戴翌龙导师主页

---

基本信息

---

姓名: 戴翌龙
职称:
单位电话:
电子信箱: daiyilong@xtu.edu.cn
办公室: 二教511
个人主页:

个人简介

---

个人简介

---

戴翌龙，男，汉族，1989年2月生，湖南长沙人，中共党员，工学博士，硕士生导师。主要从事于镁，锌合金腐蚀性能与力学性能研究以及铝基电子封装材料的研究工作。



学习工作经历

---

2019/9-至今 湘潭大学材料学院讲师/硕士生导师
2014/9—2019/6 中南大学 材料学博士
2011/9—2014/5 中南大学 材料工程硕士
2007/9—2011/6中南大学 材料科学与工程 学士



主讲课程

---

材料分析方法，材料腐蚀与防护，工程数学，材料与人类健康（通识课）

研究方向

---

可降解金属医用材料，镁合金，锌合金
电子封装材料，铝基复合材料


科研项目

---

1. 2020年湖南省优秀博士后创新人才项目，主持 ，40万
2. 2020年省教育厅一般项目-超高压条件的医用Zn-Li合金的凝固与固态相变特性及其力学性能研究，主持，2万
3. 2019年湘潭大学启动经费项目-医用可吸收锌合金的生物适配性研究，主持，10万



主要代表性论文

---

1．Dai Y, Zhang Y, Liu H, Fang H, Li D, Xu X, Yan Y, Chen L, Lu Y, Yu K. Mechanical strengthening mechanism of Zn-Li alloy and its mini tube as potential absorbable stent material. Materials Letters. 235 (2019) 220-3.
2．Dai Y, Tang Y, Xu X, Luo Z, Zhang Y, Li Z, Lin Z, Zhao S, Zeng M, Sun B, Cheng L, Zhu J, Xiong Z, Long H, Zhu Y, Yu K. Evaluation of the mechanisms and effects of Mg-Ag-Y alloy on the tumor growth and metastasis of the MG63 osteosarcoma cell line. Journal Of Biomedical Materials Research Part B-Applied Biomaterials. 107 (2019) 2537-48.
3．Yu K,Dai Y, Luo Z, Long H, Zeng M, Li Z, Zhu J, Cheng L, Zhang Y, Liu H, Zhu Y. In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant. Journal Of Biomedical Materials Research Part A. 106 (2018) 2059-69.（导师一作）
4．Dai Y, Liu H, Tang Y, Xu X, Long H, Yan Y, Luo Z, Zhang Y, Yu K, Zhu Y. A Potential Biodegradable Mg-Y-Ag Implant with Strengthened Antimicrobial Properties in Orthopedic Applications. Metals. 8 (2018).
5．Dai Y, Lu Y, Li D, Yu K, Jiang D, Yan Y, Chen L, Xiao T. Effects of polycaprolactone coating on the biodegradable behavior and cytotoxicity of Mg-6%Zn-10%Ca-3(PO4)(2) composite in simulated body fluid. Materials Letters. 198 (2017) 118-20.
6．Dai Y-l, Yu K, Chen L-j, Chen C, Qiao X-y, Yan Y. In vitro corrosion behavior and cytotoxicity property of magnesium matrix composite with chitosan coating. Journal Of Central South University. 22 (2015) 829-34.
7．Dai Y, Yu K, Teng F, Xiong H, Fan S. The Effects of Rolling Deformation on Al-27%Si Alloys Prepared by Powder Metallurgy for Electronic Packaging Application. 16th International Conference on Electronic Packaging Technology 2015.（国际会议论文）
8．Dai Y, Teng F, Yu K. Effect of SiCp particle size and anneal on properties of Al/SiC composites prepared by powder liquid -phase sintering. 16th International Conference on Electronic Packaging Technology 2015.（国际会议论文）
9．Jiang D,Dai Y, Zhang Y, Yan Y, Ma J, Li D, Yu K. Effects of Heat Treatment on Microstructure, Mechanical Properties, Corrosion Resistance and Cytotoxicity of ZM21 Magnesium Alloy as Biomaterials. Journal Of Materials Engineering And Performance. 28 (2019) 33-43.
10．Jiang D,Dai Y, Zhang Y, Liu C, Yu K. Effects of Strontium addition on microstructure, mechanical properties, corrosion properties and cytotoxicity of Mg-1Zn-1Mn alloy. Materials Research Express. 6 (2019).
11．Ma J,Dai Y, Xu X, Xu X, Fang H, Liu H, Zhang Y, Yu K. Microstructures and Properties of Al-27%Si Composites: Influence of Rolling and Annealing. Materials Transactions. 59 (2018) 724-9.
12．Liu P, Zhang D, Dai Y, Lin J, Li Y, Wen C. Microstructure, mechanical properties, degradation behavior, and biocompatibility of porous Fe-Mn alloys fabricated by sponge impregnation and sintering techniques. Acta biomaterialia. 114(2020)485-96.
13．Y Yan, X Chu, X Luo, X Xu, Y Zhang, Y Dai, D Li, L Chen, T Xiao, K Yu. A homogenous microstructural Mg-based matrix model for orthopedic application with generating uniform and smooth corrosion product layer in Ringer's solution: Study on biodegradable behavior of Mg-Zn alloys prepared by powder metallurgy as a case. Journal of Magnesium and Alloys. 9 (2021) 225-240.
14．Li D, Yuan Q, Yu K, Xiao T, Liu L,Dai Y, Xiong L, Zhang B, Li A. Mg-Zn-Mn alloy extract induces the angiogenesis of human umbilical vein endothelial cells via FGF/FGFR signaling pathway. Biochemical and biophysical research communications.514 (2019) 618-624.
15．LiD,YuK, XiaoT,DaiY,LiuL,LiH, JiangD, XiongL. LOC/miR‐138‐5p/BMPR2 Axis Modulates Mg‐Mediated Osteogenic Differentiation in Rat Femoral Fracture Model and Rat Primary Bone Marrow Stromal Cells. J. Cell. Physiol.234 (2019) 21316-21330.
16．Zhang Y, Yan Y, Xu X, Lu Y, Chen L, Li D,Dai Y, Kang Y, Yu K. Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration. Materials science & engineering C, Materials for biological applications. 99 (2019) 1021-34.
17．Zhang Y, Lu Y, Xu X, Chen L, Xiao T, Luo X, Yan Y, Li D,Dai Y, Yu K. Microstructure, Corrosion Behaviors in Different Simulated Body Fluids and Cytotoxicity of Zn–Li Alloy as Biodegradable Material. Materials Transactions. 60 (2019) 583-6.
18．Zhu H, Liu H, Fang H,Dai Y, Li L, Xu X, Yan Y, Yu K. Electrochemical performance of Mg-Al-Zn and Mg-Al-Zn-Ce alloys as anodes for Mg-air battery. International Journal Of Electrochemical Science. 13 (2018) 11180-92.
19．Yan Y, Liu H, Fang H, Yu K, Zhang T, Xu X, Zhang Y,Dai Y. Effects of the Intermetallic Phases on Microstructure and Properties of Biodegradable Magnesium Matrix and Zinc Matrix Prepared by Powder Metallurgy. Materials Transactions. 59 (2018) 1837-44.
20．Qiao X, Yu K, Chen L,Dai Y, Xiao T, Deng Y, Yan Y. Influence of Hot Extrusion and Aging Treatment on the Properties of Biodegradable Mg-Zn-Y Alloy. Rare Metal Materials And Engineering. 47 (2018) 773-9.
21．Yu K, Xiong H,Dai Y, Teng F, Fan S, Qiao X, Wen L. Mechanical Properties and Formability of Ultrasonic Treated Twin Roll Casting Magnesium Alloy Sheet. Rare Metal Materials And Engineering. 46 (2017) 622-6.
22．Yan Y, Cao H, Kang Y, Yu K, Xiao T, Luo J, Deng Y, Fang H, Xiong H,Dai Y. Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy. Journal Of Alloys And Compounds. 693 (2017) 1277-89.
23．Yan Y, Kang Y, Li D, Yu K, Xiao T, Deng Y, Dai H,Dai Y, Xiong H, Fang H. Improvement of the mechanical properties and corrosion resistance of biodegradable (beta-Ca-3(PO4)(2)/Mg-Zn composites prepared by powder metallurgy: the adding beta-Ca-3(PO4)(2), hot extrusion and aging treatment. Materials Science & Engineering C-Materials for Biological Applications. 74 (2017) 582-96.
24．Xiong H, Yu K, Yin X,Dai Y, Yan Y, Zhu H. Effects of microstructure on the electrochemical discharge behavior of Mg-6wt%Al-1wt%Sn alloy as anode for Mg-air primary battery. Journal Of Alloys And Compounds. 708 (2017) 652-61.
25．Xiong H, Li L, Zhang Y, Yu K, Fang H,Dai Y, Dai H. Microstructure and Discharge Behavior of Mg-Al-Sn-In Anode Alloys. Journal Of the Electrochemical Society. 164 (2017) A1745-A54.
26．Fan S-f, Zhang T, Yu K, Fang H-j, Xiong H-q,Dai Y-l, Ma J-j, Jiang D-y, Zhu H-l. Compressive properties and energy absorption characteristics of open-cell nickel foams. Transactions Of Nonferrous Metals Society Of China. 27 (2017) 117-24.
27．Yin, X.; Yu, K.; Zhang, T.; Fang, H.; Dai, H.; Xiong, H.Q.;Dai, Y.L. Influence of rolling processing on discharge performance of Al-0.5Mg-0.1Sn-0.05Ga-0.05In alloy as anode for al-air battery. INT J ELECTROCHEM SC 2017, 12, 4150-4163.
28．Yu K, Xiong H,Dai Y, Teng F, Fan S, Qiao X, Wen L. Bonding Process and Application Properties of an Al-Ni Layer Composite Sheet for Lithium-ion Battery Packaging. Rare Metal Materials And Engineering. 45 (2016) 1100-5.
29．Xiong H, Yu K, Wen L, Yao S,Dai Y, Wang Z. Microstructure and Mechanical Properties of AA1235 Aluminum Foil Stocks Produced Directly from Electrolytic Aluminum Melt. Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science. 47 (2016) 731-9.
30．Xiong H, Yin X, Yan Y,Dai Y, Fan S, Qiao X, Yu K. Corrosion and Discharge Behaviors of Al-Mg-Sn-Ga-In in Different Solutions. Journal Of Materials Engineering And Performance. 25 (2016) 3456-64.
31．Wen L, Yu K, Xiong H,Dai Y, Yang S, Qiao X, Teng F, Fan S. Composition optimization and electrochemical properties of Mg-Al-Pb-(Zn) alloys as anodes for seawater activated battery. Electrochimica Acta. 194 (2016) 40-51.
32．Teng F, Yu K, Luo J, Fang H-j, Shi C-l,Dai Y-l, Xiong H-q. Microstructures and properties of Al-50%SiC composites for electronic packaging applications. Transactions Of Nonferrous Metals Society Of China. 26 (2016) 2647-52.
33．Zhao J, Chen L-j, Yu K, Chen C,Dai Y-l,Qiao X-y, Yan Y, Yu Z-m. Effects of chitosan coating on biocompatibility of Mg-6%Zn-10% Ca-3(PO4)(2) implant. Transactions Of Nonferrous Metals Society Of China. 25 (2015) 824-31.
34．Yu K, Yang S-h, Xiong H-q, Wen L,Dai Y-l, Teng F, Fan S-f. Effects of gallium on electrochemical discharge behavior of Al-Mg-Sn-In alloy anode for air cell or water-activated cell. Transactions Of Nonferrous Metals Society Of China. 25 (2015) 3747-52.
35．Yu K, Xiong H-q, Wen L,Dai Y-l, Yang S-h, Fan S-f, Teng F, Qiao X-y. Discharge behavior and electrochemical properties of Mg-Al-Sn alloy anode for seawater activated battery. Transactions Of Nonferrous Metals Society Of China. 25 (2015) 1234-40.
36．Chen L, Zhao J, Yu K, Chen C,Dai Y, Qiao X, Yu Z. Improving of in vitro Biodegradation Resistance in a Chitosan Coated Magnesium Bio-composite. Rare Metal Materials And Engineering. 44 (2015) 1862-5.
37．陈畅,陈良建,余琨,戴翌龙,邵春生,赵俊,曹君,谢丽子,刘蓓蕾.高分子涂层和氮化钛涂层对Mg-6%Zn-10%(β-TCP)耐腐蚀性能的影响[J].中南大学学报(自然科学版),2015,46(10):3611-3618.
38．Zhao J, Chen L, Yu K, Chen C,Dai Y, Qiao X, Yan Y. Biodegradation performance of a chitosan coated magnesium-zinc-tricalcium phosphate composite as an implant. Biointerphases. 9 (2014).
39．Huang Q, Yu K, Yang SH, Wen L,Dai YL, Qiao XY. Effects of Al and Sn on electrochemical properties of Mg-6% Al-1% Sn (mass fraction) magnesium alloy as anode in 3.5% NaCl solution. Journal Of Central South University. 21 (2014) 4409-14.
40．Yu K, Chen L, Zhao J, Wang R,Dai Y, Huang Q. In vivo biocompatibility and biodegradation of a Mg-15%Ca-3(PO4)(2) composite as an implant material. Materials Letters. 98 (2013) 22-5.
41．Yu K, Chen L, Zhao J, Li S, Dai Y, Huang Q, Yu Z. In vitro corrosion behavior and in vivo biodegradation of biomedical beta-Ca-3(PO4)(2)/Mg-Zn composites. Acta biomaterialia. 8 (2012) 2845-55.
42．Yu K, Huang Q, Zhao J,Dai Y-l. Electrochemical properties of magnesium alloy anodes discharged in seawater. Transactions Of Nonferrous Metals Society Of China. 22 (2012) 2184-90.




发明专利

---

1.授权CN5.4:一种在镁基复合材料表面制备Ti/TiO₂或TiN生物相容性膜层的方法
2.授权CN8.8:模拟生物体环境进行材料力学性能测试的体液循环装置
3.授权CN4.0:可降解的骨固定用镁合金植入材料及制备方法
4.授权CN3.7:一种双层钛铝铝硅复合材料及其制备方法和应用
5.申请号CN9.5：一种镁合金丝材的制备方法
6.申请号CN8.4：一种引导骨再生的医用可降解锌合金薄片及其制备方法
7.申请号 CN0.7：一种表面改性镁合金骨植入材料及制备方法
8. 申请号 CN9.2： 一种可降解的Zn-Ag系锌合金及其制备方法与应用
9. 申请号 CN3.1： 一种医用可降解的锌基复合材料及其制备方法与应用







社会兼职

---

教育部学位中心评审专家，湖南省生物材料学会干事，Acta biomaterilia, Bioactive materials, Journal of magnesium alloys, Journal of alloys and compumds等杂志审稿人