87, (3), 2009, Jun, p. 466-476
Zhao, Chunhui; Wang, Fuli; Gao, Furong Article
Generalized predictive control of linear systems with actuator arrearage faults
Journal of process control, v. 19, (5), 2009, MAY, p. 803-815
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Identification and Autotuning of Temperature-Control System With Application to Injection Molding
IEEE transactions on control systems technology, v. 17, (6), 2009, NOV, p. 1282-1294
Liu, Tao; Yao, Ke; Gao, Furong Article
Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction
Chemometrics and intelligent laboratory systems, v. 95, (2), 2009, FEB 15, p. 107-121
Zhao, Chunhui; Wang, Fuh; Gao, Furong Article
In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding
International polymer processing, v. 24, (3), 2009, JUL, p. 253-260
Zhou, Feng; Yao, Ke; Chen, Xiaohong; Gao, Furong Article
Model Migration for Development of a New Process Model
Industrial & engineering chemistry research, v. 48, (21), 2009, NOV 4, p. 9603-9610
Lu, Junde; Yao, Yuan; Gao, Furong Article
Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes
Journal of process control, v. 19, (10), 2009, DEC, p. 1716-1724
Yao, Yuan; Gao, Furong Article
Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)
Industrial & engineering chemistry research, v. 48, (20), 2009, OCT 21, p. 9163-9174
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Phase and transition based batch process modeling and online monitoring
Journal of process control, v. 19, (5), 2009, MAY, p. 816-826
Yao, Yuan; Gao, Furong Article
Process Similarity and Developing New Process Models Through Migration
AIChE journal, v. 55, (9), 2009, SEP, p. 2318-2328
Lu, Junde; Yao, Ke; Gao, Furong Article
Survey on iterative learning control, repetitive control, and run-to-run control
Journal of process control, v. 19, (10), 2009, DEC, p. 1589-1600
Wang, Youqing; Gao, Furong; Doyle, III, Francis J. Article
Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region
Industrial & engineering chemistry research, v. 48, (2), 2009, JAN 21, p. 837-843
Yao, Yuan; Diao, Yinghu; Lu, Ningyun; Lu, Junde; Gao, Furong Article
Injection Molding Control
Injection molding: technology and fundamentals / Edited by Musa R. Kamal, AvramI. Isayev, Shih-Jung Liu. Munich : Hanser, 2009, p. 0-926
Gao, Furong; Yang, Yi Book chapter
A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 1746-1751
Shi, Jia; Gao, Furong; Jiang, Qingying; Cao, Zikai Conference paper
An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 893-898
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli Conference paper
Batch process control from practice to 2D model predictive control
2009 Chinese Control and Decision Conference, CCDC 2009, 2009
Yao, Ke; Yang, Yi; Gao, Furong Conference paper
Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, pp. 999-1004, Vol. 2, July 12-15, 2009, Istanbul, Turkey
Yao, Yuan; Gao, Furong Conference paper
Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques
The 8th World Congress of Chemical Engineering, Montreal, 23-27 August, 2009
Qin, Xusong; Gao, Furong; Chen, Guohua Conference paper
Fault-tolerant control for batch processes - Overview and outlook
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 908-913
Wang, Youqing; Zhou, Donghua; Gao, Furong Conference paper
Identification of low-order process model with time delay from closed-loop step test
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 2587-2591
Liu, Tao; Gao, Furong; Zhao, Chunhui Conference paper
Identification of low-order unstable process model from closed-loop step test
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, v.7, (1), 2009, p. 447-451, July, Istanbul, Turkey
Liu, Tao; Gao, Furong Conference paper
Identification of time delay model for integrating processes from closed-loop step test
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 615-619
Liu, Tao; Gao, Furong; Zhao, Chunhui Conference paper
Improved independent component regression modeling
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 1507-1512
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli Conference paper
Iterative learning control of mold-open position in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 5, 2009, p. 2946-2950
Mo, Shengyong; Yang, Yi; Gao, Furong Conference paper

2008 20

A systematic approach for on-line identification of second-order process model from relay feedback test
AIChE journal, v. 54, (6), 2008, JUN, p. 1560-1578
Liu, Tao; Gao, Furong; Wang, Youqing Article
Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test
Industrial & engineering chemistry research, v. 47, (4), 2008, FEB 20, p. 1140-1149
Liu, Tao; Gao, Furong Article
Barrel temperature control during operation transition in injection molding
Control engineering practice, v. 16, (11), 2008, NOV, p. 1259-1264
Yao, Ke; Gao, Furong; Allgoewer, Frank Article
Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding
Sensors and Actuators a-physical, v. 141, (2), 2008, FEB 15, p. 712-722
Wong, Ho Yin; Fung, Ka Tsai; Gao, Furong Article
Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes
Industrial & engineering chemistry research, v. 47, (24), 2008, DEC 17, p. 9996-10008
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Zhang, Yingwei Article
Identification of integrating and unstable processes from relay feedback
Computers & chemical engineering, v. 32, (12), 2008, DEC 22, p. 3038-3056
Liu, Tao; Gao, Furong Article
Injection Molding Control: From Single Cycle to Batch Control
Advances in polymer technology, v. 27, (4), 2008, WIN, p. 217-223
Yang, Yi; Yao, Ke; Gao, Furong Article
Iterative learning model predictive control for multi-phase batch processes
Journal of process control, v. 18, (6), 2008, JUL, p. 543-557
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Iterative learning reliable control of batch processes with sensor faults
Chemical engineering science, v. 63, (4), 2008, FEB, p. 1039-1051
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Model Migration with Inclusive Similarity for Development of a New Process Model
Industrial & engineering chemistry research, v. 47, (23), 2008, DEC 3, p. 9508-9516
Lu, Junde; Gao, Furong Article
Process Modeling based on process similarity
Industrial & engineering chemistry research, v. 47, (6), 2008, MAR 19, p. 1967-1974
Lu, Junde; Gao, Furong Article
Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance
IEEE transactions on automatic control, v. 53, (11), 2008, DEC, p. 2690-2695
Liu, Tao; Gao, Furong Article
Subspace identification for two-dimensional dynamic batch process statistical monitoring
Chemical engineering science, v. 63, (13), 2008, JUL, p. 3411-3418
Yao, Yuan; Gao, Furong Article
Variable structure control for a class of nonlinear systems with mismatched uncertainties
Applied mathematics and computation, v. 200, (1), 2008, JUN 15, p. 387-400
Wang, Youqing; Jiang, Canghua; Zhou, Donghua; Gao, Furong Article
An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model
18th INTERNATIONAL CONGRESS OF CHEMICAL AND PROCESS ENGINEERING, Vol. 4, p1332, 24-28 AUGUST 2008, PRAGUE, CZECH REPUBLIC
Zhang, Lei; Chen, Xi; Gao, Furong Conference paper
Barrel Temperature Control in Injection Moulding Process
Symposium on Advanced Molding Technology and Materials Processing, SANTMP'08, Beijing, China. 16-17 November, 2008
Yao, Ke; Yang, Yi; Gao, Furong Conference paper
Injection moulding control and optimization: from applied research to academic research
北京自動化學會年會, 15 November, 2008. Beijing University of Science and Technology, Beijing
Gao, Furong Conference paper
Multi-phase batch process monitoring
中國國家自然科學基金委雙清論壇, 北京西郊賓館, 4－7 November, 2008
Gao, Furong Conference paper
Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 10933-10938
Liu, Tao; Gao, Furong Conference paper
Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 4499-4510
Yao, Yuan; Gao, Furong Conference paper

2007 16

Active fault-tolerant control of nonlinear batch processes with sensor faults
Industrial & engineering chemistry research, v. 46, (26), 2007, DEC 19, p. 9158-9169
Wang, Youqing; Yang, Yi; Zhou, Donghua; Gao, Furong Article
Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data
Industrial and Engineering Chemistry Research, v. 46, (14), 2007, p. 4943-4953
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Lu, Ningyun; Jia, Mingxing Article
Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays
Journal of process control, v. 17, (2), 2007, FEB, p. 173-188
Liu, Tao; Zhang, Weidong; Gao, Furong Article
Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays
Industrial & engineering chemistry research, v. 46, (20), 2007, SEP 26, p. 6546-6557
Liu, Tao; Zhang, Weidong; Gao, Furong Article
Application of a capacitive transducer for online part weight prediction and fault detection in injection molding
Polymer engineering and science, v. 47, (4), 2007, APR, p. 347-353
Fung, Ka Tsai; Gao, Furong; Chen, Xi Article
Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)
Industrial & engineering chemistry research, v. 46, (24), 2007, NOV 21, p. 8033-8043
Yao, Yuan; Gao, Furong Article
Optimal start-up control of injection molding barrel temperature
Polymer engineering and science, v. 47, (3), 2007, MAR, p. 254-261
Yao, Ke; Gao, Furong Article
Optimization of decentralized PI/PID controllers based on genetic algorithm
Asian journal of control, v. 9, (3), 2007, SEP, p. 306-316
Li, Donghai; Gao, Furong; Xue, Yali; Lu, Chongde Article
Robust fault-tolerant control of a class of non-minimum phase nonlinear processes
Journal of process control, v. 17, (6), 2007, JUL, p. 523-537
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes
Journal of process control, v. 17, (9), 2007, OCT, p. 715-727
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
新型注塑螺杆性能研究
塑料工業=China Plastics Industry, v. 2007, (6), 2007, p. 23-25
金志明; 高福榮 Article
Batch Process Modeling Based on Process Similarity
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, 6-8 June, 2007, Vol. 2, pp. 379-384, 6-8 June, 2007
Lu, Junde; Gao, Furong Conference paper
Control of Multi-Phase Batch Processes: Formulation and Challenge
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 339-344, 6-8 June, 2007
Wang, Youqing; Yang, Yi; Gao, Furong; Zhou, Donghua Conference paper
Electrocoagulation and Electroflotation of Restaurant Wastewater – Pilot Plant Study
Advanced Technologies for Environmental Remediation – A Symposium in Honour of Professor Po Lock Yue, Hong Kong, June 15, 2007.
Qin, Xusong; Gao, Furong; Chen, Guohua Conference paper
Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 243-248, 6-8 June, 2007
Shi, Jia; Gao, Furong Conference paper
Two-Dimensional Dynamic PCA with Auto-Selected Support Region
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 1, pp. 69-74, 6-8 June, 2007
Yao, Yuan; Lu, Ningyun; Gao, Furong Conference paper

2006 18

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4603-4616
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4617-4628
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model
Polymer engineering and science, v. 46, (4), 2006, APR, p. 540-548
Yang, Yi; Gao, Furong Article
Iterative learning fault-tolerant control for batch processes
Industrial & engineering chemistry research, v. 45, (26), 2006, DEC 20, p. 9050-9060
Wang, Youqing; Shi, Jia; Zhou, Donghua; Gao, Furong Article
Kernel classifier with adaptive structure and fixed memory for process diagnosis
AIChE journal, v. 52, (10), 2006, OCT, p. 3515-3531
Wang, Haiqing; Li, Ping; Gao, Furong; Song, Zhihuan; Ding, Steven X. Article
Profiling of injection velocity for uniform mold filling
Advances in polymer technology, v. 25, (1), 2006, SPR, p. 13-21
Chen, Xi; Gao, Furong Article
Robust fault detection and isolation for uncertain linear retarded systems
Asian journal of control, v. 8, (2), 2006, JUN, p. 141-152
Jiang, Canghua; Zhou, Donghua; Gao, Furong Article
Robust iterative learning control design for batch processes with uncertain perturbations and initialization
AIChE journal, v. 52, (6), 2006, JUN, p. 2171-2187
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Stage-based online quality control for batch processes
Industrial & engineering chemistry research, v. 45, (7), 2006, MAR 29, p. 2272-2280
Lu, Ningyun; Gao, Furong Article
Statistical modeling and online monitoring for batch processes
Zidonghua Xuebao/Acta Automatica Sinica, v. 32, (3), 2006, p. 400-410
Lu, Ningyun; Wang, Fuli; Gao, Furong; Wang, Shu Article
间歇过程的统计建模与在线监测
自动化学报, v. 32, (3), May 2006, p. 400-410
陆宁云; 王福利; 高福荣; 王姝 Article
2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 215-220, Brazil, April 2-5, 2006
Shi, Jia; Gao, Furong; Wu, Tie-Jun Conference paper
Development of A Capacitive Sensor for Injection Molding
Control of Particulate Processes VII, Engineering Conferences International, Harrison Hot Springs, BC, Canada, 29 October – 2 November, 2006
Gao, Furong; Wong, Ho Yin; Fung, Ka Tsai; Chen, Xi Conference paper
Injection Molding Control & Monitoring
第17屆中國過程控制會議, 2006年7月31日－8月3日, 無錫, China (大會報告)
Gao, Furong Conference paper
INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 385-390, Brazil, April 2-5, 2006
Yang, Yi; Gao, Furong Conference paper
Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer
Proceedings - 2006 Academic Workshop on Advanced Forming Technology and Materials Processing，AWAFTMP'06, Shanghai, China. 21-25 October, 2006, pp. 38-46
Gao, Furong; Fung, Ka Tsai; Chen, Xi; Yang, Yi Conference paper
PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. II, pp. 951- 956, Brazil, April 2-5, 2006
Lu, Ningyun; Yao, Yuan; Gao, Furong Conference paper
注射成型用高性价比傳感器
中國塑料加工工業協會塑料技術協作委員會, 2006年會暨塑料工業高新技術及產業化研討會 (Plastech2006), 12-15 August, 2006
Gao, Furong Conference paper

2005 21

Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation
Journal of Applied Electrochemistry, v. 35, (2), 2005, FEB, p. 185-191
Chen, Xueming; Gao, Furong; Chen, Guohua Article
Effect of dielectric material on microwave freeze drying of skim milk
Drying technology, v. 23, (1-2), 2005, p. 317-340
Wang, Wei; Chen, Guohua; Gao, Furong Article
Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model
Industrial & engineering chemistry research, v. 44, (21), 2005, OCT 12, p. 8095-8105
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
MADDOCK注塑螺杆性能研究
塑料=Plastics, v. 2005, (05), 2005, p. 77-80+31
金志明; 高福榮 Article
On-line detection of the gate freezing-off time for injection molding
Polymer engineering and science, v. 45, (1), 2005, JAN, p. 33-41
Chen, Xi; Gao, Furong Article
Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system
Journal of process control, v. 15, (8), 2005, DEC, p. 907-924
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Stage-based process analysis and quality prediction for batch processes
Industrial & engineering chemistry research, v. 44, (10), 2005, MAY 11, p. 3547-3555
Lu, Ningyun; Gao, Furong Article
Two-dimensional dynamic PCA for batch process monitoring
AIChE journal, v. 51, (12), 2005, DEC, p. 3300-3304
Lu, Ningyun; Yao, Yuan; Gao, Furong; Wang, Fuli Article
注射成型塑化过程的可视化实验研究
中国塑料=China Plastics, v. 2005, (09), 2005, p. 73-76
金志明; 馬艷娥; 高福榮 Article
间歇过程滑动窗口子时段PCA建模和在线监测
控制与决策=Control and Decision, v. 2005, (09), 2005, p. 1034-1037
郭小萍; 陸寧云; 高福榮; 王福利 Article
塑料成型过程控制
《工业过程控制技术》应用篇 / 2005, Chapter 5, p. 131-180
Gao, Furong Book chapter
Adaptive GPC control of barrel temperatures in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 378-382
Yao, Ke; Gao, Furong Conference paper
In-Mold Monitoring of Injection using capacitive transducer
Advanced Forming Technology – 2005 Cross-Strait Academic Workshop on Advanced Technology of Materials Forming and Die/Mold (AWATMFDM"05), Xi"an, China, August 12-15, p. 447-460
Gao, Furong; Fung, Ka Tsai; Chen, Xi Conference paper
On-line check-ring failure detection and compensation in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2005, p. 49-53
Yang, Yi; Gao, Furong Conference paper
Part weight prediction using capacitive transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 388-392
Fung, Ka Tsai; Gao, Furong; Chen, Xi Conference paper
Part Weight Prediction Using Captive Transduer in Injection Molding
Society of Plastics Engineers Annual Technical Conference, ANTEC 2005, Boston, USA, v.2, May 1-5 2005, p. 823-827
Fung, Ka Tsai; Gao, Furong; Chen, Xi Conference paper
Prospective of Injection Molding Control and Monitoring
《中國塑料》論壇 — 塑料注塑新技術國際研討會, pp. 111-126, 12-14 July 2005, Shanghai, China
Gao, Furong; Yang, Yi Conference paper
基于在線測量技術的注塑成型塑化系統研究
2005《中國塑料》論壇—— 塑料注塑新技術國際研討會。, pp. 132-136, 12-14 July, 2005, Shanghai, China
Jin, Zhiming; Gao, Furong Conference paper
基于在线测量技术的注塑成型塑化系统研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005,p. 132-136
金志明; 高福荣 Conference paper
注塑成型中的熔体温度均匀性研究
《中国塑料》论坛—— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 340-346
金志明; 朱复华; 高福荣 Conference paper
注塑成型塑化过程的可视化研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 343-346
金志明; 朱复华; 高福荣 Conference paper

2004 17

A soft-sensor development for melt-flow-length measurement during injection mold filling
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 384, (1-2), 2004, OCT 25, p. 245-254
Chen, Xi; Gao, Furong; Chen, Guohua Article
An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding
Polymer engineering and science, v. 44, (7), 2004, JUL, p. 1313-1318
Jin, Zhi Ming; Gao, Furong; Zhu, Fuhua Article
Capacitive transducer for in-mold monitoring of injection molding
Polymer engineering and science, v. 44, (8), 2004, AUG, p. 1571-1578
Chen, Xi; Chen, Guohua; Gao, Furong Article
Multirate dynamic inferential modeling for multivariable processes
Chemical engineering science, v. 59, (4), 2004, MAR, p. 855-864
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Article
PCA-based modeling and on-line monitoring strategy for uneven-length batch processes
Industrial & engineering chemistry research, v. 43, (13), 2004, JUN 23, p. 3343-3352
Lu, Ningyun; Gao, Furong; Yang, Yi; Wang, Fuli Article
Sub-PCA modeling and on-line monitoring strategy for batch processes
AIChE journal, v. 50, (1), 2004, JAN, p. 255-259
Lu, Ningyun; Gao, Furong; Wang, Fuli Article
Advanced Control of Chemical Processes
Advanced Control of Chemical Processes / v. 1&2, 2004
Allgower, Frank; Gao, Furong Book
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier Limited, 2004
Allg?wer, Frank; Gao, Furong Book
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier, 2004
Allg?wer, Frank; Gao, Furong Book
A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 746-750
Ma, Liling; Wang, Fuli; Jiang, Yunbo; Gao, Furong Conference paper
A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT
Pre-print of 7th International Symposium on Adavanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 873-878
Shao, Cheng; Juan, Juan Nie; Gao, Furong Conference paper
A stage-based monitoring method for batch process with minimal reference data
DYCOPS 2004, Boston USA, July 5-7 2004
Lu, Ningyun; Yang, Yi; Wang, Fuli; Gao, Furong Conference paper
Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 879-884
Shao, Cheng; Luo, Guangjun; Gao, Furong Conference paper
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
Proceedings of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 639-644
Yang, Yi; Gao, Furong Conference paper
SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 740-745
Chang, Yuqing; Wang, Fuli; Gao, Furong Conference paper
Stage-Based Multivariate Statistical Analysis for Injection Molding
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 471-476
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper
Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression
PPS-20 (Polymer Processing Society Annual Conference), Akron, Ohio, USA, June 20-24 2004
Yang, Yi; Gao, Furong Conference paper

2003 14

A study of packing profile on injection molded part quality
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 358, (1-2), 2003, OCT 15, p. 205-213
Chen, Xi; Gao, Furong Article
Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis
Industrial & engineering chemistry research, v. 42, (18), 2003, SEP 3, p. 4198-4207
Lu, Ningyun; Wang, Fuli; Gao, Furong Article
High-performance Ti/BDD electrodes for pollutant oxidation
Environmental science & technology, v. 37, (21), 1 November 2003, Pages 5021-5026
Chen, Xueming; Chen, Guohua; Gao, Furong; Yue, Po Lock Article
Robust Stability of Optimal Iterative Learning Control and Application to Injection Molding Machine
自动化学报=Acta Automatica Sinica, v. 2003, (01), 2003, p. 72-79
邵誠; 高福榮; 楊毅 Article
塑料注射成型熔融过程中的固相破碎现象
中国塑料, v. 17, (2), 2003, p. 94-97
金志明; 朱复华; 高福荣 Article
注射成型中的熔体温度均匀性研究
中国塑料, v. 17, (3), 2003, p. 88-91
金志明; 朱复华; 高福荣 Article
注射成型塑化过程的可视化研究
中国塑料, v. 17, (4), 2003, p. 6-90
金志明; 朱复华; 高福荣 Article
A Fault Accomodation Control for Nonlinear Processes
ADCHM 2003, Hong Kong, 18-20 June
Zhang, Yingwei; Wang, Fuli; Yu, Ge; Gao, Furong Conference paper
Injection Molding Control: Challenge and Prospective
7th International Conference on Manufacturing Technology: Global Manufacturing & Innovation, Chiang Chen Industrial Charity Foundation, Hong Kong Convention Center, 7-9 December
Gao, Furong Conference paper
Multi-PCA Models for Process Monitoring and Fault Diagnosis
ADCHM 2003, Hong Kong
Ma, Liling; Jiang, Yubao; Wang, Fuli; Gao, Furong Conference paper
Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column
ADCHM 2003, Hong Kong, 18-20 June
Shao, Cheng; Luo, Guangjun; Gao, Furong Conference paper
Setting of Injection Molding Packing profile
Advanced Molding and Mold Conference, 94-99
Gao, Furong; Chen, Xi Conference paper
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
ADCHM 2003, Hong Kong, 18-20 June
Yang, Yi; Gao, Furong Conference paper
Stage-Based Multivariate Statistical Analysis for Injection Molding
ADCHM 2003, Hong Kong, 18-20 June
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper

2002 8

Bound estimation for solutions of a class of delay differential inequalities
NONLINEAR analysis-theory METHODS & APPLICATIONS, v. 49, (4), 2002, MAY, p. 525-533
Gao, Furong; Hou, Chunhai Article
Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities
Journal of optimization theory and applications, v. 113, (3), 2002, JUN, p. 621-634
Yu, Li; Gao, Furong Article
Processing of PC/LCP in situ composites by closed-loop injection molding
Composites science and technology, v. 62, (6), 2002, p. 757-765
Chan, Hong Shing; Leng, Yang; Gao, Furong Article
基于质量的注塑过程建模方法研究：最优保压压力曲线的设定
中国塑料, v. 16, (51), 2002
陈曦; 高福荣; 钱积新 Article
注塑过程熔体充填长度的动态神经网络软测量模型
化工自动化及仪表, v. 29, (2), 2002, p.43-46
陈曦; 钱积新; 高福荣 Article
Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.
Intelligent Control of Injection Molding Process / June 2002
Gao, Furong Book
A control strategy for process with output dynamic nonlinearity
Recent Developments in optimization and optimal control in chemical engineering, Research Signpost / 115-127
Wang, Fuli; Gao, Furong; Li, Mingzhong Book chapter
Solid-bed break-up during plastication in injection molding
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 572-575
Jin, Zhiming; Gao, Furong Conference paper

2001 10

Analysis and Implementation of the Double-Controller Scheme
Developments in Chemical Engineering and Mineral Processing, v. 9, (1-2), 2001, p. 57-68
Tian, Y.C.; Gao, Furong Article
Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 79, (2), 2001, APR, p. 263-272
Li, Mingzhong; Yang, Yi; Gao, Furong; Wang, Fuli Article
H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach
International Journal of Systems Science, v. 32, (7), 2001, JUL, p. 905-913
Hou, CH; Gao, FR Article
Identification and control of nonlinear processes in the presence of unmeasured load disturbances
Industrial & engineering chemistry research, v. 40, (10), 2001, MAY 16, p. 2275-2282
Li, Mingzhong; Wang, Fuli; Gao, Furong Article
Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays
Journal of the Franklin Institute, v. 338, (1), 2001, p. 101-110
Li, Yu; Gao, Furong Article
PID-based sliding mode controller for nonlinear processes
Industrial & engineering chemistry research, v. 40, (12), 2001, JUN 13, p. 2660-2667
Li, Mingzhong; Wang, Fuli; Gao, Furong Article
Robust iterative learning control with applications to injection molding process
Chemical engineering science, v. 56, (24), 2001, DEC, p. 7025-7034
Gao, Furong; Yang, Yi; Shao, Cheng Article
Strategies for injection filling velocity control
Journal of reinforced plastics and composites, v. 20, (13), 2001, p. 1160-1170
Yang, Yi; Gao, Furong Article
Fuzzy modeling for injection molded part quality control
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 629-632
Yang, Yi; Gao, Furong Conference paper
Optimal iterative learning control with uncertain initializations and disturbances
6th IFAC Symposium on Dynamics and control of process systems, Chejudo Island, Korea, June 4-6 2001, p. 437-442
Shao, Cheng; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper

2000 15

A simple nonlinear controller with diagonal recurrent neural network
Chemical engineering science, v. 55, (7), 2000, APR, p. 1283-1288
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
A visual barrel system for study of reciprocating screw injection molding
Polymer engineering and science, v. 40, (6), 2000, JUN, p. 1334-1343
Gao, Furong; Jin, Zhi Ming; Chen, Xi Article
Adaptive control of the filling velocity of thermoplastics injection molding
Control engineering practice, v. 8, (11), 2000, NOV, p. 1285-1296
Yang, Yi; Gao, Furong Article
An analytical predictive control law for a class of nonlinear processes
Industrial & engineering chemistry research, v. 39, (6), 2000, JUN, p. 2029-2034
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Improved delay time estimation of RC ladder networks
IEEE TRANSACTIONS on Circuits and SYSTEMS i-fundamental THEORY and APPLICATIONS, v. 47, (2), 2000, FEB, p. 242-246
Hou, Chun Hai; Gao, Furong; Qian, Jixin Article
Mathematical Modeling of a Continuous Galvanizing Annealing Furnace
Developments in Chem Eng & Mineral Processing, v. 8, (3/4), 2000, p.359-374
Tian, Yuchu; Hou, Chunhai; Gao, Furong Article
Neural network approach to predict melt temperature in injection molding processes
Chinese Journal of Chemical Engineering, v. 8, (4), 2000, DEC, p. 326-331
Wang, BG; Gao, FR; Yue, PL Article
Neural network-based optimal iterative controller for nonlinear processes
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 78, (2), 2000, APR, p. 363-370
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Predictive control for processes with input dynamic nonlinearity
Chemical engineering science, v. 55, (19), 2000, OCT, p. 4045-4052
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
A Transparent barrel for study of reciprocating screw injection molding
Society of Plastics Engineers, Annual Technical Conference (ANETC2000), Orlando, USA, May 7-11 2000, p. 523-527
Gao, Furong; Jin, Zhiming; Chen, Xi Conference paper
An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation
ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, p. 633-637
Chen, X.; Gao, FR Conference paper
Guaranteed cost control of uncertain discrete linear time-delay systems
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 2481-2485
Yu, Li; Gao, Furong; Xue, Anke Conference paper
Modelling and control of processes with output dynamic nonlinearity
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 240-244
Wang, Fuli; Gao, Furong; Li, Mingzhong Conference paper
Robust adaptive control of bilinear plants with high-order perturbation uncertainties
Proceedings of the IEEE Conference on Decision and Control, v. 5, 2000, p. 4934-4938
Gao, Furong; Shao, Cheng; Wang, Fuli; Wang, Wei Conference paper
Robust H∞ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties
The 39th IEEE Conference on Decision and Control, Sydney, Australia, December 12-15 2000, p. 2754-2755
Yu, Li; Gao, Furong Conference paper

1999 20

A neural-network-based nonlinear controller using an extended Kalman filter
Industrial & engineering chemistry research, v. 38, (6), 1999, JUN, p. 2345-2349
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding
Polymer engineering and science, v. 39, (1), 1999, JAN, p. 3-17
Tsoi, Hoi Pang; Gao, Furong Article
Control of integrator processes with dominant time delay
Industrial & engineering chemistry research, v. 38, (8), 1999, AUG, p. 2979-2983
Tian, Yu Chu; Gao, Furong Article
Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations
Journal of Mathematical Analysis and Applications, v. 238, (2), 1999, OCT 15, p. 558-566
Hou, Chun Hai; Gao, Furong Article
Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding
Polymer engineering and science, v. 39, (10), 1999, OCT, p. 2042-2063
Yang, Yi; Gao, Furong Article
Evaluation of gas pressure dynamics for gas-assisted injection molding process
International communications in heat and mass transfer, v. 26, (1), 1999, JAN, p. 85-93
Chao, Sher Meng; Wang, Shih Ming; Chen, Shia Chung; Gao, Furong Article
Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks
Industrial & engineering chemistry research, v. 38, (11), 1999, NOV, p. 4330-4336
Gao, Furong; Li, Mingzhong; Wang, Fuli; Wang, Baoguo; Yue, Po Lock Article
Injection velocity control of thermoplastic injection molding via a double controller scheme
Industrial & engineering chemistry research, v. 38, (9), 1999, SEP, p. 3396-3406
Tian, Yu Chu; Gao, Furong Article
Injection velocity control using a self-tuning adaptive controller
International polymer processing, v. 14, (2), 1999, JUN, p. 196-204
Yang, Yi; Gao, Furong Article
Melt temperature profile prediction for thermoplastic injection molding
Polymer engineering and science, v. 39, (9), 1999, SEP, p. 1787-1801
Zhao, Chunhui; Gao, Furong Article
Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations
Journal of Mathematical Analysis and Applications, v. 237, (2), 1999, SEP 15, p. 573-582
Hou, Chun Hai; Gao, Furong; Qian, Jixin Article
A comparison of different strategies for injection filling velocity control
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, p. 705-709
Yang, Y.; Gao, FR Conference paper
A double-controller scheme for controlling dominant delay processes
DYNAMICS & CONTROL OF PROCESS SYSTEMS 1998, VOLUMES 1 AND 2, 1999, p. 443-448
Gao, FR; Tian, YC Conference paper
Adaptive Control of Injection Velocity of Thermoplastics Injection Molding
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. N, 1999, p. 253-258
Yang, Yi; Gao, Furong Conference paper
Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding
APCChE"99, Korea, v. 2, August 1999, p. 1009-1012
Gao, Furong; Yang, Yi Conference paper
Control of Integrator Processes with Long Dead-Time
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. C, 1999, p. 277-282
Tian, Yu-Chu; Gao, Furong; Tade, Moses O.; Tang, Jinyu Conference paper
Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate
Preprints of 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 345-346
Chan, Hong Shing; Leng, Yang; Gao, Furong Conference paper
Neural Networks Prediction of Melt Temperatures at Plastication Phase
Preprints of the 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 353-354
Wang, Baoguo; Gao, Furong; Yue, Polock Conference paper
On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks
PPS-15, The Polymer Processing Society, CD-ROM, The Netherlands, May 31 - June 4 1999
Gao, Furong; Wang, Baoguo; Yue, Polock Conference paper
Predictive Control with Neuro-compensation for a Class of Nonlinear Processes
7th European Conference on Intelligent Techniques and Soft Computing, (EUFITT"99), CD-Rom, Aachen, Germany, September 13-16 1999
Gao, Furong; Wang, Fuli; Li, Mingzhong Conference paper

1998 10

Adaptive control of chaotic continuous-time systems with delay
PHYSICA d-nonlinear PHENOMENA, v. 117, (1-4), 1998, JUN 15, p. 1-12
Tian, Yu Chu; Gao, Furong Article
Adaptive control of nozzle melt packing pressure
Journal of intelligent material systems and structures, v. 9, (12), 1998, DEC, p. 1046-1050
Yang, Yi; Gao, Furong Article
Compensation of dominant and variable delay in process systems
Industrial & engineering chemistry research, v. 37, (3), 1998, MAR, p. 982-986
Tian, Yu Chu; Gao, Furong Article
Double-controller scheme for control of processes with dominant delay
IEE proceedings-control THEORY and APPLICATIONS, v. 145, (5), 1998, SEP, p. 479-484
Tian, Yu Chu; Gao, Furong Article
Double-controller scheme for separating load rejection from set-point tracking
CHEMICAL ENGINEERING RESEARCH & DESIGN, v. 76, (A4), 1998, MAY, p. 445-450
Tian, Yu Chu; Gao, Furong Article
Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.
Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding / May 1998
Gao, Furong Book
A Fuzzy Logic Controller for Injection Ram Velocity
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 44, 1998, p. 641-644
Tsoi, Hoi-Pang; Gao, Furong Conference paper
Adaptive Control of Nozzle Melt Packing Pressure
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 1, 1998, p. 472-476
Gao, Furong; Yang, Yi Conference paper
An Experimental Analysis of Injection Molding Melt Temperature
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 1998, p. 393-397
Zhao, Chunhua; Gao, Furong Conference paper
射出成形におけるファヅィ理論を用いた自動保壓切換
成形加工シソポヅァ, 1998, p. 273-276
Gao, Furong; Zhao, Chunhua; 平塚和人; 蔡文遠 Conference paper

1997 6

Extraction of delay information from chaotic time series based on information entropy
PHYSICA D, v. 108, (1-2), 1997, SEP 15, p. 113-118
Tian, Yu Chu; Gao, Furong Article
Injection Molding Control
Injection Molding: Fundamentals and Application / Edited by M. R. Kamal. 1997, Chapter 12, p. 451-502
Gao, Furong; Yi, Yang Book chapter
A Real-time Fuzzy Logic Controller for Ram Velocity in Injection Molding
4th International Conference on Manufacturing Technology in Hong Kong, CD-ROM, November30 - 3 December 1997
Tsoi, Hoi-Pang; Gao, Furong Conference paper
Complicated Dynamics in Simple Delay Systems
1997 China-Korea Joint Workshop on Process Systems Engineering, Hangzhou, China, June 27-29 1997, p. 58-63
Tian, Yu-Chu; Gao, Furong Conference paper
Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding
ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3, 1997, p. 480-486
Gao, Furong; Yang, Yi Conference paper
Simple delay systems with chaotic dynamics
CONTROL OF OSCILLATIONS AND CHAOS - 1997 1ST INTERNATIONAL CONFERENCE, PROCEEDINGS, VOLS 1-3, 1997, p. 319-320
Tian, Yu Chu; Gao, Furong Conference paper

1996 2

Cavity pressure control during the cooling stage in thermoplastic injection molding
Polymer engineering and science, v. 36, (19), 1996, OCT, p. 2467-2476
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article
Cavity Pressure Dynamics and Self-tuning Control for Filling and Packing Phases of Thermoplastics Injection Molding
Polymer Engineering and Science, v. 36, (9), 1996, p. 1272-1285
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article

1995 2

Adaptive Control of Cavity Pressure During Filling
Engineering Plastics, v. 8, 1995, p. 136-148
Gao, Furong; Kamal, Musa R.; Patterson, Wayne Ian Article
Cavity Pressure Adaptive Control for Thermoplastics Injection Molding
3rd International Conference on Manufacturing Technology, CD-ROM, Hong Kong, December 1995, p. 304-309
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper

1994 4

Self‐tuning cavity pressure control of injection molding filling
Advances in Polymer Technology, 13, 1994
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article
Cavity Pressure Control during Cooling
Society of Plastics Engineers, Annual Technical Conference (ANTEC'94), San Francisco, USA, May 1994, p. 706-711
Kamal, Musa R.; Gao, Furong; Patterson, Wayne Ian Conference paper
Control of Cavity Pressure during Packing, Society of Plastics Engineers
Annual Technical Conference (ANTEC'94), San Francisco, USA, (pt 1),May 1994, p. 701-705
Patterson, Wayne Ian; Gao, Furong; Kamal, Musa R. Conference paper
On-line Quality Monitoring Coupling Computer Analysis and Actual Measurement
Japanese Society of Polymer Processing, Tokyo, Japan, June 1994
Rowland, J.C.; Gao, Furong Conference paper

1993 3

Dynamics and Control of Surface and Mold Temperatures in Injection Molding
International Polymer Processing, v. 8, (2), 1993, p. 147-157
Gao, Furong; Patterson, W.I.; Kamal, M.R. Article
Adaptive Control of Cavity Pressure During Filling, Society of Plastics Engineers
Ann. Technical Conf. (ANTEC'93), pp. 565-569, New Orleans, USA, May 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper
Cavity Pressure Control of Injection Molding Filling
The Polymer Processing Society Conference, Tokyo, Japan, October 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper

1992 1

A Versatile Computer Control System for Injection Molding
Society of Plastics Engineers, Annual Technical Conference (ANTEC'92), Detroit, USA, May 1992, p. 1887-1890
Gao, Furong; Fusser, H.; Patterson, W.I.; Kamal, M.R. Conference paper

1990 1

Mould Temperature Measurement and Control, Society of Plastics Engineers
Annual Technical Conference (ANTEC'90), Dallas, USA, May 1990, p. 227-232
Patterson, W.I.; Kamal, M.R.; Gao, Furong Conference paper


Expand All Collapse All


Article 1

Retrospective comparison of several typical linear dynamic latent variable models for industrial process monitoring
Computers and Chemical Engineering, v. 157, January 2022, article number 107587
Zheng, Jiale; Zhao, Chunhui; Gao, Furong


Expand All Collapse All


Article 17

A Balancing Current Ratio based State-Of-Health Estimation Solution For Lithium-Ion Battery Pack
IEEE Transactions on Industrial Electronics, 3 September 2021, p. 1-1
Tang, Xiaopeng; Gao, Furong; Liu, Kailong; Liu, Qi; Foley, Aoife M.
An improved real-valued negative selection algorithm based on the constant detector for anomaly detection
Journal of Intelligent and Fuzzy Systems, v. 40, (5), 22 April 2021, p. 8793-8806
Li, Dong; Sun, Xin; Gao, Furong; Liu, Shulin
Comprehensive study and improvement of experimental methods for obtaining referenced battery state-of-power
Journal of Power Sources, v. 512, November 2021, article number 230462
Tang, Xiaopeng; Liu, Kailong; Liu, Qi; Peng, Qiao; Gao, Furong
Constrained Model Predictive Fault-Tolerant Control for Multi-Time-Delayed Batch Processes with Disturbances: A Lyapunov-Razumikhin Function Method
Journal of the Franklin Institute, October 2021
Wang, Limin; Song, Jiang; Zhang, Ridong; Gao, Furong
Continual learning classification method and its application to equipment fault diagnosis
Applied Intelligence, 12 May 2021
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin
Continual learning classification method for time-varying data space based on artificial immune system
Journal of Intelligent and Fuzzy Systems, v. 40, (5), 22 April 2021, p. 8741-8754
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin
Continual learning classification method with constant-sized memory cells based on the artificial immune system
Knowledge-Based Systems, v. 213, February 2021, article number 106673
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin
Control-Oriented Two-Dimensional Online System Identification for Batch Processes
Industrial and Engineering Chemistry Research, v. 60, (20), May 2021, p. 7656-7666
Gao, Kaihua; Lu, Jingyi; Xu, Zuhua; Gao, Furong
Data-Efficient Constrained Learning for Optimal Tracking of Batch Processes
Industrial and Engineering Chemistry Research, v. 60, (43), October 2021, p. 15658-15668
Zhou, Yuanqiang; Gao, Kaihua; Li, Dewei; Xu, Zuhua; Gao, Furong
Fault Diagnosis of Complex Chemical Processes Using Feature Fusion of a Convolutional Network
Industrial and Engineering Chemistry Research, v. 60, (5), February 2021, p. 2232-2248
Wang, Nan; Li, Haisheng; Wu, Feng; Zhang, Ridong; Gao, Furong
Iterative Learning Control for Multiphase Batch Processes With Asynchronous Switching
IEEE Transactions on Systems Man Cybernetics-Systems, v. 51, (4), April 2021, article number 8721522, p. 2536-2549
Wang, Limin; Yu, Jingxian; Zhang, Ridong; Li, Ping; Gao, Furong
Non-stationary data reorganization for weighted wind turbine icing monitoring with Gaussian mixture model
Computers and Chemical Engineering, v. 147, April 2021, article number 107241
Jing, Hua; Zhao, Chunhui; Gao, Furong
Optimal synchronization control for heterogeneous multi-agent systems: Online adaptive learning solutions
Asian Journal of Control, August 2021
Zhou, Yuanqing; Li, Dewei; Gao, Furong
RBF Neural Network Modeling Approach Using PCA Based LM–GA Optimization for Coke Furnace System
Applied Soft Computing, v. 111, November 2021, article number 107691
Tao, Jili; Yu, Zheng; Zhang, Ridong; Gao, Furong
Reconstruction of the Incremental Capacity Trajectories from Current-Varying Profiles for Lithium-Ion Batteries
Iscience, v. 24, (10), 22 October 2021, article number 103103
Tang, Xiaopeng; Wang, Yujie; Liu, Qi; Gao, Furong
Recovering Large-scale Battery Aging Dataset With Machine Learning
Patterns, v. 2, (8), 13 August 2021, article number 100302
Tang, Xiaopeng; Liu, Kailong; Li, Kang; Widanage, Widanalage Dhammika; Kendrick, Emma; Gao, Furong
Two-Dimensional Iterative Learning Model Predictive Control for Batch Processes: A New State Space Model Compensation Approach
IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 51, (2), February 2021, p. 833-841
Zhang, Ridong; Gao, Furong


Expand All Collapse All


Article 17

A More General Incremental Inter -Agent Learning Adaptive Control for Multiple Identical Processes in Mass Production
Neurocomputing, v. 397, July 2020, p. 70-93
Qu, Hongyi; Li, Dewei; Zhang, Ridong; Yang, Shuang-Hua; Gao, Furong
A New Synthetic Minmax Optimization Design of H∞ LQ Tracking Control for Industrial Processes under Partial Actuator Failure
IEEE Transactions on Reliability, v. 69, (1), March 2020, article number 8601405, p. 322-333
Zhang, Ridong; Gao, Furong
Battery incremental capacity curve extraction by a two-dimensional Luenberger–Gaussian-moving-average filter
Applied Energy, v. 280, 15 September 2020, article number 115895
Tang, Xiaopeng; Liu, Kailong; Lu, Jingyi; Liu, Boyang; Wang, Xin; Gao, Furong
Continual learning classification method with new labeled data based on the artificial immune system
Applied Soft Computing Journal, v. 94, September 2020, article number 106423
Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin
Data-Driven Batch-End Quality Modeling and Monitoring Based on Optimized Sparse Partial Least Squares
IEEE Transactions on Industrial Electronics, v. 67, (5), May 2020, p. 4098-4107
Jiang, Qingchao; Yan, Xuefeng; Yi, Hui; Gao, Furong
Data-Driven Two-Dimensional Deep Correlated Representation Learning for Nonlinear Batch Process Monitoring
IEEE Transactions on Industrial Informatics, v. 16, (4), April 2020, p. 2839-2848
Jiang, Qingchao; Yan, Shifu; Yan, Xuefeng; Yi, Hui; Gao, Furong
Design of a Switching Control Strategy for Time-Varying Delay Batch Processes Using Fault Probability-Based Average Dwell Time Method
Industrial & Engineering Chemistry Research, v. 59, (11), March 2020, p. 5087-5102
Wang, Limin; Li, Bingyun; Zhang, Ridong; Gao, Furong
Design of Modified 2-Degree-of-Freedom Proportional–Integral–Derivative Controller for Unstable Processes
Measurement and Control, v. 53, (7-8), August 2020, p. 1465-1471
Li, Ziwei; Xu, Zheng; Zhang, Ridong; Zou, Hongbo; Gao, Furong
Fast economic model predictive control for marine current turbine generator system
Renewable Energy, v. 166, April 2020, p. 108-116
Teng, Yiming; Hu, Dewen; Wu, Feng; Zhang, Ridong; Gao, Furong
Intelligent Fault Diagnosis for Chemical Processes Using Deep Learning Multimodel Fusion
IEEE Transactions on Cybernetics, 30 December 2020
Wang, Nan; Yang, Fan; Zhang, Ridong; Gao, Furong
Joint estimation of battery state-of-charge and state-of-health based on a simplified pseudo-two-dimensional model
Electrochimica Acta, v. 344, June 2020, article number 136098
Liu, Boyang; Tang, Xiaopeng; Gao, Furong
Linearity Decomposition-Based Cointegration Analysis for Nonlinear and Nonstationary Process Performance Assessment
Industrial and Engineering Chemistry Research, v. 59, (7), February 2020, p. 3052-3063
Zou, Xiaoyu; Zhao, Chunhui; Gao, Furong
Model Migration Neural Network for Predicting Battery Aging Trajectories
IEEE Transactions on Transportation Electrification, v. 6, (2), June 2020, p. 363-374
Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Gao, Furong; Marco, James; Widanage, W. Dhammika
Multiphase two-dimensional time-slice dynamic system for batch process monitoring
Journal of Process Control, v. 85, January 2020, p. 184-198
Zhu, Jinlin; Yao, Yuan; Gao, Furong
Nonlinear Process Quality Prediction Using Wavelet Denoising OSC-SVM-PLS
Industrial and Engineering Chemistry Research, v. 59, (13), April 2020, p. 6021-6032
Yang, Fan; Li, Xiang; Bai, Jianjun; Zhang, Ridong; Gao, Furong
Optimal Iterative Learning Control for Batch Processes in the Presence of Time-Varying Dynamics
IEEE Transactions on Systems, Man, and Cybernetics: Systems, 10 November 2020
Lu, Jingyi; Cao, Zhixing; Hu, Qinran; Xu, Zuhua; Du, Wenli; Gao, Furong
Synthesis of ILC-MPC controller with data-driven approach for constrained batch processes
IEEE Transactions on Industrial Electronics, v. 67, (4), April 2020, article number 8691673, p. 3116-3125
Li, Dewei; He, Shaoying; Xi, Yugeng; Liu, Tao; Gao, Furong; Wang, Youqing; Lu, Jingyi

Book 1

Iterative learning stabilization and fault-tolerant control for batch processes
Iterative Learning Stabilization and Fault-Tolerant Control for Batch Processes / Limin Wang, Ridong Zhang, Furong Gao. Singapore : Springer Nature Singapore Pte Ltd., 2020
Wang, Limin; Zhang, Ridong; Gao, Furong


Expand All Collapse All


Article 19

110th Anniversary: An Overview on Learning-Based Model Predictive Control for Batch Processes
Industrial and Engineering Chemistry Research, v. 58, (37), September 2019, p. 17164-17173
Lu, Jingyi; Cao, Zhixing; Zhao, Chunhui; Gao, Furong
2D Switched Model-Based Infinite Horizon LQ Fault-Tolerant Tracking Control for Batch Process
Industrial and Engineering Chemistry Research, v. 58, (22), June 2019, p. 9540-9551
Luo, Weiping; Wang, Limin; Zhang, Ridong; Gao, Furong
A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging
Energy Conversion and Management, v. 180, January 2019, p. 162-170
Tang, Xiaopeng; Wang, Yujie; Zou, Changfu; Yao, Ke; Xia, Yongxiao; Gao, Furong
Aging trajectory prediction for lithium-ion batteries via model migration and Bayesian Monte Carlo method
Applied Energy, v. 254, November 2019, article number 113591
Tang, Xiaopeng; Zou, Changfu; Yao, Ke; Lu, Jingyi; Xia, Yongxiao; Gao, Furong
Batch Process Modeling and Monitoring With Local Outlier Factor
IEEE Transactions on Control Systems Technology, v. 27, (4), July 2019, article number 8325416, p. 1552-1565
Zhu, Jinlin; Wang, Youqing; Zhou, Donghua; Gao, Furong
Education in Process Systems Engineering: Why It Matters More Than Ever and How It Can Be Structured
Computers and Chemical Engineering, v. 126, July 2019, p. 102-112
Cameron, Ian T.; Engell, Sebastian; Georgakis, Christos; Asprion, Norbert; Bonvin, Dominique; Gao, Furong; Gerogiorgis, Dimitrios I.; Grossmann, Ignacio E.; Macchietto, Sandro; Preisig, Heinz A.; Young, Brent R.
Incipient Fault Detection for Multiphase Batch Processes with Limited Batches
IEEE Transactions on Control Systems Technology, v. 27, (1), January 2019, article number 8100636, p. 103-117
Zhang, Shumei; Zhao, Chunhui; Gao, Furong
Load-responsive model switching estimation for state of charge of lithium-ion batteries
Applied Energy, v. 238, March 2019, p. 423-434
Tang, Xiaopeng; Gao, Furong; Zou, Changfu; Yao, Ke; Hu, Wengui; Wik, Torsten
Model migration based battery power capability evaluation considering uncertainties of temperature and aging
Journal of Power Sources, v. 440, 15 November 2019, article number 227141
Tang, Xiaopeng; Wang, Yujie; Yao, Ke; He, Zhenwei; Gao, Furong
Multiobjective Two-Dimensional CCA-Based Monitoring for Successive Batch Processes with Industrial Injection Molding Application
IEEE Transactions on Industrial Electronics, v. 66, (5), May 2019, article number 8424187, p. 3825-3834
Jiang, Qingchao; Gao, Furong; Yan, Xuefeng; Yi, Hui
Multipoint Iterative Learning Mode Predictive Control
IEEE Transactions on Industrial Electronics, v. 66, (8), August 2019, article number 8482502, p. 6230-6240
Lu, Jingyi; Cao, Zhixing; Gao, Furong
Multivariate Statistical Monitoring of Key Operation Units of Batch Processes Based on Time-Slice CCA
IEEE Transactions on Control Systems Technology, v. 27, (3), May 2019, article number 8301609, p. 1368-1375
Jiang, Qingchao; Gao, Furong; Yi, Hui; Yan, Xuefeng
Nonlinear Multivariate Quality Prediction Based on OSC-SVM-PLS
Industrial and Engineering Chemistry Research, v. 58, (19), May 2019, p. 8154-8161
Li, Xiang; Wu, Feng; Zhang, Ridong; Gao, Furong
Performance-relevant kernel independent component analysis based operating performance assessment for nonlinear and non-Gaussian industrial processes
Chemical Engineering Science, v. 209, December 2019, article number 115167
Liu, Yan; Print Email Wang, Fuli; Chang, Yuqing; Gao, Furong; He, Dakuo
PI Based Indirect-Type Iterative Learning Control for Batch Processes with Time-Varying Uncertainties: A 2D FM Model Based Approach
Journal of Process Control, v. 78, June 2019, p. 57-67
Hao, Shoulin; Liu, Tao; Gao, Furong
Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries
Journal of Power Sources, v. 440, November 2019, article number 227118
Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Liu, Boyang; Gao, Furong; Widanalage, Dhammika Widanage
Run-To-Run Control for Active Balancing of Lithium Iron Phosphate Battery Packs
IEEE Transactions on Power Electronics, v. 35, (2), February 2020, article number 8725519, p. 1499-1512
Tang, Xiaopeng; Zou, Changfu; Wik, Torsten; Yao, Ke; Xia, Yongxiao; Wang, Yujie; Yang, Duo; Gao, Furong
多阶段间歇过程无穷时域优化线性二次容错控制
化工学报=CIESC Journal, v. 70, (2), February 2019, p. 541-547
王立敏; 卢丽彬; 高福荣; 周东华
多階段間歇過程無窮時域優化線性二次容錯控制
化工学报 =CIESC Journal, v. 70, (2), 2019, p. 541-547
王立敏; 卢丽彬; 高福荣; 周东华

Book 1

Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model
Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model / by Ridong Zhang, Anke Xue and Furong Gao. Singapore: Springer, 2019.
Zhang, Ridong; Xue, Anke; Gao, Furong

Conference paper 3

A Polytopic Invariant Set Based Iterative Learning Model Predictive Control
IFAC-PapersOnLine, v. 52, (1), 2019, p. 649-654
Lu, Jingyi; Gao, Furong
Battery State of Charge Estimation Based on a Pure Hardware Implementable Method
2018 Joint International Conference on Energy, Ecology and Environment (ICEEE 2018) and International Conference on Electric and Intelligent Vehicles (ICEIV 2018), 2018, article number v. 53
Tang, Xiaopeng; Gao, Furong; Yao, Ke; Wang, Yujie
Predicting Battery Aging Trajectory via a Migrated Aging Model and Bayesian Monte Carlo Method
Energy Procedia, v. 158, February 2019, p. 2456-2461
Tang, Xiaopeng; Yao, Ke; Zou, Changfu; Liu, Boyang; Gao, Furong


Expand All Collapse All


Article 28

A fast estimation algorithm for lithium-ion battery state of health
Journal of Power Sources, v. 369, August 2018, p. 453-458
Tang, Xiaopeng; Zou, Changfu; Yao, Ke; Chen, Guohua; Liu, Boyang; He, Zhenwei; Gao, Furong
A hybrid 2D fault-tolerant controller design for multi-phase batch processes with time delay
Journal of Process Control, v. 69, Septemer 2018, p. 138-157
Shen, Yiteng; Wang, Limin; Yu, Jingxian; Zhang, Ridong; Gao, Furong
A Systematic Min-Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes against Uncertainty
IEEE Transactions on Control Systems Technology, v. 26, (6), November 2018, article number 8036408, p. 2157-2164
Zhang, Ridong; Wu, Sheng; Cao, Zhixing; Lu, Jingyi; Gao, Furong
An Automatic Glucose Monitoring Signal Denoising Method With Noise Level Estimation and Responsive Filter Updating
Biomedical Signal Processing and Control, v. 41, March 2018, p. 172-185
Zhao, Hong; Zhao, C.; Gao, Furong
An incremental Inter-agent learning method for adaptive control of multiple identical processes in mass production
Neurocomputing, v. 315, November 2018, p. 322-344
Qu, Hongyi; Li, Dewei; Zhang, Ridong; Gao, Furong
An Intelligent Non-optimality Self-recovery Method Based on Reinforcement Learning With Small Data in Big Data Era
Chemometrics and Intelligent Laboratory Systems, v. 176, May 2018, p. 89-100
Qin, Yan; Zhao, Chunhui; Gao, Furong
Data Driven Modeling Using an Optimal Principle Component Analysis Based Neural Network and Its Application to a Nonlinear Coke Furnace
Industrial and Engineering Chemistry Research, v. 57, (18), May 2018, p. 6344-6352
Zhang, Ridong; Lv, Qiang; Tao, Jili; Gao, Furong
Delay-Range-Dependent-Based Hybrid Iterative Learning Fault-Tolerant Guaranteed Cost Control for Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 57, (8), February 2018, p. 2932-2944
Wang, Limin; Liu, Bing; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong
Design of Fuzzy Iterative Learning Fault-tolerant Control for Batch Processes with Time-varying Delays
Optimal Control Applications and Methods, v. 39, (6), November 2018, p. 1887-1903
Wang, Limin; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong
Gaussian Process Regression and Bayesian Inference Based Operating Performance Assessment for Multiphase Batch Processes
Industrial & Engineering Chemistry Research, v. 57, (21), May 2018, p. 7232-7244
Liu, Yan; Wang, Xiaojun; Wang, Fuli; Gao, Furong
Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty
Industrial and Engineering Chemistry Research, v. 57, (51), December 2018, p. 17462-17469
Hu, Xiaomin; Wang, Limin; Gao, Furong
Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes
Journal of Shanghai Jiaotong University (Science), v. 23, (6), December 2018, p. 811-819
Wang, Limin; Wang, Runze; Xiong, Yuting; Wang, Haosen; Zhu, Lin; Zhang, Ke; Gao, Furong
Hierarchical multiblock T-PLS based operating performance assessment for plant-wide processes
Industrial and Engineering Chemistry Research, v.57, (43), October 2018, p. 14617-14627
Liu, Yan; Wang, Fuli; Gao, Furong; Cui, Haonan
Hybrid Iterative Learning Fault-tolerant Guaranteed Cost Control Design for Multi-phase Batch Processes
Canadian Journal of Chemical Engineering, v. 96, (2), February 2018, p. 521-530
Wang, Limin; Shen, Yiteng; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong
Improved Nonlinear Quality Estimation for Multiphase Batch Processes Based on Relevance Vector Machine with Neighborhood Component Variable Selection
Industrial and Engineering Chemistry Research, v. 57, (2), January 2018, p. 666-676
Zhu, Jinlin; Gao, Furong
Inner-phase and inter-phase analysis based operating performance assessment and nonoptimal cause identification for multiphase batch processes
Chemical Engineering Research and Design, v. 134, June 2018, p. 292-308
Liu, Yan; Ma, R.; Wang, F.; Chang, Y.; Gao, Furong
Linearity Evaluation and Variable Subset Partition Based Hierarchical Process Modeling and Monitoring
IEEE Transactions on Industrial Electronics, v. 65, (3), March 2018, article number 8017442, p. 2683-2692
Li, Wenqing; Zhao, Chunhui; Gao, Furong
Long-term battery voltage, power, and surface temperature prediction using a model-based extreme learning machine
Energies, v. 11, (1), January 2018, article number 86
Tang, Xiaopeng; Yao, Ke; Liu, Boyang; Hu, Wengui; Gao, Furong
Mixed-effects Gaussian Process Modeling Approach With Application in Injection Molding Processes
Journal of Process Control, v. 62, February 2018, p. 37-43
Luo, Linkai; Yao, Yuan; Gao, Furong; Zhao, Chunhui
Monitoring big process data of industrial plants with multiple operating modes based on hadoop
Journal of the Taiwan Institute of Chemical Engineers, v. 91, October 2018, p. 10-21
Zhu, Jinlin; Yao, Yuan; Li, Dewei; Gao, Furong
Multimodel fractional predictive functional control design with application on an industrial heating furnace
Industrial & Engineering Chemistry Research, v. 57, (42), October 2018, p. 14182-14190
Hu, Xiaomin; Zou, Hongbo; Tao, Jili; Gao, Furong
Nonlinear Monotonically Convergent Iterative Learning Control for Batch Processes
IEEE Transactions on Industrial Electronics, v. 65, (7), July 2018, p. 5826-5836
Lu, Jingyi; Cao, Zhixing; Zhang, Ridong; Gao, Furong
Review and big data perspectives on robust data mining approaches for industrial process modeling with outliers and missing data
Annual Reviews in Control, v. 46, October 2018, p. 107-133
Zhu, Jinlin; Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
Robust Iterative Learning Control for Multi-phase Batch Processes: An Average Dwell-time Method with 2D Convergence Indexes
International Journal of Systems Science, v. 49, (2), January 2018, p. 324-343
Wang, Limin; Shen, Yiteng; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong
Similar batch process monitoring with orthogonal subspace alignment
IEEE Transactions on Industrial Electronics, v. 65, (10), 2018, p. 8173-8183
Zhu, Jinlin; Gao, Furong
Transfer of Qualitative and Quantitative Knowledge for Similar Batch Process Monitoring
IEEE Access, v. 6, 2018, article number 8555549, p. 73856-73870
Zhu, Jinlin; Yao, Yuan; Gao, Furong
Two-directional concurrent strategy of mode identification and sequential phase division for multimode and multiphase batch process monitoring with uneven lengths
Chemical Engineering Science, v. 178, March 2018, p. 104-117
Zhang, Shumei; Zhao, Chunhui; Gao, Furong
半间歇化学反应过程的二维迭代学习PI控制方法
高校化学工程学报=Journal of Chemical Engineering of Chinese Universities, v. 32, (6), December 2018, p. 1403-1411
杨磊; 薄翠梅; 李俊; 金万勤; 高福荣

Conference paper 1

A Tube Feedback Iterative Learning Control for Batch Processes
10th IFAC Symposium on Advanced Control of Chemical Processes (ADCHEM), v. 51, (18), July 2018, p. 785-790
Lu, Jingyi; Cao, Zhixing; Zhang, Ridong; Bo, Cuimei; Gao, Furong


Expand All Collapse All


Article 22

2D Multi-model General Predictive Iterative Learning Control for Semi-batch Reactor with Multiple Reactions
Journal of Central South University, v.24, (11), November 2017, p. 2613-2623
Bo, Cuimei; Yang, Lei; Huang, Qingqing; Li, Jun; Gao, Fu Rong
A Sparse Dissimilarity Analysis Algorithm for Incipient Fault Isolation with No Priori Fault Information
Control Engineering Practice, v. 65, August 2017, p. 70-82
Zhao, Chunhui; Gao, Furong
A Sparse Reconstruction Strategy for Online Fault Diagnosis in Nonstationary Processes with No a Priori Fault Information
Industrial and Engineering Chemistry Research, v. 56, (24), June 2017, p. 6993-7008
Sun, He; Zhang, Shumei; Zhao, Chunhui; Gao, Furong
An improved approach for H-infinity design of linear quadratic tracking control for chemical processes with partial actuator failure
Journal of Process Control, v. 58, October 2017, p. 63-72
Zhang, Ridong; Gao, Furong; Christofides, Panagiotis D.
An Indirect Data-Driven Method for Trajectory Tracking Control of a Class of Nonlinear Discrete-Time Systems
IEEE Transactions on Industrial Electronics, v. 64, (5), May 2017, article number 2617830, p. 4121-4129
Wang, Zhuo; Lu, Renquan; Gao, Furong; Liu, Derong
Critical-to-Fault-Degradation Variable Analysis and Direction Extraction for Online Fault Prognostic
IEEE Transactions on Control Systems Technology, v. 25, (3), May 2017, p. 842-854
Zhao, Chunhui; Gao, Furong
Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace
Journal of Process Control, v. 56, August 2017, p. 13-22
Zhang, Ridong; Zou, Qin; Cao, Zhixing; Gao, Furong
Fractional Order MPC Design Using Improved State Space Model
IFAC-PapersOnLine, v. 50, (1), July 2017, p. 7535-7540
Zou, Qin; Zhang, Junfeng; Zhang, Ridong; Gao, Furong; Xue, Anke
Fuzzy Iterative Learning Control for Batch Processes with Interval Time-Varying Delays
Industrial and Engineering Chemistry Research, v. 56, (14), April 2017, p. 3993-4001
Wang, Limin; Zhu, Chengjie; Yu, Jingxian; Ping, Li; Zhang, Ridong; Gao, Furong
Improved Design of Constrained Model Predictive Tracking Control for Batch Processes Against Unknown Uncertainties
ISA Transactions, v. 69, July 2017, p. 273-280
Wu, Sheng; Jin, Qibing; Zhang, Ridong; Zhang, Junfeng; Gao, Furong
Iterative Learning and Extremum Seeking for Repetitive Time-Varying Mappings
IEEE Transactions on Automatic Control, v. 62, (7), July 2017, article number 7762820, p. 3339-3353
Cao, Zhixing; Duerr, Hans-Bernd; Ebenbauer, Christian; Allgoewer, Frank; Gao, Furong
Iterative Learning Fault-tolerant Control for Injection Molding Processes Against Actuator Faults
Journal of Process Control, v. 59, November 2017, p. 59-72
Wang, Limin; Liu, Fanfan; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong
Iterative Learning Fault-Tolerant Control for Networked Batch Processes with Multirate Sampling and Quantization Effects
Industrial & Engineering Chemistry Research, v. 56, (9), 8 March 2017, p. 2515-2525
Gao, Ming; Sheng, Li; Zhou, Donghua; Gao, Furong
LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System
Industrial and Engineering Chemistry Research, v. 56, (51), December 2017, p. 15102-15111
Fang, Tao; Zhang, Ridong; Gao, Furong
Multimode and Multiphase Batch Processes Understanding and Monitoring Based on Between-Mode Similarity Evaluation and Multimode Discriminative Information Analysis
Industrial and Engineering Chemistry Research, v. 56, (34), 30 August 2017, p. 9679-9690
Qin, Yan; Zhao, Chunhui; Zhang, Shumei; Gao, Furong
Observer Based Battery SOC Estimation: Using Multi-gain-switching Approach
Applied Energy, v.204, Oct 2017, p. 1275-1283
Tang, Xiaopeng; Liu, Boyang; Lv, Zhou; Gao, F.
Online Average-based System Modelling Method for Batch Process
COMPUTERS & CHEMICAL ENGINEERING, v.108, January 2017, p. 128-138
Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong
Robust Iterative Learning Fault-Tolerant Control for Multiphase Batch Processes with Uncertainties
Industrial and Engineering Chemistry Research, v. 56, (36), September 2017, p. 10099-10109
Wang, Limin; Sun, Limei; Yu, Jingxian; Zhang, Ridong; Gao, Furong
State Space Model Predictive Control for Advanced Process Operation: A Review of Recent Development, New Results, and Insight
Industrial and Engineering Chemistry Research, v. 56, (18), May 2017, p. 5360-5394
Zhang, Ridong; Wu, Sheng; Gao, Furong
Subspace Decomposition and Critical Phase Selection Based Cumulative Quality Analysis for Multiphase Batch Processes
Chemical Engineering Science, v. 166, July 2017, p. 130-143
Qin, Yan; Zhao, Chunhui; Wang, Xuezhong; Gao, Furong
基于T-S模糊模型的間歇過程的迭代學習容錯控制
化工學報=CIESC Journal, v. 68, (3), March 2017, p. 1081-1089
王立敏; 楊繼勝; 于晶賢; 李秉蕓; 高福榮
批次过程控制-回顾与展望
自动化学报=Acta Automatica Sinica, v. 43, (6), June 2017, p. 933-943
卢静宜; 曹志兴; 高福荣

Conference paper 6

A Multi-objective Model Predictive Control for Temperature Control in Extrusion Processes
2017 6th International Symposium on Advanced Control of Industrial Processes, AdCONIP 2017, July 2017, article number 7983751, p. 31-36
Lu, Jingyi; Zhang, Ridong; Yao, Ke; Gao, Furong
A Reconstruction Strategy for Fault Diagnosis Based on Fault Direction
Chinese Control Conference, CCC, 2017, article number 8028061, p. 4464-4469
Sun, He; Zhao, Chunhui; Sun, Youxian; Gao, Furong
Phase-based Recursive Regression For Quality Prediction of Multiphase Batch Processes
IEEE International Conference on Control and Automation, August 2017, article number 8003074, p. 283-288
Zhao, Luping; Wang, Fuli; Chang, Yuqing; Wang, Shu; Gao, Furong
Sparse Dissimilarity Analysis Based on Distribution Dissimilarity Decomposition for Online Diagnosis of Incipient Faults
Proceedings of the American Control Conference, June 2017, article number 7963799, p. 5430-5435
Zhao, Chunhui; Wang, Wei; Gao, Furong
State of Charge Estimation of LiFePO₄ Battery Based on a Gain-classifier Observer
Energy Procedia, v. 105, May 2017, p. 2071-2076
Tang, Xiaopeng; Liu, Boyang; Gao, Furong
Subspace decomposition based cumulative quality analysis for multiphase batch processes
2017 6th International Symposium on Advanced Control of Industrial Processes, AdCONIP 2017, July 2017, article number 7983762, p. 95-100
Qin, Yan; Zhao, Chunhui; Gao, Furong


Expand All Collapse All


Article 20

A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace
Industrial and Engineering Chemistry Research, v. 55, (22), June 2016, p. 6465-6474
Zhang, Ridong; Tao, Jili; Gao, Furong
Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems
IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 46, (3), March 2016, article number 7151836, p. 326-333
Wang, Zhuo; Gao, Furong
An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring
AIChE Journal, v. 62, (7), July 2016, p. 2358-2373
Qin, Yan; Zhao, Chunhui; Gao, Furong
Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes
IEEE Transactions on Automatic Control, v. 61, (1), January 2016, article number 7109128, p. 270-275
Cao, Zhixing; Zhang, Ridong; Yang, Yi; Lu, Jingyi; Gao, Furong
Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints
IET Control Theory and Applications, v. 10, (9), June 2016, p. 1018-1026
Lu, Jingyi; Cao, Zhixing; Gao, Furong
Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis
IEEE Transactions on Control Systems Technology, v. 24, (3), May 2016, article number 7295568, p. 928-939
Zhao, Chunhui; Gao, Furong
Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes
Industrial and Engineering Chemistry Research, v. 55, (6), February 2016, p. 1598-1608
Yang, Yi; Cao, Wanlin; Cao, ZhiKai; Zhou, Hua; Gao, Furong; Shi, Jia
Iterative Learning Kalman Filter for Repetitive Processes
Journal of Process Control, v. 46, October 2016, p. 92-104
Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong
New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes
IEEE Transactions on Automatic Control, v. 61, (10), 2016, article number 7339434, p. 3045-3051
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong
Online identification for batch processes in closed loop incorporating priori controller knowledge
Computers and Chemical Engineering, v. 90, July 2016, p. 222-233
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong
Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches
Chemometrics and Intelligent Laboratory Systems, v. 156, 2016, p. 81-88
Zheng, Junhua; Ge, Zhigiang; Song, Zhihuan; Gao, Furong
Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection
Chemometrics and Intelligent Laboratory Systems, v. 158, November 2016, p. 69-79
Guo, Shuo; Yuan, Decheng; Zhang, Ridong; Gao, Furong
Priori Knowledge-Based Online Batch-to-Batch Identification in a Closed Loop and an Application to Injection Molding
Industrial and Engineering Chemistry Research, v. 55, (32), August 2016, p. 8818-8829
Cao, Zhixing; Yang, Yi; Yi, Hui; Gao, Furong
Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes
Industrial & Engineering Chemistry Research, v. 55, (50), December 2016, p. 12896-12908
Zhao, Chunhui; Wang, Wei; Gao, Furong
State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer
Energies, v. 9, (9), September 2016, article number 675
Tang, Xiaopeng; Liu, Boyang; Gao, Furong; Lv, Zhou
Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity
Industrial & Engineering Chemistry Research, v. 55, (51), Dec 2016, p. 13074-13084
Li, Dewei; Xi, Yugeng; Lu, Jingyi; Gao, Furong
The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis
International Journal of Control, v. 90, (12), December 2017, p. 2721-2733
Li, Dewei; Li, Jiwei; Xi, Yugeng; Gao, Furong
Two-time dimensional recursive system identification incorporating priori pole and zero knowledge
Journal of Process Control, v. 39, March 2016, p. 100-110
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong
注塑過程中注射保壓階段最小運行時間控制方法
工程塑料應用=Engineering Plastics Application, v. 44, (4), April 2016, p. 53-56
王立敏; 朱城杰; 于晶賢; 高福榮
集成神经网络与自适应算法的分数阶滑模控制
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v. 33, (10), 2016, p. 1373-1377
张碧陶; 高福荣; 姚科

Book 2

Injection Molding Process Control, Monitoring, and Optimization
Injection Molding Process Control, Monitoring, and Optimization / by Yi Yang, Xi Chen, Ningyun Lu and Furong Gao. Munich: Carl Hanser Verlag GmbH & Co. KG, 2016. Book series: Progress in Polymer Processing.
Yang, Yi; Chen, Xi; Lu, Ningyun; Gao, Furong
间歇过程的过程建模与参数控制
间歇过程的过程建模与参数控制 / 高福荣 著. 北京: 科学出版社, 2016.
高福荣

Conference paper 3

‘State Déjà vu’ Inter-Agent Learning Adaptive Control Framework
IFAC-PapersOnLine, v. 49, (7), June 2016, p. 984-989
Qu, Hongyi; Zhang, Ridong; Gao, Furong
Product Quality Control for Single Screw Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, 2016, p. 870-875
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Lu, Ningyun; Gao, Furong
Stability Evaluation based Non-steady Variable Identification for Online Fault Prognosis
IFAC-PapersOnLine, v. 49, (7), 9 August 2016, p. 699-704
Zhao, C.H.; Wang, Weii; Gao, Furong


Expand All Collapse All


Article 18

A nested-loop Fisher discriminant analysis algorithm
Chemometrics and Intelligent Laboratory Systems, v. 146, July 2015, p. 396-406
Zhao, Chunhui; Gao, Furong
A two-stage design of two-dimensional model predictive iterative learning control for nonrepetitive disturbance attenuation
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5683-5689
Lu, Jingyi; Cao, Zhixing; Wang, Zhuo; Gao, Furong
An improved decoupling structure based state space MPC design with improved performance
Systems and Control Letters, v. 75, 2015, p. 77-83
Zhang, Ridong; Gao, Furong
An Iterative Modeling and Trust-Region Optimization Method for Batch Processes
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3186-3199
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong
Application of Two-Dimensional Predictive Functional Control in Injection Molding
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10088-10102
Yang, Bo; Xu, Zuhua; Yang, Yi; Gao, Furong
Bayesian improved model migration methodology for fast process modeling by incorporating prior information
Chemical Engineering Science, v. 134, September 2015, p. 23-35
Luo, Linkai; Yao, Yuan; Gao, Furong
Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3154-3166
Zhao, Chunhui; Wang, Wei; Qin, Yan; Gao, Furong
Cost-effective process modeling and optimization methodology assisted by robust migration techniques
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5736-5748
Luo, Linkai; Yao, Yuan; Gao, Furong
Delay-range dependent H∞control for uncertain 2D-delayed systems
Numerical Algebra, Control and Optimization, v. 5, (1), 2015, p. 11-23
Wang, Li-Min; Yu, Jing-Xian; Shi, Jia; Gao, Furong
Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure
Journal of Process Control, v. 26, 2015, p. 102-114
Zhang, Ridong; Jin, Qibing; Gao, Furong
Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures
Computers and Chemical Engineering, v. 80, September 2015, p. 130-139
Zhang, Ridong; Gao, Furong
Iterative improvement of parameter estimation for model migration by means of sequential experiments
Computers and Chemical Engineering, v. 73, February 2015, p. 128-140
Luo, Linkai; Yao, Yuan; Gao, Furong
Online fault prognosis with relative deviation analysis and vector autoregressive modeling
Chemical Engineering Science, v. 138, December 2015, p. 531-543
Zhao, Chunhui; Gao, Furong
Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products
Construction and Building Materials, v. 79, March 2015, p. 214-222
Ji, Yong-sheng; Zhan, Guangmei; Tan, Zhongchao; Hu, Yijie; Gao, Furong
Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10020-10030
Li, Wenqing; Zhao, Chun-Hui; Gao, Furong
State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower
IEEE Transactions on Automation Science and Engineering, v. 12, (4), October 2015, article number 6818446, p. 1516-1524
Zhang, Ridong; Cao, Zhixing; Lu, Renquan; Li, Ping; Gao, Furong
Two-time-dimensional model predictive control of weld line positioning in bi-injection molding
Industrial and Engineering Chemistry Research, v. 54, (17), May 2015, p. 4795-4804
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong
基于时序模型迁移的间歇过程监测建模方法
控制与决策=Control and Decision, v. 30, (10), October 2015, p. 1885-1889
刘昊知; 胥布工; 高福荣

Conference paper 9

A fast and effective 2D regulatory control for injection molding process
Annual Technical Conference - ANTEC, Conference Proceedings, 2015, p. 2565-2571
Yang, B.; Yang, Y.; Gao, Furong
A MPC Operation Method for a Photovoltaic System with Batteries
IFAC-PapersOnLine, v. 48, (8), 2015, p. 807-812
Liu, Bing; Lu, Zhou; Yao, Ke; Gao, Furong
A Stable Two-Time Dimensional (2D) Model Predictive Control with Zero Terminal State Constraints for Constrained Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 514-519
Lu, Jingyi; Cao, Zhixing; Gao, Furong
A Variant Fisher Discriminant Analysis Algorithm and its Applicationto Fault Diagnosis
2015 10th Asian Control Conference (ASCC 2015), Institute of Electrical and Electronics Engineers (IEEE), 2015
Wang, Wei; Zhao, Chunhui; Sun, Youxian; Gao, Furong
An information technology way for uplifting polymer processing efficiency
Polymer Process Engineering '15 - UK China Advanced Material Research Institute (PPE '15 - UK China AMRI), University of Bradford, 8-10 September 2015
Gao, Furong
An Information Technology Way for Uplifting Polymer Processing Efficiency
The 12th International Conference of Advanced Molding Technology and Materials Processing (SAMT 2015), Nansha, China, 20-22 November 2015
Gao, Furong
Integrated Optimization Based on Transition Tracking Analysis for Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 272-277
Qin, Yan; Zhao, Chunhui; Gao, Furong
Model Migration through Bayesian Adjustments
IFAC-PapersOnLine, v. 48, (8), 2015, p. 112-116
Luo, Linkai; Gao, Furong
Multi-stage Process Analysis and Modelling based Online Monitoring for Chip Packaging Process
IFAC-PapersOnLine, v. 48, (28), 2015, p. 993-998
Qin, Yan; Zhao, Chunhui; Gao, Furong


Expand All Collapse All


Article 20

Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction
Industrial and Engineering Chemistry Research, v. 53, (40), October 2014, p. 15629-15638
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems
Chinese Journal of Chemical Engineering, v. 22, (7), July 2014, p. 837-841
Bo, Cuimei; Zhang, Ridong; Zhang, Chenghao; Tang, Jihai; Qiao, Xu; Gao, Furong
Constrained two dimensional recursive least squares model identification for batch processes
Journal of Process Control, v. 24, (6), 2014, p. 871-879
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong
Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace
IET Control Theory and Applications, v. 8, (14), 2014, p. 1303-1311
Zhang, Ridong; Cao, Zhixing; Li, Ping; Gao, Furong
Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace
Chemometrics and Intelligent Laboratory Systems, v. 134, May 2014, p. 110-117
Wu, Sheng; Zhang, Ridong; Lu, Renquan; Gao, Furong
Fault-relevant Principal Component Analysis (FPCA) method for multivariate statistical modeling and process monitoring
Chemometrics and Intelligent Laboratory Systems, v. 133, April 2014, p. 1-16
Zhao, Chun Hui; Gao, Furong
GA based predictive functional control for batch processes under actuator faults
Chemometrics and Intelligent Laboratory Systems, v. 137, October 2014, p. 67-73
Zhang, Ridong; Zou, Hongbo; Xue, Anke; Gao, Furong
Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower
Journal of Process Control, v. 24, (3), March 2014, p. 125-132
Zhang, Ridong; Wu, Sheng; Gao, Furong
Inter-batch-evolution-traced process monitoring based on inter-batch mode division for multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 138, December 2014, p. 178-192
Zhao, Luping; Zhao, Chunhui; Gao, Furong
New PID Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3283-3292
Zhang, Ridong; Cao, Zhixing; Bo, Cuimei; Li, Ping; Gao, Furong
Predictive control optimization based PID control for temperature in an industrial surfactant reactor
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 48-62
Zhang, Ridong; Wu, Sheng; Lu, Renquan; Gao, Furong
Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process
Industrial and Engineering Chemistry Research, v. 53, (2), January 2014, p. 723-731
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong
Real-time implementation of improved state-space MPC for air supply in a coke furnace
IEEE Transactions on Industrial Electronics, v. 61, (7), 2014, article number 6616639, p. 3532-3539
Zhang, Ridong; Xue, Anke; Lu, Renquan; Li, Ping; Gao, Furong
Regression modeling and quality prediction for multiphase batch processes with inner-phase analysis
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 1-16
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Separated design of robust model predictive control for LPV systems with periodic disturbance
Journal of Process Control, v. 24, (1), January 2014, p. 250-260
Li, Dewei; Gao, Furong; Xi, Yugeng
State space model predictive fault-tolerant control for batch processes with partial actuator failure
Journal of Process Control, v. 24, (5), 2014, p. 613-620
Zhang, Ridong; Lu, Jingyi; Qu, Hongyi; Gao, Furong
Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 58-67
Zhao, Chunhui; Gao, Furong
Temperature control of industrial coke furnace using novel state space model predictive control
IEEE Transactions on Industrial Informatics, v. 10, (4), November 2014, article number 6881729, p. 2084-2092
Zhang, Ridong; Xue, Anke; Gao, Furong
Temperature Modeling in a Coke Furnace with an Improved RNA-GA Based RBF Network
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3236-3245
Zhang, Ridong; Tao, Jili; Gao, Furong
Two-level PLS model for quality prediction of multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 29-36
Ge, Zhiqiang; Song, Zhihuan; Zhao, Luping; Gao, Furong

Conference paper 17

A Fast 2D Predictive Control Algorithm for Injection Molding process
Asian Workshop on Polymer Processing 2014, Kenting, Taiwan, 17-20 November 2014
Yang, Bo; Yang, Yi; Gao, Furong
A Repetitiveness Index-based Adaptive Two Dimensional Iterative Learning Model Predictive Control
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 19, 2014, p. 3092-3097
Lu, Jingyi; Cao, Zhixing; Gao, Furong
A Two-Dimensional Iterative Learning Model Predictive Control Method for Injection Molding Based on Mixed Integer Quadratic Programming
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2311-2316
Cao, Zhixing; Lu, Jingyi; Gao, Furong
Batch process control: from continuous approaches to 2D methods
2014 Workshop on Learning Control, Qingdao, China, 25-27 April 2014
Gao, Furong; Mo, Shengyong; Yang, Yi; Yao, Ke
Batch Process Control: from continuous approaches to 2-time dimensional control
The 25th Chinese Process Control Conference (CPCC), Dalian, China, 9-11 August 2014
Gao, Furong
Control in Polymer Processing for Key Processes and Their Peripherals
The 11th SAMT Annual Conference, Dalian, China, 23-25 July 2014
Gao, Furong; Yang, Yi
Delay-range-dependent Robust BIBO Stabilization of 2D Discrete Delayed Systems Via LMI Approach
IFAC Proceedings Volumes, v. 19, 2014, p. 10994-10999
Wang, Limin; Chen, Xi; Gao, Furong
Development of a Capacitive Transducer for Dimensions Prediction in Polymer Extrusion
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, January 2014, p. 2259-2264
Cheng, Yu; Fung, Ka Tsai; Gao, Furong
Energy-Saving Based Allocated Generalized Predictive Control (AGPC) in Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), January 2014, p. 2265-2270
Gao, Furong; Jiang, Zhijiang; Mo, Shengyong; Yang, Yi
From Single Batch Process Control to Multiple Batch Processes Control: A Review and a Perspective for Injection Molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2271-2276
Cao, Zhixin; Gao, Furong; Lu, Jingyi; Yang, Yi
Intra-Batch Evolution Based Process Monitoring for Multiphase Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 47, (3), 2014, p. 6680-6685
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Iterative Optimization for Batch Processes Through Online Modelling
IFAC Proceedings Volumes, v. 19, 2014, p. 10455-10450
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong
Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model
2014 Seventh International Symposium on Computational Intelligence and Design (ISCID 2014), Institute of Electrical and Electronics Engineers (IEEE), 2014, p. 399-402
Liu, Haozhi; Xu, Bugong; Gao, Furong
Monitoring of Polymer Processing Processes and Technology
2014 Asian Workshop on Polymer Processing (2014 AWPP), Kenting, Taiwan, 17-21 November 2014
Gao, Furong
Two Dimensional Predictive Functional Control for Injection Molding Process
Society of Plastics Engineering, ANTEC 2014, v. 3, (January), 2014, p. 2305-2310
Yang, Bo; Yang, Yi; Shi, Jia; Gao, Furong
Two-Time Dimensional Hybrid Dynamic Matrix Control for Injection Molding Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2317-2322
Mo, Shengyong; Jiang, Zhijun; Yang, Yi; Gao, Furong
注塑机控制的智能化发展
CAE Molding Solution Alliance Conference 2014, Dongguan, 20-21 March 2014
Gao, Furong


Expand All Collapse All


Article 21

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes
Chinese Journal of Chemical Engineering, v. 21, (4), April 2013, p. 401-411
Wang, Limin; Chen, Xi; Gao, Furong
Between‐phase calibration modeling and transition analysis for phase‐based quality interpretation and prediction
AIChE Journal, v. 59, (1), January 2013, p. 108-119
Zhao, Chunhui; Gao, Furong; Sun, Youxian
Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System
Industrial and Engineering Chemistry Research, v. 52, (49), December 2013, p. 17465-17474
Bo, Cuimei; Tang, Jihai; Cui, Mifen; Feng, Kangkang; Qiao, Xu; Gao, Furong
Delay-range-dependent guaranteed cost control for batch processes with state delay
AIChE Journal, v. 59, (6), June 2013, p. 2033-2045
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi
Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (7), February 2013, p. 2661-2671
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi
Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties
Journal of Process Control, v. 23, (5), June 2013, p. 715-730
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi
H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays
Control Engineering Practice, v. 21, (10), October 2013, p. 1321-1333
Wang, Limin; Mo, Shengyong; Qu, Hongyi; Zhou, Donghua; Gao, Furong
Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes
AIChE Journal, v. 59, (3), March 2013, p. 772-779
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (15), April 2013, p. 5507-5511
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong; Wang, Peiliang
Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (12), March 2013, p. 4586-4596
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Multiset Independent Component Regression (MsICR) Based Statistical Data Analysis and Calibration Modeling
Industrial and Engineering Chemistry Research, v. 52, (8), 2013, p. 2917-2924
Zhao, Chunhui; Gao, Furong
Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace
Chemical Engineering Science, v. 94, May 2013, p. 30-43
Zhang, Ridong; Gao, Furong
New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure
Industrial and Engineering Chemistry Research, v. 52, (46), November 2013, p. 16294-16300
Zhang, Ridong; Gan, Liangzhi; Lu, Jingyi; Gao, Furong
Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (18), May 2013, p. 6182-6192
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong
Review of Recent Research on Data-Based Process Monitoring
Industrial and Engineering Chemistry Research, v. 52, (10), March 2013, p. 3543-3562
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 979-984
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 817-829
Zhang, Ridong; Gao, Furong
Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (41), October 2013, p. 14613-14626
Zhao, Chunhui; Gao, Furong
Synthesis of Dynamic Output Feedback RMPC with Saturated Inputs
Automatica, v. 49, (4), April 2013, p. 949-954
Li, Dewei; Xi, Yugeng; Gao, Furong
Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions
Journal of Environmental Engineering (United States), v. 139, (7), July 2013, p. 1004-1016
Qin, Xusong; Yang, Bin; Gao, Furong; Chen, Guohua
基于2維性能參考模型的2維模型預測迭代學習控制策略
自動化學報. =Acta Automatica Sinica, v. 39, (5), May 2013, p. 565-573
師佳; 江青茵; 曹志凱; 周華; 高福榮

Book 1

迭代学习控制的二维模型理论及其应用
迭代学习控制的二维模型理论及其应用 / 王友清，周东华，高福荣. 北京: 科学出版社, 2013
王友清; 周东华; 高福荣

Book chapter 1

Feedback Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Editor: Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 313-337
Yang, Yi; Gao, Furong

Conference paper 9

A PID-type Model Predictive Iterative Learning Control for Injection Molding Process
Society of Plastics Engineers, Annual Technical Conference, ANTEC 2013, Cincinnati, Ohio, USA, April 21-24 2013, p. 2229-2234
Shi, Jia; Yang, Yi; Gao, Furong
From One Dimensional to Two Dimensional Hybrid Control of Injection Molding Process
9th World Congress of Chemical Engineering, Seoul, Korea, 18-23 August 2013
Gao, Furong; Yang, Yi; Mo, Shengyong
Injection Molding: From Single Machine to Plant-Wide Intelligent Control
The 13th Pacific Polymer Conference (PPC 13), Kaohsiung, Taiwan, 17-22 November 2013
Gao, Furong
Inner-Phase-Evolution-Traced Statistical Modeling and Online Monitoring for Uneven Batch Processes
IEEE International Conference on Control and Automation, 2013, article number 6564919, p. 294-299
Zhao, Luping; Zhao, Chunhui; Gao, Furong
New Approaches of 2D Recursive Least Squares System Identification for Batch Processes
ANTEC 2013 - Proceedings of the Technical Conference & Exhibition, Society of Plastics Engineers, 2013, p. 443-448
Cao, Zhixing; Yang, Yi; Gao, Furong
Quality-related Inner-phase Evolution Analysis and Quality Prediction for Uneven Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 10, (PART 1), 2013, p. 517-522
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Quality-relevant Fault Diagnosis with Concurrent Phase Partition and Analysis of Relative Changes for Multiphase Batch Processes
24th China Process Control Conference
Zhao, Chunhui; Sun, Youxian; Gao, Furong
Rejection of Periodic Disturbances Based on Adaptive Repetitive Model Predictive Control
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 768-773
Lu, Jingyi; Li, Dewei; Cao, Zhixing; Gao, Furong
Two Dimensional Recursive Least Squares for Batch Processes System Identification
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 780-784
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong


Expand All Collapse All


Article 19

4th Symposium on advanced control of industrial processes (Adconip)
Asia-Pacific Journal of Chemical Engineering, v. 7, (5), 2012, Sep, p. 633-634
Xie, Lei; Gao, Furong; Huang, Biao
A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis
Industrial and Engineering Chemistry Research, v. 51, (34), 2012, Aug, p. 11207-11217
Zhao, Chunhui; Sun, Youxian; Gao, Furong
Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes
AIChE journal, v. 58, (9), September 2012, p. 2682-2696
Zhao, Chunhui; Gao, Furong
Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes
Acta Automatica Sinica, v.39, (5), 2013, p. 487-493
Zhao, Chun-Hui; Li, Wen-Qing; Sun, You-Xian; Gao, Fu-Rong
Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations
The Canadian journal of chemical engineering, v. 90, (6), December 2012, p. 1383-1392
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong
Nonlinear quality prediction for multiphase batch processes
AIChE journal, v. 58, (6), June 2012, p. 1778-1787
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
Overall Control System for Injection Molding Process
International polymer processing, v. 27, (1), March 2012, p. 40-59
Yang, Yi; Yao, K.; Gao, Furong
Partially Decoupled Approach of Extended Non-minimal State Space Predictive Functional Control for MIMO Processes
Journal of process control, v. 22, (5), June 2012, p. 837-851
Zhang, Ridong; Xue, Anke; Wang, Shuding; Zhang, Jianming; Gao, Furong
Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model
Chinese Journal of Chemical Engineering, v. 20, (6), 2012, Dec, p. 1121-1127
Dong, Weiwei; Yao, Yuan; Gao, Furong
Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes
23rd Chinese Process Control Conference (CPCC), Chinese Journal of Chemical Engineering, Xiamen, China, v.20, (6), 2012, Dec, p. 1191-1197
Zhao, Luping; Zhao, Chunhui; Gao, Furong
Polymer Extrusion: From Control System Design to Product Quality
Industrial & engineering chemistry research, v. 51, (45), November 2012, p. 14759-14770
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Yao, Ke; Gao, Furong
Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures
Journal of process control, v. 22, (7), August 2012, p. 1273-1286
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi
Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction
AIChE journal, v. 58, (2), 2012, p. 466-479
Zhao, Chunhui; Gao, Furong
Statistical modeling and online monitoring based on between-set regression analysis
Industrial and Engineering Chemistry Research, v. 51, (25), 2012, June, p. 8495-8509
Zhao, Chunhui; Gao, Furong; Sun, Youxian
Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data
Industrial & engineering chemistry research, v. 51, (35), September 2012, p. 11409-11416
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong
Two-step multiset regression analysis (MsRA) algorithm
Industrial & engineering chemistry research, v. 51, (3), 2012, p. 1337-1354
Zhao, Chunhui; Gao, Furong
Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty
Journal of process control, v. 22, (5), June 2012, p. 899-914
Mo, Shengyong; Wang, Limin; Yao, Yuan; Gao, Furong
Utilizing transition information in online quality prediction of multiphase batch processes
Journal of process control, v. 22, (3), 2012, p. 599-611
Ge, Zhiqiang; Zhao, Luping; Yao, Yuan; Song, Zhihuan; Gao, Furong
Wastewater Quality Monitoring System Using Sensor Fusion and Machine Learning Techniques
Water Research, v. 46, (4), 2012, p. 1133-1144
Qin, Xusong; Gao, Furong; Chen, Guohua

Book 1

Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods
Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods / Tao Liu, Furong Gao. London; New York : Springer, c2012
Liu, Tao; Gao, Furong

Book chapter 15

Batch process control
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 12, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Cascade control system
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 321-347, Ch. 9, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Concluding Remarks
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 453-456, Ch. 13, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Control of single-input-single-output (SISO) processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 7, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Decoupling control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 369-431, Ch. 11, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Direct Quality Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 377-390
Yang, Yi; Gao, Furong
Learning Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 339-353
Yang, Yi; Gao, Furong
Multiloop control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 349-368, Ch. 10, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Multivariate Statistical Process Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 335-376
Yao, Yuan; Gao, Furong
Relay feedback identification of integrating processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 197-216, Ch. 5, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Relay feedback identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 119-196, Ch. 4, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Relay Feedback Identification of Unstable Processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 217-240, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Step response identification of integrating and unstable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 85-117, Ch. 3, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Step response identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 13-84, Ch. 2, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong
Two-degrees-of-freedom (2DOF) control of SISO processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 279-319, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong

Conference paper 8

Application of Advanced Control Algorithms in Injection Molding
The 28th International Conference of the Polymer Processing Society (PPS-28), Pattaya, Thailand, 11-15 December, 2012
Yang, Yi; Gao, Furong
Batch Process Control, From Traditional Approaches to 2D Control
2012 12th International Conference on Control, Automation and Systems, 2012, article number 639323, p. 529-532
Yang, Yi; Mo, Shengyong; Gao, Furong
Between-phase transition analysis for phase-based quality prediction
2012 24th Chinese Control and Decision Conference (CCDC), Taiyuan, China, 23-25 May 2012
Zhao, Chunhui; Sun, Youxian; Gao, Furong
Injection velocity control using 2D model predictive iterative learning algorithm
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2155-2160
Yang, Yi; Shi, Jia; Gao, Furong
Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring
2012 SAMT International Conference, Hangzhou, 22-24 August, 2012
Yang, Yi; Gao, Furong
Multivariate statistical analysis methods to investigate interindividual glucose dynamics for subjects with type 1 diabetes mellitus
Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Beijing, China, 2012, Article number 6359424, p. 4989-4994
Zhao, Chun Hui; Sun, Youxian; Gao, Furong
Polymer extrusion control system design
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2187-2196
Jiang, Zhijun; Yan, Yongze; Gao, Furong
Robust iterative learning control with quadratic performance index
Industrial & engineering chemistry research, v. 51, (2), 2012, p. 872-881
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong


Expand All Collapse All


Article 14

A Bidirectional Between-Set Statistical Analysis Method and Its Applications
AIChE journal, v. 57, (5), May 2011, p. 1233-1249
Zhao, Chunhui; Gao, Furong
A two-step basis vector extraction strategy for multiset variable correlation analysis
Chemometrics and intelligent laboratory systems, v. 107, (1), May 2011, p. 147-154
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli
Batch process monitoring based on support vector data description method
Journal of process control, v. 21, (6), July 2011, p. 949-959
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan
Bayesian migration of Gaussian process regression for rapid process modeling and optimization
Chemical engineering journal, v. 166, (3), February 2011, p. 1095-1103
Yan, Wenjin; Hu, Shuangquan; Yang, Yanhui; Gao, Furong; Chen, Tao
Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics
ISA transactions, v. 50, (2), 2011, p. 239-248
Liu, Tao; Gao, Furong
Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes
AIChE journal, v. 57, (2), February 2011, p. 388-403
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli
Mixture probabilistic PCR model for soft sensing of multimode processes
Chemometrics and intelligent laboratory systems, v. 105, (1), January 2011, p. 91-105
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan
Multiphase calibration modeling and quality interpretation by priority sorting
Chemical engineering science, v. 66, (21), November 2011, p. 5400-5409
Zhao, Chunhui; Gao, Furong
Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms
Industrial & engineering chemistry research, v. 50, (23), 2011, p. 13427-13434
Wang, Youqing; Tuo, Jianyong; Zhao, Zhong; Gao, Furong
Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost
Industrial & engineering chemistry research, v. 50, (5), March 2011, p. 2994-3003
Kong, Xiangsong; Yang, Yi; Chen, Xi; Shao, Zhijiang; Gao, Furong
Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays
Journal of process control, v. 21, (7), August 2011, p. 987-996
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong
Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy
AIChE journal, v. 57, (5), May 2011, p. 1202-1215
Zhao, Chunhui; Gao, Furong; Wang, Fuli
Statistical analysis and online monitoring for handling multiphase batch processes with varying durations
Journal of process control, v. 21, (6), July 2011, p. 817-829
Zhao, Chunhui; Mo, Shengyong; Gao, Furong; Lu, Ningyun; Yao, Yuan
Two-dimensional Bayesian monitoring method for nonlinear multimode processes
Chemical engineering science, v. 66, (21), November 2011, p. 5173-5183
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan

Conference paper 3

GPC control of hot-runner temperature in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2011, p. 2426-2430
Zhou, Feng; Yang, Yi; Gao, Furong
Improved two-dimensional dynamic batch process monitoring with support vector data description
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 18, (PART 1), 2011, p. 13133-13138
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan
Multivariate statistical monitoring of multiphase batch processes with uneven operation durations
2011 4th International Symposium on Advanced Control of Industrial Processes, ADCONIP 2011, Hangzhou, China, 2011, p. 54-59
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong


Expand All Collapse All


Article 18

A frequency domain step response identification method for continuous-time processes with time delay
Journal of process control, v. 20, (7), 2010, AUG, p. 800-809
Liu, Tao; Gao, Furong
A novel mechatronic design of a 3D laser scanning system
International journal of advanced mechatronic systems, v. 2, (1-2), 2010, p. 124-131
Ma, Zi; Wang, Yang; Li, Aiguo; Gao, Furong; Zhu, Quanmin
A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data
AIChE journal, v. 56, (1), 2010, JAN, p. 196-206
Zhao, Chunhui; Gao, Furong; Yao, Yuan; Wang, Fuli
An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure
AIChE journal, v. 56, (6), 2010, JUN, p. 1519-1535
Zhao, Chunhui; Gao, Furong; Wang, Fuli
Automatic Velocity Profile Determination for Uniform Filling in Injection Molding
Polymer engineering and science, v. 50, (7), 2010, JUL, p. 1358-1371
Chen, Xi; Zhang, Lei; Kong, Xiangsong; Lu, Junde; Gao, Furong
Closed-loop step response identification of integrating and unstable processes
Chemical engineering science, v. 65, (10), 2010, MAY 15, p. 2884-2895
Liu, Tao; Gao, Furong
Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution
Journal of Applied Electrochemistry, v. 40, (10), 2010, OCT, p. 1797-1805
Qin, Xusong; Gao, Furong; Chen, Guohua
IMC-based iterative learning control for batch processes with uncertain time delay
Journal of process control, v. 20, (1), 2010, JAN, p. 173-180
Liu, Tao; Gao, Furong; Wang, Youqing
Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis
Industrial & engineering chemistry research, v. 49, (18), 2010, SEP 15, p. 8694-8704
Zhao, Chunhui; Gao, Furong
Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem
Control engineering practice, v. 18, (1), 2010, JAN, p. 67-76
Xue, Yali; Li, Donghai; Gao, Furong
Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information
Journal of Process Control, v. 20, (10), 2010, p. 1188-1197
Yao, Yuan; Chen, Tao; Gao, Furong
New insight into internal model control filter design for load disturbance rejection
IET CONTROL THEORY AND APPLICATIONS, v. 4, (3), 2010, MAR, p. 448-460
Liu, Tao; Gao, Furong
Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring
Industrial & engineering chemistry research, v. 49, (2), 2010, JAN 20, p. 669-681
Zhao, Chunhui; Gao, Furong; Wang, Fuli
Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties
Chemical Engineering Science, v. 65, (23), 2010, p. 6134-6144
Liu, Tao; Gao, Furong
Statistical analysis and online monitoring for multimode processes with between-mode transitions
Chemical engineering science, v. 65, (22), 2010, NOV 15, p. 5961-5975
Zhao, Chunhui; Yao, Yuan; Gao, Furong; Wang, Fuli
Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information
Industrial & engineering chemistry research, v. 49, (20), 2010, OCT 20, p. 9961-9969
Yao, Yuan; Gao, Furong
Step response identification under inherent-type load disturbance with application to injection molding
Industrial and Engineering Chemistry Research, v. 49, (22), 2010, p. 11572-11581
Liu, Tao; Zhou, Feng; Yang, Yi; Gao, Furong
基于时段的间歇过程统计建模、在线监测及质量预报
自动化学报=Acta Automatica Sinica, v. 36, (3), March 2010, p. 366-374
趙春暉; 王福利; 姚遠; 高福榮

Book 1

Advanced Process Identification and Control
Advanced Process Identification and Control / Springer, 2010, 13 chapters
Liu, Tao; Gao, Furong

Conference paper 10

Control System for Injection Molding Process
7th International Conference on Advanced Molding and Materials Processing Technology, Wuhan, China, Vol. 1, pp. 113-133, Sept 10-12, (2010)
Yang, Yi; Yao, ke; Gao, Furong
Design of an advanced injection molding control system
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 553-557
Yang, Y.; Yao, K.; Gao, F.
Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 67-72
Liu, Tao; Gao, Furong
Extruder Temperature Control Using Multivariable Generalized Predictive Control
7th International Conference on Advanced Molding and Materials Processing Technology, Vol. 1, pp. 106-112, Sept 10-12, (2010)
Jiang, Zhijun; Yang, Yi; Gao, Furong
FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, ~ July 4-8, 2010 Banff (Canada)
Yao, ke; Gao, Furong
Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 355-360
Zhao, Chunhui; Gao, Furong
INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, July 4-8, 2010 Banff (Canada)
Shi, Jia; Yang, Yi; Gao, Furong
Injection molding process monitoring and control
2010 先進精密模具設備及檢測, 清雲科技大學，台灣, 9 April, 2010
Gao, Furong
On-line in-mold transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 571-575
Yao, Ke; Yang, Yi; Zhou, Feng; Gao, Furong
The applications of multivariate statistical methods in injection molding process monitoring
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 565-570
Yao, Yuan; Yang, Yi; Yao, Ke; Gao, Furong


Expand All Collapse All


Article 15

A generalized relay identification method for time delay and non-minimum phase processes
Automatica, v. 45, (4), 2009, APR, p. 1072-1079
Liu, Tao; Gao, Furong
A survey on multistage/multiphase statistical modeling methods for batch processes
Annual reviews in control, v. 33, (2), 2009, DEC, p. 172-183
Yao, Yuan; Gao, Furong
Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance
Industrial & engineering chemistry research, v. 48, (24), 2009, DEC 16, p. 11060-11070
Yao, Yuan; Zhao, Chunhui; Gao, Furong
Covariance-oriented qualitative and quantitative calibration analysis for multistage batch processes
Canadian Journal of Chemical Engineering, v.87, (3), 2009, Jun, p. 466-476
Zhao, Chunhui; Wang, Fuli; Gao, Furong
Generalized predictive control of linear systems with actuator arrearage faults
Journal of process control, v. 19, (5), 2009, MAY, p. 803-815
Wang, Youqing; Zhou, Donghua; Gao, Furong
Identification and Autotuning of Temperature-Control System With Application to Injection Molding
IEEE transactions on control systems technology, v. 17, (6), 2009, NOV, p. 1282-1294
Liu, Tao; Yao, Ke; Gao, Furong
Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction
Chemometrics and intelligent laboratory systems, v. 95, (2), 2009, FEB 15, p. 107-121
Zhao, Chunhui; Wang, Fuh; Gao, Furong
In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding
International polymer processing, v. 24, (3), 2009, JUL, p. 253-260
Zhou, Feng; Yao, Ke; Chen, Xiaohong; Gao, Furong
Model Migration for Development of a New Process Model
Industrial & engineering chemistry research, v. 48, (21), 2009, NOV 4, p. 9603-9610
Lu, Junde; Yao, Yuan; Gao, Furong
Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes
Journal of process control, v. 19, (10), 2009, DEC, p. 1716-1724
Yao, Yuan; Gao, Furong
Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)
Industrial & engineering chemistry research, v. 48, (20), 2009, OCT 21, p. 9163-9174
Zhao, Chunhui; Gao, Furong; Wang, Fuli
Phase and transition based batch process modeling and online monitoring
Journal of process control, v. 19, (5), 2009, MAY, p. 816-826
Yao, Yuan; Gao, Furong
Process Similarity and Developing New Process Models Through Migration
AIChE journal, v. 55, (9), 2009, SEP, p. 2318-2328
Lu, Junde; Yao, Ke; Gao, Furong
Survey on iterative learning control, repetitive control, and run-to-run control
Journal of process control, v. 19, (10), 2009, DEC, p. 1589-1600
Wang, Youqing; Gao, Furong; Doyle, III, Francis J.
Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region
Industrial & engineering chemistry research, v. 48, (2), 2009, JAN 21, p. 837-843
Yao, Yuan; Diao, Yinghu; Lu, Ningyun; Lu, Junde; Gao, Furong

Book chapter 1

Injection Molding Control
Injection molding: technology and fundamentals / Edited by Musa R. Kamal, AvramI. Isayev, Shih-Jung Liu. Munich : Hanser, 2009, p. 0-926
Gao, Furong; Yang, Yi

Conference paper 11

A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 1746-1751
Shi, Jia; Gao, Furong; Jiang, Qingying; Cao, Zikai
An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 893-898
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli
Batch process control from practice to 2D model predictive control
2009 Chinese Control and Decision Conference, CCDC 2009, 2009
Yao, Ke; Yang, Yi; Gao, Furong
Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, pp. 999-1004, Vol. 2, July 12-15, 2009, Istanbul, Turkey
Yao, Yuan; Gao, Furong
Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques
The 8th World Congress of Chemical Engineering, Montreal, 23-27 August, 2009
Qin, Xusong; Gao, Furong; Chen, Guohua
Fault-tolerant control for batch processes - Overview and outlook
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 908-913
Wang, Youqing; Zhou, Donghua; Gao, Furong
Identification of low-order process model with time delay from closed-loop step test
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 2587-2591
Liu, Tao; Gao, Furong; Zhao, Chunhui
Identification of low-order unstable process model from closed-loop step test
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, v.7, (1), 2009, p. 447-451, July, Istanbul, Turkey
Liu, Tao; Gao, Furong
Identification of time delay model for integrating processes from closed-loop step test
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 615-619
Liu, Tao; Gao, Furong; Zhao, Chunhui
Improved independent component regression modeling
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 1507-1512
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli
Iterative learning control of mold-open position in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 5, 2009, p. 2946-2950
Mo, Shengyong; Yang, Yi; Gao, Furong


Expand All Collapse All


Article 14

A systematic approach for on-line identification of second-order process model from relay feedback test
AIChE journal, v. 54, (6), 2008, JUN, p. 1560-1578
Liu, Tao; Gao, Furong; Wang, Youqing
Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test
Industrial & engineering chemistry research, v. 47, (4), 2008, FEB 20, p. 1140-1149
Liu, Tao; Gao, Furong
Barrel temperature control during operation transition in injection molding
Control engineering practice, v. 16, (11), 2008, NOV, p. 1259-1264
Yao, Ke; Gao, Furong; Allgoewer, Frank
Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding
Sensors and Actuators a-physical, v. 141, (2), 2008, FEB 15, p. 712-722
Wong, Ho Yin; Fung, Ka Tsai; Gao, Furong
Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes
Industrial & engineering chemistry research, v. 47, (24), 2008, DEC 17, p. 9996-10008
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Zhang, Yingwei
Identification of integrating and unstable processes from relay feedback
Computers & chemical engineering, v. 32, (12), 2008, DEC 22, p. 3038-3056
Liu, Tao; Gao, Furong
Injection Molding Control: From Single Cycle to Batch Control
Advances in polymer technology, v. 27, (4), 2008, WIN, p. 217-223
Yang, Yi; Yao, Ke; Gao, Furong
Iterative learning model predictive control for multi-phase batch processes
Journal of process control, v. 18, (6), 2008, JUL, p. 543-557
Wang, Youqing; Zhou, Donghua; Gao, Furong
Iterative learning reliable control of batch processes with sensor faults
Chemical engineering science, v. 63, (4), 2008, FEB, p. 1039-1051
Wang, Youqing; Zhou, Donghua; Gao, Furong
Model Migration with Inclusive Similarity for Development of a New Process Model
Industrial & engineering chemistry research, v. 47, (23), 2008, DEC 3, p. 9508-9516
Lu, Junde; Gao, Furong
Process Modeling based on process similarity
Industrial & engineering chemistry research, v. 47, (6), 2008, MAR 19, p. 1967-1974
Lu, Junde; Gao, Furong
Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance
IEEE transactions on automatic control, v. 53, (11), 2008, DEC, p. 2690-2695
Liu, Tao; Gao, Furong
Subspace identification for two-dimensional dynamic batch process statistical monitoring
Chemical engineering science, v. 63, (13), 2008, JUL, p. 3411-3418
Yao, Yuan; Gao, Furong
Variable structure control for a class of nonlinear systems with mismatched uncertainties
Applied mathematics and computation, v. 200, (1), 2008, JUN 15, p. 387-400
Wang, Youqing; Jiang, Canghua; Zhou, Donghua; Gao, Furong

Conference paper 6

An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model
18th INTERNATIONAL CONGRESS OF CHEMICAL AND PROCESS ENGINEERING, Vol. 4, p1332, 24-28 AUGUST 2008, PRAGUE, CZECH REPUBLIC
Zhang, Lei; Chen, Xi; Gao, Furong
Barrel Temperature Control in Injection Moulding Process
Symposium on Advanced Molding Technology and Materials Processing, SANTMP'08, Beijing, China. 16-17 November, 2008
Yao, Ke; Yang, Yi; Gao, Furong
Injection moulding control and optimization: from applied research to academic research
北京自動化學會年會, 15 November, 2008. Beijing University of Science and Technology, Beijing
Gao, Furong
Multi-phase batch process monitoring
中國國家自然科學基金委雙清論壇, 北京西郊賓館, 4－7 November, 2008
Gao, Furong
Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 10933-10938
Liu, Tao; Gao, Furong
Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 4499-4510
Yao, Yuan; Gao, Furong


Expand All Collapse All


Article 11

Active fault-tolerant control of nonlinear batch processes with sensor faults
Industrial & engineering chemistry research, v. 46, (26), 2007, DEC 19, p. 9158-9169
Wang, Youqing; Yang, Yi; Zhou, Donghua; Gao, Furong
Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data
Industrial and Engineering Chemistry Research, v. 46, (14), 2007, p. 4943-4953
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Lu, Ningyun; Jia, Mingxing
Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays
Journal of process control, v. 17, (2), 2007, FEB, p. 173-188
Liu, Tao; Zhang, Weidong; Gao, Furong
Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays
Industrial & engineering chemistry research, v. 46, (20), 2007, SEP 26, p. 6546-6557
Liu, Tao; Zhang, Weidong; Gao, Furong
Application of a capacitive transducer for online part weight prediction and fault detection in injection molding
Polymer engineering and science, v. 47, (4), 2007, APR, p. 347-353
Fung, Ka Tsai; Gao, Furong; Chen, Xi
Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)
Industrial & engineering chemistry research, v. 46, (24), 2007, NOV 21, p. 8033-8043
Yao, Yuan; Gao, Furong
Optimal start-up control of injection molding barrel temperature
Polymer engineering and science, v. 47, (3), 2007, MAR, p. 254-261
Yao, Ke; Gao, Furong
Optimization of decentralized PI/PID controllers based on genetic algorithm
Asian journal of control, v. 9, (3), 2007, SEP, p. 306-316
Li, Donghai; Gao, Furong; Xue, Yali; Lu, Chongde
Robust fault-tolerant control of a class of non-minimum phase nonlinear processes
Journal of process control, v. 17, (6), 2007, JUL, p. 523-537
Wang, Youqing; Zhou, Donghua; Gao, Furong
Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes
Journal of process control, v. 17, (9), 2007, OCT, p. 715-727
Shi, Jia; Gao, Furong; Wu, Tie-Jun
新型注塑螺杆性能研究
塑料工業=China Plastics Industry, v. 2007, (6), 2007, p. 23-25
金志明; 高福榮

Conference paper 5

Batch Process Modeling Based on Process Similarity
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, 6-8 June, 2007, Vol. 2, pp. 379-384, 6-8 June, 2007
Lu, Junde; Gao, Furong
Control of Multi-Phase Batch Processes: Formulation and Challenge
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 339-344, 6-8 June, 2007
Wang, Youqing; Yang, Yi; Gao, Furong; Zhou, Donghua
Electrocoagulation and Electroflotation of Restaurant Wastewater – Pilot Plant Study
Advanced Technologies for Environmental Remediation – A Symposium in Honour of Professor Po Lock Yue, Hong Kong, June 15, 2007.
Qin, Xusong; Gao, Furong; Chen, Guohua
Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 243-248, 6-8 June, 2007
Shi, Jia; Gao, Furong
Two-Dimensional Dynamic PCA with Auto-Selected Support Region
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 1, pp. 69-74, 6-8 June, 2007
Yao, Yuan; Lu, Ningyun; Gao, Furong


Expand All Collapse All


Article 11

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4603-4616
Shi, Jia; Gao, Furong; Wu, Tie-Jun
From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4617-4628
Shi, Jia; Gao, Furong; Wu, Tie-Jun
Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model
Polymer engineering and science, v. 46, (4), 2006, APR, p. 540-548
Yang, Yi; Gao, Furong
Iterative learning fault-tolerant control for batch processes
Industrial & engineering chemistry research, v. 45, (26), 2006, DEC 20, p. 9050-9060
Wang, Youqing; Shi, Jia; Zhou, Donghua; Gao, Furong
Kernel classifier with adaptive structure and fixed memory for process diagnosis
AIChE journal, v. 52, (10), 2006, OCT, p. 3515-3531
Wang, Haiqing; Li, Ping; Gao, Furong; Song, Zhihuan; Ding, Steven X.
Profiling of injection velocity for uniform mold filling
Advances in polymer technology, v. 25, (1), 2006, SPR, p. 13-21
Chen, Xi; Gao, Furong
Robust fault detection and isolation for uncertain linear retarded systems
Asian journal of control, v. 8, (2), 2006, JUN, p. 141-152
Jiang, Canghua; Zhou, Donghua; Gao, Furong
Robust iterative learning control design for batch processes with uncertain perturbations and initialization
AIChE journal, v. 52, (6), 2006, JUN, p. 2171-2187
Shi, Jia; Gao, Furong; Wu, Tie-Jun
Stage-based online quality control for batch processes
Industrial & engineering chemistry research, v. 45, (7), 2006, MAR 29, p. 2272-2280
Lu, Ningyun; Gao, Furong
Statistical modeling and online monitoring for batch processes
Zidonghua Xuebao/Acta Automatica Sinica, v. 32, (3), 2006, p. 400-410
Lu, Ningyun; Wang, Fuli; Gao, Furong; Wang, Shu
间歇过程的统计建模与在线监测
自动化学报, v. 32, (3), May 2006, p. 400-410
陆宁云; 王福利; 高福荣; 王姝

Conference paper 7

2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 215-220, Brazil, April 2-5, 2006
Shi, Jia; Gao, Furong; Wu, Tie-Jun
Development of A Capacitive Sensor for Injection Molding
Control of Particulate Processes VII, Engineering Conferences International, Harrison Hot Springs, BC, Canada, 29 October – 2 November, 2006
Gao, Furong; Wong, Ho Yin; Fung, Ka Tsai; Chen, Xi
Injection Molding Control & Monitoring
第17屆中國過程控制會議, 2006年7月31日－8月3日, 無錫, China (大會報告)
Gao, Furong
INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 385-390, Brazil, April 2-5, 2006
Yang, Yi; Gao, Furong
Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer
Proceedings - 2006 Academic Workshop on Advanced Forming Technology and Materials Processing，AWAFTMP'06, Shanghai, China. 21-25 October, 2006, pp. 38-46
Gao, Furong; Fung, Ka Tsai; Chen, Xi; Yang, Yi
PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. II, pp. 951- 956, Brazil, April 2-5, 2006
Lu, Ningyun; Yao, Yuan; Gao, Furong
注射成型用高性价比傳感器
中國塑料加工工業協會塑料技術協作委員會, 2006年會暨塑料工業高新技術及產業化研討會 (Plastech2006), 12-15 August, 2006
Gao, Furong


Expand All Collapse All


Article 10

Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation
Journal of Applied Electrochemistry, v. 35, (2), 2005, FEB, p. 185-191
Chen, Xueming; Gao, Furong; Chen, Guohua
Effect of dielectric material on microwave freeze drying of skim milk
Drying technology, v. 23, (1-2), 2005, p. 317-340
Wang, Wei; Chen, Guohua; Gao, Furong
Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model
Industrial & engineering chemistry research, v. 44, (21), 2005, OCT 12, p. 8095-8105
Shi, Jia; Gao, Furong; Wu, Tie-Jun
MADDOCK注塑螺杆性能研究
塑料=Plastics, v. 2005, (05), 2005, p. 77-80+31
金志明; 高福榮
On-line detection of the gate freezing-off time for injection molding
Polymer engineering and science, v. 45, (1), 2005, JAN, p. 33-41
Chen, Xi; Gao, Furong
Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system
Journal of process control, v. 15, (8), 2005, DEC, p. 907-924
Shi, Jia; Gao, Furong; Wu, Tie-Jun
Stage-based process analysis and quality prediction for batch processes
Industrial & engineering chemistry research, v. 44, (10), 2005, MAY 11, p. 3547-3555
Lu, Ningyun; Gao, Furong
Two-dimensional dynamic PCA for batch process monitoring
AIChE journal, v. 51, (12), 2005, DEC, p. 3300-3304
Lu, Ningyun; Yao, Yuan; Gao, Furong; Wang, Fuli
注射成型塑化过程的可视化实验研究
中国塑料=China Plastics, v. 2005, (09), 2005, p. 73-76
金志明; 馬艷娥; 高福榮
间歇过程滑动窗口子时段PCA建模和在线监测
控制与决策=Control and Decision, v. 2005, (09), 2005, p. 1034-1037
郭小萍; 陸寧云; 高福榮; 王福利

Book chapter 1

塑料成型过程控制
《工业过程控制技术》应用篇 / 2005, Chapter 5, p. 131-180
Gao, Furong

Conference paper 10

Adaptive GPC control of barrel temperatures in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 378-382
Yao, Ke; Gao, Furong
In-Mold Monitoring of Injection using capacitive transducer
Advanced Forming Technology – 2005 Cross-Strait Academic Workshop on Advanced Technology of Materials Forming and Die/Mold (AWATMFDM"05), Xi"an, China, August 12-15, p. 447-460
Gao, Furong; Fung, Ka Tsai; Chen, Xi
On-line check-ring failure detection and compensation in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2005, p. 49-53
Yang, Yi; Gao, Furong
Part weight prediction using capacitive transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 388-392
Fung, Ka Tsai; Gao, Furong; Chen, Xi
Part Weight Prediction Using Captive Transduer in Injection Molding
Society of Plastics Engineers Annual Technical Conference, ANTEC 2005, Boston, USA, v.2, May 1-5 2005, p. 823-827
Fung, Ka Tsai; Gao, Furong; Chen, Xi
Prospective of Injection Molding Control and Monitoring
《中國塑料》論壇 — 塑料注塑新技術國際研討會, pp. 111-126, 12-14 July 2005, Shanghai, China
Gao, Furong; Yang, Yi
基于在線測量技術的注塑成型塑化系統研究
2005《中國塑料》論壇—— 塑料注塑新技術國際研討會。, pp. 132-136, 12-14 July, 2005, Shanghai, China
Jin, Zhiming; Gao, Furong
基于在线测量技术的注塑成型塑化系统研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005,p. 132-136
金志明; 高福荣
注塑成型中的熔体温度均匀性研究
《中国塑料》论坛—— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 340-346
金志明; 朱复华; 高福荣
注塑成型塑化过程的可视化研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 343-346
金志明; 朱复华; 高福荣


Expand All Collapse All


Article 6

A soft-sensor development for melt-flow-length measurement during injection mold filling
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 384, (1-2), 2004, OCT 25, p. 245-254
Chen, Xi; Gao, Furong; Chen, Guohua
An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding
Polymer engineering and science, v. 44, (7), 2004, JUL, p. 1313-1318
Jin, Zhi Ming; Gao, Furong; Zhu, Fuhua
Capacitive transducer for in-mold monitoring of injection molding
Polymer engineering and science, v. 44, (8), 2004, AUG, p. 1571-1578
Chen, Xi; Chen, Guohua; Gao, Furong
Multirate dynamic inferential modeling for multivariable processes
Chemical engineering science, v. 59, (4), 2004, MAR, p. 855-864
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli
PCA-based modeling and on-line monitoring strategy for uneven-length batch processes
Industrial & engineering chemistry research, v. 43, (13), 2004, JUN 23, p. 3343-3352
Lu, Ningyun; Gao, Furong; Yang, Yi; Wang, Fuli
Sub-PCA modeling and on-line monitoring strategy for batch processes
AIChE journal, v. 50, (1), 2004, JAN, p. 255-259
Lu, Ningyun; Gao, Furong; Wang, Fuli

Book 3

Advanced Control of Chemical Processes
Advanced Control of Chemical Processes / v. 1&2, 2004
Allgower, Frank; Gao, Furong
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier Limited, 2004
Allg?wer, Frank; Gao, Furong
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier, 2004
Allg?wer, Frank; Gao, Furong

Conference paper 8

A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 746-750
Ma, Liling; Wang, Fuli; Jiang, Yunbo; Gao, Furong
A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT
Pre-print of 7th International Symposium on Adavanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 873-878
Shao, Cheng; Juan, Juan Nie; Gao, Furong
A stage-based monitoring method for batch process with minimal reference data
DYCOPS 2004, Boston USA, July 5-7 2004
Lu, Ningyun; Yang, Yi; Wang, Fuli; Gao, Furong
Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 879-884
Shao, Cheng; Luo, Guangjun; Gao, Furong
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
Proceedings of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 639-644
Yang, Yi; Gao, Furong
SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 740-745
Chang, Yuqing; Wang, Fuli; Gao, Furong
Stage-Based Multivariate Statistical Analysis for Injection Molding
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 471-476
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli
Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression
PPS-20 (Polymer Processing Society Annual Conference), Akron, Ohio, USA, June 20-24 2004
Yang, Yi; Gao, Furong


Expand All Collapse All


Article 7

A study of packing profile on injection molded part quality
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 358, (1-2), 2003, OCT 15, p. 205-213
Chen, Xi; Gao, Furong
Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis
Industrial & engineering chemistry research, v. 42, (18), 2003, SEP 3, p. 4198-4207
Lu, Ningyun; Wang, Fuli; Gao, Furong
High-performance Ti/BDD electrodes for pollutant oxidation
Environmental science & technology, v. 37, (21), 1 November 2003, Pages 5021-5026
Chen, Xueming; Chen, Guohua; Gao, Furong; Yue, Po Lock
Robust Stability of Optimal Iterative Learning Control and Application to Injection Molding Machine
自动化学报=Acta Automatica Sinica, v. 2003, (01), 2003, p. 72-79
邵誠; 高福榮; 楊毅
塑料注射成型熔融过程中的固相破碎现象
中国塑料, v. 17, (2), 2003, p. 94-97
金志明; 朱复华; 高福荣
注射成型中的熔体温度均匀性研究
中国塑料, v. 17, (3), 2003, p. 88-91
金志明; 朱复华; 高福荣
注射成型塑化过程的可视化研究
中国塑料, v. 17, (4), 2003, p. 6-90
金志明; 朱复华; 高福荣

Conference paper 7

A Fault Accomodation Control for Nonlinear Processes
ADCHM 2003, Hong Kong, 18-20 June
Zhang, Yingwei; Wang, Fuli; Yu, Ge; Gao, Furong
Injection Molding Control: Challenge and Prospective
7th International Conference on Manufacturing Technology: Global Manufacturing & Innovation, Chiang Chen Industrial Charity Foundation, Hong Kong Convention Center, 7-9 December
Gao, Furong
Multi-PCA Models for Process Monitoring and Fault Diagnosis
ADCHM 2003, Hong Kong
Ma, Liling; Jiang, Yubao; Wang, Fuli; Gao, Furong
Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column
ADCHM 2003, Hong Kong, 18-20 June
Shao, Cheng; Luo, Guangjun; Gao, Furong
Setting of Injection Molding Packing profile
Advanced Molding and Mold Conference, 94-99
Gao, Furong; Chen, Xi
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
ADCHM 2003, Hong Kong, 18-20 June
Yang, Yi; Gao, Furong
Stage-Based Multivariate Statistical Analysis for Injection Molding
ADCHM 2003, Hong Kong, 18-20 June
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli


Expand All Collapse All


Article 5

Bound estimation for solutions of a class of delay differential inequalities
NONLINEAR analysis-theory METHODS & APPLICATIONS, v. 49, (4), 2002, MAY, p. 525-533
Gao, Furong; Hou, Chunhai
Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities
Journal of optimization theory and applications, v. 113, (3), 2002, JUN, p. 621-634
Yu, Li; Gao, Furong
Processing of PC/LCP in situ composites by closed-loop injection molding
Composites science and technology, v. 62, (6), 2002, p. 757-765
Chan, Hong Shing; Leng, Yang; Gao, Furong
基于质量的注塑过程建模方法研究：最优保压压力曲线的设定
中国塑料, v. 16, (51), 2002
陈曦; 高福荣; 钱积新
注塑过程熔体充填长度的动态神经网络软测量模型
化工自动化及仪表, v. 29, (2), 2002, p.43-46
陈曦; 钱积新; 高福荣

Book 1

Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.
Intelligent Control of Injection Molding Process / June 2002
Gao, Furong

Book chapter 1

A control strategy for process with output dynamic nonlinearity
Recent Developments in optimization and optimal control in chemical engineering, Research Signpost / 115-127
Wang, Fuli; Gao, Furong; Li, Mingzhong

Conference paper 1

Solid-bed break-up during plastication in injection molding
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 572-575
Jin, Zhiming; Gao, Furong


Expand All Collapse All


Article 8

Analysis and Implementation of the Double-Controller Scheme
Developments in Chemical Engineering and Mineral Processing, v. 9, (1-2), 2001, p. 57-68
Tian, Y.C.; Gao, Furong
Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 79, (2), 2001, APR, p. 263-272
Li, Mingzhong; Yang, Yi; Gao, Furong; Wang, Fuli
H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach
International Journal of Systems Science, v. 32, (7), 2001, JUL, p. 905-913
Hou, CH; Gao, FR
Identification and control of nonlinear processes in the presence of unmeasured load disturbances
Industrial & engineering chemistry research, v. 40, (10), 2001, MAY 16, p. 2275-2282
Li, Mingzhong; Wang, Fuli; Gao, Furong
Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays
Journal of the Franklin Institute, v. 338, (1), 2001, p. 101-110
Li, Yu; Gao, Furong
PID-based sliding mode controller for nonlinear processes
Industrial & engineering chemistry research, v. 40, (12), 2001, JUN 13, p. 2660-2667
Li, Mingzhong; Wang, Fuli; Gao, Furong
Robust iterative learning control with applications to injection molding process
Chemical engineering science, v. 56, (24), 2001, DEC, p. 7025-7034
Gao, Furong; Yang, Yi; Shao, Cheng
Strategies for injection filling velocity control
Journal of reinforced plastics and composites, v. 20, (13), 2001, p. 1160-1170
Yang, Yi; Gao, Furong

Conference paper 2

Fuzzy modeling for injection molded part quality control
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 629-632
Yang, Yi; Gao, Furong
Optimal iterative learning control with uncertain initializations and disturbances
6th IFAC Symposium on Dynamics and control of process systems, Chejudo Island, Korea, June 4-6 2001, p. 437-442
Shao, Cheng; Yang, Yi; Gao, Furong; Wang, Fuli


Expand All Collapse All


Article 9

A simple nonlinear controller with diagonal recurrent neural network
Chemical engineering science, v. 55, (7), 2000, APR, p. 1283-1288
Gao, Furong; Wang, Fuli; Li, Mingzhong
A visual barrel system for study of reciprocating screw injection molding
Polymer engineering and science, v. 40, (6), 2000, JUN, p. 1334-1343
Gao, Furong; Jin, Zhi Ming; Chen, Xi
Adaptive control of the filling velocity of thermoplastics injection molding
Control engineering practice, v. 8, (11), 2000, NOV, p. 1285-1296
Yang, Yi; Gao, Furong
An analytical predictive control law for a class of nonlinear processes
Industrial & engineering chemistry research, v. 39, (6), 2000, JUN, p. 2029-2034
Gao, Furong; Wang, Fuli; Li, Mingzhong
Improved delay time estimation of RC ladder networks
IEEE TRANSACTIONS on Circuits and SYSTEMS i-fundamental THEORY and APPLICATIONS, v. 47, (2), 2000, FEB, p. 242-246
Hou, Chun Hai; Gao, Furong; Qian, Jixin
Mathematical Modeling of a Continuous Galvanizing Annealing Furnace
Developments in Chem Eng & Mineral Processing, v. 8, (3/4), 2000, p.359-374
Tian, Yuchu; Hou, Chunhai; Gao, Furong
Neural network approach to predict melt temperature in injection molding processes
Chinese Journal of Chemical Engineering, v. 8, (4), 2000, DEC, p. 326-331
Wang, BG; Gao, FR; Yue, PL
Neural network-based optimal iterative controller for nonlinear processes
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 78, (2), 2000, APR, p. 363-370
Gao, Furong; Wang, Fuli; Li, Mingzhong
Predictive control for processes with input dynamic nonlinearity
Chemical engineering science, v. 55, (19), 2000, OCT, p. 4045-4052
Gao, Furong; Wang, Fuli; Li, Mingzhong

Conference paper 6

A Transparent barrel for study of reciprocating screw injection molding
Society of Plastics Engineers, Annual Technical Conference (ANETC2000), Orlando, USA, May 7-11 2000, p. 523-527
Gao, Furong; Jin, Zhiming; Chen, Xi
An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation
ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, p. 633-637
Chen, X.; Gao, FR
Guaranteed cost control of uncertain discrete linear time-delay systems
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 2481-2485
Yu, Li; Gao, Furong; Xue, Anke
Modelling and control of processes with output dynamic nonlinearity
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 240-244
Wang, Fuli; Gao, Furong; Li, Mingzhong
Robust adaptive control of bilinear plants with high-order perturbation uncertainties
Proceedings of the IEEE Conference on Decision and Control, v. 5, 2000, p. 4934-4938
Gao, Furong; Shao, Cheng; Wang, Fuli; Wang, Wei
Robust H∞ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties
The 39th IEEE Conference on Decision and Control, Sydney, Australia, December 12-15 2000, p. 2754-2755
Yu, Li; Gao, Furong


Expand All Collapse All


Article 11

A neural-network-based nonlinear controller using an extended Kalman filter
Industrial & engineering chemistry research, v. 38, (6), 1999, JUN, p. 2345-2349
Gao, Furong; Wang, Fuli; Li, Mingzhong
Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding
Polymer engineering and science, v. 39, (1), 1999, JAN, p. 3-17
Tsoi, Hoi Pang; Gao, Furong
Control of integrator processes with dominant time delay
Industrial & engineering chemistry research, v. 38, (8), 1999, AUG, p. 2979-2983
Tian, Yu Chu; Gao, Furong
Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations
Journal of Mathematical Analysis and Applications, v. 238, (2), 1999, OCT 15, p. 558-566
Hou, Chun Hai; Gao, Furong
Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding
Polymer engineering and science, v. 39, (10), 1999, OCT, p. 2042-2063
Yang, Yi; Gao, Furong
Evaluation of gas pressure dynamics for gas-assisted injection molding process
International communications in heat and mass transfer, v. 26, (1), 1999, JAN, p. 85-93
Chao, Sher Meng; Wang, Shih Ming; Chen, Shia Chung; Gao, Furong
Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks
Industrial & engineering chemistry research, v. 38, (11), 1999, NOV, p. 4330-4336
Gao, Furong; Li, Mingzhong; Wang, Fuli; Wang, Baoguo; Yue, Po Lock
Injection velocity control of thermoplastic injection molding via a double controller scheme
Industrial & engineering chemistry research, v. 38, (9), 1999, SEP, p. 3396-3406
Tian, Yu Chu; Gao, Furong
Injection velocity control using a self-tuning adaptive controller
International polymer processing, v. 14, (2), 1999, JUN, p. 196-204
Yang, Yi; Gao, Furong
Melt temperature profile prediction for thermoplastic injection molding
Polymer engineering and science, v. 39, (9), 1999, SEP, p. 1787-1801
Zhao, Chunhui; Gao, Furong
Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations
Journal of Mathematical Analysis and Applications, v. 237, (2), 1999, SEP 15, p. 573-582
Hou, Chun Hai; Gao, Furong; Qian, Jixin

Conference paper 9

A comparison of different strategies for injection filling velocity control
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, p. 705-709
Yang, Y.; Gao, FR
A double-controller scheme for controlling dominant delay processes
DYNAMICS & CONTROL OF PROCESS SYSTEMS 1998, VOLUMES 1 AND 2, 1999, p. 443-448
Gao, FR; Tian, YC
Adaptive Control of Injection Velocity of Thermoplastics Injection Molding
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. N, 1999, p. 253-258
Yang, Yi; Gao, Furong
Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding
APCChE"99, Korea, v. 2, August 1999, p. 1009-1012
Gao, Furong; Yang, Yi
Control of Integrator Processes with Long Dead-Time
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. C, 1999, p. 277-282
Tian, Yu-Chu; Gao, Furong; Tade, Moses O.; Tang, Jinyu
Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate
Preprints of 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 345-346
Chan, Hong Shing; Leng, Yang; Gao, Furong
Neural Networks Prediction of Melt Temperatures at Plastication Phase
Preprints of the 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 353-354
Wang, Baoguo; Gao, Furong; Yue, Polock
On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks
PPS-15, The Polymer Processing Society, CD-ROM, The Netherlands, May 31 - June 4 1999
Gao, Furong; Wang, Baoguo; Yue, Polock
Predictive Control with Neuro-compensation for a Class of Nonlinear Processes
7th European Conference on Intelligent Techniques and Soft Computing, (EUFITT"99), CD-Rom, Aachen, Germany, September 13-16 1999
Gao, Furong; Wang, Fuli; Li, Mingzhong


Expand All Collapse All


Article 5

Adaptive control of chaotic continuous-time systems with delay
PHYSICA d-nonlinear PHENOMENA, v. 117, (1-4), 1998, JUN 15, p. 1-12
Tian, Yu Chu; Gao, Furong
Adaptive control of nozzle melt packing pressure
Journal of intelligent material systems and structures, v. 9, (12), 1998, DEC, p. 1046-1050
Yang, Yi; Gao, Furong
Compensation of dominant and variable delay in process systems
Industrial & engineering chemistry research, v. 37, (3), 1998, MAR, p. 982-986
Tian, Yu Chu; Gao, Furong
Double-controller scheme for control of processes with dominant delay
IEE proceedings-control THEORY and APPLICATIONS, v. 145, (5), 1998, SEP, p. 479-484
Tian, Yu Chu; Gao, Furong
Double-controller scheme for separating load rejection from set-point tracking
CHEMICAL ENGINEERING RESEARCH & DESIGN, v. 76, (A4), 1998, MAY, p. 445-450
Tian, Yu Chu; Gao, Furong

Book 1

Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.
Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding / May 1998
Gao, Furong

Conference paper 4

A Fuzzy Logic Controller for Injection Ram Velocity
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 44, 1998, p. 641-644
Tsoi, Hoi-Pang; Gao, Furong
Adaptive Control of Nozzle Melt Packing Pressure
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 1, 1998, p. 472-476
Gao, Furong; Yang, Yi
An Experimental Analysis of Injection Molding Melt Temperature
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 1998, p. 393-397
Zhao, Chunhua; Gao, Furong
射出成形におけるファヅィ理論を用いた自動保壓切換
成形加工シソポヅァ, 1998, p. 273-276
Gao, Furong; Zhao, Chunhua; 平塚和人; 蔡文遠


Expand All Collapse All


Article 1

Extraction of delay information from chaotic time series based on information entropy
PHYSICA D, v. 108, (1-2), 1997, SEP 15, p. 113-118
Tian, Yu Chu; Gao, Furong

Book chapter 1

Injection Molding Control
Injection Molding: Fundamentals and Application / Edited by M. R. Kamal. 1997, Chapter 12, p. 451-502
Gao, Furong; Yi, Yang

Conference paper 4

A Real-time Fuzzy Logic Controller for Ram Velocity in Injection Molding
4th International Conference on Manufacturing Technology in Hong Kong, CD-ROM, November30 - 3 December 1997
Tsoi, Hoi-Pang; Gao, Furong
Complicated Dynamics in Simple Delay Systems
1997 China-Korea Joint Workshop on Process Systems Engineering, Hangzhou, China, June 27-29 1997, p. 58-63
Tian, Yu-Chu; Gao, Furong
Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding
ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3, 1997, p. 480-486
Gao, Furong; Yang, Yi
Simple delay systems with chaotic dynamics
CONTROL OF OSCILLATIONS AND CHAOS - 1997 1ST INTERNATIONAL CONFERENCE, PROCEEDINGS, VOLS 1-3, 1997, p. 319-320
Tian, Yu Chu; Gao, Furong


Expand All Collapse All


Article 2

Cavity pressure control during the cooling stage in thermoplastic injection molding
Polymer engineering and science, v. 36, (19), 1996, OCT, p. 2467-2476
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R.
Cavity Pressure Dynamics and Self-tuning Control for Filling and Packing Phases of Thermoplastics Injection Molding
Polymer Engineering and Science, v. 36, (9), 1996, p. 1272-1285
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R.


Expand All Collapse All


Article 1

Adaptive Control of Cavity Pressure During Filling
Engineering Plastics, v. 8, 1995, p. 136-148
Gao, Furong; Kamal, Musa R.; Patterson, Wayne Ian

Conference paper 1

Cavity Pressure Adaptive Control for Thermoplastics Injection Molding
3rd International Conference on Manufacturing Technology, CD-ROM, Hong Kong, December 1995, p. 304-309
Gao, Furong; Patterson, W.I.; Kamal, M.R.


Expand All Collapse All


Article 1

Self‐tuning cavity pressure control of injection molding filling
Advances in Polymer Technology, 13, 1994
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R.

Conference paper 3

Cavity Pressure Control during Cooling
Society of Plastics Engineers, Annual Technical Conference (ANTEC'94), San Francisco, USA, May 1994, p. 706-711
Kamal, Musa R.; Gao, Furong; Patterson, Wayne Ian
Control of Cavity Pressure during Packing, Society of Plastics Engineers
Annual Technical Conference (ANTEC'94), San Francisco, USA, (pt 1),May 1994, p. 701-705
Patterson, Wayne Ian; Gao, Furong; Kamal, Musa R.
On-line Quality Monitoring Coupling Computer Analysis and Actual Measurement
Japanese Society of Polymer Processing, Tokyo, Japan, June 1994
Rowland, J.C.; Gao, Furong


Expand All Collapse All


Article 1

Dynamics and Control of Surface and Mold Temperatures in Injection Molding
International Polymer Processing, v. 8, (2), 1993, p. 147-157
Gao, Furong; Patterson, W.I.; Kamal, M.R.

Conference paper 2

Adaptive Control of Cavity Pressure During Filling, Society of Plastics Engineers
Ann. Technical Conf. (ANTEC'93), pp. 565-569, New Orleans, USA, May 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R.
Cavity Pressure Control of Injection Molding Filling
The Polymer Processing Society Conference, Tokyo, Japan, October 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R.


Expand All Collapse All


Conference paper 1

A Versatile Computer Control System for Injection Molding
Society of Plastics Engineers, Annual Technical Conference (ANTEC'92), Detroit, USA, May 1992, p. 1887-1890
Gao, Furong; Fusser, H.; Patterson, W.I.; Kamal, M.R.


Expand All Collapse All


Conference paper 1

Mould Temperature Measurement and Control, Society of Plastics Engineers
Annual Technical Conference (ANTEC'90), Dallas, USA, May 1990, p. 227-232
Patterson, W.I.; Kamal, M.R.; Gao, Furong


Expand All Collapse All


2016 25

A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace
Industrial and Engineering Chemistry Research, v. 55, (22), June 2016, p. 6465-6474
Zhang, Ridong; Tao, Jili; Gao, Furong Article
Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems
IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 46, (3), March 2016, article number 7151836, p. 326-333
Wang, Zhuo; Gao, Furong Article
An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring
AIChE Journal, v. 62, (7), July 2016, p. 2358-2373
Qin, Yan; Zhao, Chunhui; Gao, Furong Article
Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes
IEEE Transactions on Automatic Control, v. 61, (1), January 2016, article number 7109128, p. 270-275
Cao, Zhixing; Zhang, Ridong; Yang, Yi; Lu, Jingyi; Gao, Furong Article
Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints
IET Control Theory and Applications, v. 10, (9), June 2016, p. 1018-1026
Lu, Jingyi; Cao, Zhixing; Gao, Furong Article
Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis
IEEE Transactions on Control Systems Technology, v. 24, (3), May 2016, article number 7295568, p. 928-939
Zhao, Chunhui; Gao, Furong Article
Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes
Industrial and Engineering Chemistry Research, v. 55, (6), February 2016, p. 1598-1608
Yang, Yi; Cao, Wanlin; Cao, ZhiKai; Zhou, Hua; Gao, Furong; Shi, Jia Article
Iterative Learning Kalman Filter for Repetitive Processes
Journal of Process Control, v. 46, October 2016, p. 92-104
Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong Article
New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes
IEEE Transactions on Automatic Control, v. 61, (10), 2016, article number 7339434, p. 3045-3051
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong Article
Online identification for batch processes in closed loop incorporating priori controller knowledge
Computers and Chemical Engineering, v. 90, July 2016, p. 222-233
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong Article
Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches
Chemometrics and Intelligent Laboratory Systems, v. 156, 2016, p. 81-88
Zheng, Junhua; Ge, Zhigiang; Song, Zhihuan; Gao, Furong Article
Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection
Chemometrics and Intelligent Laboratory Systems, v. 158, November 2016, p. 69-79
Guo, Shuo; Yuan, Decheng; Zhang, Ridong; Gao, Furong Article
Priori Knowledge-Based Online Batch-to-Batch Identification in a Closed Loop and an Application to Injection Molding
Industrial and Engineering Chemistry Research, v. 55, (32), August 2016, p. 8818-8829
Cao, Zhixing; Yang, Yi; Yi, Hui; Gao, Furong Article
Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes
Industrial & Engineering Chemistry Research, v. 55, (50), December 2016, p. 12896-12908
Zhao, Chunhui; Wang, Wei; Gao, Furong Article
State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer
Energies, v. 9, (9), September 2016, article number 675
Tang, Xiaopeng; Liu, Boyang; Gao, Furong; Lv, Zhou Article
Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity
Industrial & Engineering Chemistry Research, v. 55, (51), Dec 2016, p. 13074-13084
Li, Dewei; Xi, Yugeng; Lu, Jingyi; Gao, Furong Article
The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis
International Journal of Control, v. 90, (12), December 2017, p. 2721-2733
Li, Dewei; Li, Jiwei; Xi, Yugeng; Gao, Furong Article
Two-time dimensional recursive system identification incorporating priori pole and zero knowledge
Journal of Process Control, v. 39, March 2016, p. 100-110
Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong Article
注塑過程中注射保壓階段最小運行時間控制方法
工程塑料應用=Engineering Plastics Application, v. 44, (4), April 2016, p. 53-56
王立敏; 朱城杰; 于晶賢; 高福榮 Article
集成神经网络与自适应算法的分数阶滑模控制
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v. 33, (10), 2016, p. 1373-1377
张碧陶; 高福荣; 姚科 Article
Injection Molding Process Control, Monitoring, and Optimization
Injection Molding Process Control, Monitoring, and Optimization / by Yi Yang, Xi Chen, Ningyun Lu and Furong Gao. Munich: Carl Hanser Verlag GmbH & Co. KG, 2016. Book series: Progress in Polymer Processing.
Yang, Yi; Chen, Xi; Lu, Ningyun; Gao, Furong Book
间歇过程的过程建模与参数控制
间歇过程的过程建模与参数控制 / 高福荣 著. 北京: 科学出版社, 2016.
高福荣 Book
‘State Déjà vu’ Inter-Agent Learning Adaptive Control Framework
IFAC-PapersOnLine, v. 49, (7), June 2016, p. 984-989
Qu, Hongyi; Zhang, Ridong; Gao, Furong Conference paper
Product Quality Control for Single Screw Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, 2016, p. 870-875
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Lu, Ningyun; Gao, Furong Conference paper
Stability Evaluation based Non-steady Variable Identification for Online Fault Prognosis
IFAC-PapersOnLine, v. 49, (7), 9 August 2016, p. 699-704
Zhao, C.H.; Wang, Weii; Gao, Furong Conference paper

2015 27

A nested-loop Fisher discriminant analysis algorithm
Chemometrics and Intelligent Laboratory Systems, v. 146, July 2015, p. 396-406
Zhao, Chunhui; Gao, Furong Article
A two-stage design of two-dimensional model predictive iterative learning control for nonrepetitive disturbance attenuation
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5683-5689
Lu, Jingyi; Cao, Zhixing; Wang, Zhuo; Gao, Furong Article
An improved decoupling structure based state space MPC design with improved performance
Systems and Control Letters, v. 75, 2015, p. 77-83
Zhang, Ridong; Gao, Furong Article
An Iterative Modeling and Trust-Region Optimization Method for Batch Processes
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3186-3199
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong Article
Application of Two-Dimensional Predictive Functional Control in Injection Molding
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10088-10102
Yang, Bo; Xu, Zuhua; Yang, Yi; Gao, Furong Article
Bayesian improved model migration methodology for fast process modeling by incorporating prior information
Chemical Engineering Science, v. 134, September 2015, p. 23-35
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring
Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3154-3166
Zhao, Chunhui; Wang, Wei; Qin, Yan; Gao, Furong Article
Cost-effective process modeling and optimization methodology assisted by robust migration techniques
Industrial and Engineering Chemistry Research, v. 54, (21), June 2015, p. 5736-5748
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Delay-range dependent H∞control for uncertain 2D-delayed systems
Numerical Algebra, Control and Optimization, v. 5, (1), 2015, p. 11-23
Wang, Li-Min; Yu, Jing-Xian; Shi, Jia; Gao, Furong Article
Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure
Journal of Process Control, v. 26, 2015, p. 102-114
Zhang, Ridong; Jin, Qibing; Gao, Furong Article
Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures
Computers and Chemical Engineering, v. 80, September 2015, p. 130-139
Zhang, Ridong; Gao, Furong Article
Iterative improvement of parameter estimation for model migration by means of sequential experiments
Computers and Chemical Engineering, v. 73, February 2015, p. 128-140
Luo, Linkai; Yao, Yuan; Gao, Furong Article
Online fault prognosis with relative deviation analysis and vector autoregressive modeling
Chemical Engineering Science, v. 138, December 2015, p. 531-543
Zhao, Chunhui; Gao, Furong Article
Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products
Construction and Building Materials, v. 79, March 2015, p. 214-222
Ji, Yong-sheng; Zhan, Guangmei; Tan, Zhongchao; Hu, Yijie; Gao, Furong Article
Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches
Industrial and Engineering Chemistry Research, v. 54, (41), October 2015, p. 10020-10030
Li, Wenqing; Zhao, Chun-Hui; Gao, Furong Article
State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower
IEEE Transactions on Automation Science and Engineering, v. 12, (4), October 2015, article number 6818446, p. 1516-1524
Zhang, Ridong; Cao, Zhixing; Lu, Renquan; Li, Ping; Gao, Furong Article
Two-time-dimensional model predictive control of weld line positioning in bi-injection molding
Industrial and Engineering Chemistry Research, v. 54, (17), May 2015, p. 4795-4804
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Article
基于时序模型迁移的间歇过程监测建模方法
控制与决策=Control and Decision, v. 30, (10), October 2015, p. 1885-1889
刘昊知; 胥布工; 高福荣 Article
A fast and effective 2D regulatory control for injection molding process
Annual Technical Conference - ANTEC, Conference Proceedings, 2015, p. 2565-2571
Yang, B.; Yang, Y.; Gao, Furong Conference paper
A MPC Operation Method for a Photovoltaic System with Batteries
IFAC-PapersOnLine, v. 48, (8), 2015, p. 807-812
Liu, Bing; Lu, Zhou; Yao, Ke; Gao, Furong Conference paper
A Stable Two-Time Dimensional (2D) Model Predictive Control with Zero Terminal State Constraints for Constrained Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 514-519
Lu, Jingyi; Cao, Zhixing; Gao, Furong Conference paper
A Variant Fisher Discriminant Analysis Algorithm and its Applicationto Fault Diagnosis
2015 10th Asian Control Conference (ASCC 2015), Institute of Electrical and Electronics Engineers (IEEE), 2015
Wang, Wei; Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
An information technology way for uplifting polymer processing efficiency
Polymer Process Engineering '15 - UK China Advanced Material Research Institute (PPE '15 - UK China AMRI), University of Bradford, 8-10 September 2015
Gao, Furong Conference paper
An Information Technology Way for Uplifting Polymer Processing Efficiency
The 12th International Conference of Advanced Molding Technology and Materials Processing (SAMT 2015), Nansha, China, 20-22 November 2015
Gao, Furong Conference paper
Integrated Optimization Based on Transition Tracking Analysis for Batch Processes
IFAC-PapersOnLine, v. 48, (8), 2015, p. 272-277
Qin, Yan; Zhao, Chunhui; Gao, Furong Conference paper
Model Migration through Bayesian Adjustments
IFAC-PapersOnLine, v. 48, (8), 2015, p. 112-116
Luo, Linkai; Gao, Furong Conference paper
Multi-stage Process Analysis and Modelling based Online Monitoring for Chip Packaging Process
IFAC-PapersOnLine, v. 48, (28), 2015, p. 993-998
Qin, Yan; Zhao, Chunhui; Gao, Furong Conference paper

2014 37

Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction
Industrial and Engineering Chemistry Research, v. 53, (40), October 2014, p. 15629-15638
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems
Chinese Journal of Chemical Engineering, v. 22, (7), July 2014, p. 837-841
Bo, Cuimei; Zhang, Ridong; Zhang, Chenghao; Tang, Jihai; Qiao, Xu; Gao, Furong Article
Constrained two dimensional recursive least squares model identification for batch processes
Journal of Process Control, v. 24, (6), 2014, p. 871-879
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Article
Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace
IET Control Theory and Applications, v. 8, (14), 2014, p. 1303-1311
Zhang, Ridong; Cao, Zhixing; Li, Ping; Gao, Furong Article
Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace
Chemometrics and Intelligent Laboratory Systems, v. 134, May 2014, p. 110-117
Wu, Sheng; Zhang, Ridong; Lu, Renquan; Gao, Furong Article
Fault-relevant Principal Component Analysis (FPCA) method for multivariate statistical modeling and process monitoring
Chemometrics and Intelligent Laboratory Systems, v. 133, April 2014, p. 1-16
Zhao, Chun Hui; Gao, Furong Article
GA based predictive functional control for batch processes under actuator faults
Chemometrics and Intelligent Laboratory Systems, v. 137, October 2014, p. 67-73
Zhang, Ridong; Zou, Hongbo; Xue, Anke; Gao, Furong Article
Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower
Journal of Process Control, v. 24, (3), March 2014, p. 125-132
Zhang, Ridong; Wu, Sheng; Gao, Furong Article
Inter-batch-evolution-traced process monitoring based on inter-batch mode division for multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 138, December 2014, p. 178-192
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
New PID Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3283-3292
Zhang, Ridong; Cao, Zhixing; Bo, Cuimei; Li, Ping; Gao, Furong Article
Predictive control optimization based PID control for temperature in an industrial surfactant reactor
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 48-62
Zhang, Ridong; Wu, Sheng; Lu, Renquan; Gao, Furong Article
Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process
Industrial and Engineering Chemistry Research, v. 53, (2), January 2014, p. 723-731
Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong Article
Real-time implementation of improved state-space MPC for air supply in a coke furnace
IEEE Transactions on Industrial Electronics, v. 61, (7), 2014, article number 6616639, p. 3532-3539
Zhang, Ridong; Xue, Anke; Lu, Renquan; Li, Ping; Gao, Furong Article
Regression modeling and quality prediction for multiphase batch processes with inner-phase analysis
Chemometrics and Intelligent Laboratory Systems, v. 135, July 2014, p. 1-16
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Separated design of robust model predictive control for LPV systems with periodic disturbance
Journal of Process Control, v. 24, (1), January 2014, p. 250-260
Li, Dewei; Gao, Furong; Xi, Yugeng Article
State space model predictive fault-tolerant control for batch processes with partial actuator failure
Journal of Process Control, v. 24, (5), 2014, p. 613-620
Zhang, Ridong; Lu, Jingyi; Qu, Hongyi; Gao, Furong Article
Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 58-67
Zhao, Chunhui; Gao, Furong Article
Temperature control of industrial coke furnace using novel state space model predictive control
IEEE Transactions on Industrial Informatics, v. 10, (4), November 2014, article number 6881729, p. 2084-2092
Zhang, Ridong; Xue, Anke; Gao, Furong Article
Temperature Modeling in a Coke Furnace with an Improved RNA-GA Based RBF Network
Industrial and Engineering Chemistry Research, v. 53, (8), February 2014, p. 3236-3245
Zhang, Ridong; Tao, Jili; Gao, Furong Article
Two-level PLS model for quality prediction of multiphase batch processes
Chemometrics and Intelligent Laboratory Systems, v. 130, January 2014, p. 29-36
Ge, Zhiqiang; Song, Zhihuan; Zhao, Luping; Gao, Furong Article
A Fast 2D Predictive Control Algorithm for Injection Molding process
Asian Workshop on Polymer Processing 2014, Kenting, Taiwan, 17-20 November 2014
Yang, Bo; Yang, Yi; Gao, Furong Conference paper
A Repetitiveness Index-based Adaptive Two Dimensional Iterative Learning Model Predictive Control
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 19, 2014, p. 3092-3097
Lu, Jingyi; Cao, Zhixing; Gao, Furong Conference paper
A Two-Dimensional Iterative Learning Model Predictive Control Method for Injection Molding Based on Mixed Integer Quadratic Programming
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2311-2316
Cao, Zhixing; Lu, Jingyi; Gao, Furong Conference paper
Batch process control: from continuous approaches to 2D methods
2014 Workshop on Learning Control, Qingdao, China, 25-27 April 2014
Gao, Furong; Mo, Shengyong; Yang, Yi; Yao, Ke Conference paper
Batch Process Control: from continuous approaches to 2-time dimensional control
The 25th Chinese Process Control Conference (CPCC), Dalian, China, 9-11 August 2014
Gao, Furong Conference paper
Control in Polymer Processing for Key Processes and Their Peripherals
The 11th SAMT Annual Conference, Dalian, China, 23-25 July 2014
Gao, Furong; Yang, Yi Conference paper
Delay-range-dependent Robust BIBO Stabilization of 2D Discrete Delayed Systems Via LMI Approach
IFAC Proceedings Volumes, v. 19, 2014, p. 10994-10999
Wang, Limin; Chen, Xi; Gao, Furong Conference paper
Development of a Capacitive Transducer for Dimensions Prediction in Polymer Extrusion
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, January 2014, p. 2259-2264
Cheng, Yu; Fung, Ka Tsai; Gao, Furong Conference paper
Energy-Saving Based Allocated Generalized Predictive Control (AGPC) in Extrusion Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), January 2014, p. 2265-2270
Gao, Furong; Jiang, Zhijiang; Mo, Shengyong; Yang, Yi Conference paper
From Single Batch Process Control to Multiple Batch Processes Control: A Review and a Perspective for Injection Molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2271-2276
Cao, Zhixin; Gao, Furong; Lu, Jingyi; Yang, Yi Conference paper
Intra-Batch Evolution Based Process Monitoring for Multiphase Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 47, (3), 2014, p. 6680-6685
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
Iterative Optimization for Batch Processes Through Online Modelling
IFAC Proceedings Volumes, v. 19, 2014, p. 10455-10450
Zhao, Jinjin; Yang, Yi; Chen, Xi; Gao, Furong Conference paper
Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model
2014 Seventh International Symposium on Computational Intelligence and Design (ISCID 2014), Institute of Electrical and Electronics Engineers (IEEE), 2014, p. 399-402
Liu, Haozhi; Xu, Bugong; Gao, Furong Conference paper
Monitoring of Polymer Processing Processes and Technology
2014 Asian Workshop on Polymer Processing (2014 AWPP), Kenting, Taiwan, 17-21 November 2014
Gao, Furong Conference paper
Two Dimensional Predictive Functional Control for Injection Molding Process
Society of Plastics Engineering, ANTEC 2014, v. 3, (January), 2014, p. 2305-2310
Yang, Bo; Yang, Yi; Shi, Jia; Gao, Furong Conference paper
Two-Time Dimensional Hybrid Dynamic Matrix Control for Injection Molding Process
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, (January), 2014, p. 2317-2322
Mo, Shengyong; Jiang, Zhijun; Yang, Yi; Gao, Furong Conference paper
注塑机控制的智能化发展
CAE Molding Solution Alliance Conference 2014, Dongguan, 20-21 March 2014
Gao, Furong Conference paper

2013 32

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes
Chinese Journal of Chemical Engineering, v. 21, (4), April 2013, p. 401-411
Wang, Limin; Chen, Xi; Gao, Furong Article
Between‐phase calibration modeling and transition analysis for phase‐based quality interpretation and prediction
AIChE Journal, v. 59, (1), January 2013, p. 108-119
Zhao, Chunhui; Gao, Furong; Sun, Youxian Article
Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System
Industrial and Engineering Chemistry Research, v. 52, (49), December 2013, p. 17465-17474
Bo, Cuimei; Tang, Jihai; Cui, Mifen; Feng, Kangkang; Qiao, Xu; Gao, Furong Article
Delay-range-dependent guaranteed cost control for batch processes with state delay
AIChE Journal, v. 59, (6), June 2013, p. 2033-2045
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (7), February 2013, p. 2661-2671
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties
Journal of Process Control, v. 23, (5), June 2013, p. 715-730
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays
Control Engineering Practice, v. 21, (10), October 2013, p. 1321-1333
Wang, Limin; Mo, Shengyong; Qu, Hongyi; Zhou, Donghua; Gao, Furong Article
Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes
AIChE Journal, v. 59, (3), March 2013, p. 772-779
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (15), April 2013, p. 5507-5511
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong; Wang, Peiliang Article
Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (12), March 2013, p. 4586-4596
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Multiset Independent Component Regression (MsICR) Based Statistical Data Analysis and Calibration Modeling
Industrial and Engineering Chemistry Research, v. 52, (8), 2013, p. 2917-2924
Zhao, Chunhui; Gao, Furong Article
Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace
Chemical Engineering Science, v. 94, May 2013, p. 30-43
Zhang, Ridong; Gao, Furong Article
New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure
Industrial and Engineering Chemistry Research, v. 52, (46), November 2013, p. 16294-16300
Zhang, Ridong; Gan, Liangzhi; Lu, Jingyi; Gao, Furong Article
Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (18), May 2013, p. 6182-6192
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong Article
Review of Recent Research on Data-Based Process Monitoring
Industrial and Engineering Chemistry Research, v. 52, (10), March 2013, p. 3543-3562
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 979-984
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance
Industrial and Engineering Chemistry Research, v. 52, (2), January 2013, p. 817-829
Zhang, Ridong; Gao, Furong Article
Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes
Industrial and Engineering Chemistry Research, v. 52, (41), October 2013, p. 14613-14626
Zhao, Chunhui; Gao, Furong Article
Synthesis of Dynamic Output Feedback RMPC with Saturated Inputs
Automatica, v. 49, (4), April 2013, p. 949-954
Li, Dewei; Xi, Yugeng; Gao, Furong Article
Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions
Journal of Environmental Engineering (United States), v. 139, (7), July 2013, p. 1004-1016
Qin, Xusong; Yang, Bin; Gao, Furong; Chen, Guohua Article
基于2維性能參考模型的2維模型預測迭代學習控制策略
自動化學報. =Acta Automatica Sinica, v. 39, (5), May 2013, p. 565-573
師佳; 江青茵; 曹志凱; 周華; 高福榮 Article
迭代学习控制的二维模型理论及其应用
迭代学习控制的二维模型理论及其应用 / 王友清，周东华，高福荣. 北京: 科学出版社, 2013
王友清; 周东华; 高福荣 Book
Feedback Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Editor: Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 313-337
Yang, Yi; Gao, Furong Book chapter
A PID-type Model Predictive Iterative Learning Control for Injection Molding Process
Society of Plastics Engineers, Annual Technical Conference, ANTEC 2013, Cincinnati, Ohio, USA, April 21-24 2013, p. 2229-2234
Shi, Jia; Yang, Yi; Gao, Furong Conference paper
From One Dimensional to Two Dimensional Hybrid Control of Injection Molding Process
9th World Congress of Chemical Engineering, Seoul, Korea, 18-23 August 2013
Gao, Furong; Yang, Yi; Mo, Shengyong Conference paper
Injection Molding: From Single Machine to Plant-Wide Intelligent Control
The 13th Pacific Polymer Conference (PPC 13), Kaohsiung, Taiwan, 17-22 November 2013
Gao, Furong Conference paper
Inner-Phase-Evolution-Traced Statistical Modeling and Online Monitoring for Uneven Batch Processes
IEEE International Conference on Control and Automation, 2013, article number 6564919, p. 294-299
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
New Approaches of 2D Recursive Least Squares System Identification for Batch Processes
ANTEC 2013 - Proceedings of the Technical Conference & Exhibition, Society of Plastics Engineers, 2013, p. 443-448
Cao, Zhixing; Yang, Yi; Gao, Furong Conference paper
Quality-related Inner-phase Evolution Analysis and Quality Prediction for Uneven Batch Processes
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 10, (PART 1), 2013, p. 517-522
Zhao, Luping; Zhao, Chunhui; Gao, Furong Conference paper
Quality-relevant Fault Diagnosis with Concurrent Phase Partition and Analysis of Relative Changes for Multiphase Batch Processes
24th China Process Control Conference
Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
Rejection of Periodic Disturbances Based on Adaptive Repetitive Model Predictive Control
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 768-773
Lu, Jingyi; Li, Dewei; Cao, Zhixing; Gao, Furong Conference paper
Two Dimensional Recursive Least Squares for Batch Processes System Identification
IFAC Proceedings Volumes, v. 46, (32), December 2013, p. 780-784
Cao, Zhixing; Yang, Yi; Lu, Jingyi; Gao, Furong Conference paper

2012 43

4th Symposium on advanced control of industrial processes (Adconip)
Asia-Pacific Journal of Chemical Engineering, v. 7, (5), 2012, Sep, p. 633-634
Xie, Lei; Gao, Furong; Huang, Biao Article
A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis
Industrial and Engineering Chemistry Research, v. 51, (34), 2012, Aug, p. 11207-11217
Zhao, Chunhui; Sun, Youxian; Gao, Furong Article
Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes
AIChE journal, v. 58, (9), September 2012, p. 2682-2696
Zhao, Chunhui; Gao, Furong Article
Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes
Acta Automatica Sinica, v.39, (5), 2013, p. 487-493
Zhao, Chun-Hui; Li, Wen-Qing; Sun, You-Xian; Gao, Fu-Rong Article
Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations
The Canadian journal of chemical engineering, v. 90, (6), December 2012, p. 1383-1392
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong Article
Nonlinear quality prediction for multiphase batch processes
AIChE journal, v. 58, (6), June 2012, p. 1778-1787
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Overall Control System for Injection Molding Process
International polymer processing, v. 27, (1), March 2012, p. 40-59
Yang, Yi; Yao, K.; Gao, Furong Article
Partially Decoupled Approach of Extended Non-minimal State Space Predictive Functional Control for MIMO Processes
Journal of process control, v. 22, (5), June 2012, p. 837-851
Zhang, Ridong; Xue, Anke; Wang, Shuding; Zhang, Jianming; Gao, Furong Article
Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model
Chinese Journal of Chemical Engineering, v. 20, (6), 2012, Dec, p. 1121-1127
Dong, Weiwei; Yao, Yuan; Gao, Furong Article
Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes
23rd Chinese Process Control Conference (CPCC), Chinese Journal of Chemical Engineering, Xiamen, China, v.20, (6), 2012, Dec, p. 1191-1197
Zhao, Luping; Zhao, Chunhui; Gao, Furong Article
Polymer Extrusion: From Control System Design to Product Quality
Industrial & engineering chemistry research, v. 51, (45), November 2012, p. 14759-14770
Jiang, Zhijun; Yang, Yi; Mo, Shengyong; Yao, Ke; Gao, Furong Article
Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures
Journal of process control, v. 22, (7), August 2012, p. 1273-1286
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong; Chen, Xi Article
Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction
AIChE journal, v. 58, (2), 2012, p. 466-479
Zhao, Chunhui; Gao, Furong Article
Statistical modeling and online monitoring based on between-set regression analysis
Industrial and Engineering Chemistry Research, v. 51, (25), 2012, June, p. 8495-8509
Zhao, Chunhui; Gao, Furong; Sun, Youxian Article
Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data
Industrial & engineering chemistry research, v. 51, (35), September 2012, p. 11409-11416
Ge, Zhiqiang; Song, Zhihuan; Gao, Furong Article
Two-step multiset regression analysis (MsRA) algorithm
Industrial & engineering chemistry research, v. 51, (3), 2012, p. 1337-1354
Zhao, Chunhui; Gao, Furong Article
Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty
Journal of process control, v. 22, (5), June 2012, p. 899-914
Mo, Shengyong; Wang, Limin; Yao, Yuan; Gao, Furong Article
Utilizing transition information in online quality prediction of multiphase batch processes
Journal of process control, v. 22, (3), 2012, p. 599-611
Ge, Zhiqiang; Zhao, Luping; Yao, Yuan; Song, Zhihuan; Gao, Furong Article
Wastewater Quality Monitoring System Using Sensor Fusion and Machine Learning Techniques
Water Research, v. 46, (4), 2012, p. 1133-1144
Qin, Xusong; Gao, Furong; Chen, Guohua Article
Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods
Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods / Tao Liu, Furong Gao. London; New York : Springer, c2012
Liu, Tao; Gao, Furong Book
Batch process control
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 12, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Cascade control system
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 321-347, Ch. 9, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Concluding Remarks
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 453-456, Ch. 13, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Control of single-input-single-output (SISO) processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 433-452, Ch. 7, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Decoupling control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 369-431, Ch. 11, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Direct Quality Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 377-390
Yang, Yi; Gao, Furong Book chapter
Learning Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 339-353
Yang, Yi; Gao, Furong Book chapter
Multiloop control of multivariable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 349-368, Ch. 10, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Multivariate Statistical Process Control
Computer Modeling for Injection Molding: Simulation, Optimization, and Control / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 335-376
Yao, Yuan; Gao, Furong Book chapter
Relay feedback identification of integrating processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 197-216, Ch. 5, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Relay feedback identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 119-196, Ch. 4, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Relay Feedback Identification of Unstable Processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 217-240, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Step response identification of integrating and unstable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 85-117, Ch. 3, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Step response identification of stable processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 13-84, Ch. 2, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Two-degrees-of-freedom (2DOF) control of SISO processes
Industrial Process Identification and Control Design / Liu, Tao and Gao, Furong. New York : Springer, 2012, p. 279-319, Ch. 8, Series: Advances in Industrial Control (AIC)
Liu, Tao; Gao, Furong Book chapter
Application of Advanced Control Algorithms in Injection Molding
The 28th International Conference of the Polymer Processing Society (PPS-28), Pattaya, Thailand, 11-15 December, 2012
Yang, Yi; Gao, Furong Conference paper
Batch Process Control, From Traditional Approaches to 2D Control
2012 12th International Conference on Control, Automation and Systems, 2012, article number 639323, p. 529-532
Yang, Yi; Mo, Shengyong; Gao, Furong Conference paper
Between-phase transition analysis for phase-based quality prediction
2012 24th Chinese Control and Decision Conference (CCDC), Taiyuan, China, 23-25 May 2012
Zhao, Chunhui; Sun, Youxian; Gao, Furong Conference paper
Injection velocity control using 2D model predictive iterative learning algorithm
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2155-2160
Yang, Yi; Shi, Jia; Gao, Furong Conference paper
Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring
2012 SAMT International Conference, Hangzhou, 22-24 August, 2012
Yang, Yi; Gao, Furong Conference paper
Multivariate statistical analysis methods to investigate interindividual glucose dynamics for subjects with type 1 diabetes mellitus
Proceedings of the World Congress on Intelligent Control and Automation (WCICA), Beijing, China, 2012, Article number 6359424, p. 4989-4994
Zhao, Chun Hui; Sun, Youxian; Gao, Furong Conference paper
Polymer extrusion control system design
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2012, p. 2187-2196
Jiang, Zhijun; Yan, Yongze; Gao, Furong Conference paper
Robust iterative learning control with quadratic performance index
Industrial & engineering chemistry research, v. 51, (2), 2012, p. 872-881
Xu, Zuhua; Zhao, Jun; Yang, Yi; Shao, Zhijiang; Gao, Furong Conference paper

2011 17

A Bidirectional Between-Set Statistical Analysis Method and Its Applications
AIChE journal, v. 57, (5), May 2011, p. 1233-1249
Zhao, Chunhui; Gao, Furong Article
A two-step basis vector extraction strategy for multiset variable correlation analysis
Chemometrics and intelligent laboratory systems, v. 107, (1), May 2011, p. 147-154
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli Article
Batch process monitoring based on support vector data description method
Journal of process control, v. 21, (6), July 2011, p. 949-959
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
Bayesian migration of Gaussian process regression for rapid process modeling and optimization
Chemical engineering journal, v. 166, (3), February 2011, p. 1095-1103
Yan, Wenjin; Hu, Shuangquan; Yang, Yanhui; Gao, Furong; Chen, Tao Article
Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics
ISA transactions, v. 50, (2), 2011, p. 239-248
Liu, Tao; Gao, Furong Article
Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes
AIChE journal, v. 57, (2), February 2011, p. 388-403
Zhao, Chunhui; Gao, Furong; Niu, Dapeng; Wang, Fuli Article
Mixture probabilistic PCR model for soft sensing of multimode processes
Chemometrics and intelligent laboratory systems, v. 105, (1), January 2011, p. 91-105
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
Multiphase calibration modeling and quality interpretation by priority sorting
Chemical engineering science, v. 66, (21), November 2011, p. 5400-5409
Zhao, Chunhui; Gao, Furong Article
Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms
Industrial & engineering chemistry research, v. 50, (23), 2011, p. 13427-13434
Wang, Youqing; Tuo, Jianyong; Zhao, Zhong; Gao, Furong Article
Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost
Industrial & engineering chemistry research, v. 50, (5), March 2011, p. 2994-3003
Kong, Xiangsong; Yang, Yi; Chen, Xi; Shao, Zhijiang; Gao, Furong Article
Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays
Journal of process control, v. 21, (7), August 2011, p. 987-996
Wang, Limin; Mo, Shengyong; Zhou, Donghua; Gao, Furong Article
Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy
AIChE journal, v. 57, (5), May 2011, p. 1202-1215
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Statistical analysis and online monitoring for handling multiphase batch processes with varying durations
Journal of process control, v. 21, (6), July 2011, p. 817-829
Zhao, Chunhui; Mo, Shengyong; Gao, Furong; Lu, Ningyun; Yao, Yuan Article
Two-dimensional Bayesian monitoring method for nonlinear multimode processes
Chemical engineering science, v. 66, (21), November 2011, p. 5173-5183
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Article
GPC control of hot-runner temperature in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2011, p. 2426-2430
Zhou, Feng; Yang, Yi; Gao, Furong Conference paper
Improved two-dimensional dynamic batch process monitoring with support vector data description
IFAC Proceedings Volumes (IFAC-PapersOnline), v. 18, (PART 1), 2011, p. 13133-13138
Ge, Zhiqiang; Gao, Furong; Song, Zhihuan Conference paper
Multivariate statistical monitoring of multiphase batch processes with uneven operation durations
2011 4th International Symposium on Advanced Control of Industrial Processes, ADCONIP 2011, Hangzhou, China, 2011, p. 54-59
Yao, Yuan; Dong, Weiwei; Zhao, Luping; Gao, Furong Conference paper

2010 29

A frequency domain step response identification method for continuous-time processes with time delay
Journal of process control, v. 20, (7), 2010, AUG, p. 800-809
Liu, Tao; Gao, Furong Article
A novel mechatronic design of a 3D laser scanning system
International journal of advanced mechatronic systems, v. 2, (1-2), 2010, p. 124-131
Ma, Zi; Wang, Yang; Li, Aiguo; Gao, Furong; Zhu, Quanmin Article
A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data
AIChE journal, v. 56, (1), 2010, JAN, p. 196-206
Zhao, Chunhui; Gao, Furong; Yao, Yuan; Wang, Fuli Article
An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure
AIChE journal, v. 56, (6), 2010, JUN, p. 1519-1535
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Automatic Velocity Profile Determination for Uniform Filling in Injection Molding
Polymer engineering and science, v. 50, (7), 2010, JUL, p. 1358-1371
Chen, Xi; Zhang, Lei; Kong, Xiangsong; Lu, Junde; Gao, Furong Article
Closed-loop step response identification of integrating and unstable processes
Chemical engineering science, v. 65, (10), 2010, MAY 15, p. 2884-2895
Liu, Tao; Gao, Furong Article
Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution
Journal of Applied Electrochemistry, v. 40, (10), 2010, OCT, p. 1797-1805
Qin, Xusong; Gao, Furong; Chen, Guohua Article
IMC-based iterative learning control for batch processes with uncertain time delay
Journal of process control, v. 20, (1), 2010, JAN, p. 173-180
Liu, Tao; Gao, Furong; Wang, Youqing Article
Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis
Industrial & engineering chemistry research, v. 49, (18), 2010, SEP 15, p. 8694-8704
Zhao, Chunhui; Gao, Furong Article
Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem
Control engineering practice, v. 18, (1), 2010, JAN, p. 67-76
Xue, Yali; Li, Donghai; Gao, Furong Article
Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information
Journal of Process Control, v. 20, (10), 2010, p. 1188-1197
Yao, Yuan; Chen, Tao; Gao, Furong Article
New insight into internal model control filter design for load disturbance rejection
IET CONTROL THEORY AND APPLICATIONS, v. 4, (3), 2010, MAR, p. 448-460
Liu, Tao; Gao, Furong Article
Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring
Industrial & engineering chemistry research, v. 49, (2), 2010, JAN 20, p. 669-681
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties
Chemical Engineering Science, v. 65, (23), 2010, p. 6134-6144
Liu, Tao; Gao, Furong Article
Statistical analysis and online monitoring for multimode processes with between-mode transitions
Chemical engineering science, v. 65, (22), 2010, NOV 15, p. 5961-5975
Zhao, Chunhui; Yao, Yuan; Gao, Furong; Wang, Fuli Article
Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information
Industrial & engineering chemistry research, v. 49, (20), 2010, OCT 20, p. 9961-9969
Yao, Yuan; Gao, Furong Article
Step response identification under inherent-type load disturbance with application to injection molding
Industrial and Engineering Chemistry Research, v. 49, (22), 2010, p. 11572-11581
Liu, Tao; Zhou, Feng; Yang, Yi; Gao, Furong Article
基于时段的间歇过程统计建模、在线监测及质量预报
自动化学报=Acta Automatica Sinica, v. 36, (3), March 2010, p. 366-374
趙春暉; 王福利; 姚遠; 高福榮 Article
Advanced Process Identification and Control
Advanced Process Identification and Control / Springer, 2010, 13 chapters
Liu, Tao; Gao, Furong Book
Control System for Injection Molding Process
7th International Conference on Advanced Molding and Materials Processing Technology, Wuhan, China, Vol. 1, pp. 113-133, Sept 10-12, (2010)
Yang, Yi; Yao, ke; Gao, Furong Conference paper
Design of an advanced injection molding control system
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 553-557
Yang, Y.; Yao, K.; Gao, F. Conference paper
Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 67-72
Liu, Tao; Gao, Furong Conference paper
Extruder Temperature Control Using Multivariable Generalized Predictive Control
7th International Conference on Advanced Molding and Materials Processing Technology, Vol. 1, pp. 106-112, Sept 10-12, (2010)
Jiang, Zhijun; Yang, Yi; Gao, Furong Conference paper
FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, ~ July 4-8, 2010 Banff (Canada)
Yao, ke; Gao, Furong Conference paper
Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation
IFAC proceedings volumes, v. 9, (PART 1), 2010, p. 355-360
Zhao, Chunhui; Gao, Furong Conference paper
INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM
the Polymer Processing Society 26th Annual Meeting ~ PPS-26, July 4-8, 2010 Banff (Canada)
Shi, Jia; Yang, Yi; Gao, Furong Conference paper
Injection molding process monitoring and control
2010 先進精密模具設備及檢測, 清雲科技大學，台灣, 9 April, 2010
Gao, Furong Conference paper
On-line in-mold transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 571-575
Yao, Ke; Yang, Yi; Zhou, Feng; Gao, Furong Conference paper
The applications of multivariate statistical methods in injection molding process monitoring
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 2010, p. 565-570
Yao, Yuan; Yang, Yi; Yao, Ke; Gao, Furong Conference paper

2009 27

A generalized relay identification method for time delay and non-minimum phase processes
Automatica, v. 45, (4), 2009, APR, p. 1072-1079
Liu, Tao; Gao, Furong Article
A survey on multistage/multiphase statistical modeling methods for batch processes
Annual reviews in control, v. 33, (2), 2009, DEC, p. 172-183
Yao, Yuan; Gao, Furong Article
Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance
Industrial & engineering chemistry research, v. 48, (24), 2009, DEC 16, p. 11060-11070
Yao, Yuan; Zhao, Chunhui; Gao, Furong Article
Covariance-oriented qualitative and quantitative calibration analysis for multistage batch processes
Canadian Journal of Chemical Engineering, v.87, (3), 2009, Jun, p. 466-476
Zhao, Chunhui; Wang, Fuli; Gao, Furong Article
Generalized predictive control of linear systems with actuator arrearage faults
Journal of process control, v. 19, (5), 2009, MAY, p. 803-815
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Identification and Autotuning of Temperature-Control System With Application to Injection Molding
IEEE transactions on control systems technology, v. 17, (6), 2009, NOV, p. 1282-1294
Liu, Tao; Yao, Ke; Gao, Furong Article
Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction
Chemometrics and intelligent laboratory systems, v. 95, (2), 2009, FEB 15, p. 107-121
Zhao, Chunhui; Wang, Fuh; Gao, Furong Article
In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding
International polymer processing, v. 24, (3), 2009, JUL, p. 253-260
Zhou, Feng; Yao, Ke; Chen, Xiaohong; Gao, Furong Article
Model Migration for Development of a New Process Model
Industrial & engineering chemistry research, v. 48, (21), 2009, NOV 4, p. 9603-9610
Lu, Junde; Yao, Yuan; Gao, Furong Article
Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes
Journal of process control, v. 19, (10), 2009, DEC, p. 1716-1724
Yao, Yuan; Gao, Furong Article
Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)
Industrial & engineering chemistry research, v. 48, (20), 2009, OCT 21, p. 9163-9174
Zhao, Chunhui; Gao, Furong; Wang, Fuli Article
Phase and transition based batch process modeling and online monitoring
Journal of process control, v. 19, (5), 2009, MAY, p. 816-826
Yao, Yuan; Gao, Furong Article
Process Similarity and Developing New Process Models Through Migration
AIChE journal, v. 55, (9), 2009, SEP, p. 2318-2328
Lu, Junde; Yao, Ke; Gao, Furong Article
Survey on iterative learning control, repetitive control, and run-to-run control
Journal of process control, v. 19, (10), 2009, DEC, p. 1589-1600
Wang, Youqing; Gao, Furong; Doyle, III, Francis J. Article
Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region
Industrial & engineering chemistry research, v. 48, (2), 2009, JAN 21, p. 837-843
Yao, Yuan; Diao, Yinghu; Lu, Ningyun; Lu, Junde; Gao, Furong Article
Injection Molding Control
Injection molding: technology and fundamentals / Edited by Musa R. Kamal, AvramI. Isayev, Shih-Jung Liu. Munich : Hanser, 2009, p. 0-926
Gao, Furong; Yang, Yi Book chapter
A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 1746-1751
Shi, Jia; Gao, Furong; Jiang, Qingying; Cao, Zikai Conference paper
An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 893-898
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli Conference paper
Batch process control from practice to 2D model predictive control
2009 Chinese Control and Decision Conference, CCDC 2009, 2009
Yao, Ke; Yang, Yi; Gao, Furong Conference paper
Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, pp. 999-1004, Vol. 2, July 12-15, 2009, Istanbul, Turkey
Yao, Yuan; Gao, Furong Conference paper
Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques
The 8th World Congress of Chemical Engineering, Montreal, 23-27 August, 2009
Qin, Xusong; Gao, Furong; Chen, Guohua Conference paper
Fault-tolerant control for batch processes - Overview and outlook
2009 Chinese Control and Decision Conference, CCDC 2009, 2009, p. 908-913
Wang, Youqing; Zhou, Donghua; Gao, Furong Conference paper
Identification of low-order process model with time delay from closed-loop step test
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 2587-2591
Liu, Tao; Gao, Furong; Zhao, Chunhui Conference paper
Identification of low-order unstable process model from closed-loop step test
ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes, v.7, (1), 2009, p. 447-451, July, Istanbul, Turkey
Liu, Tao; Gao, Furong Conference paper
Identification of time delay model for integrating processes from closed-loop step test
Proceedings of 2009 7th Asian Control Conference, ASCC 2009, 2009, p. 615-619
Liu, Tao; Gao, Furong; Zhao, Chunhui Conference paper
Improved independent component regression modeling
Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes, 2009, p. 1507-1512
Zhao, Chunhui; Gao, Furong; Liu, Tao; Wang, Fuli Conference paper
Iterative learning control of mold-open position in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 5, 2009, p. 2946-2950
Mo, Shengyong; Yang, Yi; Gao, Furong Conference paper

2008 20

A systematic approach for on-line identification of second-order process model from relay feedback test
AIChE journal, v. 54, (6), 2008, JUN, p. 1560-1578
Liu, Tao; Gao, Furong; Wang, Youqing Article
Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test
Industrial & engineering chemistry research, v. 47, (4), 2008, FEB 20, p. 1140-1149
Liu, Tao; Gao, Furong Article
Barrel temperature control during operation transition in injection molding
Control engineering practice, v. 16, (11), 2008, NOV, p. 1259-1264
Yao, Ke; Gao, Furong; Allgoewer, Frank Article
Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding
Sensors and Actuators a-physical, v. 141, (2), 2008, FEB 15, p. 712-722
Wong, Ho Yin; Fung, Ka Tsai; Gao, Furong Article
Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes
Industrial & engineering chemistry research, v. 47, (24), 2008, DEC 17, p. 9996-10008
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Zhang, Yingwei Article
Identification of integrating and unstable processes from relay feedback
Computers & chemical engineering, v. 32, (12), 2008, DEC 22, p. 3038-3056
Liu, Tao; Gao, Furong Article
Injection Molding Control: From Single Cycle to Batch Control
Advances in polymer technology, v. 27, (4), 2008, WIN, p. 217-223
Yang, Yi; Yao, Ke; Gao, Furong Article
Iterative learning model predictive control for multi-phase batch processes
Journal of process control, v. 18, (6), 2008, JUL, p. 543-557
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Iterative learning reliable control of batch processes with sensor faults
Chemical engineering science, v. 63, (4), 2008, FEB, p. 1039-1051
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Model Migration with Inclusive Similarity for Development of a New Process Model
Industrial & engineering chemistry research, v. 47, (23), 2008, DEC 3, p. 9508-9516
Lu, Junde; Gao, Furong Article
Process Modeling based on process similarity
Industrial & engineering chemistry research, v. 47, (6), 2008, MAR 19, p. 1967-1974
Lu, Junde; Gao, Furong Article
Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance
IEEE transactions on automatic control, v. 53, (11), 2008, DEC, p. 2690-2695
Liu, Tao; Gao, Furong Article
Subspace identification for two-dimensional dynamic batch process statistical monitoring
Chemical engineering science, v. 63, (13), 2008, JUL, p. 3411-3418
Yao, Yuan; Gao, Furong Article
Variable structure control for a class of nonlinear systems with mismatched uncertainties
Applied mathematics and computation, v. 200, (1), 2008, JUN 15, p. 387-400
Wang, Youqing; Jiang, Canghua; Zhou, Donghua; Gao, Furong Article
An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model
18th INTERNATIONAL CONGRESS OF CHEMICAL AND PROCESS ENGINEERING, Vol. 4, p1332, 24-28 AUGUST 2008, PRAGUE, CZECH REPUBLIC
Zhang, Lei; Chen, Xi; Gao, Furong Conference paper
Barrel Temperature Control in Injection Moulding Process
Symposium on Advanced Molding Technology and Materials Processing, SANTMP'08, Beijing, China. 16-17 November, 2008
Yao, Ke; Yang, Yi; Gao, Furong Conference paper
Injection moulding control and optimization: from applied research to academic research
北京自動化學會年會, 15 November, 2008. Beijing University of Science and Technology, Beijing
Gao, Furong Conference paper
Multi-phase batch process monitoring
中國國家自然科學基金委雙清論壇, 北京西郊賓館, 4－7 November, 2008
Gao, Furong Conference paper
Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 10933-10938
Liu, Tao; Gao, Furong Conference paper
Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement
17th IFAC World Congress, Seoul, Korea, 6-11 July 2008, p. 4499-4510
Yao, Yuan; Gao, Furong Conference paper

2007 16

Active fault-tolerant control of nonlinear batch processes with sensor faults
Industrial & engineering chemistry research, v. 46, (26), 2007, DEC 19, p. 9158-9169
Wang, Youqing; Yang, Yi; Zhou, Donghua; Gao, Furong Article
Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data
Industrial and Engineering Chemistry Research, v. 46, (14), 2007, p. 4943-4953
Zhao, Chunhui; Wang, Fuli; Gao, Furong; Lu, Ningyun; Jia, Mingxing Article
Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays
Journal of process control, v. 17, (2), 2007, FEB, p. 173-188
Liu, Tao; Zhang, Weidong; Gao, Furong Article
Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays
Industrial & engineering chemistry research, v. 46, (20), 2007, SEP 26, p. 6546-6557
Liu, Tao; Zhang, Weidong; Gao, Furong Article
Application of a capacitive transducer for online part weight prediction and fault detection in injection molding
Polymer engineering and science, v. 47, (4), 2007, APR, p. 347-353
Fung, Ka Tsai; Gao, Furong; Chen, Xi Article
Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)
Industrial & engineering chemistry research, v. 46, (24), 2007, NOV 21, p. 8033-8043
Yao, Yuan; Gao, Furong Article
Optimal start-up control of injection molding barrel temperature
Polymer engineering and science, v. 47, (3), 2007, MAR, p. 254-261
Yao, Ke; Gao, Furong Article
Optimization of decentralized PI/PID controllers based on genetic algorithm
Asian journal of control, v. 9, (3), 2007, SEP, p. 306-316
Li, Donghai; Gao, Furong; Xue, Yali; Lu, Chongde Article
Robust fault-tolerant control of a class of non-minimum phase nonlinear processes
Journal of process control, v. 17, (6), 2007, JUL, p. 523-537
Wang, Youqing; Zhou, Donghua; Gao, Furong Article
Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes
Journal of process control, v. 17, (9), 2007, OCT, p. 715-727
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
新型注塑螺杆性能研究
塑料工業=China Plastics Industry, v. 2007, (6), 2007, p. 23-25
金志明; 高福榮 Article
Batch Process Modeling Based on Process Similarity
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, 6-8 June, 2007, Vol. 2, pp. 379-384, 6-8 June, 2007
Lu, Junde; Gao, Furong Conference paper
Control of Multi-Phase Batch Processes: Formulation and Challenge
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 339-344, 6-8 June, 2007
Wang, Youqing; Yang, Yi; Gao, Furong; Zhou, Donghua Conference paper
Electrocoagulation and Electroflotation of Restaurant Wastewater – Pilot Plant Study
Advanced Technologies for Environmental Remediation – A Symposium in Honour of Professor Po Lock Yue, Hong Kong, June 15, 2007.
Qin, Xusong; Gao, Furong; Chen, Guohua Conference paper
Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 2, pp. 243-248, 6-8 June, 2007
Shi, Jia; Gao, Furong Conference paper
Two-Dimensional Dynamic PCA with Auto-Selected Support Region
8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, Vol. 1, pp. 69-74, 6-8 June, 2007
Yao, Yuan; Lu, Ningyun; Gao, Furong Conference paper

2006 18

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4603-4616
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes
Industrial & engineering chemistry research, v. 45, (13), 2006, JUN 21, p. 4617-4628
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model
Polymer engineering and science, v. 46, (4), 2006, APR, p. 540-548
Yang, Yi; Gao, Furong Article
Iterative learning fault-tolerant control for batch processes
Industrial & engineering chemistry research, v. 45, (26), 2006, DEC 20, p. 9050-9060
Wang, Youqing; Shi, Jia; Zhou, Donghua; Gao, Furong Article
Kernel classifier with adaptive structure and fixed memory for process diagnosis
AIChE journal, v. 52, (10), 2006, OCT, p. 3515-3531
Wang, Haiqing; Li, Ping; Gao, Furong; Song, Zhihuan; Ding, Steven X. Article
Profiling of injection velocity for uniform mold filling
Advances in polymer technology, v. 25, (1), 2006, SPR, p. 13-21
Chen, Xi; Gao, Furong Article
Robust fault detection and isolation for uncertain linear retarded systems
Asian journal of control, v. 8, (2), 2006, JUN, p. 141-152
Jiang, Canghua; Zhou, Donghua; Gao, Furong Article
Robust iterative learning control design for batch processes with uncertain perturbations and initialization
AIChE journal, v. 52, (6), 2006, JUN, p. 2171-2187
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Stage-based online quality control for batch processes
Industrial & engineering chemistry research, v. 45, (7), 2006, MAR 29, p. 2272-2280
Lu, Ningyun; Gao, Furong Article
Statistical modeling and online monitoring for batch processes
Zidonghua Xuebao/Acta Automatica Sinica, v. 32, (3), 2006, p. 400-410
Lu, Ningyun; Wang, Fuli; Gao, Furong; Wang, Shu Article
间歇过程的统计建模与在线监测
自动化学报, v. 32, (3), May 2006, p. 400-410
陆宁云; 王福利; 高福荣; 王姝 Article
2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 215-220, Brazil, April 2-5, 2006
Shi, Jia; Gao, Furong; Wu, Tie-Jun Conference paper
Development of A Capacitive Sensor for Injection Molding
Control of Particulate Processes VII, Engineering Conferences International, Harrison Hot Springs, BC, Canada, 29 October – 2 November, 2006
Gao, Furong; Wong, Ho Yin; Fung, Ka Tsai; Chen, Xi Conference paper
Injection Molding Control & Monitoring
第17屆中國過程控制會議, 2006年7月31日－8月3日, 無錫, China (大會報告)
Gao, Furong Conference paper
INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. 1, pp. 385-390, Brazil, April 2-5, 2006
Yang, Yi; Gao, Furong Conference paper
Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer
Proceedings - 2006 Academic Workshop on Advanced Forming Technology and Materials Processing，AWAFTMP'06, Shanghai, China. 21-25 October, 2006, pp. 38-46
Gao, Furong; Fung, Ka Tsai; Chen, Xi; Yang, Yi Conference paper
PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE
8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006), Vol. II, pp. 951- 956, Brazil, April 2-5, 2006
Lu, Ningyun; Yao, Yuan; Gao, Furong Conference paper
注射成型用高性价比傳感器
中國塑料加工工業協會塑料技術協作委員會, 2006年會暨塑料工業高新技術及產業化研討會 (Plastech2006), 12-15 August, 2006
Gao, Furong Conference paper

2005 21

Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation
Journal of Applied Electrochemistry, v. 35, (2), 2005, FEB, p. 185-191
Chen, Xueming; Gao, Furong; Chen, Guohua Article
Effect of dielectric material on microwave freeze drying of skim milk
Drying technology, v. 23, (1-2), 2005, p. 317-340
Wang, Wei; Chen, Guohua; Gao, Furong Article
Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model
Industrial & engineering chemistry research, v. 44, (21), 2005, OCT 12, p. 8095-8105
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
MADDOCK注塑螺杆性能研究
塑料=Plastics, v. 2005, (05), 2005, p. 77-80+31
金志明; 高福榮 Article
On-line detection of the gate freezing-off time for injection molding
Polymer engineering and science, v. 45, (1), 2005, JAN, p. 33-41
Chen, Xi; Gao, Furong Article
Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system
Journal of process control, v. 15, (8), 2005, DEC, p. 907-924
Shi, Jia; Gao, Furong; Wu, Tie-Jun Article
Stage-based process analysis and quality prediction for batch processes
Industrial & engineering chemistry research, v. 44, (10), 2005, MAY 11, p. 3547-3555
Lu, Ningyun; Gao, Furong Article
Two-dimensional dynamic PCA for batch process monitoring
AIChE journal, v. 51, (12), 2005, DEC, p. 3300-3304
Lu, Ningyun; Yao, Yuan; Gao, Furong; Wang, Fuli Article
注射成型塑化过程的可视化实验研究
中国塑料=China Plastics, v. 2005, (09), 2005, p. 73-76
金志明; 馬艷娥; 高福榮 Article
间歇过程滑动窗口子时段PCA建模和在线监测
控制与决策=Control and Decision, v. 2005, (09), 2005, p. 1034-1037
郭小萍; 陸寧云; 高福榮; 王福利 Article
塑料成型过程控制
《工业过程控制技术》应用篇 / 2005, Chapter 5, p. 131-180
Gao, Furong Book chapter
Adaptive GPC control of barrel temperatures in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 378-382
Yao, Ke; Gao, Furong Conference paper
In-Mold Monitoring of Injection using capacitive transducer
Advanced Forming Technology – 2005 Cross-Strait Academic Workshop on Advanced Technology of Materials Forming and Die/Mold (AWATMFDM"05), Xi"an, China, August 12-15, p. 447-460
Gao, Furong; Fung, Ka Tsai; Chen, Xi Conference paper
On-line check-ring failure detection and compensation in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 3, 2005, p. 49-53
Yang, Yi; Gao, Furong Conference paper
Part weight prediction using capacitive transducer in injection molding
Annual Technical Conference - ANTEC, Conference Proceedings, v. 2, 2005, p. 388-392
Fung, Ka Tsai; Gao, Furong; Chen, Xi Conference paper
Part Weight Prediction Using Captive Transduer in Injection Molding
Society of Plastics Engineers Annual Technical Conference, ANTEC 2005, Boston, USA, v.2, May 1-5 2005, p. 823-827
Fung, Ka Tsai; Gao, Furong; Chen, Xi Conference paper
Prospective of Injection Molding Control and Monitoring
《中國塑料》論壇 — 塑料注塑新技術國際研討會, pp. 111-126, 12-14 July 2005, Shanghai, China
Gao, Furong; Yang, Yi Conference paper
基于在線測量技術的注塑成型塑化系統研究
2005《中國塑料》論壇—— 塑料注塑新技術國際研討會。, pp. 132-136, 12-14 July, 2005, Shanghai, China
Jin, Zhiming; Gao, Furong Conference paper
基于在线测量技术的注塑成型塑化系统研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005,p. 132-136
金志明; 高福荣 Conference paper
注塑成型中的熔体温度均匀性研究
《中国塑料》论坛—— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 340-346
金志明; 朱复华; 高福荣 Conference paper
注塑成型塑化过程的可视化研究
《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 343-346
金志明; 朱复华; 高福荣 Conference paper

2004 17

A soft-sensor development for melt-flow-length measurement during injection mold filling
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 384, (1-2), 2004, OCT 25, p. 245-254
Chen, Xi; Gao, Furong; Chen, Guohua Article
An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding
Polymer engineering and science, v. 44, (7), 2004, JUL, p. 1313-1318
Jin, Zhi Ming; Gao, Furong; Zhu, Fuhua Article
Capacitive transducer for in-mold monitoring of injection molding
Polymer engineering and science, v. 44, (8), 2004, AUG, p. 1571-1578
Chen, Xi; Chen, Guohua; Gao, Furong Article
Multirate dynamic inferential modeling for multivariable processes
Chemical engineering science, v. 59, (4), 2004, MAR, p. 855-864
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Article
PCA-based modeling and on-line monitoring strategy for uneven-length batch processes
Industrial & engineering chemistry research, v. 43, (13), 2004, JUN 23, p. 3343-3352
Lu, Ningyun; Gao, Furong; Yang, Yi; Wang, Fuli Article
Sub-PCA modeling and on-line monitoring strategy for batch processes
AIChE journal, v. 50, (1), 2004, JAN, p. 255-259
Lu, Ningyun; Gao, Furong; Wang, Fuli Article
Advanced Control of Chemical Processes
Advanced Control of Chemical Processes / v. 1&2, 2004
Allgower, Frank; Gao, Furong Book
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier Limited, 2004
Allg?wer, Frank; Gao, Furong Book
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004
Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004 / Edited by Frank Allg?wer, Furong Gao. Oxford: Elsevier, 2004
Allg?wer, Frank; Gao, Furong Book
A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 746-750
Ma, Liling; Wang, Fuli; Jiang, Yunbo; Gao, Furong Conference paper
A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT
Pre-print of 7th International Symposium on Adavanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 873-878
Shao, Cheng; Juan, Juan Nie; Gao, Furong Conference paper
A stage-based monitoring method for batch process with minimal reference data
DYCOPS 2004, Boston USA, July 5-7 2004
Lu, Ningyun; Yang, Yi; Wang, Fuli; Gao, Furong Conference paper
Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 879-884
Shao, Cheng; Luo, Guangjun; Gao, Furong Conference paper
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
Proceedings of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 639-644
Yang, Yi; Gao, Furong Conference paper
SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN
Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, January 11-14 2004, p. 740-745
Chang, Yuqing; Wang, Fuli; Gao, Furong Conference paper
Stage-Based Multivariate Statistical Analysis for Injection Molding
7th International Symposium on Advanced Control of Chemical Processes, Hong Kong, 11-14 January, pp. 471-476
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper
Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression
PPS-20 (Polymer Processing Society Annual Conference), Akron, Ohio, USA, June 20-24 2004
Yang, Yi; Gao, Furong Conference paper

2003 14

A study of packing profile on injection molded part quality
Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING, v. 358, (1-2), 2003, OCT 15, p. 205-213
Chen, Xi; Gao, Furong Article
Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis
Industrial & engineering chemistry research, v. 42, (18), 2003, SEP 3, p. 4198-4207
Lu, Ningyun; Wang, Fuli; Gao, Furong Article
High-performance Ti/BDD electrodes for pollutant oxidation
Environmental science & technology, v. 37, (21), 1 November 2003, Pages 5021-5026
Chen, Xueming; Chen, Guohua; Gao, Furong; Yue, Po Lock Article
Robust Stability of Optimal Iterative Learning Control and Application to Injection Molding Machine
自动化学报=Acta Automatica Sinica, v. 2003, (01), 2003, p. 72-79
邵誠; 高福榮; 楊毅 Article
塑料注射成型熔融过程中的固相破碎现象
中国塑料, v. 17, (2), 2003, p. 94-97
金志明; 朱复华; 高福荣 Article
注射成型中的熔体温度均匀性研究
中国塑料, v. 17, (3), 2003, p. 88-91
金志明; 朱复华; 高福荣 Article
注射成型塑化过程的可视化研究
中国塑料, v. 17, (4), 2003, p. 6-90
金志明; 朱复华; 高福荣 Article
A Fault Accomodation Control for Nonlinear Processes
ADCHM 2003, Hong Kong, 18-20 June
Zhang, Yingwei; Wang, Fuli; Yu, Ge; Gao, Furong Conference paper
Injection Molding Control: Challenge and Prospective
7th International Conference on Manufacturing Technology: Global Manufacturing & Innovation, Chiang Chen Industrial Charity Foundation, Hong Kong Convention Center, 7-9 December
Gao, Furong Conference paper
Multi-PCA Models for Process Monitoring and Fault Diagnosis
ADCHM 2003, Hong Kong
Ma, Liling; Jiang, Yubao; Wang, Fuli; Gao, Furong Conference paper
Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column
ADCHM 2003, Hong Kong, 18-20 June
Shao, Cheng; Luo, Guangjun; Gao, Furong Conference paper
Setting of Injection Molding Packing profile
Advanced Molding and Mold Conference, 94-99
Gao, Furong; Chen, Xi Conference paper
Setting of Injection Velocity Profile via an Iterative Learning Control Approach
ADCHM 2003, Hong Kong, 18-20 June
Yang, Yi; Gao, Furong Conference paper
Stage-Based Multivariate Statistical Analysis for Injection Molding
ADCHM 2003, Hong Kong, 18-20 June
Lu, Ningyun; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper

2002 8

Bound estimation for solutions of a class of delay differential inequalities
NONLINEAR analysis-theory METHODS & APPLICATIONS, v. 49, (4), 2002, MAY, p. 525-533
Gao, Furong; Hou, Chunhai Article
Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities
Journal of optimization theory and applications, v. 113, (3), 2002, JUN, p. 621-634
Yu, Li; Gao, Furong Article
Processing of PC/LCP in situ composites by closed-loop injection molding
Composites science and technology, v. 62, (6), 2002, p. 757-765
Chan, Hong Shing; Leng, Yang; Gao, Furong Article
基于质量的注塑过程建模方法研究：最优保压压力曲线的设定
中国塑料, v. 16, (51), 2002
陈曦; 高福荣; 钱积新 Article
注塑过程熔体充填长度的动态神经网络软测量模型
化工自动化及仪表, v. 29, (2), 2002, p.43-46
陈曦; 钱积新; 高福荣 Article
Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.
Intelligent Control of Injection Molding Process / June 2002
Gao, Furong Book
A control strategy for process with output dynamic nonlinearity
Recent Developments in optimization and optimal control in chemical engineering, Research Signpost / 115-127
Wang, Fuli; Gao, Furong; Li, Mingzhong Book chapter
Solid-bed break-up during plastication in injection molding
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 572-575
Jin, Zhiming; Gao, Furong Conference paper

2001 10

Analysis and Implementation of the Double-Controller Scheme
Developments in Chemical Engineering and Mineral Processing, v. 9, (1-2), 2001, p. 57-68
Tian, Y.C.; Gao, Furong Article
Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 79, (2), 2001, APR, p. 263-272
Li, Mingzhong; Yang, Yi; Gao, Furong; Wang, Fuli Article
H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach
International Journal of Systems Science, v. 32, (7), 2001, JUL, p. 905-913
Hou, CH; Gao, FR Article
Identification and control of nonlinear processes in the presence of unmeasured load disturbances
Industrial & engineering chemistry research, v. 40, (10), 2001, MAY 16, p. 2275-2282
Li, Mingzhong; Wang, Fuli; Gao, Furong Article
Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays
Journal of the Franklin Institute, v. 338, (1), 2001, p. 101-110
Li, Yu; Gao, Furong Article
PID-based sliding mode controller for nonlinear processes
Industrial & engineering chemistry research, v. 40, (12), 2001, JUN 13, p. 2660-2667
Li, Mingzhong; Wang, Fuli; Gao, Furong Article
Robust iterative learning control with applications to injection molding process
Chemical engineering science, v. 56, (24), 2001, DEC, p. 7025-7034
Gao, Furong; Yang, Yi; Shao, Cheng Article
Strategies for injection filling velocity control
Journal of reinforced plastics and composites, v. 20, (13), 2001, p. 1160-1170
Yang, Yi; Gao, Furong Article
Fuzzy modeling for injection molded part quality control
Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA, 1, 629-632
Yang, Yi; Gao, Furong Conference paper
Optimal iterative learning control with uncertain initializations and disturbances
6th IFAC Symposium on Dynamics and control of process systems, Chejudo Island, Korea, June 4-6 2001, p. 437-442
Shao, Cheng; Yang, Yi; Gao, Furong; Wang, Fuli Conference paper

2000 15

A simple nonlinear controller with diagonal recurrent neural network
Chemical engineering science, v. 55, (7), 2000, APR, p. 1283-1288
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
A visual barrel system for study of reciprocating screw injection molding
Polymer engineering and science, v. 40, (6), 2000, JUN, p. 1334-1343
Gao, Furong; Jin, Zhi Ming; Chen, Xi Article
Adaptive control of the filling velocity of thermoplastics injection molding
Control engineering practice, v. 8, (11), 2000, NOV, p. 1285-1296
Yang, Yi; Gao, Furong Article
An analytical predictive control law for a class of nonlinear processes
Industrial & engineering chemistry research, v. 39, (6), 2000, JUN, p. 2029-2034
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Improved delay time estimation of RC ladder networks
IEEE TRANSACTIONS on Circuits and SYSTEMS i-fundamental THEORY and APPLICATIONS, v. 47, (2), 2000, FEB, p. 242-246
Hou, Chun Hai; Gao, Furong; Qian, Jixin Article
Mathematical Modeling of a Continuous Galvanizing Annealing Furnace
Developments in Chem Eng & Mineral Processing, v. 8, (3/4), 2000, p.359-374
Tian, Yuchu; Hou, Chunhai; Gao, Furong Article
Neural network approach to predict melt temperature in injection molding processes
Chinese Journal of Chemical Engineering, v. 8, (4), 2000, DEC, p. 326-331
Wang, BG; Gao, FR; Yue, PL Article
Neural network-based optimal iterative controller for nonlinear processes
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v. 78, (2), 2000, APR, p. 363-370
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Predictive control for processes with input dynamic nonlinearity
Chemical engineering science, v. 55, (19), 2000, OCT, p. 4045-4052
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
A Transparent barrel for study of reciprocating screw injection molding
Society of Plastics Engineers, Annual Technical Conference (ANETC2000), Orlando, USA, May 7-11 2000, p. 523-527
Gao, Furong; Jin, Zhiming; Chen, Xi Conference paper
An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation
ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, p. 633-637
Chen, X.; Gao, FR Conference paper
Guaranteed cost control of uncertain discrete linear time-delay systems
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 2481-2485
Yu, Li; Gao, Furong; Xue, Anke Conference paper
Modelling and control of processes with output dynamic nonlinearity
American Control Conference 2000, Chicago, Illinois, USA, June 28-30 2000, p. 240-244
Wang, Fuli; Gao, Furong; Li, Mingzhong Conference paper
Robust adaptive control of bilinear plants with high-order perturbation uncertainties
Proceedings of the IEEE Conference on Decision and Control, v. 5, 2000, p. 4934-4938
Gao, Furong; Shao, Cheng; Wang, Fuli; Wang, Wei Conference paper
Robust H∞ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties
The 39th IEEE Conference on Decision and Control, Sydney, Australia, December 12-15 2000, p. 2754-2755
Yu, Li; Gao, Furong Conference paper

1999 20

A neural-network-based nonlinear controller using an extended Kalman filter
Industrial & engineering chemistry research, v. 38, (6), 1999, JUN, p. 2345-2349
Gao, Furong; Wang, Fuli; Li, Mingzhong Article
Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding
Polymer engineering and science, v. 39, (1), 1999, JAN, p. 3-17
Tsoi, Hoi Pang; Gao, Furong Article
Control of integrator processes with dominant time delay
Industrial & engineering chemistry research, v. 38, (8), 1999, AUG, p. 2979-2983
Tian, Yu Chu; Gao, Furong Article
Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations
Journal of Mathematical Analysis and Applications, v. 238, (2), 1999, OCT 15, p. 558-566
Hou, Chun Hai; Gao, Furong Article
Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding
Polymer engineering and science, v. 39, (10), 1999, OCT, p. 2042-2063
Yang, Yi; Gao, Furong Article
Evaluation of gas pressure dynamics for gas-assisted injection molding process
International communications in heat and mass transfer, v. 26, (1), 1999, JAN, p. 85-93
Chao, Sher Meng; Wang, Shih Ming; Chen, Shia Chung; Gao, Furong Article
Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks
Industrial & engineering chemistry research, v. 38, (11), 1999, NOV, p. 4330-4336
Gao, Furong; Li, Mingzhong; Wang, Fuli; Wang, Baoguo; Yue, Po Lock Article
Injection velocity control of thermoplastic injection molding via a double controller scheme
Industrial & engineering chemistry research, v. 38, (9), 1999, SEP, p. 3396-3406
Tian, Yu Chu; Gao, Furong Article
Injection velocity control using a self-tuning adaptive controller
International polymer processing, v. 14, (2), 1999, JUN, p. 196-204
Yang, Yi; Gao, Furong Article
Melt temperature profile prediction for thermoplastic injection molding
Polymer engineering and science, v. 39, (9), 1999, SEP, p. 1787-1801
Zhao, Chunhui; Gao, Furong Article
Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations
Journal of Mathematical Analysis and Applications, v. 237, (2), 1999, SEP 15, p. 573-582
Hou, Chun Hai; Gao, Furong; Qian, Jixin Article
A comparison of different strategies for injection filling velocity control
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, p. 705-709
Yang, Y.; Gao, FR Conference paper
A double-controller scheme for controlling dominant delay processes
DYNAMICS & CONTROL OF PROCESS SYSTEMS 1998, VOLUMES 1 AND 2, 1999, p. 443-448
Gao, FR; Tian, YC Conference paper
Adaptive Control of Injection Velocity of Thermoplastics Injection Molding
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. N, 1999, p. 253-258
Yang, Yi; Gao, Furong Conference paper
Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding
APCChE"99, Korea, v. 2, August 1999, p. 1009-1012
Gao, Furong; Yang, Yi Conference paper
Control of Integrator Processes with Long Dead-Time
14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China, v. C, 1999, p. 277-282
Tian, Yu-Chu; Gao, Furong; Tade, Moses O.; Tang, Jinyu Conference paper
Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate
Preprints of 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 345-346
Chan, Hong Shing; Leng, Yang; Gao, Furong Conference paper
Neural Networks Prediction of Melt Temperatures at Plastication Phase
Preprints of the 2nd East Asian Polymer Conference, Hong Kong, January 12-16 1999, p. 353-354
Wang, Baoguo; Gao, Furong; Yue, Polock Conference paper
On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks
PPS-15, The Polymer Processing Society, CD-ROM, The Netherlands, May 31 - June 4 1999
Gao, Furong; Wang, Baoguo; Yue, Polock Conference paper
Predictive Control with Neuro-compensation for a Class of Nonlinear Processes
7th European Conference on Intelligent Techniques and Soft Computing, (EUFITT"99), CD-Rom, Aachen, Germany, September 13-16 1999
Gao, Furong; Wang, Fuli; Li, Mingzhong Conference paper

1998 10

Adaptive control of chaotic continuous-time systems with delay
PHYSICA d-nonlinear PHENOMENA, v. 117, (1-4), 1998, JUN 15, p. 1-12
Tian, Yu Chu; Gao, Furong Article
Adaptive control of nozzle melt packing pressure
Journal of intelligent material systems and structures, v. 9, (12), 1998, DEC, p. 1046-1050
Yang, Yi; Gao, Furong Article
Compensation of dominant and variable delay in process systems
Industrial & engineering chemistry research, v. 37, (3), 1998, MAR, p. 982-986
Tian, Yu Chu; Gao, Furong Article
Double-controller scheme for control of processes with dominant delay
IEE proceedings-control THEORY and APPLICATIONS, v. 145, (5), 1998, SEP, p. 479-484
Tian, Yu Chu; Gao, Furong Article
Double-controller scheme for separating load rejection from set-point tracking
CHEMICAL ENGINEERING RESEARCH & DESIGN, v. 76, (A4), 1998, MAY, p. 445-450
Tian, Yu Chu; Gao, Furong Article
Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.
Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding / May 1998
Gao, Furong Book
A Fuzzy Logic Controller for Injection Ram Velocity
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 44, 1998, p. 641-644
Tsoi, Hoi-Pang; Gao, Furong Conference paper
Adaptive Control of Nozzle Melt Packing Pressure
Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA, v. 1, 1998, p. 472-476
Gao, Furong; Yang, Yi Conference paper
An Experimental Analysis of Injection Molding Melt Temperature
Annual Technical Conference - ANTEC, Conference Proceedings, v. 1, 1998, p. 393-397
Zhao, Chunhua; Gao, Furong Conference paper
射出成形におけるファヅィ理論を用いた自動保壓切換
成形加工シソポヅァ, 1998, p. 273-276
Gao, Furong; Zhao, Chunhua; 平塚和人; 蔡文遠 Conference paper

1997 6

Extraction of delay information from chaotic time series based on information entropy
PHYSICA D, v. 108, (1-2), 1997, SEP 15, p. 113-118
Tian, Yu Chu; Gao, Furong Article
Injection Molding Control
Injection Molding: Fundamentals and Application / Edited by M. R. Kamal. 1997, Chapter 12, p. 451-502
Gao, Furong; Yi, Yang Book chapter
A Real-time Fuzzy Logic Controller for Ram Velocity in Injection Molding
4th International Conference on Manufacturing Technology in Hong Kong, CD-ROM, November30 - 3 December 1997
Tsoi, Hoi-Pang; Gao, Furong Conference paper
Complicated Dynamics in Simple Delay Systems
1997 China-Korea Joint Workshop on Process Systems Engineering, Hangzhou, China, June 27-29 1997, p. 58-63
Tian, Yu-Chu; Gao, Furong Conference paper
Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding
ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3, 1997, p. 480-486
Gao, Furong; Yang, Yi Conference paper
Simple delay systems with chaotic dynamics
CONTROL OF OSCILLATIONS AND CHAOS - 1997 1ST INTERNATIONAL CONFERENCE, PROCEEDINGS, VOLS 1-3, 1997, p. 319-320
Tian, Yu Chu; Gao, Furong Conference paper

1996 2

Cavity pressure control during the cooling stage in thermoplastic injection molding
Polymer engineering and science, v. 36, (19), 1996, OCT, p. 2467-2476
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article
Cavity Pressure Dynamics and Self-tuning Control for Filling and Packing Phases of Thermoplastics Injection Molding
Polymer Engineering and Science, v. 36, (9), 1996, p. 1272-1285
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article

1995 2

Adaptive Control of Cavity Pressure During Filling
Engineering Plastics, v. 8, 1995, p. 136-148
Gao, Furong; Kamal, Musa R.; Patterson, Wayne Ian Article
Cavity Pressure Adaptive Control for Thermoplastics Injection Molding
3rd International Conference on Manufacturing Technology, CD-ROM, Hong Kong, December 1995, p. 304-309
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper

1994 4

Self‐tuning cavity pressure control of injection molding filling
Advances in Polymer Technology, 13, 1994
Gao, Furong; Patterson, Wayne Ian; Kamal, Musa R. Article
Cavity Pressure Control during Cooling
Society of Plastics Engineers, Annual Technical Conference (ANTEC'94), San Francisco, USA, May 1994, p. 706-711
Kamal, Musa R.; Gao, Furong; Patterson, Wayne Ian Conference paper
Control of Cavity Pressure during Packing, Society of Plastics Engineers
Annual Technical Conference (ANTEC'94), San Francisco, USA, (pt 1),May 1994, p. 701-705
Patterson, Wayne Ian; Gao, Furong; Kamal, Musa R. Conference paper
On-line Quality Monitoring Coupling Computer Analysis and Actual Measurement
Japanese Society of Polymer Processing, Tokyo, Japan, June 1994
Rowland, J.C.; Gao, Furong Conference paper

1993 3

Dynamics and Control of Surface and Mold Temperatures in Injection Molding
International Polymer Processing, v. 8, (2), 1993, p. 147-157
Gao, Furong; Patterson, W.I.; Kamal, M.R. Article
Adaptive Control of Cavity Pressure During Filling, Society of Plastics Engineers
Ann. Technical Conf. (ANTEC'93), pp. 565-569, New Orleans, USA, May 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper
Cavity Pressure Control of Injection Molding Filling
The Polymer Processing Society Conference, Tokyo, Japan, October 1993
Gao, Furong; Patterson, W.I.; Kamal, M.R. Conference paper

1992 1

A Versatile Computer Control System for Injection Molding
Society of Plastics Engineers, Annual Technical Conference (ANTEC'92), Detroit, USA, May 1992, p. 1887-1890
Gao, Furong; Fusser, H.; Patterson, W.I.; Kamal, M.R. Conference paper

1990 1

Mould Temperature Measurement and Control, Society of Plastics Engineers
Annual Technical Conference (ANTEC'90), Dallas, USA, May 1990, p. 227-232
Patterson, W.I.; Kamal, M.R.; Gao, Furong Conference paper






Teaching Assignment

---

2021-22 Winter 0 2021-22 Fall 1 2020-21 Summer 0 2020-21 Spring 2 2020-21 Winter 0 2020-21 Fall 1

---

CENG5230 Advanced Control and Data Science


CENG3110 Process Dynamics and Control
CENG4940 Chemical Engineering Industrial Project


CENG6000M Advanced Control and Data Science


No Teaching Assignments


No Teaching Assignments


No Teaching Assignments






Research Postgraduate (RPG) Supervision From January 2019 to December 2022 (As of 30 January 2022)

---

All Supervisions Current RPGs Graduated RPGs

---

Current RPGs

---

Doctor of Philosophy CHEN, Dongqi (co-supervision)
Sustainable Energy and Environment( 2021 - )

DING, Weilong
Chemical and Biomolecular Engineering( 2021 - )

HU, Moyu (co-supervision)
Sustainable Energy and Environment( 2021 - )

ZHENG, Wenjia (co-supervision)
Smart Manufacturing( 2021 - )

ZHANG, Zheng
Chemical and Biomolecular Engineering( 2020 - )

GAO, Kaihua
Chemical and Biomolecular Engineering( 2019 - )

HU, Huanjia (co-supervision)
Chemical and Biomolecular Engineering( 2019 - )

WANG, Xin
Chemical and Biomolecular Engineering( 2019 - )

ZHANG, Shuyu (co-supervision)
Chemical and Biomolecular Engineering( 2019 - )

---

Graduated RPGs

---

Doctor of Philosophy LIU, Boyang
Chemical and Biomolecular Engineering( Completed in 2020 )

TANG, Xiaopeng
Chemical and Biomolecular Engineering( Completed in 2020 )

QU, Hongyi
Chemical and Biomolecular Engineering( Completed in 2019 )

---

Master of Philosophy CHEN, Fangxuanzi
Chemical and Biomolecular Engineering( Completed in 2020 )









ProjectsFrom January 2020 to December 2022

---

All Projects 20 Leading Projects 10 Participating Projects 10

---

Learning-based control strategy design for batch processes


基于學習的批次過程控制策略設計 Leading


RGC - General Research Fund


Project Team (HKUST)
GAO Furong (Lead)


2021 -




Development and application of in-mold capacitance sensor system for high quality injection molding: topic# 1 Research and Implementation of High Precision Anti-jamming Capacitor Signal Transmission System


面向高品注塑的模內電容傳感器系統研發與應用: 子課題#1 高精度抗干擾電容信號變送系統研究與實現 Participating


Nanhai People's Government of Foshan


Project Team (HKUST)
XU Jiang (Lead)
GAO Furong


2021 -




Development and application of in-mold capacitance sensor system for high quality injection molding: topic# 2 Development and application of detection mechanism and system function of in-mold capacitance sensor


面向高品注塑的模內電容傳感器系統研發與應用: 子課題#2 模內電容傳感器檢測機理及系統功能研發與應用 Participating


Nanhai People's Government of Foshan


Project Team (HKUST)
GAO Furong
XU Jiang


2021 -




Development and application of intelligent sensing precision injection molds and systems


智能感知精密注塑模具及系統的研發與應用 Participating


Guangzhou Echom Science & Technology Co., Ltd., Guangzhou Economic and Technological Development Zone


Project Team (HKUST)
GAO Furong


2020 - , 2020 - 2021




Development and application demonstration of intelligent control system for PE/PPR water supply pipe production line


PE/PPR給水管件產線智能管控系統的研發與應用示范 Leading


Nanhai People's Government of Foshan


Project Team (HKUST)
GAO Furong (Lead)


2020 -




Prediction and Industrial Application of Lithium-Ion SOH System Based on Big Data Model


基于大數據模型預測鋰電SOH系統的研究和產業化應用 Leading


Department of Science and Technology of Guangdong Province


Project Team (HKUST)
GAO Furong (Lead)


2020 -




Prediction and Industrial Application of Lithium-Ion SOH System Based on Big Data Model


基于大數據模型預測鋰電SOH系統的研究和產業化應用 Participating


Department of Science and Technology of Guangdong Province


Project Team (HKUST)
GAO Furong


2020 -




Research on active vibration suppression of an axially driven stuctures and its applications


軸向驅動結構的振動主動抑制及應用研究 Participating


Department of Science and Technology of Guangdong Province


Project Team (HKUST)
GAO Furong


2020 - 2021




Intelligent decision-making and control technology for polymer product hybrid manufacturing line (Topic 5: R&D and application demonstration of intelligent control system for hybrid manufacturing production line under customized environment)


高分子產品混合制造產線智能決策與管控技術（課題5：定制環境下混合制造產線智能管控系統研發與應用示范） Leading


Ministry of Science and Technology of the People's Republic of China


Project Team (HKUST)
GAO Furong (Lead)


2019 -




R&D and industrialization of high-end equipment for robots based on vision technology


基于視覺技術的機器人高端裝備研發及產業化 Participating


Guangzhou Economic and Technological Development Zone, HKUST Fok Ying Tung Research Institute


Project Team (HKUST)
GAO Furong


2019 - 2020




Research, development and industrialization of high-speed and high-precision injection molding collaborative system


高速高精協同注塑系統的研發及產業化 Participating


GUANGZHOU BORCH MACHINERY CO., LTD., Guangzhou Municipal Science and Technology Bureau


Project Team (HKUST)
GAO Furong


2018 -




Modeling methods for exploring the repeatability of batch-like processes


探索批次過程重復性的建模方法 Leading


RGC - General Research Fund


Project Team (HKUST)
GAO Furong (Lead)


2018 - 2021




R&D and industrialization of precision medical catheters and their advanced production control technology


精密醫用導管及其先進生產控制技術的研發與產業化 Participating


Nanhai People's Government of Foshan


Project Team (HKUST)
GAO Furong


2018 - 2021




Polymer Processing & Control Leading


Guangdong Olger Precise Machinery Technology Co., Ltd.


Project Team (HKUST)
GAO Furong (Lead)


2017 -




R&D of the continuous roll forming machine for new ceramic powder


新型陶瓷粉料連續預壓輥壓成型機的研發 Participating


Department of Science and Technology of Guangdong Province, Foshan SAPFIT Electromechanical Co., Ltd


Project Team (HKUST)
GAO Furong


2016 - 2020




Polymer processing automation


聚合物加工過程控制 Leading


Shantou Olger Packing Machinery Co., Ltd.


Project Team (HKUST)
GAO Furong (Lead)


2015 -




Digital manufacturing technology research and industrial application of Ni-MH battery


鎳氫電池數字化制造技術研發與產業化應用 Participating


Department of Science and Technology of Guangdong Province, GP Batteries International Limited (Dongguan)


Project Team (HKUST)
GAO Furong


2015 -




Polymer processing control and monitoring Leading


Jiangsu Shanhu Cable Co., Ltd.


Project Team (HKUST)
GAO Furong (Lead)


2006 -




Injection molding research Leading


Chen Hsong Machinery Co., Ltd.


Project Team (HKUST)
GAO Furong (Lead)


2001 - 2021




Intelligent and advanced control of injection molding Leading


MOOG Japan Ltd.


Project Team (HKUST)
GAO Furong (Lead)


1998 - 2021